Re: [lm-sensors] [PATCH 1/5] tg3: Convert to use hwmon_device_register_with_groups

[Guenter Roeck <linux@roeck-us.net>]

On 11/25/2013 05:52 PM, Nithin Nayak Sujir wrote:
>
>
> On 11/22/2013 10:07 PM, Guenter Roeck wrote:
>> Use new hwmon API to simplify code, provide missing mandatory 'name'
>> sysfs attribute, and attach hwmon attributes to hwmon device instead
>> of pci device.
>>
>> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
>> ---
>>   drivers/net/ethernet/broadcom/tg3.c |   25 ++++++-------------------
>>   1 file changed, 6 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
>> index a9e0684..369b736 100644
>> --- a/drivers/net/ethernet/broadcom/tg3.c
>> +++ b/drivers/net/ethernet/broadcom/tg3.c
>> @@ -10629,10 +10629,8 @@ static void tg3_sd_scan_scratchpad(struct tg3 *tp, struct tg3_ocir *ocir)
>>   static ssize_t tg3_show_temp(struct device *dev,
>>                    struct device_attribute *devattr, char *buf)
>>   {
>> -    struct pci_dev *pdev = to_pci_dev(dev);
>> -    struct net_device *netdev = pci_get_drvdata(pdev);
>> -    struct tg3 *tp = netdev_priv(netdev);
>>       struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>> +    struct tg3 *tp = dev_get_drvdata(dev);
>
>
> Shouldn't this be
> struct tg3 *tp = netdev_priv(dev_get_drvdata(dev));
>

'struct tg3 *tp' is attached to the hwmon device in
hwmon_device_register_with_groups(), so it can be retrieved
with dev_get_drvdata() from there. Keep in mind that 'dev'
is no longer the pci device but the hwmon device.

Guenter



_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors