From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dan Murphy Subject: Re: [PATCH 1/2] ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx Date: Thu, 21 Nov 2013 11:27:49 -0600 Message-ID: <528E4295.2040109@ti.com> References: <1385041804-19115-1-git-send-email-balajitk@ti.com> <1385041804-19115-2-git-send-email-balajitk@ti.com> <20131121165823.GM10317@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from arroyo.ext.ti.com ([192.94.94.40]:36853 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753211Ab3KUR2O (ORCPT ); Thu, 21 Nov 2013 12:28:14 -0500 In-Reply-To: <20131121165823.GM10317@atomide.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Tony Lindgren , Balaji T K Cc: bcousson@baylibre.com, devicetree@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org On 11/21/2013 10:58 AM, Tony Lindgren wrote: > * Balaji T K [131121 05:51]: >> pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core >> and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core. >> >> Fix the following error message: >> pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38) >> pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x Why is the led pins moved then? >> SDIO card is not detected after moving pin mux to omap4_pmx_core since >> sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card. > Cool, does this fix the issue with the WLAN not coming up after a warm reset > on panda? > > Regards, > > Tony > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- ------------------ Dan Murphy From mboxrd@z Thu Jan 1 00:00:00 1970 From: dmurphy@ti.com (Dan Murphy) Date: Thu, 21 Nov 2013 11:27:49 -0600 Subject: [PATCH 1/2] ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx In-Reply-To: <20131121165823.GM10317@atomide.com> References: <1385041804-19115-1-git-send-email-balajitk@ti.com> <1385041804-19115-2-git-send-email-balajitk@ti.com> <20131121165823.GM10317@atomide.com> Message-ID: <528E4295.2040109@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 11/21/2013 10:58 AM, Tony Lindgren wrote: > * Balaji T K [131121 05:51]: >> pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core >> and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core. >> >> Fix the following error message: >> pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38) >> pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x Why is the led pins moved then? >> SDIO card is not detected after moving pin mux to omap4_pmx_core since >> sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card. > Cool, does this fix the issue with the WLAN not coming up after a warm reset > on panda? > > Regards, > > Tony > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- ------------------ Dan Murphy