From mboxrd@z Thu Jan 1 00:00:00 1970 From: art1 Subject: PROBLEM: restart instead of shutdown on 3.12.1, B85 Haswell Date: Sat, 23 Nov 2013 13:28:31 +0100 Message-ID: <52909F6F.40401@vhex.net> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from vhex.net ([146.185.136.158]:34507 "EHLO vhex.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755539Ab3KWMhb (ORCPT ); Sat, 23 Nov 2013 07:37:31 -0500 Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: lenb@kernel.org, rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Hi, restarting and shutting down works correctly on 3.11.8, but on 3.12.1 when I execute "sudo poweroff" the system restarts instead of shutting down. I didn't find any error messages. Hardware is ASRock B85 Pro4 motherboard with i5-4670 Haswell and integrated graphics, software is Ubuntu 12.04. System data: $ sh scripts/ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux as 3.12.1-a1 #1 SMP PREEMPT Wed Nov 20 23:24:08 CET 2013 x86_64 x86_64 x86_64 GNU/Linux Gnu C 4.6 Gnu make 3.81 binutils 2.22 util-linux 2.20.1 mount support module-init-tools 3.16 e2fsprogs 1.42 xfsprogs 3.1.7 pcmciautils 018 PPP 2.4.5 Linux C Library 2.15 Dynamic linker (ldd) 2.15 Procps 3.2.8 Net-tools 1.60 Kbd 1.15.2 Sh-utils 8.13 wireless-tools 30 Modules Loaded usb_storage snd_hrtimer pci_stub vboxpci vboxnetadp vboxnetflt fuse vboxdrv ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc dm_crypt dm_mod snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi joydev snd_rawmidi snd_seq_midi_event snd_seq psmouse bnep snd_timer serio_raw snd_seq_device rfcomm lpc_ich ehci_pci bluetooth ehci_hcd snd soundcore snd_page_alloc mei_me mei rfkill evdev processor w83627ehf hwmon_vid lm75 coretemp lp parport ext4 jbd2 mbcache crc16 sd_mod hid_generic usbhid hid crc32_pclmul crc32c_intel ghash_clmulni_intel ahci libahci aesni_intel i915 drm_kms_helper drm intel_agp i2c_algo_bit intel_gtt libata ablk_helper cryptd lrw gf128mul glue_helper i2c_core video e1000e aes_x86_64 scsi_mod xhci_hcd ptp pps_core usbcore usb_common button $ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.12.1-a1 (root@as) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Wed Nov 20 23:24:08 CET 2013 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12.1-a1 root=UUID=3f8f69f8-5a66-49e1-8dd0-081d62f95a0d ro crashkernel=384M-2G:64M,2G-:128M [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b967afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b967b000-0x00000000b9681fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b9682000-0x00000000b9f56fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9f57000-0x00000000ba1f4fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ba1f5000-0x00000000cc20cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cc20d000-0x00000000cc412fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cc413000-0x00000000cc44efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cc44f000-0x00000000cc4f6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cc4f7000-0x00000000ccffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ccfff000-0x00000000ccffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./B85 Pro4, BIOS P1.80 09/10/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back [ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back [ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 3 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 4 base 00CF800000 mask 7FFF800000 uncachable [ 0.000000] 5 base 041F000000 mask 7FFF000000 uncachable [ 0.000000] 6 base 041E800000 mask 7FFF800000 uncachable [ 0.000000] 7 base 041E600000 mask 7FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcd000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped at [ffff8800000fd7b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE [ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41e400000-0x41e5fffff] [ 0.000000] [mem 0x41e400000-0x41e5fffff] page 2M [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41e3fffff] [ 0.000000] [mem 0x41c000000-0x41e3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff] [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xb967afff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xb95fffff] page 2M [ 0.000000] [mem 0xb9600000-0xb967afff] page 4k [ 0.000000] init_memory_mapping: [mem 0xb9682000-0xb9f56fff] [ 0.000000] [mem 0xb9682000-0xb97fffff] page 4k [ 0.000000] [mem 0xb9800000-0xb9dfffff] page 2M [ 0.000000] [mem 0xb9e00000-0xb9f56fff] page 4k [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xba1f5000-0xcc20cfff] [ 0.000000] [mem 0xba1f5000-0xba1fffff] page 4k [ 0.000000] [mem 0xba200000-0xcc1fffff] page 2M [ 0.000000] [mem 0xcc200000-0xcc20cfff] page 4k [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xcc413000-0xcc44efff] [ 0.000000] [mem 0xcc413000-0xcc44efff] page 4k [ 0.000000] init_memory_mapping: [mem 0xccfff000-0xccffffff] [ 0.000000] [mem 0xccfff000-0xccffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x35188000-0x368bbfff] [ 0.000000] Reserving 128MB of memory at 720MB for crashkernel (System RAM: 16037MB) [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000cc4d3088 00094 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000cc4dd7f8 0010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000cc4d31b8 0A639 (v02 ALASKA A M I 00000180 INTL 20091112) [ 0.000000] ACPI: FACS 00000000cc4f5080 00040 [ 0.000000] ACPI: APIC 00000000cc4dd908 00072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 00000000cc4dd980 00044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 00000000cc4dd9c8 00539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 00000000cc4ddf08 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 00000000cc4de9e0 001C7 (v01 PmRef LakeTiny 00003000 INTL 20051117) [ 0.000000] ACPI: MCFG 00000000cc4deba8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cc4debe8 00038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 00000000cc4dec20 0036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 00000000cc4def90 03294 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.000000] ACPI: AAFT 00000000cc4e2228 002BB (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: ASF! 00000000cc4e24e8 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: DMAR 00000000cc4e2590 000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: SSDT 00000000cc4e2648 00803 (v01 Intel_ IsctTabl 00001000 INTL 20091112) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41e5fffff] [ 0.000000] NODE_DATA [mem 0x41e5f5000-0x41e5f9fff] [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040e000000-ffff88041dbfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x41e5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xb967afff] [ 0.000000] node 0: [mem 0xb9682000-0xb9f56fff] [ 0.000000] node 0: [mem 0xba1f5000-0xcc20cfff] [ 0.000000] node 0: [mem 0xcc413000-0xcc44efff] [ 0.000000] node 0: [mem 0xccfff000-0xccffffff] [ 0.000000] node 0: [mem 0x100000000-0x41e5fffff] [ 0.000000] On node 0 totalpages: 4105537 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12991 pages used for memmap [ 0.000000] DMA32 zone: 831397 pages, LIFO batch:31 [ 0.000000] Normal zone: 51096 pages used for memmap [ 0.000000] Normal zone: 3270144 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb967b000-0xb9681fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb9f57000-0xba1f4fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcc20d000-0xcc412fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcc44f000-0xcc4f6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcc4f7000-0xccffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88041e200000 s86144 r8192 d24448 u524288 [ 0.000000] pcpu-alloc: s86144 r8192 d24448 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4041365 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.1-artur1 root=UUID=3f8f69f8-5a66-49e1-8dd0-081d62f95a0d ro crashkernel=384M-2G:64M,2G-:128M [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 15930888K/16422148K available (5188K kernel code, 797K rwdata, 1696K rodata, 1144K init, 1288K bss, 491260K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 66060288 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.003333] tsc: Detected 3398.872 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.98 BogoMIPS (lpj=11329573) [ 0.000117] pid_max: default: 32768 minimum: 301 [ 0.000188] Security Framework initialized [ 0.000247] AppArmor: AppArmor disabled by boot time parameter [ 0.000304] Yama: becoming mindful. [ 0.001015] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.003226] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004214] Mount-cache hash table entries: 256 [ 0.004386] Initializing cgroup subsys memory [ 0.004448] Initializing cgroup subsys devices [ 0.004503] Initializing cgroup subsys freezer [ 0.004558] Initializing cgroup subsys net_cls [ 0.004613] Initializing cgroup subsys blkio [ 0.004682] CPU: Physical Processor ID: 0 [ 0.004735] CPU: Processor Core ID: 0 [ 0.004790] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.004790] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.005618] mce: CPU supports 9 MCE banks [ 0.005682] CPU0: Thermal monitoring enabled (TM1) [ 0.005746] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.005746] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0 [ 0.005746] tlb_flushall_shift: 6 [ 0.005931] Freeing SMP alternatives memory: 20K (ffffffff819e7000 - ffffffff819ec000) [ 0.006550] ACPI: Core revision 20130725 [ 0.011621] ACPI: All ACPI Tables successfully acquired [ 0.013083] ftrace: allocating 20131 entries in 79 pages [ 0.018982] dmar: Host address width 39 [ 0.020454] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.020515] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.020589] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.020649] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.020722] dmar: RMRR base: 0x000000cc39a000 end: 0x000000cc3a6fff [ 0.020778] dmar: RMRR base: 0x000000cf800000 end: 0x000000df9fffff [ 0.020899] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.020956] HPET id 0 under DRHD base 0xfed91000 [ 0.021117] Enabled IRQ remapping in x2apic mode [ 0.021172] Enabling x2apic [ 0.021224] Enabled x2apic [ 0.021279] Switched APIC routing to cluster x2apic. [ 0.021717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.054748] smpboot: CPU0: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz (fam: 06, model: 3c, stepping: 03) [ 0.054934] TSC deadline timer enabled [ 0.054939] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.055195] ... version: 3 [ 0.055248] ... bit width: 48 [ 0.055303] ... generic registers: 8 [ 0.055358] ... value mask: 0000ffffffffffff [ 0.055414] ... max period: 0000ffffffffffff [ 0.055471] ... fixed-purpose events: 3 [ 0.055524] ... event mask: 00000007000000ff [ 0.095607] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.081679] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK [ 0.136697] Brought up 4 CPUs [ 0.136752] smpboot: Total of 4 processors activated (27201.93 BogoMIPS) [ 0.139366] devtmpfs: initialized [ 0.142095] PM: Registering ACPI NVS region [mem 0xb967b000-0xb9681fff] (28672 bytes) [ 0.142168] PM: Registering ACPI NVS region [mem 0xcc44f000-0xcc4f6fff] (688128 bytes) [ 0.142706] RTC time: 11:58:25, date: 11/23/13 [ 0.142784] NET: Registered protocol family 16 [ 0.142896] cpuidle: using governor ladder [ 0.142951] cpuidle: using governor menu [ 0.143012] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.143084] ACPI: bus type PCI registered [ 0.143138] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.143229] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.143306] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.147610] PCI: Using configuration type 1 for base access [ 0.148090] bio: create slab at 0 [ 0.148204] ACPI: Added _OSI(Module Device) [ 0.148256] ACPI: Added _OSI(Processor Device) [ 0.148313] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.148369] ACPI: Added _OSI(Processor Aggregator Device) [ 0.149528] ACPI: EC: Look up EC in DSDT [ 0.150732] ACPI: Executed 1 blocks of module-level executable AML code [ 0.152317] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.160100] ACPI: SSDT 00000000cc408c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.160521] ACPI: Dynamic OEM Table Load: [ 0.160646] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.172725] ACPI: SSDT 00000000cc408618 005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.173195] ACPI: Dynamic OEM Table Load: [ 0.173319] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.186154] ACPI: SSDT 00000000cc407d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.186577] ACPI: Dynamic OEM Table Load: [ 0.186704] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.197048] ACPI: Interpreter enabled [ 0.197105] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571) [ 0.197253] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.197408] ACPI: (supports S0 S3 S4 S5) [ 0.197461] ACPI: Using IOAPIC for interrupt routing [ 0.197552] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.197731] ACPI: No dock devices found. [ 0.203244] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.203434] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.203616] acpi PNP0A08:00: ACPI _OSC control (0x18) granted [ 0.203946] ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5) [ 0.204068] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5) [ 0.204123] ACPI: \_SB_.PCI0.DOCK: can't evaluate _ADR (0x5) [ 0.204195] PCI host bridge to bus 0000:00 [ 0.204250] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.204307] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.204365] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.204423] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.204482] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.204542] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.204602] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.204662] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.204721] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.204780] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.204839] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.204903] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.204961] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.204969] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.204973] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.204976] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.205046] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.205061] pci 0000:00:14.0: reg 0x10: [mem 0xf0420000-0xf042ffff 64bit] [ 0.205112] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.205144] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.205223] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.205239] pci 0000:00:16.0: reg 0x10: [mem 0xf043c000-0xf043c00f 64bit] [ 0.205293] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.205349] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000 [ 0.205363] pci 0000:00:19.0: reg 0x10: [mem 0xf0400000-0xf041ffff] [ 0.205369] pci 0000:00:19.0: reg 0x14: [mem 0xf0439000-0xf0439fff] [ 0.205376] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.205426] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.205456] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.205537] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.205555] pci 0000:00:1a.0: reg 0x10: [mem 0xf0438000-0xf04383ff] [ 0.205632] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.205672] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.205753] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.205765] pci 0000:00:1b.0: reg 0x10: [mem 0xf0430000-0xf0433fff 64bit] [ 0.205819] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.205851] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.205929] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.205983] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.206016] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.206092] pci 0000:00:1c.2: [8086:244e] type 01 class 0x060401 [ 0.206146] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.206178] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.206262] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.206279] pci 0000:00:1d.0: reg 0x10: [mem 0xf0437000-0xf04373ff] [ 0.206356] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.206394] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.206472] pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100 [ 0.206606] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.206619] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.206625] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.206630] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.206636] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.206642] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.206648] pci 0000:00:1f.2: reg 0x24: [mem 0xf0436000-0xf04367ff] [ 0.206681] pci 0000:00:1f.2: PME# supported from D3hot [ 0.206725] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.206737] pci 0000:00:1f.3: reg 0x10: [mem 0xf0435000-0xf04350ff 64bit] [ 0.206753] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.206843] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.206958] pci 0000:02:00.0: [1b21:1080] type 01 class 0x060401 [ 0.207050] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.207123] pci 0000:00:1c.2: PCI bridge to [bus 02-03] (subtractive decode) [ 0.207189] pci 0000:00:1c.2: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.207190] pci 0000:00:1c.2: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.207191] pci 0000:00:1c.2: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.207192] pci 0000:00:1c.2: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.207193] pci 0000:00:1c.2: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.207194] pci 0000:00:1c.2: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.207195] pci 0000:00:1c.2: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.207196] pci 0000:00:1c.2: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.207197] pci 0000:00:1c.2: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.207198] pci 0000:00:1c.2: bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode) [ 0.207307] pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode) [ 0.207381] pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.207382] pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.207383] pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.207384] pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.207384] pci 0000:02:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.207385] pci 0000:02:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.207386] pci 0000:02:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.207387] pci 0000:02:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.207388] pci 0000:02:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.207389] pci 0000:02:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.207390] pci 0000:02:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.207391] pci 0000:02:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.207392] pci 0000:02:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.207393] pci 0000:02:00.0: bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode) [ 0.207409] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.207985] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.208462] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.209020] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.209497] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.209970] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.210449] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.211010] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.211486] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.212170] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.212298] ACPI: \_SB_.PCI0: notify handler is installed [ 0.212336] Found 1 acpi root devices [ 0.212379] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.212452] vgaarb: loaded [ 0.212504] vgaarb: bridge control possible 0000:00:02.0 [ 0.212579] PCI: Using ACPI for IRQ routing [ 0.213851] PCI: pci_cache_line_size set to 64 bytes [ 0.213886] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.213888] e820: reserve RAM buffer [mem 0xb967b000-0xbbffffff] [ 0.213889] e820: reserve RAM buffer [mem 0xb9f57000-0xbbffffff] [ 0.213889] e820: reserve RAM buffer [mem 0xcc20d000-0xcfffffff] [ 0.213891] e820: reserve RAM buffer [mem 0xcc44f000-0xcfffffff] [ 0.213891] e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff] [ 0.213892] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff] [ 0.213940] NetLabel: Initializing [ 0.213993] NetLabel: domain hash size = 128 [ 0.214048] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.214111] NetLabel: unlabeled traffic allowed by default [ 0.214178] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.214556] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.216624] Switched to clocksource hpet [ 0.219132] pnp: PnP ACPI init [ 0.219191] ACPI: bus type PNP registered [ 0.219286] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.219346] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.219353] pnp 00:01: [dma 4] [ 0.219361] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.219372] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.219425] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.219489] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.219548] system 00:04: [io 0xffff] has been reserved [ 0.219604] system 00:04: [io 0xffff] has been reserved [ 0.219661] system 00:04: [io 0xffff] has been reserved [ 0.219718] system 00:04: [io 0x1c00-0x1cfe] has been reserved [ 0.219776] system 00:04: [io 0x1d00-0x1dfe] has been reserved [ 0.219833] system 00:04: [io 0x1e00-0x1efe] has been reserved [ 0.219891] system 00:04: [io 0x1f00-0x1ffe] has been reserved [ 0.219949] system 00:04: [io 0x1800-0x18fe] could not be reserved [ 0.220012] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.220069] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220088] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.220114] system 00:06: [io 0x1854-0x1857] has been reserved [ 0.220172] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.220214] system 00:07: [io 0x0290-0x029f] has been reserved [ 0.220272] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220389] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.220446] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220461] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.220551] pnp 00:0a: [dma 0 disabled] [ 0.220576] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.220822] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.220881] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.220939] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.220998] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.221057] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.221116] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.221175] system 00:0b: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.221234] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.221293] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved [ 0.221351] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.221411] system 00:0b: [mem 0xf7fef000-0xf7feffff] has been reserved [ 0.221471] system 00:0b: [mem 0xf7ff0000-0xf7ff0fff] has been reserved [ 0.221530] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.221678] pnp: PnP ACPI: found 12 devices [ 0.221730] ACPI: bus type PNP unregistered [ 0.227455] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.227458] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 0.227459] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 0.227475] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.227477] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.227478] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.227480] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfa00000-0xdfbfffff] [ 0.227541] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref] [ 0.227613] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.227672] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.227729] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.227789] pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfbfffff] [ 0.227849] pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfdfffff 64bit pref] [ 0.227925] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.227996] pci 0000:00:1c.2: PCI bridge to [bus 02-03] [ 0.228060] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.228061] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.228062] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.228063] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.228064] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.228065] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.228066] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.228067] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.228067] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.228068] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff] [ 0.228070] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.228070] pci_bus 0000:01: resource 1 [mem 0xdfa00000-0xdfbfffff] [ 0.228071] pci_bus 0000:01: resource 2 [mem 0xdfc00000-0xdfdfffff 64bit pref] [ 0.228072] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.228073] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.228074] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.228075] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.228076] pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.228077] pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.228078] pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff] [ 0.228079] pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.228080] pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.228081] pci_bus 0000:02: resource 13 [mem 0xdfa00000-0xfeafffff] [ 0.228082] pci_bus 0000:03: resource 8 [io 0x0000-0x0cf7] [ 0.228083] pci_bus 0000:03: resource 9 [io 0x0d00-0xffff] [ 0.228084] pci_bus 0000:03: resource 10 [mem 0x000a0000-0x000bffff] [ 0.228085] pci_bus 0000:03: resource 11 [mem 0x000d0000-0x000d3fff] [ 0.228085] pci_bus 0000:03: resource 12 [mem 0x000d4000-0x000d7fff] [ 0.228086] pci_bus 0000:03: resource 13 [mem 0x000d8000-0x000dbfff] [ 0.228087] pci_bus 0000:03: resource 14 [mem 0x000dc000-0x000dffff] [ 0.228088] pci_bus 0000:03: resource 15 [mem 0x000e0000-0x000e3fff] [ 0.228089] pci_bus 0000:03: resource 16 [mem 0x000e4000-0x000e7fff] [ 0.228090] pci_bus 0000:03: resource 17 [mem 0xdfa00000-0xfeafffff] [ 0.228107] NET: Registered protocol family 2 [ 0.228312] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.228628] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.228791] TCP: Hash tables configured (established 131072 bind 65536) [ 0.230281] TCP: reno registered [ 0.230345] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.230441] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.230557] NET: Registered protocol family 1 [ 0.230618] pci 0000:00:02.0: Boot video device [ 0.263315] PCI: CLS 64 bytes, default 64 [ 0.263338] Unpacking initramfs... [ 0.523289] Freeing initrd memory: 23760K (ffff880035188000 - ffff8800368bc000) [ 0.523369] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.523429] software IO TLB [mem 0xc820d000-0xcc20d000] (64MB) mapped at [ffff8800c820d000-ffff8800cc20cfff] [ 0.523609] Scanning for low memory corruption every 60 seconds [ 0.523814] audit: initializing netlink socket (disabled) [ 0.523878] type=2000 audit(1385207905.519:1): initialized [ 0.531757] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.532758] zbud: loaded [ 0.532890] VFS: Disk quotas dquot_6.5.2 [ 0.532969] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.533133] msgmni has been set to 31161 [ 0.533390] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.533487] io scheduler noop registered [ 0.533543] io scheduler deadline registered [ 0.533612] io scheduler cfq registered (default) [ 0.533802] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.533866] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.533951] intel_idle: MWAIT substates: 0x42120 [ 0.533952] intel_idle: v0.4 model 0x3C [ 0.533953] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.534033] GHES: HEST is not enabled! [ 0.534116] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.554681] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.555028] Linux agpgart interface v0.103 [ 0.555120] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.557614] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.557684] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.557796] mousedev: PS/2 mouse device common for all mice [ 0.557883] rtc_cmos 00:05: RTC can wake from S4 [ 0.558047] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.558127] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.558262] drop_monitor: Initializing network drop monitor service [ 0.558363] TCP: cubic registered [ 0.558465] NET: Registered protocol family 10 [ 0.558613] NET: Registered protocol family 17 [ 0.558673] Key type dns_resolver registered [ 0.558902] registered taskstats version 1 [ 0.559557] Magic number: 5:368:985 [ 0.559696] rtc_cmos 00:05: setting system clock to 2013-11-23 11:58:25 UTC (1385207905) [ 0.559798] PM: Hibernation image not present or could not be loaded. [ 0.560452] Freeing unused kernel memory: 1144K (ffffffff818c9000 - ffffffff819e7000) [ 0.560524] Write protecting the kernel read-only data: 8192k [ 0.561960] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000) [ 0.562547] Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000) [ 0.572218] udevd[74]: starting version 175 [ 0.583593] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 0.583673] ACPI: Power Button [PWRB] [ 0.585483] pps_core: LinuxPPS API ver. 1 registered [ 0.585543] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.585735] ACPI: bus type USB registered [ 0.585806] usbcore: registered new interface driver usbfs [ 0.585869] usbcore: registered new interface driver hub [ 0.586268] usbcore: registered new device driver usb [ 0.586723] PTP clock support registered [ 0.587491] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 0.587494] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.587556] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.587709] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.587726] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X [ 0.588451] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 0.588511] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 0.589244] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.589324] ACPI: Power Button [PWRF] [ 0.591317] SCSI subsystem initialized [ 0.593877] [drm] Initialized drm 1.1.0 20060810 [ 0.596464] libata version 3.00 loaded. [ 0.596710] hub 1-0:1.0: USB hub found [ 0.596785] hub 1-0:1.0: 12 ports detected [ 0.598766] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.598829] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.599169] hub 2-0:1.0: USB hub found [ 0.599291] hub 2-0:1.0: 6 ports detected [ 0.609822] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.609874] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.609999] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 0.777324] e1000e 0000:00:19.0 eth0: registered PHC clock [ 0.777388] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) bc:5f:f4:d0:b0:1f [ 0.777461] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.777545] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 0.778263] [drm] Memory usable by graphics device = 2048M [ 0.778323] i915 0000:00:02.0: setting latency timer to 64 [ 0.797972] i915 0000:00:02.0: irq 44 for MSI/MSI-X [ 0.797978] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.798037] [drm] Driver supports precise vblank timestamp query. [ 0.798134] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.956008] usb 1-11: new full-speed USB device number 2 using xhci_hcd [ 0.980909] hidraw: raw HID events driver (C) Jiri Kosina [ 0.990500] usbcore: registered new interface driver usbhid [ 0.990566] usbhid: USB HID core driver [ 0.991583] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X6 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input4 [ 0.991729] hid-generic 0003:045E:074B.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X6 Keyboard] on usb-0000:00:14.0-11/input0 [ 0.993655] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X6 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/input/input5 [ 0.993764] hid-generic 0003:045E:074B.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X6 Keyboard] on usb-0000:00:14.0-11/input1 [ 1.139171] usb 1-12: new low-speed USB device number 3 using xhci_hcd [ 1.157078] usb 1-12: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.159287] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input6 [ 1.159527] hid-generic 0003:045E:0047.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:14.0-12/input0 [ 1.185924] fbcon: inteldrmfb (fb0) is primary device [ 1.487550] Console: switching to colour frame buffer device 180x56 [ 1.489561] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.489576] i915 0000:00:02.0: registered panic notifier [ 1.516536] acpi device:57: registered as cooling_device0 [ 1.516570] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.516608] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 1.516639] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.516672] ahci 0000:00:1f.2: version 3.0 [ 1.516752] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.516841] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode [ 1.516863] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 1.516883] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.517537] scsi0 : ahci [ 1.517595] scsi1 : ahci [ 1.517782] scsi2 : ahci [ 1.517878] scsi3 : ahci [ 1.517950] scsi4 : ahci [ 1.518013] scsi5 : ahci [ 1.518073] ata1: SATA max UDMA/133 abar m2048@0xf0436000 port 0xf0436100 irq 45 [ 1.518091] ata2: DUMMY [ 1.518098] ata3: DUMMY [ 1.518105] ata4: DUMMY [ 1.518112] ata5: DUMMY [ 1.518119] ata6: DUMMY [ 1.525488] tsc: Refined TSC clocksource calibration: 3399.013 MHz [ 1.835253] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.835614] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.835616] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0AB0Q, max UDMA/133 [ 1.835633] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.835943] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.835945] ata1.00: configured for UDMA/133 [ 1.836068] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5 [ 1.838804] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.838913] sd 0:0:0:0: [sda] Write Protect is off [ 1.838926] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.838948] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.839312] sda: sda1 sda2 sda3 [ 1.839558] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.351542] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 2.524708] Switched to clocksource tsc [ 6.868792] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 7.242032] EXT4-fs (sda1): re-mounted. Opts: discard,barrier=0,errors=remount-ro,commit=120 [ 7.294910] EXT4-fs (sda3): barriers disabled [ 7.298052] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: discard,barrier=0,commit=120,journal_async_commit [ 8.241337] udevd[665]: starting version 175 [ 8.305636] lp: driver loaded but no devices found [ 8.341966] w83627ehf: Found NCT6776F chip at 0x290 [ 8.385798] mei_me 0000:00:16.0: setting latency timer to 64 [ 8.385842] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X [ 8.393876] Bluetooth: Core ver 2.16 [ 8.393890] NET: Registered protocol family 31 [ 8.393891] Bluetooth: HCI device and connection manager initialized [ 8.393896] Bluetooth: HCI socket layer initialized [ 8.393898] Bluetooth: L2CAP socket layer initialized [ 8.393900] Bluetooth: SCO socket layer initialized [ 8.394572] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.398364] ehci-pci: EHCI PCI platform driver [ 8.398827] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 8.398834] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 8.398839] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 8.398850] ehci-pci 0000:00:1a.0: debug port 2 [ 8.402918] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 8.402932] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0438000 [ 8.404627] Bluetooth: RFCOMM TTY layer initialized [ 8.404634] Bluetooth: RFCOMM socket layer initialized [ 8.404635] Bluetooth: RFCOMM ver 1.11 [ 8.412639] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.412646] Bluetooth: BNEP socket layer initialized [ 8.412829] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 8.412933] hub 3-0:1.0: USB hub found [ 8.412937] hub 3-0:1.0: 2 ports detected [ 8.413099] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 8.413104] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 8.413107] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 8.413117] ehci-pci 0000:00:1d.0: debug port 2 [ 8.417007] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 8.417021] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0437000 [ 8.426109] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 8.427410] hub 4-0:1.0: USB hub found [ 8.427417] hub 4-0:1.0: 2 ports detected [ 8.427836] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251) [ 8.427840] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.427843] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251) [ 8.427844] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251) [ 8.427846] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.427847] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251) [ 8.427848] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251) [ 8.427850] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.427850] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 8.462328] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 8.484264] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 8.484310] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 8.484343] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 8.484537] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 8.484578] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 8.553751] device-mapper: uevent: version 1.0.3 [ 8.553866] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com [ 8.636041] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 8.719226] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 8.739215] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 8.739299] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 8.846255] hub 3-1:1.0: USB hub found [ 8.846338] hub 3-1:1.0: 6 ports detected [ 8.952363] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 9.076200] hub 4-1:1.0: USB hub found [ 9.076265] hub 4-1:1.0: 6 ports detected [ 10.242783] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 10.242786] e1000e 0000:00:19.0 eth1: 10/100 speed: disabling TSO [ 10.242812] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 12.567896] init: failsafe main process (955) killed by TERM signal [ 12.628495] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory [ 12.716853] Bridge firewalling registered [ 12.753914] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.769993] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 12.778774] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 13.327580] Ebtables v2.0 registered [ 13.333724] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 13.341913] cgroup: libvirtd (1693) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 13.341915] cgroup: "memory" requires setting use_hierarchy to 1 on the root. [ 13.460898] vboxdrv: Found 4 processor cores. [ 13.461215] vboxdrv: fAsync=0 offMin=0x1a2 offMax=0xdfe [ 13.461647] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 13.461648] vboxdrv: Successfully loaded version 4.3.2 (interface 0x001a0005). [ 13.589864] fuse init (API version 7.22) [ 13.667534] vboxpci: IOMMU not found (not registered) [ 13.760331] init: plymouth-stop pre-start process (2228) terminated with status 1 [ 14.065888] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. $ lspci -vvv 00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06) Subsystem: ASRock Incorporation Device 0c00 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller]) Subsystem: ASRock Incorporation Device 0412 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee00018 Data: 0000 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) (prog-if 30 [XHCI]) Subsystem: ASRock Incorporation Device 8c31 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 0.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: ASRock Incorporation Device 8c10 Capabilities: [a0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us ClockPM- Surprise- LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #2, PowerLimit 10.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABC, TimeoutDis+ ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: ASRock Incorporation Device 244e Capabilities: [a0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) (prog-if 20 [EHCI]) Subsystem: ASRock Incorporation Device 8c26 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: ASRock Incorporation Device 8c02 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [c0] Subsystem: ASRock Incorporation Device 1080