All of lore.kernel.org
 help / color / mirror / Atom feed
From: Minkyu Kang <mk7.kang@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/9 v8] EXYNOS5420: Add SMDK5420 board support
Date: Wed, 27 Nov 2013 11:51:28 +0900	[thread overview]
Message-ID: <52955E30.9040608@samsung.com> (raw)
In-Reply-To: <CAPs=JDfcf2kVxMe4-+gOVCrodR6_Po=Jqsq7T1dnxeY96ibtMQ@mail.gmail.com>

On 26/11/13 13:24, Rajeshwari Birje wrote:
> Hi Minkyu Kang.
> 
> Please do let me know if any comments or can we get this merged?
> 
> On Fri, Nov 15, 2013 at 10:29 AM, Rajeshwari S Shinde
> <rajeshwari.s@samsung.com> wrote:
>> This patch adds basic board support for SMDK5420 board.
>> These patches are tested for booting fine on EVT1 SMDK5420.
>>
>> Changes in V2:
>>         - Corrected a compilation issue for SMDK5420.
>>
>> Changes in V3:
>>         - Add patch to support variable size SPL support
>>         - Add patch to disable SMU for eMMC.
>>
>> Changes in V4:
>>         - Added check for MAX77686 pmic compilation.
>>         - Added correct calculation of gpio based addresses.
>>         - Rebased on the latest u-boot code.
>>         - Removed patches for UART and TZPC changes as
>>         they were not needed.
>>         - Added flag to disable SMU for eMMC.
>>
>> Changes in V5:
>>         - Moved functions board_mmc_init and board_eth_init
>>         to common/board.c in case of device tree support.
>>
>> Changes in V6:
>>         - Rebased on the latest mainline branch.
>>         - Moved the definitions for SMU to arch/arm dwmmc.h
>>
>> Changes in V7:
>>         - Removed below patch as it is already merged
>>         "DWMMC: SMDK5420: Disable SMU for eMMC"
>>         - Corrected the multi line comments and removal of
>>         blank spaces and lines.
>>         - Corrected the license.
>>
>> Changes in V8:
>>         - corrected the if loops with if conditions of
>>         pro_id and cpu_id.
>>
>> Rajeshwari S Shinde (9):
>>   EXYNOS5: Create a common board file
>>   Exynos5420: Add base addresses for 5420
>>   Exynos5420: Add clock initialization for 5420
>>   Exynos5420: Add DDR3 initialization for 5420
>>   Exynos5420: Add support for 5420 in pinmux and gpio
>>   Exynos5420: Add base patch for SMDK5420
>>   DTS: Add dts support for SMDK5420
>>   Config: Add initial config for SMDK5420
>>   SPL: EXYNOS: Prepare for variable size SPL support
>>
>>  arch/arm/cpu/armv7/exynos/clock.c              | 258 ++++++++-
>>  arch/arm/cpu/armv7/exynos/clock_init.h         |  17 +
>>  arch/arm/cpu/armv7/exynos/clock_init_exynos5.c | 352 +++++++++++-
>>  arch/arm/cpu/armv7/exynos/dmc_common.c         |  10 +-
>>  arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c      | 421 +++++++++++++-
>>  arch/arm/cpu/armv7/exynos/exynos5_setup.h      | 738 +++++++++++++++++++------
>>  arch/arm/cpu/armv7/exynos/pinmux.c             | 260 ++++++++-
>>  arch/arm/dts/exynos5.dtsi                      | 198 +++++++
>>  arch/arm/dts/exynos5250.dtsi                   | 196 +------
>>  arch/arm/dts/exynos5420.dtsi                   |  70 +++
>>  arch/arm/include/asm/arch-exynos/board.h       |  17 +
>>  arch/arm/include/asm/arch-exynos/clk.h         |   1 +
>>  arch/arm/include/asm/arch-exynos/clock.h       | 494 +++++++++++++++++
>>  arch/arm/include/asm/arch-exynos/cpu.h         |  51 +-
>>  arch/arm/include/asm/arch-exynos/dmc.h         | 123 +++--
>>  arch/arm/include/asm/arch-exynos/gpio.h        | 143 ++++-
>>  arch/arm/include/asm/arch-exynos/periph.h      |   3 +
>>  board/samsung/common/Makefile                  |   4 +
>>  board/samsung/common/board.c                   | 407 ++++++++++++++
>>  board/samsung/dts/exynos5420-smdk5420.dts      | 169 ++++++
>>  board/samsung/smdk5250/exynos5-dt.c            | 361 +-----------
>>  board/samsung/smdk5250/smdk5250.c              | 182 +-----
>>  board/samsung/smdk5420/Makefile                |  34 ++
>>  board/samsung/smdk5420/smdk5420.c              | 159 ++++++
>>  board/samsung/smdk5420/smdk5420_spl.c          |  52 ++
>>  boards.cfg                                     |   1 +
>>  include/configs/arndale.h                      |   1 +
>>  include/configs/exynos5-dt.h                   | 300 ++++++++++
>>  include/configs/exynos5250-dt.h                | 316 +----------
>>  include/configs/smdk5420.h                     |  56 ++
>>  spl/Makefile                                   |   7 +-
>>  tools/Makefile                                 |   3 +-
>>  tools/mkexynosspl.c                            | 167 ++++--
>>  33 files changed, 4227 insertions(+), 1344 deletions(-)
>>  create mode 100644 arch/arm/dts/exynos5.dtsi
>>  create mode 100644 arch/arm/dts/exynos5420.dtsi
>>  create mode 100644 arch/arm/include/asm/arch-exynos/board.h
>>  create mode 100644 board/samsung/common/board.c
>>  create mode 100644 board/samsung/dts/exynos5420-smdk5420.dts
>>  create mode 100644 board/samsung/smdk5420/Makefile
>>  create mode 100644 board/samsung/smdk5420/smdk5420.c
>>  create mode 100644 board/samsung/smdk5420/smdk5420_spl.c
>>  create mode 100644 include/configs/exynos5-dt.h
>>  create mode 100644 include/configs/smdk5420.h
>>
>> --
>> 1.7.12.4
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 
> 

I already sent comments on your patches.
but, it does not reached at mailing list.
I don't know why.
Anyway sorry, I'll resend comments.

Thanks,
Minkyu Kang.

      reply	other threads:[~2013-11-27  2:51 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-15  4:59 [U-Boot] [PATCH 0/9 v8] EXYNOS5420: Add SMDK5420 board support Rajeshwari S Shinde
2013-11-15  4:59 ` [U-Boot] [PATCH 1/9 v8] EXYNOS5: Create a common board file Rajeshwari S Shinde
2013-11-15  4:59 ` [U-Boot] [PATCH 2/9 v8] Exynos5420: Add base addresses for 5420 Rajeshwari S Shinde
2013-11-15  4:59 ` [U-Boot] [PATCH 3/9 v8] Exynos5420: Add clock initialization " Rajeshwari S Shinde
     [not found]   ` <528DB03B.4060909@samsung.com>
2013-11-27  5:47     ` Minkyu Kang
2013-11-15  4:59 ` [U-Boot] [PATCH 4/9 v8] Exynos5420: Add DDR3 " Rajeshwari S Shinde
     [not found]   ` <528DB294.8000903@samsung.com>
2013-11-27  5:49     ` Minkyu Kang
2013-11-15  4:59 ` [U-Boot] [PATCH 5/9 v8] Exynos5420: Add support for 5420 in pinmux and gpio Rajeshwari S Shinde
2013-11-15  4:59 ` [U-Boot] [PATCH 6/9 v8] Exynos5420: Add base patch for SMDK5420 Rajeshwari S Shinde
     [not found]   ` <528DB51E.7060908@samsung.com>
2013-11-27  5:49     ` Minkyu Kang
2013-11-15  4:59 ` [U-Boot] [PATCH 7/9 v8] DTS: Add dts support " Rajeshwari S Shinde
2013-11-15  4:59 ` [U-Boot] [PATCH 8/9 v8] Config: Add initial config " Rajeshwari S Shinde
     [not found]   ` <528DB710.2000902@samsung.com>
2013-11-27  5:50     ` Minkyu Kang
2013-11-15  4:59 ` [U-Boot] [PATCH 9/9 v8] SPL: EXYNOS: Prepare for variable size SPL support Rajeshwari S Shinde
2013-11-26  4:24 ` [U-Boot] [PATCH 0/9 v8] EXYNOS5420: Add SMDK5420 board support Rajeshwari Birje
2013-11-27  2:51   ` Minkyu Kang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52955E30.9040608@samsung.com \
    --to=mk7.kang@samsung.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.