From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Sun, 17 Nov 2013 16:50:25 +0000 Subject: Re: [lm-sensors] Asus Sabertooth AM3+ Rev 2.0 (PCIe 2.0) Message-Id: <5288F3D1.9000305@roeck-us.net> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On 11/17/2013 03:02 AM, Commander wrote: > Seems like i get some wrong readings. > output of sensors : http://codepad.org/KicD4Woq > > fam15h_power-pci-00c4: > 6.75W > Looks ok for the current condition (cpu idle). No idea what is going on if it never changes. Maybe Andreas can help. > temp3: > -128c > > These are constant values no matter what, are these readings hardcoded or > is there something wrong? temp3 is not connected; -128c readings are typical for such cases. > > Other than no labels the rest seems to be reported correctly (Other than labels would require configuration in /etc/sensors3.conf. Guenter > low cpu temp in idle, but that's related to the chip from my investigation) > > Best Regards > Artur O. > Justice @ Freenode > _______________________________________________ > lm-sensors mailing list > lm-sensors@lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors > > _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors