From: Andrew Cooper <andrew.cooper3@citrix.com>
To: dongxiao.xu@intel.com
Cc: keir@xen.org, Ian.Campbell@citrix.com,
stefano.stabellini@eu.citrix.com, Ian.Jackson@eu.citrix.com,
xen-devel@lists.xen.org, JBeulich@suse.com,
dgdegra@tycho.nsa.gov
Subject: Re: [PATCH v3 1/7] x86: detect and initialize Cache QoS Monitoring feature
Date: Fri, 29 Nov 2013 13:59:15 +0000 [thread overview]
Message-ID: <52989DB3.4030100@citrix.com> (raw)
In-Reply-To: <1385704092-89546-2-git-send-email-dongxiao.xu@intel.com>
On 29/11/13 05:48, dongxiao.xu@intel.com wrote:
> From: Dongxiao Xu <dongxiao.xu@intel.com>
>
> Detect platform QoS feature status and enumerate the resource types,
> one of which is to monitor the L3 cache occupancy.
>
> Also introduce a Xen grub command line parameter to control the
> QoS feature status globally.
>
> Signed-off-by: Jiongxi Li <jiongxi.li@intel.com>
> Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
> ---
> xen/arch/x86/Makefile | 1 +
> xen/arch/x86/cpu/intel.c | 6 +++
> xen/arch/x86/pqos.c | 95 ++++++++++++++++++++++++++++++++++++++
> xen/arch/x86/setup.c | 3 ++
> xen/include/asm-x86/cpufeature.h | 1 +
> xen/include/asm-x86/pqos.h | 32 +++++++++++++
> 6 files changed, 138 insertions(+)
> create mode 100644 xen/arch/x86/pqos.c
> create mode 100644 xen/include/asm-x86/pqos.h
>
> diff --git a/xen/arch/x86/Makefile b/xen/arch/x86/Makefile
> index d502bdf..54962e0 100644
> --- a/xen/arch/x86/Makefile
> +++ b/xen/arch/x86/Makefile
> @@ -58,6 +58,7 @@ obj-y += crash.o
> obj-y += tboot.o
> obj-y += hpet.o
> obj-y += xstate.o
> +obj-y += pqos.o
>
> obj-$(crash_debug) += gdbstub.o
>
> diff --git a/xen/arch/x86/cpu/intel.c b/xen/arch/x86/cpu/intel.c
> index 27fe762..f0d83ea 100644
> --- a/xen/arch/x86/cpu/intel.c
> +++ b/xen/arch/x86/cpu/intel.c
> @@ -230,6 +230,12 @@ static void __devinit init_intel(struct cpuinfo_x86 *c)
> ( c->cpuid_level >= 0x00000006 ) &&
> ( cpuid_eax(0x00000006) & (1u<<2) ) )
> set_bit(X86_FEATURE_ARAT, c->x86_capability);
> +
> + /* Check platform QoS monitoring capability */
> + if ((c->cpuid_level >= 0x00000007) &&
> + (cpuid_ebx(0x00000007) & (1u<<12)))
> + set_bit(X86_FEATURE_QOSM, c->x86_capability);
> +
> }
>
> static struct cpu_dev intel_cpu_dev __cpuinitdata = {
> diff --git a/xen/arch/x86/pqos.c b/xen/arch/x86/pqos.c
> new file mode 100644
> index 0000000..e2172c4
> --- /dev/null
> +++ b/xen/arch/x86/pqos.c
> @@ -0,0 +1,95 @@
> +/*
> + * pqos.c: Platform QoS related service for guest.
> + *
> + * Copyright (c) 2013, Intel Corporation
> + * Author: Jiongxi Li <jiongxi.li@intel.com>
> + * Author: Dongxiao Xu <dongxiao.xu@intel.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
> + * Place - Suite 330, Boston, MA 02111-1307 USA.
> + */
> +#include <asm/processor.h>
> +#include <xen/init.h>
> +#include <asm/pqos.h>
> +
> +static bool_t __initdata pqos_enabled = 1;
> +boolean_param("pqos", pqos_enabled);
> +
> +static unsigned int cqm_rmid_count = 256;
> +integer_param("cqm_rmid_count", cqm_rmid_count);
> +
> +unsigned int cqm_upscaling_factor = 0;
> +bool_t cqm_enabled = 0;
> +domid_t *cqm_rmid_array = NULL;
I feel this would be more meaningful being called "rmid_to_dom" or
something similar. (but do admit that this is entirely personal taste).
~Andrew
> +
> +static void __init init_cqm(void)
> +{
> + unsigned int rmid;
> + unsigned int eax, edx;
> + unsigned int max_cqm_rmid;
> +
> + cpuid_count(0xf, 1, &eax, &cqm_upscaling_factor, &max_cqm_rmid, &edx);
> + if ( !(edx & QOS_MONITOR_EVTID_L3) )
> + return;
> +
> + cqm_rmid_count = min(cqm_rmid_count, max_cqm_rmid + 1);
> +
> + cqm_rmid_array = xzalloc_array(domid_t, cqm_rmid_count);
> + if ( !cqm_rmid_array )
> + {
> + cqm_rmid_count = 0;
> + return;
> + }
> +
> + /* Reserve RMID 0 for all domains not being monitored */
> + cqm_rmid_array[0] = DOMID_XEN;
> +
> + for ( rmid = 1; rmid < cqm_rmid_count; rmid++ )
> + cqm_rmid_array[rmid] = DOMID_INVALID;
> +
> + cqm_enabled = 1;
> +
> + printk(XENLOG_INFO "Cache QoS Monitoring Enabled.\n");
> +}
> +
> +static void __init init_qos_monitor(void)
> +{
> + unsigned int qm_features;
> + unsigned int eax, ebx, ecx;
> +
> + if ( !(boot_cpu_has(X86_FEATURE_QOSM)) )
> + return;
> +
> + cpuid_count(0xf, 0, &eax, &ebx, &ecx, &qm_features);
> +
> + if ( qm_features & QOS_MONITOR_TYPE_L3 )
> + init_cqm();
> +}
> +
> +void __init init_platform_qos(void)
> +{
> + if ( !pqos_enabled )
> + return;
> +
> + init_qos_monitor();
> +}
> +
> +/*
> + * Local variables:
> + * mode: C
> + * c-file-style: "BSD"
> + * c-basic-offset: 4
> + * tab-width: 4
> + * indent-tabs-mode: nil
> + * End:
> + */
> diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
> index 5bf4ee0..95418e4 100644
> --- a/xen/arch/x86/setup.c
> +++ b/xen/arch/x86/setup.c
> @@ -48,6 +48,7 @@
> #include <asm/setup.h>
> #include <xen/cpu.h>
> #include <asm/nmi.h>
> +#include <asm/pqos.h>
>
> /* opt_nosmp: If true, secondary processors are ignored. */
> static bool_t __initdata opt_nosmp;
> @@ -1402,6 +1403,8 @@ void __init __start_xen(unsigned long mbi_p)
>
> domain_unpause_by_systemcontroller(dom0);
>
> + init_platform_qos();
> +
> reset_stack_and_jump(init_done);
> }
>
> diff --git a/xen/include/asm-x86/cpufeature.h b/xen/include/asm-x86/cpufeature.h
> index 1cfaf94..ca59668 100644
> --- a/xen/include/asm-x86/cpufeature.h
> +++ b/xen/include/asm-x86/cpufeature.h
> @@ -147,6 +147,7 @@
> #define X86_FEATURE_ERMS (7*32+ 9) /* Enhanced REP MOVSB/STOSB */
> #define X86_FEATURE_INVPCID (7*32+10) /* Invalidate Process Context ID */
> #define X86_FEATURE_RTM (7*32+11) /* Restricted Transactional Memory */
> +#define X86_FEATURE_QOSM (7*32+12) /* Platform QoS monitoring capability */
> #define X86_FEATURE_NO_FPU_SEL (7*32+13) /* FPU CS/DS stored as zero */
> #define X86_FEATURE_SMAP (7*32+20) /* Supervisor Mode Access Prevention */
>
> diff --git a/xen/include/asm-x86/pqos.h b/xen/include/asm-x86/pqos.h
> new file mode 100644
> index 0000000..e8caca2
> --- /dev/null
> +++ b/xen/include/asm-x86/pqos.h
> @@ -0,0 +1,32 @@
> +/*
> + * pqos.h: Platform QoS related service for guest.
> + *
> + * Copyright (c) 2013, Intel Corporation
> + * Author: Jiongxi Li <jiongxi.li@intel.com>
> + * Author: Dongxiao Xu <dongxiao.xu@intel.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
> + * Place - Suite 330, Boston, MA 02111-1307 USA.
> + */
> +#ifndef ASM_PQOS_H
> +#define ASM_PQOS_H
> +
> +/* QoS Resource Type Enumeration */
> +#define QOS_MONITOR_TYPE_L3 0x2
> +
> +/* QoS Monitoring Event ID */
> +#define QOS_MONITOR_EVTID_L3 0x1
> +
> +void init_platform_qos(void);
> +
> +#endif
next prev parent reply other threads:[~2013-11-29 13:59 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-29 5:48 [PATCH v3 0/7] enable Cache QoS Monitoring (CQM) feature dongxiao.xu
2013-11-29 5:48 ` [PATCH v3 1/7] x86: detect and initialize Cache QoS Monitoring feature dongxiao.xu
2013-11-29 13:54 ` Andrew Cooper
2013-11-29 15:05 ` Jan Beulich
2013-11-30 0:41 ` Xu, Dongxiao
2013-12-02 2:17 ` Xu, Dongxiao
2013-12-02 9:22 ` Xu, Dongxiao
2013-11-29 13:59 ` Andrew Cooper [this message]
2013-11-30 0:42 ` Xu, Dongxiao
2013-11-29 5:48 ` [PATCH v3 2/7] x86: handle CQM resource when creating/destroying guests dongxiao.xu
2013-11-29 14:18 ` Andrew Cooper
2013-11-29 15:01 ` Andrew Cooper
2013-11-29 15:07 ` Jan Beulich
2013-11-29 5:48 ` [PATCH v3 3/7] x86: dynamically attach/detach CQM service for a guest dongxiao.xu
2013-11-29 14:22 ` Andrew Cooper
2013-11-29 5:48 ` [PATCH v3 4/7] x86: collect CQM information from all sockets dongxiao.xu
2013-11-29 14:53 ` Andrew Cooper
2013-11-30 1:27 ` Xu, Dongxiao
2013-11-29 5:48 ` [PATCH v3 5/7] x86: enable CQM monitoring for each domain RMID dongxiao.xu
2013-11-29 14:56 ` Andrew Cooper
2013-11-30 1:27 ` Xu, Dongxiao
2013-11-29 5:48 ` [PATCH v3 6/7] xsm: add platform QoS related xsm policies dongxiao.xu
2013-11-29 15:50 ` Daniel De Graaf
2013-11-29 5:48 ` [PATCH v3 7/7] tools: enable Cache QoS Monitoring feature for libxl/libxc dongxiao.xu
2013-11-29 15:29 ` [PATCH v3 0/7] enable Cache QoS Monitoring (CQM) feature Ian Campbell
2013-11-29 15:36 ` Jan Beulich
2013-11-29 15:41 ` Ian Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52989DB3.4030100@citrix.com \
--to=andrew.cooper3@citrix.com \
--cc=Ian.Campbell@citrix.com \
--cc=Ian.Jackson@eu.citrix.com \
--cc=JBeulich@suse.com \
--cc=dgdegra@tycho.nsa.gov \
--cc=dongxiao.xu@intel.com \
--cc=keir@xen.org \
--cc=stefano.stabellini@eu.citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.