From: Larry Finger <Larry.Finger@lwfinger.net>
To: "Nikita N." <nikitan@operamail.com>, linux-wireless@vger.kernel.org
Subject: Re: RTL8187 bugs
Date: Wed, 04 Dec 2013 14:49:20 -0600 [thread overview]
Message-ID: <529F9550.7030604@lwfinger.net> (raw)
In-Reply-To: <1386143567.23274.55300753.5C861343@webmail.messagingengine.com>
On 12/04/2013 01:52 AM, Nikita N. wrote:
> Hi Larry :) thank you very much for the comments on my patch, really
> appreciated.
>
> Anyway, lets try to stick on the issue, ok?
> The issue is the malfunction of *MONITOR* mode.
> I can't see any monitor mode call from your log, you tested only managed
> mode, isn't it?
> I repeat, managed mode works perfectly also in my interfaces, no need to
> test it.
> We need to test *MONITOR* mode.
>
> Since you say that at you, the *MONITOR* mode works ok, I need to
> reproduce your environment here, in order to test the *MONITOR* mode.
> As already asked in previous email, what OS Linux distro do you use
> exactly when you test *MONITOR* mode in your 8187 interfaces?
> What programs suite do you use exactly when you test *MONITOR* mode in
> your 8187 interfaces?
Until I fixed your patch, I could not be assured that it would work. I get
nervous when that small a patch generates that many warhings.
I was finally able to test monitor mode this morning, and found that it is
failing for kernel 3.13-rc2 as you said. The system set promiscous mode, but no
off-channel data is returned. I use openSUSE 13.1 on an ancient laptop. It is
installed without X - not enough memory. I use kismet to capture over-the-air
data. I am currently building a v3.0 kernel to see when the failure happened. At
least I am pretty sure that I used rtl8187 in monitor mode in the past.
The logged data for my most recent run is
[ 295.841561] device wlan2 entered promiscuous mode
[ 295.842068] rtl8187_configure_filter
[ 295.842104] IN>changed_flags=0x3 ,total_flags=0x80000001 ,multicast=0x3
,priv->rx_conf=0x9094fc0e
[ 295.842114] >FIF_ALLMULTI
[ 295.842190] OUT>total_flags=0x2 ,priv->rx_conf=0x9094fc0e
[ 295.901636] rtl8187_configure_filter
[ 295.901690] IN>changed_flags=0xf3 ,total_flags=0x800000f1 ,multicast=0x3
,priv->rx_conf=0x9094fc0e
[ 295.901702] >FIF_CONTROL
[ 295.901711] >FIF_OTHER_BSS
[ 295.902016] >FIF_ALLMULTI, ***** Also has FIF_PSPOLL and FIF_PROBE_REQ set
[ 295.902113] OUT>total_flags=0x62 ,priv->rx_conf=0x909cfc0f
[ 296.279678] device wlan2mon entered promiscuous mode
[ 296.282327] rtl8187_configure_filter
[ 296.282363] IN>changed_flags=0x93 ,total_flags=0x800000f1 ,multicast=0x3
,priv->rx_conf=0x909cfc0f
[ 296.282373] >FIF_ALLMULTI
[ 296.282445] OUT>total_flags=0x62 ,priv->rx_conf=0x909cfc0f
Larry
next prev parent reply other threads:[~2013-12-04 20:49 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-27 22:06 RTL8187 bugs Nikita N.
2013-11-27 22:08 ` Larry Finger
2013-11-27 22:59 ` Nikita N.
2013-11-27 23:30 ` Larry Finger
2013-11-28 17:44 ` Nikita N.
2013-11-29 2:46 ` Larry Finger
2013-11-29 6:26 ` Nikita N.
2013-11-30 13:48 ` Fwd: " Nikita N.
2013-11-30 13:45 ` Nikita N.
2013-11-28 0:04 ` Larry Finger
2013-11-30 12:03 ` Nikita N.
2013-11-30 13:50 ` Fwd: " Nikita N.
2013-11-30 17:07 ` Larry Finger
2013-11-30 18:23 ` Nikita N.
2013-11-30 19:04 ` Larry Finger
2013-12-01 9:23 ` Nikita N.
2013-12-03 13:59 ` Nikita N.
2013-12-03 16:05 ` Larry Finger
2013-12-03 21:21 ` Nikita N.
2013-12-04 2:32 ` Larry Finger
2013-12-04 7:52 ` Nikita N.
2013-12-04 20:49 ` Larry Finger [this message]
2013-12-05 7:46 ` Nikita N.
2013-12-05 12:51 ` Nikita N.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=529F9550.7030604@lwfinger.net \
--to=larry.finger@lwfinger.net \
--cc=linux-wireless@vger.kernel.org \
--cc=nikitan@operamail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.