From: Philip Tricca <flihp@twobit.us>
To: Philip Tricca <flihp@twobit.us>
Cc: yocto@yoctoproject.org
Subject: Re: [meta-selinux][PATCH] Bump versions to catch up with master in oe-core.
Date: Fri, 15 Nov 2013 11:06:38 -0500 [thread overview]
Message-ID: <5286468E.1090209@twobit.us> (raw)
In-Reply-To: <1384487599-13222-1-git-send-email-flihp@twobit.us>
I missed the significant change in tar w/r to xattrs and acls. Fixing
that up now.
- Philip
On 11/14/2013 10:53 PM, Philip Tricca wrote:
> openssh 6.2p2 -> 6.4p1
> glib-2.0 2.38.0 -> 2.38.1
> at 3.1.13 -> 3.1.14
> sudo 1.8.7 -> 1.8.8
> tar 1.26 -> 1.27
> mesa 9.1.6 -> 9.2.2
> gnupg 2.0.21 -> 2.0.22
>
> Signed-off-by: Philip Tricca <flihp@twobit.us>
> ---
> .../openssh/openssh_6.2p2.bbappend | 13 --
> .../openssh/openssh_6.4p1.bbappend | 13 ++
> recipes-core/glib-2.0/glib-2.0_2.38.0.bbappend | 1 -
> recipes-core/glib-2.0/glib-2.0_2.38.1.bbappend | 1 +
> recipes-extended/at/at/at-3.1.13-selinux.patch | 184 --------------------
> recipes-extended/at/at/at-3.1.14-selinux.patch | 184 ++++++++++++++++++++
> recipes-extended/at/at_3.1.13.bbappend | 7 -
> recipes-extended/at/at_3.1.14.bbappend | 7 +
> recipes-extended/sudo/sudo_1.8.7.bbappend | 3 -
> recipes-extended/sudo/sudo_1.8.8.bbappend | 3 +
> recipes-extended/tar/tar_1.26.bbappend | 15 --
> recipes-extended/tar/tar_1.27.bbappend | 15 ++
> recipes-graphics/mesa/mesa_9.1.6.bbappend | 1 -
> recipes-graphics/mesa/mesa_9.2.2.bbappend | 1 +
> recipes-support/gnupg/gnupg_2.0.21.bbappend | 5 -
> recipes-support/gnupg/gnupg_2.0.22.bbappend | 5 +
> 16 files changed, 229 insertions(+), 229 deletions(-)
> delete mode 100644 recipes-connectivity/openssh/openssh_6.2p2.bbappend
> create mode 100644 recipes-connectivity/openssh/openssh_6.4p1.bbappend
> delete mode 100644 recipes-core/glib-2.0/glib-2.0_2.38.0.bbappend
> create mode 100644 recipes-core/glib-2.0/glib-2.0_2.38.1.bbappend
> delete mode 100644 recipes-extended/at/at/at-3.1.13-selinux.patch
> create mode 100644 recipes-extended/at/at/at-3.1.14-selinux.patch
> delete mode 100644 recipes-extended/at/at_3.1.13.bbappend
> create mode 100644 recipes-extended/at/at_3.1.14.bbappend
> delete mode 100644 recipes-extended/sudo/sudo_1.8.7.bbappend
> create mode 100644 recipes-extended/sudo/sudo_1.8.8.bbappend
> delete mode 100644 recipes-extended/tar/tar_1.26.bbappend
> create mode 100644 recipes-extended/tar/tar_1.27.bbappend
> delete mode 100644 recipes-graphics/mesa/mesa_9.1.6.bbappend
> create mode 100644 recipes-graphics/mesa/mesa_9.2.2.bbappend
> delete mode 100644 recipes-support/gnupg/gnupg_2.0.21.bbappend
> create mode 100644 recipes-support/gnupg/gnupg_2.0.22.bbappend
>
> diff --git a/recipes-connectivity/openssh/openssh_6.2p2.bbappend b/recipes-connectivity/openssh/openssh_6.2p2.bbappend
> deleted file mode 100644
> index 223b8cf..0000000
> --- a/recipes-connectivity/openssh/openssh_6.2p2.bbappend
> +++ /dev/null
> @@ -1,13 +0,0 @@
> -PR .= ".5"
> -
> -inherit with-selinux
> -
> -FILESEXTRAPATHS_prepend := "${@target_selinux(d, '${THISDIR}/files:')}"
> -
> -# There is no distro feature just for audit. If we want it,
> -# uncomment the following.
> -#
> -#PACKAGECONFIG += "${@target_selinux(d, 'audit')}"
> -
> -PACKAGECONFIG[audit] = "--with-audit=linux,--without-audit,audit,"
> -
> diff --git a/recipes-connectivity/openssh/openssh_6.4p1.bbappend b/recipes-connectivity/openssh/openssh_6.4p1.bbappend
> new file mode 100644
> index 0000000..223b8cf
> --- /dev/null
> +++ b/recipes-connectivity/openssh/openssh_6.4p1.bbappend
> @@ -0,0 +1,13 @@
> +PR .= ".5"
> +
> +inherit with-selinux
> +
> +FILESEXTRAPATHS_prepend := "${@target_selinux(d, '${THISDIR}/files:')}"
> +
> +# There is no distro feature just for audit. If we want it,
> +# uncomment the following.
> +#
> +#PACKAGECONFIG += "${@target_selinux(d, 'audit')}"
> +
> +PACKAGECONFIG[audit] = "--with-audit=linux,--without-audit,audit,"
> +
> diff --git a/recipes-core/glib-2.0/glib-2.0_2.38.0.bbappend b/recipes-core/glib-2.0/glib-2.0_2.38.0.bbappend
> deleted file mode 100644
> index 8c11cac..0000000
> --- a/recipes-core/glib-2.0/glib-2.0_2.38.0.bbappend
> +++ /dev/null
> @@ -1 +0,0 @@
> -inherit enable-selinux
> diff --git a/recipes-core/glib-2.0/glib-2.0_2.38.1.bbappend b/recipes-core/glib-2.0/glib-2.0_2.38.1.bbappend
> new file mode 100644
> index 0000000..8c11cac
> --- /dev/null
> +++ b/recipes-core/glib-2.0/glib-2.0_2.38.1.bbappend
> @@ -0,0 +1 @@
> +inherit enable-selinux
> diff --git a/recipes-extended/at/at/at-3.1.13-selinux.patch b/recipes-extended/at/at/at-3.1.13-selinux.patch
> deleted file mode 100644
> index 5a08a43..0000000
> --- a/recipes-extended/at/at/at-3.1.13-selinux.patch
> +++ /dev/null
> @@ -1,184 +0,0 @@
> -From: Xin Ouyang <Xin.Ouyang@windriver.com>
> -Date: Wed, 13 Jun 2012 14:47:54 +0800
> -Subject: [PATCH] at: atd add SELinux support.
> -
> -Upstream-Status: Inappropriate [configuration]
> -
> -Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
> ----
> - Makefile.in | 1 +
> - atd.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> - config.h.in | 3 ++
> - configure.ac | 8 +++++
> - 4 files changed, 95 insertions(+), 0 deletions(-)
> -
> -diff --git a/Makefile.in b/Makefile.in
> -index 10e7ed2..35792cd 100644
> ---- a/Makefile.in
> -+++ b/Makefile.in
> -@@ -39,6 +39,7 @@ LIBS = @LIBS@
> - LIBOBJS = @LIBOBJS@
> - INSTALL = @INSTALL@
> - PAMLIB = @PAMLIB@
> -+SELINUXLIB = @SELINUXLIB@
> -
> - CLONES = atq atrm
> - ATOBJECTS = at.o panic.o perm.o posixtm.o y.tab.o lex.yy.o
> -@@ -72,7 +72,7 @@ at: $(ATOBJECTS)
> - $(LN_S) -f at atrm
> -
> - atd: $(RUNOBJECTS)
> -- $(CC) $(CFLAGS) -o atd $(RUNOBJECTS) $(LIBS) $(PAMLIB) $(LDFLAGS)
> -+ $(CC) $(CFLAGS) -o atd $(RUNOBJECTS) $(LIBS) $(PAMLIB) $(SELINUXLIB) $(LDFLAGS)
> -
> - y.tab.c y.tab.h: parsetime.y
> - $(YACC) -d parsetime.y
> -diff --git a/atd.c b/atd.c
> -index af3e577..463124f 100644
> ---- a/atd.c
> -+++ b/atd.c
> -@@ -83,6 +83,14 @@
> - #include "getloadavg.h"
> - #endif
> -
> -+#ifdef WITH_SELINUX
> -+#include <selinux/selinux.h>
> -+#include <selinux/get_context_list.h>
> -+int selinux_enabled = 0;
> -+#include <selinux/flask.h>
> -+#include <selinux/av_permissions.h>
> -+#endif
> -+
> - /* Macros */
> -
> - #define BATCH_INTERVAL_DEFAULT 60
> -@@ -195,6 +203,70 @@ myfork()
> - #define fork myfork
> - #endif
> -
> -+#ifdef WITH_SELINUX
> -+static int
> -+set_selinux_context(const char *name, const char *filename)
> -+{
> -+ security_context_t user_context=NULL;
> -+ security_context_t file_context=NULL;
> -+ struct av_decision avd;
> -+ int retval=-1;
> -+ char *seuser=NULL;
> -+ char *level=NULL;
> -+
> -+ if (getseuserbyname(name, &seuser, &level) == 0) {
> -+ retval=get_default_context_with_level(seuser, level, NULL, &user_context);
> -+ free(seuser);
> -+ free(level);
> -+ if (retval) {
> -+ if (security_getenforce()==1) {
> -+ perr("execle: couldn't get security context for user %s\n", name);
> -+ } else {
> -+ syslog(LOG_ERR, "execle: couldn't get security context for user %s\n", name);
> -+ return -1;
> -+ }
> -+ }
> -+ }
> -+
> -+ /*
> -+ * Since crontab files are not directly executed,
> -+ * crond must ensure that the crontab file has
> -+ * a context that is appropriate for the context of
> -+ * the user cron job. It performs an entrypoint
> -+ * permission check for this purpose.
> -+ */
> -+ if (fgetfilecon(STDIN_FILENO, &file_context) < 0)
> -+ perr("fgetfilecon FAILED %s", filename);
> -+
> -+ retval = security_compute_av(user_context,
> -+ file_context,
> -+ SECCLASS_FILE,
> -+ FILE__ENTRYPOINT,
> -+ &avd);
> -+ freecon(file_context);
> -+ if (retval || ((FILE__ENTRYPOINT & avd.allowed) != FILE__ENTRYPOINT)) {
> -+ if (security_getenforce()==1) {
> -+ perr("Not allowed to set exec context to %s for user %s\n", user_context,name);
> -+ } else {
> -+ syslog(LOG_ERR, "Not allowed to set exec context to %s for user %s\n", user_context,name);
> -+ retval = -1;
> -+ goto err;
> -+ }
> -+ }
> -+ if (setexeccon(user_context) < 0) {
> -+ if (security_getenforce()==1) {
> -+ perr("Could not set exec context to %s for user %s\n", user_context,name);
> -+ retval = -1;
> -+ } else {
> -+ syslog(LOG_ERR, "Could not set exec context to %s for user %s\n", user_context,name);
> -+ }
> -+ }
> -+err:
> -+ freecon(user_context);
> -+ return 0;
> -+}
> -+#endif
> -+
> - static void
> - run_file(const char *filename, uid_t uid, gid_t gid)
> - {
> -@@ -435,6 +507,13 @@ run_file(const char *filename, uid_t uid, gid_t gid)
> -
> - chdir("/");
> -
> -+#ifdef WITH_SELINUX
> -+ if (selinux_enabled > 0) {
> -+ if (set_selinux_context(pentry->pw_name, filename) < 0)
> -+ perr("SELinux Failed to set context\n");
> -+ }
> -+#endif
> -+
> - if (execle("/bin/sh", "sh", (char *) NULL, nenvp) != 0)
> - perr("Exec failed for /bin/sh");
> -
> -@@ -707,6 +786,10 @@ main(int argc, char *argv[])
> - struct passwd *pwe;
> - struct group *ge;
> -
> -+#ifdef WITH_SELINUX
> -+ selinux_enabled = is_selinux_enabled();
> -+#endif
> -+
> - /* We don't need root privileges all the time; running under uid and gid
> - * daemon is fine.
> - */
> -diff --git a/configure.ac b/configure.ac
> -index 2db7b65..5ecc35a 100644
> ---- a/configure.ac
> -+++ b/configure.ac
> -@@ -94,6 +94,18 @@ AC_CHECK_HEADERS(security/pam_appl.h, [
> - fi])
> - fi
> -
> -+AC_ARG_WITH([selinux],
> -+ [AS_HELP_STRING([--without-selinux], [without SELinux support])])
> -+
> -+if test "x$with_selinux" != xno; then
> -+AC_CHECK_HEADERS(selinux/selinux.h, [
> -+ SELINUXLIB="-lselinux"
> -+ AC_DEFINE(WITH_SELINUX, 1, [Define to 1 for SELinux support])],
> -+ [if test "x$with_selinux" = xyes; then
> -+ AC_MSG_ERROR([SELinux selected but selinux/selinux.h not found])
> -+ fi])
> -+fi
> -+
> - dnl Checking for programs
> -
> - AC_PATH_PROG(SENDMAIL, sendmail, , $PATH:/usr/lib:/usr/sbin )
> -@@ -104,6 +116,7 @@ fi
> -
> - AC_SUBST(MAIL_CMD)
> - AC_SUBST(PAMLIB)
> -+AC_SUBST(SELINUXLIB)
> -
> - AC_MSG_CHECKING(etcdir)
> - AC_ARG_WITH(etcdir,
> ---
> -1.7.5.4
> -
> diff --git a/recipes-extended/at/at/at-3.1.14-selinux.patch b/recipes-extended/at/at/at-3.1.14-selinux.patch
> new file mode 100644
> index 0000000..4e5e18c
> --- /dev/null
> +++ b/recipes-extended/at/at/at-3.1.14-selinux.patch
> @@ -0,0 +1,184 @@
> +From: Xin Ouyang <Xin.Ouyang@windriver.com>
> +Date: Wed, 13 Jun 2012 14:47:54 +0800
> +Subject: [PATCH] at: atd add SELinux support.
> +
> +Upstream-Status: Inappropriate [configuration]
> +
> +Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
> +---
> + Makefile.in | 1 +
> + atd.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> + config.h.in | 3 ++
> + configure.ac | 8 +++++
> + 4 files changed, 95 insertions(+), 0 deletions(-)
> +
> +diff --git a/Makefile.in b/Makefile.in
> +index 10e7ed2..35792cd 100644
> +--- a/Makefile.in
> ++++ b/Makefile.in
> +@@ -39,6 +39,7 @@ LIBS = @LIBS@
> + LIBOBJS = @LIBOBJS@
> + INSTALL = @INSTALL@
> + PAMLIB = @PAMLIB@
> ++SELINUXLIB = @SELINUXLIB@
> +
> + CLONES = atq atrm
> + ATOBJECTS = at.o panic.o perm.o posixtm.o y.tab.o lex.yy.o
> +@@ -72,7 +72,7 @@ at: $(ATOBJECTS)
> + $(LN_S) -f at atrm
> +
> + atd: $(RUNOBJECTS)
> +- $(CC) $(LDFLAGS) -o atd $(RUNOBJECTS) $(LIBS) $(PAMLIB)
> ++ $(CC) $(LDFLAGS) -o atd $(RUNOBJECTS) $(LIBS) $(PAMLIB) $(SELINUXLIB)
> +
> + y.tab.c y.tab.h: parsetime.y
> + $(YACC) -d parsetime.y
> +diff --git a/atd.c b/atd.c
> +index af3e577..463124f 100644
> +--- a/atd.c
> ++++ b/atd.c
> +@@ -83,6 +83,14 @@
> + #include "getloadavg.h"
> + #endif
> +
> ++#ifdef WITH_SELINUX
> ++#include <selinux/selinux.h>
> ++#include <selinux/get_context_list.h>
> ++int selinux_enabled = 0;
> ++#include <selinux/flask.h>
> ++#include <selinux/av_permissions.h>
> ++#endif
> ++
> + /* Macros */
> +
> + #define BATCH_INTERVAL_DEFAULT 60
> +@@ -195,6 +203,70 @@ myfork()
> + #define fork myfork
> + #endif
> +
> ++#ifdef WITH_SELINUX
> ++static int
> ++set_selinux_context(const char *name, const char *filename)
> ++{
> ++ security_context_t user_context=NULL;
> ++ security_context_t file_context=NULL;
> ++ struct av_decision avd;
> ++ int retval=-1;
> ++ char *seuser=NULL;
> ++ char *level=NULL;
> ++
> ++ if (getseuserbyname(name, &seuser, &level) == 0) {
> ++ retval=get_default_context_with_level(seuser, level, NULL, &user_context);
> ++ free(seuser);
> ++ free(level);
> ++ if (retval) {
> ++ if (security_getenforce()==1) {
> ++ perr("execle: couldn't get security context for user %s\n", name);
> ++ } else {
> ++ syslog(LOG_ERR, "execle: couldn't get security context for user %s\n", name);
> ++ return -1;
> ++ }
> ++ }
> ++ }
> ++
> ++ /*
> ++ * Since crontab files are not directly executed,
> ++ * crond must ensure that the crontab file has
> ++ * a context that is appropriate for the context of
> ++ * the user cron job. It performs an entrypoint
> ++ * permission check for this purpose.
> ++ */
> ++ if (fgetfilecon(STDIN_FILENO, &file_context) < 0)
> ++ perr("fgetfilecon FAILED %s", filename);
> ++
> ++ retval = security_compute_av(user_context,
> ++ file_context,
> ++ SECCLASS_FILE,
> ++ FILE__ENTRYPOINT,
> ++ &avd);
> ++ freecon(file_context);
> ++ if (retval || ((FILE__ENTRYPOINT & avd.allowed) != FILE__ENTRYPOINT)) {
> ++ if (security_getenforce()==1) {
> ++ perr("Not allowed to set exec context to %s for user %s\n", user_context,name);
> ++ } else {
> ++ syslog(LOG_ERR, "Not allowed to set exec context to %s for user %s\n", user_context,name);
> ++ retval = -1;
> ++ goto err;
> ++ }
> ++ }
> ++ if (setexeccon(user_context) < 0) {
> ++ if (security_getenforce()==1) {
> ++ perr("Could not set exec context to %s for user %s\n", user_context,name);
> ++ retval = -1;
> ++ } else {
> ++ syslog(LOG_ERR, "Could not set exec context to %s for user %s\n", user_context,name);
> ++ }
> ++ }
> ++err:
> ++ freecon(user_context);
> ++ return 0;
> ++}
> ++#endif
> ++
> + static void
> + run_file(const char *filename, uid_t uid, gid_t gid)
> + {
> +@@ -435,6 +507,13 @@ run_file(const char *filename, uid_t uid, gid_t gid)
> +
> + chdir("/");
> +
> ++#ifdef WITH_SELINUX
> ++ if (selinux_enabled > 0) {
> ++ if (set_selinux_context(pentry->pw_name, filename) < 0)
> ++ perr("SELinux Failed to set context\n");
> ++ }
> ++#endif
> ++
> + if (execle("/bin/sh", "sh", (char *) NULL, nenvp) != 0)
> + perr("Exec failed for /bin/sh");
> +
> +@@ -707,6 +786,10 @@ main(int argc, char *argv[])
> + struct passwd *pwe;
> + struct group *ge;
> +
> ++#ifdef WITH_SELINUX
> ++ selinux_enabled = is_selinux_enabled();
> ++#endif
> ++
> + /* We don't need root privileges all the time; running under uid and gid
> + * daemon is fine.
> + */
> +diff --git a/configure.ac b/configure.ac
> +index 2db7b65..5ecc35a 100644
> +--- a/configure.ac
> ++++ b/configure.ac
> +@@ -94,6 +94,18 @@ AC_CHECK_HEADERS(security/pam_appl.h, [
> + fi])
> + fi
> +
> ++AC_ARG_WITH([selinux],
> ++ [AS_HELP_STRING([--without-selinux], [without SELinux support])])
> ++
> ++if test "x$with_selinux" != xno; then
> ++AC_CHECK_HEADERS(selinux/selinux.h, [
> ++ SELINUXLIB="-lselinux"
> ++ AC_DEFINE(WITH_SELINUX, 1, [Define to 1 for SELinux support])],
> ++ [if test "x$with_selinux" = xyes; then
> ++ AC_MSG_ERROR([SELinux selected but selinux/selinux.h not found])
> ++ fi])
> ++fi
> ++
> + dnl Checking for programs
> +
> + AC_PATH_PROG(SENDMAIL, sendmail, , $PATH:/usr/lib:/usr/sbin )
> +@@ -104,6 +116,7 @@ fi
> +
> + AC_SUBST(MAIL_CMD)
> + AC_SUBST(PAMLIB)
> ++AC_SUBST(SELINUXLIB)
> +
> + AC_MSG_CHECKING(etcdir)
> + AC_ARG_WITH(etcdir,
> +--
> +1.7.5.4
> +
> diff --git a/recipes-extended/at/at_3.1.13.bbappend b/recipes-extended/at/at_3.1.13.bbappend
> deleted file mode 100644
> index f30abab..0000000
> --- a/recipes-extended/at/at_3.1.13.bbappend
> +++ /dev/null
> @@ -1,7 +0,0 @@
> -PR .= ".2"
> -
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> -
> -SRC_URI += "file://at-3.1.13-selinux.patch"
> -
> -inherit with-selinux
> diff --git a/recipes-extended/at/at_3.1.14.bbappend b/recipes-extended/at/at_3.1.14.bbappend
> new file mode 100644
> index 0000000..a7ecbc2
> --- /dev/null
> +++ b/recipes-extended/at/at_3.1.14.bbappend
> @@ -0,0 +1,7 @@
> +PR .= ".2"
> +
> +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> +
> +SRC_URI += "file://at-3.1.14-selinux.patch"
> +
> +inherit with-selinux
> diff --git a/recipes-extended/sudo/sudo_1.8.7.bbappend b/recipes-extended/sudo/sudo_1.8.7.bbappend
> deleted file mode 100644
> index 5ad8973..0000000
> --- a/recipes-extended/sudo/sudo_1.8.7.bbappend
> +++ /dev/null
> @@ -1,3 +0,0 @@
> -PR .= ".2"
> -
> -inherit with-selinux
> diff --git a/recipes-extended/sudo/sudo_1.8.8.bbappend b/recipes-extended/sudo/sudo_1.8.8.bbappend
> new file mode 100644
> index 0000000..5ad8973
> --- /dev/null
> +++ b/recipes-extended/sudo/sudo_1.8.8.bbappend
> @@ -0,0 +1,3 @@
> +PR .= ".2"
> +
> +inherit with-selinux
> diff --git a/recipes-extended/tar/tar_1.26.bbappend b/recipes-extended/tar/tar_1.26.bbappend
> deleted file mode 100644
> index 2aad7a5..0000000
> --- a/recipes-extended/tar/tar_1.26.bbappend
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -PR .= ".3"
> -
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> -
> -SRC_URI += "file://tar-1.24-xattrs.patch"
> -
> -inherit enable-selinux
> -
> -
> -PACKAGECONFIG += "${@base_contains('DISTRO_FEATURES', 'acl', 'acl', '', d)}"
> -
> -# configure has no acl enable/disable options!
> -#
> -PACKAGECONFIG[acl] = ",,acl,"
> -
> diff --git a/recipes-extended/tar/tar_1.27.bbappend b/recipes-extended/tar/tar_1.27.bbappend
> new file mode 100644
> index 0000000..2aad7a5
> --- /dev/null
> +++ b/recipes-extended/tar/tar_1.27.bbappend
> @@ -0,0 +1,15 @@
> +PR .= ".3"
> +
> +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> +
> +SRC_URI += "file://tar-1.24-xattrs.patch"
> +
> +inherit enable-selinux
> +
> +
> +PACKAGECONFIG += "${@base_contains('DISTRO_FEATURES', 'acl', 'acl', '', d)}"
> +
> +# configure has no acl enable/disable options!
> +#
> +PACKAGECONFIG[acl] = ",,acl,"
> +
> diff --git a/recipes-graphics/mesa/mesa_9.1.6.bbappend b/recipes-graphics/mesa/mesa_9.1.6.bbappend
> deleted file mode 100644
> index 8c11cac..0000000
> --- a/recipes-graphics/mesa/mesa_9.1.6.bbappend
> +++ /dev/null
> @@ -1 +0,0 @@
> -inherit enable-selinux
> diff --git a/recipes-graphics/mesa/mesa_9.2.2.bbappend b/recipes-graphics/mesa/mesa_9.2.2.bbappend
> new file mode 100644
> index 0000000..8c11cac
> --- /dev/null
> +++ b/recipes-graphics/mesa/mesa_9.2.2.bbappend
> @@ -0,0 +1 @@
> +inherit enable-selinux
> diff --git a/recipes-support/gnupg/gnupg_2.0.21.bbappend b/recipes-support/gnupg/gnupg_2.0.21.bbappend
> deleted file mode 100644
> index dddd945..0000000
> --- a/recipes-support/gnupg/gnupg_2.0.21.bbappend
> +++ /dev/null
> @@ -1,5 +0,0 @@
> -PR .= ".1"
> -
> -inherit enable-selinux
> -# gnupg will not build with libselinux, so remove the depend
> -PACKAGECONFIG[selinux] = "--enable-selinux-support,--disable-selinux-support,,"
> diff --git a/recipes-support/gnupg/gnupg_2.0.22.bbappend b/recipes-support/gnupg/gnupg_2.0.22.bbappend
> new file mode 100644
> index 0000000..dddd945
> --- /dev/null
> +++ b/recipes-support/gnupg/gnupg_2.0.22.bbappend
> @@ -0,0 +1,5 @@
> +PR .= ".1"
> +
> +inherit enable-selinux
> +# gnupg will not build with libselinux, so remove the depend
> +PACKAGECONFIG[selinux] = "--enable-selinux-support,--disable-selinux-support,,"
>
prev parent reply other threads:[~2013-11-15 16:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-15 3:53 [meta-selinux][PATCH] Bump versions to catch up with master in oe-core Philip Tricca
2013-11-15 16:06 ` Philip Tricca [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5286468E.1090209@twobit.us \
--to=flihp@twobit.us \
--cc=yocto@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.