From: Sam <blue-t@web.de>
To: linux-wireless@vger.kernel.org
Subject: AVM Fritz Stick N v2 has troubles loading the driver rt2x00
Date: Thu, 05 Dec 2013 19:10:48 +0100 [thread overview]
Message-ID: <52A0C1A8.5020504@web.de> (raw)
In-Reply-To: <528BBFAE.4050900@web.de>
Hello,
I recently tried to get my AVM Fritz Stick N v2 working under Kubuntu
13.04 with a new 3.12 kernel from the mainline ppa after i
heard it was supported in this driver.
Here some diagnostic logs:
lsusb
Bus 001 Device 004: ID 057c:8501 AVM GmbH
uname -a
Linux greyback 3.12.0-031200rc2-generic #201309231935 SMP Mon Sep 23 23:37:12 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
Error from dmesg:
[ 23.011160] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
[ 23.048498] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x09 failed for offset 0x0000 with error -32
[ 23.048539] ieee80211 phy0: rt2x00lib_probe_dev: Error - Failed to allocate device
[ 23.048586] rt2800usb: probe of 1-1.3:1.0 failed with error -32
[ 23.048641] usbcore: registered new interface driver rt2800usb
It is detected , driver modules are loaded according to lsmod.
According to the internet this stick is featuring a RT 5572, even though this log says something different.
What is going south here?
Regards
Sam
parent reply other threads:[~2013-12-05 18:10 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <528BBFAE.4050900@web.de>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52A0C1A8.5020504@web.de \
--to=blue-t@web.de \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.