From: Vlastimil Babka <vbabka@suse.cz>
To: Mel Gorman <mgorman@suse.de>, Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Rik van Riel <riel@redhat.com>
Subject: Re: [PATCH] mm: compaction: Trace compaction begin and end
Date: Wed, 04 Dec 2013 15:51:57 +0100 [thread overview]
Message-ID: <529F418D.3070108@suse.cz> (raw)
In-Reply-To: <20131204143045.GZ11295@suse.de>
On 12/04/2013 03:30 PM, Mel Gorman wrote:
> This patch adds two tracepoints for compaction begin and end of a zone. Using
> this it is possible to calculate how much time a workload is spending
> within compaction and potentially debug problems related to cached pfns
> for scanning.
I guess for debugging pfns it would be also useful to print their values
also in mm_compaction_end.
> In combination with the direct reclaim and slab trace points
> it should be possible to estimate most allocation-related overhead for
> a workload.
>
> Signed-off-by: Mel Gorman <mgorman@suse.de>
> ---
> include/trace/events/compaction.h | 42 +++++++++++++++++++++++++++++++++++++++
> mm/compaction.c | 4 ++++
> 2 files changed, 46 insertions(+)
>
> diff --git a/include/trace/events/compaction.h b/include/trace/events/compaction.h
> index fde1b3e..f4e115a 100644
> --- a/include/trace/events/compaction.h
> +++ b/include/trace/events/compaction.h
> @@ -67,6 +67,48 @@ TRACE_EVENT(mm_compaction_migratepages,
> __entry->nr_failed)
> );
>
> +TRACE_EVENT(mm_compaction_begin,
> + TP_PROTO(unsigned long zone_start, unsigned long migrate_start,
> + unsigned long zone_end, unsigned long free_start),
> +
> + TP_ARGS(zone_start, migrate_start, zone_end, free_start),
IMHO a better order would be:
zone_start, migrate_start, free_start, zone_end
(well especially in the TP_printk part anyway).
> +
> + TP_STRUCT__entry(
> + __field(unsigned long, zone_start)
> + __field(unsigned long, migrate_start)
> + __field(unsigned long, zone_end)
> + __field(unsigned long, free_start)
> + ),
> +
> + TP_fast_assign(
> + __entry->zone_start = zone_start;
> + __entry->migrate_start = migrate_start;
> + __entry->zone_end = zone_end;
> + __entry->free_start = free_start;
> + ),
> +
> + TP_printk("zone_start=%lu migrate_start=%lu zone_end=%lu free_start=%lu",
> + __entry->zone_start,
> + __entry->migrate_start,
> + __entry->zone_end,
> + __entry->free_start)
> +);
> +
> +TRACE_EVENT(mm_compaction_end,
> + TP_PROTO(int status),
> +
> + TP_ARGS(status),
> +
> + TP_STRUCT__entry(
> + __field(int, status)
> + ),
> +
> + TP_fast_assign(
> + __entry->status = status;
> + ),
> +
> + TP_printk("status=%d", __entry->status)
> +);
>
> #endif /* _TRACE_COMPACTION_H */
>
> diff --git a/mm/compaction.c b/mm/compaction.c
> index c437893..78ff866 100644
> --- a/mm/compaction.c
> +++ b/mm/compaction.c
> @@ -960,6 +960,8 @@ static int compact_zone(struct zone *zone, struct compact_control *cc)
> if (compaction_restarting(zone, cc->order) && !current_is_kswapd())
> __reset_isolation_suitable(zone);
>
> + trace_mm_compaction_begin(start_pfn, cc->migrate_pfn, end_pfn, cc->free_pfn);
> +
> migrate_prep_local();
>
> while ((ret = compact_finished(zone, cc)) == COMPACT_CONTINUE) {
> @@ -1005,6 +1007,8 @@ out:
> cc->nr_freepages -= release_freepages(&cc->freepages);
> VM_BUG_ON(cc->nr_freepages != 0);
>
> + trace_mm_compaction_end(ret);
> +
> return ret;
> }
>
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
WARNING: multiple messages have this Message-ID (diff)
From: Vlastimil Babka <vbabka@suse.cz>
To: Mel Gorman <mgorman@suse.de>, Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Rik van Riel <riel@redhat.com>
Subject: Re: [PATCH] mm: compaction: Trace compaction begin and end
Date: Wed, 04 Dec 2013 15:51:57 +0100 [thread overview]
Message-ID: <529F418D.3070108@suse.cz> (raw)
In-Reply-To: <20131204143045.GZ11295@suse.de>
On 12/04/2013 03:30 PM, Mel Gorman wrote:
> This patch adds two tracepoints for compaction begin and end of a zone. Using
> this it is possible to calculate how much time a workload is spending
> within compaction and potentially debug problems related to cached pfns
> for scanning.
I guess for debugging pfns it would be also useful to print their values
also in mm_compaction_end.
> In combination with the direct reclaim and slab trace points
> it should be possible to estimate most allocation-related overhead for
> a workload.
>
> Signed-off-by: Mel Gorman <mgorman@suse.de>
> ---
> include/trace/events/compaction.h | 42 +++++++++++++++++++++++++++++++++++++++
> mm/compaction.c | 4 ++++
> 2 files changed, 46 insertions(+)
>
> diff --git a/include/trace/events/compaction.h b/include/trace/events/compaction.h
> index fde1b3e..f4e115a 100644
> --- a/include/trace/events/compaction.h
> +++ b/include/trace/events/compaction.h
> @@ -67,6 +67,48 @@ TRACE_EVENT(mm_compaction_migratepages,
> __entry->nr_failed)
> );
>
> +TRACE_EVENT(mm_compaction_begin,
> + TP_PROTO(unsigned long zone_start, unsigned long migrate_start,
> + unsigned long zone_end, unsigned long free_start),
> +
> + TP_ARGS(zone_start, migrate_start, zone_end, free_start),
IMHO a better order would be:
zone_start, migrate_start, free_start, zone_end
(well especially in the TP_printk part anyway).
> +
> + TP_STRUCT__entry(
> + __field(unsigned long, zone_start)
> + __field(unsigned long, migrate_start)
> + __field(unsigned long, zone_end)
> + __field(unsigned long, free_start)
> + ),
> +
> + TP_fast_assign(
> + __entry->zone_start = zone_start;
> + __entry->migrate_start = migrate_start;
> + __entry->zone_end = zone_end;
> + __entry->free_start = free_start;
> + ),
> +
> + TP_printk("zone_start=%lu migrate_start=%lu zone_end=%lu free_start=%lu",
> + __entry->zone_start,
> + __entry->migrate_start,
> + __entry->zone_end,
> + __entry->free_start)
> +);
> +
> +TRACE_EVENT(mm_compaction_end,
> + TP_PROTO(int status),
> +
> + TP_ARGS(status),
> +
> + TP_STRUCT__entry(
> + __field(int, status)
> + ),
> +
> + TP_fast_assign(
> + __entry->status = status;
> + ),
> +
> + TP_printk("status=%d", __entry->status)
> +);
>
> #endif /* _TRACE_COMPACTION_H */
>
> diff --git a/mm/compaction.c b/mm/compaction.c
> index c437893..78ff866 100644
> --- a/mm/compaction.c
> +++ b/mm/compaction.c
> @@ -960,6 +960,8 @@ static int compact_zone(struct zone *zone, struct compact_control *cc)
> if (compaction_restarting(zone, cc->order) && !current_is_kswapd())
> __reset_isolation_suitable(zone);
>
> + trace_mm_compaction_begin(start_pfn, cc->migrate_pfn, end_pfn, cc->free_pfn);
> +
> migrate_prep_local();
>
> while ((ret = compact_finished(zone, cc)) == COMPACT_CONTINUE) {
> @@ -1005,6 +1007,8 @@ out:
> cc->nr_freepages -= release_freepages(&cc->freepages);
> VM_BUG_ON(cc->nr_freepages != 0);
>
> + trace_mm_compaction_end(ret);
> +
> return ret;
> }
>
>
next prev parent reply other threads:[~2013-12-04 14:52 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-25 14:26 [RFC PATCH 0/5] Memory compaction efficiency improvements Vlastimil Babka
2013-11-25 14:26 ` Vlastimil Babka
2013-11-25 14:26 ` [PATCH 1/5] mm: compaction: encapsulate defer reset logic Vlastimil Babka
2013-11-25 14:26 ` Vlastimil Babka
2013-11-25 22:08 ` Rik van Riel
2013-11-25 22:08 ` Rik van Riel
2013-11-26 10:16 ` Mel Gorman
2013-11-26 10:16 ` Mel Gorman
2013-11-25 14:26 ` [PATCH 2/5] mm: compaction: reset cached scanner pfn's before reading them Vlastimil Babka
2013-11-25 14:26 ` Vlastimil Babka
2013-11-26 10:23 ` Mel Gorman
2013-11-26 10:23 ` Mel Gorman
2013-11-26 13:16 ` Rik van Riel
2013-11-26 13:16 ` Rik van Riel
2013-11-25 14:26 ` [PATCH 3/5] mm: compaction: detect when scanners meet in isolate_freepages Vlastimil Babka
2013-11-25 14:26 ` Vlastimil Babka
2013-11-26 10:45 ` Mel Gorman
2013-11-26 10:45 ` Mel Gorman
2013-11-26 16:44 ` Vlastimil Babka
2013-11-26 16:44 ` Vlastimil Babka
2013-11-25 14:26 ` [PATCH 4/5] mm: compaction: do not mark unmovable pageblocks as skipped in async compaction Vlastimil Babka
2013-11-25 14:26 ` Vlastimil Babka
2013-11-26 10:58 ` Mel Gorman
2013-11-26 10:58 ` Mel Gorman
2013-11-25 14:26 ` [PATCH 5/5] mm: compaction: reset scanner positions immediately when they meet Vlastimil Babka
2013-11-25 14:26 ` Vlastimil Babka
2013-11-26 11:03 ` Mel Gorman
2013-11-26 11:03 ` Mel Gorman
2013-12-04 14:30 ` [PATCH] mm: compaction: Trace compaction begin and end Mel Gorman
2013-12-04 14:30 ` Mel Gorman
2013-12-04 14:51 ` Vlastimil Babka [this message]
2013-12-04 14:51 ` Vlastimil Babka
2013-12-05 9:05 ` Mel Gorman
2013-12-05 9:05 ` Mel Gorman
2013-12-06 9:50 ` Vlastimil Babka
2013-12-06 9:50 ` Vlastimil Babka
2013-12-05 9:07 ` [PATCH] mm: compaction: Trace compaction begin and end v2 Mel Gorman
2013-12-05 9:07 ` Mel Gorman
2013-12-06 9:50 ` Vlastimil Babka
2013-12-06 9:50 ` Vlastimil Babka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=529F418D.3070108@suse.cz \
--to=vbabka@suse.cz \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=riel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.