All of lore.kernel.org
 help / color / mirror / Atom feed
From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval
Date: Tue, 3 Dec 2013 15:15:45 +0100	[thread overview]
Message-ID: <529DE791.6080007@atmel.com> (raw)
In-Reply-To: <1386079669-3995-4-git-send-email-b.brezillon@overkiz.com>

On 03/12/2013 15:07, Boris BREZILLON :
> Replace clk_get calls by devm_clk_get calls.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
> Tested-by: Robert Nelson <robertcnelson@gmail.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Thanks Boris for these fixes.

Alan, Greg, can you take the whole series as fixes for 3.13?

Thanks, best regards,

> ---
>   drivers/usb/host/ohci-at91.c |   32 ++++++++------------------------
>   1 file changed, 8 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
> index c406f1e..3652962 100644
> --- a/drivers/usb/host/ohci-at91.c
> +++ b/drivers/usb/host/ohci-at91.c
> @@ -164,30 +164,30 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
>   		goto err;
>   	}
>
> -	iclk = clk_get(&pdev->dev, "ohci_clk");
> +	iclk = devm_clk_get(dev, "ohci_clk");
>   	if (IS_ERR(iclk)) {
> -		dev_err(&pdev->dev, "failed to get ohci_clk\n");
> +		dev_err(dev, "failed to get ohci_clk\n");
>   		retval = PTR_ERR(iclk);
>   		goto err;
>   	}
> -	fclk = clk_get(&pdev->dev, "uhpck");
> +	fclk = devm_clk_get(dev, "uhpck");
>   	if (IS_ERR(fclk)) {
>   		dev_err(&pdev->dev, "failed to get uhpck\n");
>   		retval = PTR_ERR(fclk);
> -		goto err4;
> +		goto err;
>   	}
> -	hclk = clk_get(&pdev->dev, "hclk");
> +	hclk = devm_clk_get(dev, "hclk");
>   	if (IS_ERR(hclk)) {
>   		dev_err(&pdev->dev, "failed to get hclk\n");
>   		retval = PTR_ERR(hclk);
> -		goto err5;
> +		goto err;
>   	}
>   	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
> -		uclk = clk_get(&pdev->dev, "usb_clk");
> +		uclk = devm_clk_get(&pdev->dev, "usb_clk");
>   		if (IS_ERR(uclk)) {
>   			dev_err(&pdev->dev, "failed to get uclk\n");
>   			retval = PTR_ERR(uclk);
> -			goto err6;
> +			goto err;
>   		}
>   	}
>
> @@ -203,15 +203,6 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
>   	/* Error handling */
>   	at91_stop_hc(pdev);
>
> -	if (IS_ENABLED(CONFIG_COMMON_CLK))
> -		clk_put(uclk);
> - err6:
> -	clk_put(hclk);
> - err5:
> -	clk_put(fclk);
> - err4:
> -	clk_put(iclk);
> -
>    err:
>   	usb_put_hcd(hcd);
>   	return retval;
> @@ -236,13 +227,6 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd,
>   	usb_remove_hcd(hcd);
>   	at91_stop_hc(pdev);
>   	usb_put_hcd(hcd);
> -
> -	if (IS_ENABLED(CONFIG_COMMON_CLK))
> -		clk_put(uclk);
> -	clk_put(hclk);
> -	clk_put(fclk);
> -	clk_put(iclk);
> -	fclk = iclk = hclk = NULL;
>   }
>
>   /*-------------------------------------------------------------------------*/
>


-- 
Nicolas Ferre

WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Boris BREZILLON <b.brezillon@overkiz.com>,
	Douglas Gilbert <dgilbert@interlog.com>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	Alan Stern <stern@rowland.harvard.edu>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Grant Likely <grant.likely@linaro.org>,
	<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval
Date: Tue, 3 Dec 2013 15:15:45 +0100	[thread overview]
Message-ID: <529DE791.6080007@atmel.com> (raw)
In-Reply-To: <1386079669-3995-4-git-send-email-b.brezillon@overkiz.com>

On 03/12/2013 15:07, Boris BREZILLON :
> Replace clk_get calls by devm_clk_get calls.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
> Tested-by: Robert Nelson <robertcnelson@gmail.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Thanks Boris for these fixes.

Alan, Greg, can you take the whole series as fixes for 3.13?

Thanks, best regards,

> ---
>   drivers/usb/host/ohci-at91.c |   32 ++++++++------------------------
>   1 file changed, 8 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
> index c406f1e..3652962 100644
> --- a/drivers/usb/host/ohci-at91.c
> +++ b/drivers/usb/host/ohci-at91.c
> @@ -164,30 +164,30 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
>   		goto err;
>   	}
>
> -	iclk = clk_get(&pdev->dev, "ohci_clk");
> +	iclk = devm_clk_get(dev, "ohci_clk");
>   	if (IS_ERR(iclk)) {
> -		dev_err(&pdev->dev, "failed to get ohci_clk\n");
> +		dev_err(dev, "failed to get ohci_clk\n");
>   		retval = PTR_ERR(iclk);
>   		goto err;
>   	}
> -	fclk = clk_get(&pdev->dev, "uhpck");
> +	fclk = devm_clk_get(dev, "uhpck");
>   	if (IS_ERR(fclk)) {
>   		dev_err(&pdev->dev, "failed to get uhpck\n");
>   		retval = PTR_ERR(fclk);
> -		goto err4;
> +		goto err;
>   	}
> -	hclk = clk_get(&pdev->dev, "hclk");
> +	hclk = devm_clk_get(dev, "hclk");
>   	if (IS_ERR(hclk)) {
>   		dev_err(&pdev->dev, "failed to get hclk\n");
>   		retval = PTR_ERR(hclk);
> -		goto err5;
> +		goto err;
>   	}
>   	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
> -		uclk = clk_get(&pdev->dev, "usb_clk");
> +		uclk = devm_clk_get(&pdev->dev, "usb_clk");
>   		if (IS_ERR(uclk)) {
>   			dev_err(&pdev->dev, "failed to get uclk\n");
>   			retval = PTR_ERR(uclk);
> -			goto err6;
> +			goto err;
>   		}
>   	}
>
> @@ -203,15 +203,6 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
>   	/* Error handling */
>   	at91_stop_hc(pdev);
>
> -	if (IS_ENABLED(CONFIG_COMMON_CLK))
> -		clk_put(uclk);
> - err6:
> -	clk_put(hclk);
> - err5:
> -	clk_put(fclk);
> - err4:
> -	clk_put(iclk);
> -
>    err:
>   	usb_put_hcd(hcd);
>   	return retval;
> @@ -236,13 +227,6 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd,
>   	usb_remove_hcd(hcd);
>   	at91_stop_hc(pdev);
>   	usb_put_hcd(hcd);
> -
> -	if (IS_ENABLED(CONFIG_COMMON_CLK))
> -		clk_put(uclk);
> -	clk_put(hclk);
> -	clk_put(fclk);
> -	clk_put(iclk);
> -	fclk = iclk = hclk = NULL;
>   }
>
>   /*-------------------------------------------------------------------------*/
>


-- 
Nicolas Ferre

  reply	other threads:[~2013-12-03 14:15 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-03 14:07 [PATCH 0/3] usb: ohci-at91: various fixes and improvements Boris BREZILLON
2013-12-03 14:07 ` Boris BREZILLON
2013-12-03 14:07 ` [PATCH 1/3] usb: ohci-at91: fix irq and iomem resource retrieval Boris BREZILLON
2013-12-03 14:07   ` Boris BREZILLON
2013-12-03 14:13   ` Nicolas Ferre
2013-12-03 14:13     ` Nicolas Ferre
2013-12-03 14:07 ` [PATCH 2/3] usb: ohci-at91: replace request_mem_region + ioremap by devm_request_and_ioremap Boris BREZILLON
2013-12-03 14:07   ` Boris BREZILLON
2013-12-03 14:14   ` Nicolas Ferre
2013-12-03 14:14     ` Nicolas Ferre
2013-12-03 14:07 ` [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval Boris BREZILLON
2013-12-03 14:07   ` Boris BREZILLON
2013-12-03 14:15   ` Nicolas Ferre [this message]
2013-12-03 14:15     ` Nicolas Ferre
2013-12-03 15:32     ` Alan Stern
2013-12-03 15:32       ` Alan Stern
2013-12-04  8:32       ` boris brezillon
2013-12-04  8:32         ` boris brezillon
2013-12-04 15:21         ` Alan Stern
2013-12-04 15:21           ` Alan Stern
2013-12-04 15:51           ` Douglas Gilbert
2013-12-04 15:51             ` Douglas Gilbert
2013-12-04 15:59             ` Tomasz Figa
2013-12-04 15:59               ` Tomasz Figa
2013-12-03 18:01   ` Sergei Shtylyov
2013-12-03 18:01     ` Sergei Shtylyov
2013-12-03 17:20     ` boris brezillon
2013-12-03 17:20       ` boris brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=529DE791.6080007@atmel.com \
    --to=nicolas.ferre@atmel.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.