From: "Toralf Förster" <toralf.foerster@gmx.de>
To: Richard Weinberger <richard@nod.at>
Cc: UML devel <user-mode-linux-devel@lists.sourceforge.net>
Subject: Re: [uml-devel] does 3.12.2 breaks UML with "con=xterm" ?
Date: Sat, 30 Nov 2013 19:43:47 +0100 [thread overview]
Message-ID: <529A31E3.8070305@gmx.de> (raw)
In-Reply-To: <1708241.BcyNY8F1Qe@sandpuppy>
On 11/30/2013 07:23 PM, Richard Weinberger wrote:
> Sorry for being imprecise, I meant the raw output from UML, not GDB.
> Currently it looks like yet another cluster fuck within the winch-Thread.
>
> Thanks,
> //richard
ah - ok.
This is from the KOnsole starting the UML (FWIW the UML often starts,
but failed to get an IP address via DHCP and then suddenly all xterms vanishe w/o any further core dump)
tfoerste@n22 /mnt/ramdisk $ start_uml.sh -r ~/virtual/uml/trinity -y con=xterm -l /home/tfoerste/devel/linux/linux
+ /home/tfoerste/devel/linux/linux earlyprintk ubda=/home/tfoerste/virtual/uml/trinity ubdb=/mnt/ramdisk/trinity_swap eth0=tuntap,tap0,72:ef:3d:9f:c3:5a mem=1025M con=xterm umid=uml_trinity rootfstype=ext4 ''
Locating the bottom of the address space ... 0x1000
Locating the top of the address space ... 0xc0000000
Core dump limits :
soft - NONE
hard - NONE
Checking that ptrace can change system call numbers...OK
Checking syscall emulation patch for ptrace...OK
Checking advanced syscall emulation patch for ptrace...OK
Checking for tmpfs mount on /dev/shm.../dev/shm...OK
Checking PROT_EXEC mmap in /dev/shm/...OK
Checking for the skas3 patch in the host:
- /proc/mm...not found: No such file or directory
- PTRACE_FAULTINFO...not found
- PTRACE_LDT...not found
UML running in SKAS0 mode
Adding 23449600 bytes to physical memory to account for exec-shield gap
bootconsole [earlycon0] enabled
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
Sorting __ex_table...
Memory: 1025168K/1072500K available (3932K kernel code, 283K rwdata, 1516K rodata, 114K init, 180K bss, 47332K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:15
Calibrating delay loop... 2832.79 BogoMIPS (lpj=14163968)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Checking for host processor cmov support...Yes
Checking that host ptys support output SIGIO...Yes
Checking that host ptys support SIGIO on close...No, enabling workaround
devtmpfs: initialized
Using 2.6 host AIO
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switched to clocksource itimer
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 1024 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
console [stderr0] disabled
mconsole (version 2) initialized on /home/tfoerste/.uml/uml_trinity/mconsole
Checking host MADV_REMOVE support...OK
UML Audio Relay (host dsp = /dev/sound/dsp, host mixer = /dev/sound/mixer)
Host TLS support detected
Detected host type: i386 (GDT indexes 6 to 9)
audit: initializing netlink socket (disabled)
type=2000 audit(1385836514.952:1): initialized
zbud: loaded
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
msgmni has been set to 2002
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
loop: module loaded
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
TCP: cubic registered
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
Initialized stdio console driver
Console initialized on /dev/tty0
console [tty0] enabled
bootconsole [earlycon0] disabled
and it continues then with Gentoo's message in the xterm :
console [tty0] enabled
bootconsole [earlycon0] disabled
Initializing software serial port version 1
console [mc-1] enabled
ubda: unknown partition table
ubdb: unknown partition table
Netdevice 0 (72:ef:3d:9f:c3:5a) :
TUN/TAP backend -
EXT4-fs (ubda): INFO: recovery required on readonly filesystem
EXT4-fs (ubda): write access will be enabled during recovery
EXT4-fs (ubda): recovery complete
EXT4-fs (ubda): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 98:0.
devtmpfs: mounted
INIT: version 2.88 booting
OpenRC 0.12.4 is starting up Gentoo Linux (i686) [UML]
* Mounting /proc ... [ ok ]
* Mounting /run ...
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Using /dev mounted from kernel ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting /dev/pts ... [ ok ]
* Mounting /dev/shm ... [ ok ]
* Mounting /sys ... [ ok ]
* Mounting cgroup filesystem ... [ ok ]
* setting up tmpfiles.d entries for /dev ... [ ok ]
* Starting udev ... [ ok ]
* Generating a rule to create a /dev/root symlink ... [ ok ]
* Populating /dev with existing devices through uevents ... [ ok ]
* Waiting for uevents to be processed ... [ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Updating /etc/mtab ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Creating user login records ... [ ok ]
* Wiping /tmp directory ... [ ok ]
* Setting up dm-crypt mappings ...
* crypt-swap using: -c aes -h sha1 -d /dev/urandom create crypt-swap /dev/ubdb ... [ ok ]
* pre_mount: mkswap ${dev} ... [ ok ]
* Setting hostname to trinity ... [ ok ]
* Bringing up network interface lo ... [ ok ]
* Bringing up interface lo
* 127.0.0.1/8 ... [ ok ]
* Adding routes
* 127.0.0.0/8 via 127.0.0.1 ... [ ok ]
* Mounting misc binary format filesystem ... [ ok ]
* Loading custom binary format handlers ... [ ok ]
* Activating additional swap space ... [ ok ]
* setting up tmpfiles.d entries ... [ ok ]
* Initializing random number generator ... [ ok ]
INIT: Entering runlevel: 3
* Checking your configfile (/etc/syslog-ng/syslog-ng.conf) ... [ ok ]
* Starting syslog-ng ... [ ok ]
* Starting DHCP Client Daemon ...
* Starting haveged ... [ ok ]
* Starting rngd ... [ ok ]
* Starting sshd ... [ ok ]
* Starting vixie-cron ... [ ok ]
* Starting local
net.core.warnings = 0 [ ok ]
and syslog shows in another xterm :
Nov 30 19:38:28 trinity syslog-ng[1076]: syslog-ng starting up; version='3.4.2'
Nov 30 19:38:28 trinity kernel: Initializing cgroup subsys cpu
Nov 30 19:38:28 trinity kernel: Linux version 3.13.0-rc2 (tfoerste@n22) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.3, pie-0.5.5) ) #1 Sat Nov 30 19:09:51 CET 2013
Nov 30 19:38:28 trinity kernel: On node 0 totalpages: 265364
Nov 30 19:38:28 trinity kernel: free_area_init_node: node 0, pgdat 085f8b00, node_mem_map 0a025000
Nov 30 19:38:28 trinity kernel: Normal zone: 2074 pages used for memmap
Nov 30 19:38:28 trinity kernel: Normal zone: 0 pages reserved
Nov 30 19:38:28 trinity kernel: Normal zone: 265364 pages, LIFO batch:31
Nov 30 19:38:28 trinity kernel: pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Nov 30 19:38:28 trinity kernel: pcpu-alloc: [0] 0
Nov 30 19:38:28 trinity kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 263290
Nov 30 19:38:29 trinity kernel: Kernel command line: earlyprintk ubda=/home/tfoerste/virtual/uml/trinity ubdb=/mnt/ramdisk/trinity_swap eth0=tuntap,tap0,72:ef:3d:9f:c3:5a mem=1025M con=xterm rootfstype=ext4 root=98:0
Nov 30 19:38:29 trinity kernel: bootconsole [earlycon0] enabled
Nov 30 19:38:29 trinity kernel: PID hash table entries: 4096 (order: 2, 16384 bytes)
Nov 30 19:38:29 trinity kernel: Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Nov 30 19:38:29 trinity kernel: Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 30 19:38:29 trinity kernel: Sorting __ex_table...
Nov 30 19:38:29 trinity kernel: Memory: 1025316K/1061456K available (3932K kernel code, 283K rwdata, 1516K rodata, 114K init, 180K bss, 36140K reserved)
Nov 30 19:38:29 trinity kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Nov 30 19:38:29 trinity kernel: NR_IRQS:15
Nov 30 19:38:29 trinity kernel: Calibrating delay loop... 3822.38 BogoMIPS (lpj=19111936)
Nov 30 19:38:29 trinity kernel: pid_max: default: 32768 minimum: 301
Nov 30 19:38:29 trinity kernel: Mount-cache hash table entries: 512
Nov 30 19:38:29 trinity kernel: Checking for host processor cmov support...Yes
Nov 30 19:38:29 trinity kernel: Checking that host ptys support output SIGIO...Yes
Nov 30 19:38:29 trinity kernel: Checking that host ptys support SIGIO on close...No, enabling workaround
Nov 30 19:38:29 trinity kernel: devtmpfs: initialized
Nov 30 19:38:29 trinity kernel: Using 2.6 host AIO
Nov 30 19:38:29 trinity kernel: NET: Registered protocol family 16
Nov 30 19:38:29 trinity kernel: bio: create slab <bio-0> at 0
Nov 30 19:38:29 trinity kernel: Switched to clocksource itimer
Nov 30 19:38:29 trinity kernel: NET: Registered protocol family 2
Nov 30 19:38:29 trinity kernel: TCP established hash table entries: 16384 (order: 4, 65536 bytes)
Nov 30 19:38:29 trinity kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Nov 30 19:38:29 trinity kernel: TCP: Hash tables configured (established 16384 bind 16384)
Nov 30 19:38:29 trinity kernel: TCP: reno registered
Nov 30 19:38:29 trinity kernel: UDP hash table entries: 1024 (order: 2, 16384 bytes)
Nov 30 19:38:29 trinity kernel: UDP-Lite hash table entries: 1024 (order: 2, 16384 bytes)
Nov 30 19:38:29 trinity kernel: NET: Registered protocol family 1
Nov 30 19:38:29 trinity kernel: RPC: Registered named UNIX socket transport module.
Nov 30 19:38:29 trinity kernel: RPC: Registered udp transport module.
Nov 30 19:38:29 trinity kernel: RPC: Registered tcp transport module.
Nov 30 19:38:29 trinity kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Nov 30 19:38:29 trinity kernel: console [stderr0] disabled
Nov 30 19:38:29 trinity kernel: mconsole (version 2) initialized on /home/tfoerste/.uml/uml_trinity/mconsole
Nov 30 19:38:29 trinity kernel: Checking host MADV_REMOVE support...OK
Nov 30 19:38:29 trinity kernel: UML Audio Relay (host dsp = /dev/sound/dsp, host mixer = /dev/sound/mixer)
Nov 30 19:38:29 trinity kernel: Host TLS support detected
Nov 30 19:38:29 trinity kernel: Detected host type: i386 (GDT indexes 6 to 9)
Nov 30 19:38:29 trinity kernel: audit: initializing netlink socket (disabled)
Nov 30 19:38:29 trinity kernel: type=2000 audit(1385836664.270:1): initialized
Nov 30 19:38:29 trinity kernel: zbud: loaded
Nov 30 19:38:29 trinity kernel: NFS: Registering the id_resolver key type
Nov 30 19:38:29 trinity kernel: Key type id_resolver registered
Nov 30 19:38:29 trinity kernel: Key type id_legacy registered
Nov 30 19:38:29 trinity kernel: nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Nov 30 19:38:29 trinity kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Nov 30 19:38:29 trinity kernel: msgmni has been set to 2002
Nov 30 19:38:29 trinity kernel: alg: No test for stdrng (krng)
Nov 30 19:38:29 trinity kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Nov 30 19:38:29 trinity kernel: io scheduler noop registered (default)
Nov 30 19:38:29 trinity kernel: loop: module loaded
Nov 30 19:38:29 trinity kernel: device-mapper: uevent: version 1.0.3
Nov 30 19:38:29 trinity kernel: device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
Nov 30 19:38:29 trinity kernel: TCP: cubic registered
Nov 30 19:38:29 trinity kernel: NET: Registered protocol family 10
Nov 30 19:38:29 trinity kernel: sit: IPv6 over IPv4 tunneling driver
Nov 30 19:38:29 trinity kernel: NET: Registered protocol family 17
Nov 30 19:38:29 trinity kernel: Key type dns_resolver registered
Nov 30 19:38:29 trinity kernel: Initialized stdio console driver
Nov 30 19:38:29 trinity kernel: Console initialized on /dev/tty0
Nov 30 19:38:29 trinity kernel: console [tty0] enabled
Nov 30 19:38:29 trinity kernel: bootconsole [earlycon0] disabled
Nov 30 19:38:29 trinity kernel: Initializing software serial port version 1
Nov 30 19:38:29 trinity kernel: console [mc-1] enabled
Nov 30 19:38:29 trinity kernel: ubda: unknown partition table
Nov 30 19:38:29 trinity kernel: ubdb: unknown partition table
Nov 30 19:38:29 trinity kernel: Netdevice 0 (72:ef:3d:9f:c3:5a) :
Nov 30 19:38:29 trinity kernel: TUN/TAP backend -
Nov 30 19:38:29 trinity kernel: EXT4-fs (ubda): INFO: recovery required on readonly filesystem
Nov 30 19:38:29 trinity kernel: EXT4-fs (ubda): write access will be enabled during recovery
Nov 30 19:38:29 trinity kernel: EXT4-fs (ubda): recovery complete
Nov 30 19:38:29 trinity kernel: EXT4-fs (ubda): mounted filesystem with ordered data mode. Opts: (null)
Nov 30 19:38:29 trinity kernel: VFS: Mounted root (ext4 filesystem) readonly on device 98:0.
Nov 30 19:38:29 trinity kernel: devtmpfs: mounted
Nov 30 19:38:29 trinity kernel[536]: starting version 204
Nov 30 19:38:29 trinity kernel: random: nonblocking pool is initialized
Nov 30 19:38:29 trinity kernel: EXT4-fs (ubda): re-mounted. Opts: (null)
Nov 30 19:38:29 trinity kernel: bio: create slab <bio-1> at 1
Nov 30 19:38:29 trinity kernel: Adding 262140k swap on /dev/mapper/crypt-swap. Priority:-1 extents:1 across:262140k FS
Nov 30 19:38:29 trinity kernel: type=1006 audit(1385836708.020:2): pid=1074 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
Nov 30 19:38:29 trinity dhcpcd[1098]: version 5.6.4 starting
Nov 30 19:38:30 trinity dhcpcd[1098]: sit0: unsupported interface type 308, falling back to ethernet
Nov 30 19:38:31 trinity dhcpcd[1098]: sit0: broadcasting for a lease
Nov 30 19:38:31 trinity dhcpcd[1098]: eth0: sending IPv6 Router Solicitation
Nov 30 19:38:31 trinity dhcpcd[1098]: eth0: checking for 169.254.229.237
Nov 30 19:38:35 trinity dhcpcd[1098]: eth0: sending IPv6 Router Solicitation
Nov 30 19:38:36 trinity dhcpcd[1098]: eth0: using IPv4LL address 169.254.229.237
Nov 30 19:38:37 trinity dhcpcd[1098]: forked to background, child pid 1138
Nov 30 19:38:38 trinity haveged: haveged starting up
Nov 30 19:38:39 trinity haveged: haveged: ver: 1.7a; arch: x86; vend: GenuineIntel; opts: (T); collect: 128K
Nov 30 19:38:39 trinity haveged: haveged: cpu: (L4 VC); data: 32K (L4); inst: 32K (L4); idx: 18/40; sz: 32190/69480
Nov 30 19:38:39 trinity haveged: haveged: tot tests: BA8: A:1/0 B: 1/0; continuous tests: B: A:0/0 B: 0/0; last entropy estimate 7.99992
Nov 30 19:38:39 trinity haveged: haveged: fills: 0, generated: 0
Nov 30 19:38:39 trinity dhcpcd[1138]: eth0: sending IPv6 Router Solicitation
Nov 30 19:38:41 trinity dhcpcd[1138]: eth0: broadcasting for a lease
Nov 30 19:38:44 trinity dhcpcd[1138]: eth0: sending IPv6 Router Solicitation
Nov 30 19:38:44 trinity dhcpcd[1138]: eth0: no IPv6 Routers available
Nov 30 19:38:45 trinity cron[1228]: (CRON) STARTUP (V5.0)
Nov 30 19:38:45 trinity kernel: [sched_delayed] sched: RT throttling activated
Nov 30 19:40:01 trinity cron[1257]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons)
after another minute now all xterms are away ....
--
MfG/Sincerely
Toralf Förster
pgp finger print: 7B1A 07F4 EC82 0F90 D4C2 8936 872A E508 7DB6 9DA3
------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application performance
affects their revenue. With AppDynamics, you get 100% visibility into your
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
next prev parent reply other threads:[~2013-11-30 18:43 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-30 14:37 [uml-devel] does 3.12.2 breaks UML with "con=xterm" ? Toralf Förster
2013-11-30 14:43 ` Toralf Förster
2013-11-30 14:51 ` Richard Weinberger
2013-11-30 15:56 ` Toralf Förster
2013-11-30 16:28 ` Toralf Förster
2013-11-30 16:36 ` Richard Weinberger
2013-11-30 17:26 ` Toralf Förster
2013-11-30 17:35 ` Richard Weinberger
2013-11-30 18:19 ` Toralf Förster
2013-11-30 18:23 ` Richard Weinberger
2013-11-30 18:43 ` Toralf Förster [this message]
2013-11-30 23:19 ` Richard Weinberger
2013-12-01 10:17 ` Toralf Förster
2013-12-01 10:20 ` Richard Weinberger
2013-12-01 17:07 ` Toralf Förster
2013-12-01 19:05 ` Toralf Förster
2013-12-02 16:42 ` Boaz Harrosh
2013-12-02 21:21 ` Richard Weinberger
2013-12-02 21:32 ` Toralf Förster
2013-12-02 21:59 ` Richard Weinberger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=529A31E3.8070305@gmx.de \
--to=toralf.foerster@gmx.de \
--cc=richard@nod.at \
--cc=user-mode-linux-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.