From: Kukjin Kim <kgene.kim@samsung.com>
To: Sachin Kamat <sachin.kamat@linaro.org>
Cc: linux-samsung-soc@vger.kernel.org, kgene.kim@samsung.com,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Subject: Re: [PATCH v2] ARM: dts: Add regulator entries to Exynos5420 SMDK board
Date: Tue, 10 Dec 2013 06:27:27 +0900 [thread overview]
Message-ID: <52A635BF.9030102@samsung.com> (raw)
In-Reply-To: <1386236664-27763-1-git-send-email-sachin.kamat@linaro.org>
On 12/05/13 18:44, Sachin Kamat wrote:
> Added regulator entries to Exynos5420 SMDK board.
>
> Signed-off-by: Sachin Kamat<sachin.kamat@linaro.org>
> ---
> Changes since v1:
> Changed node name
> ---
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 216 +++++++++++++++++++++++++++++
> 1 file changed, 216 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> index fb5a1e25c632..62e1ebe4e989 100644
> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> @@ -120,4 +120,220 @@
> reg =<0x50>;
> };
> };
> +
> + hsi2c_4: i2c@12CA0000 {
> + status = "okay";
> +
> + s2mps11_pmic@66 {
> + compatible = "samsung,s2mps11-pmic";
> + reg =<0x66>;
> + s2mps11,buck2-ramp-delay =<12>;
> + s2mps11,buck34-ramp-delay =<12>;
> + s2mps11,buck16-ramp-delay =<12>;
> + s2mps11,buck6-ramp-enable =<1>;
> + s2mps11,buck2-ramp-enable =<1>;
> + s2mps11,buck3-ramp-enable =<1>;
> + s2mps11,buck4-ramp-enable =<1>;
> +
> + s2mps11_osc: clocks {
> + #clock-cells =<1>;
> + clock-output-names = "s2mps11_ap",
> + "s2mps11_cp", "s2mps11_bt";
> + };
> +
> + regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "vdd_ldo1";
> + regulator-min-microvolt =<1000000>;
> + regulator-max-microvolt =<1000000>;
> + regulator-always-on;
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "vdd_ldo3";
> + regulator-min-microvolt =<1800000>;
> + regulator-max-microvolt =<1800000>;
> + regulator-always-on;
> + };
> +
> + ldo5_reg: LDO5 {
> + regulator-name = "vdd_ldo5";
> + regulator-min-microvolt =<1800000>;
> + regulator-max-microvolt =<1800000>;
> + regulator-always-on;
> + };
> +
> + ldo6_reg: LDO6 {
> + regulator-name = "vdd_ldo6";
> + regulator-min-microvolt =<1000000>;
> + regulator-max-microvolt =<1000000>;
> + regulator-always-on;
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "vdd_ldo7";
> + regulator-min-microvolt =<1800000>;
> + regulator-max-microvolt =<1800000>;
> + regulator-always-on;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "vdd_ldo8";
> + regulator-min-microvolt =<1800000>;
> + regulator-max-microvolt =<1800000>;
> + regulator-always-on;
> + };
> +
> + ldo9_reg: LDO9 {
> + regulator-name = "vdd_ldo9";
> + regulator-min-microvolt =<3000000>;
> + regulator-max-microvolt =<3000000>;
> + regulator-always-on;
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "vdd_ldo10";
> + regulator-min-microvolt =<1800000>;
> + regulator-max-microvolt =<1800000>;
> + regulator-always-on;
> + };
> +
> + ldo11_reg: LDO11 {
> + regulator-name = "vdd_ldo11";
> + regulator-min-microvolt =<1000000>;
> + regulator-max-microvolt =<1000000>;
> + regulator-always-on;
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "vdd_ldo12";
> + regulator-min-microvolt =<1800000>;
> + regulator-max-microvolt =<1800000>;
> + regulator-always-on;
> + };
> +
> + ldo13_reg: LDO13 {
> + regulator-name = "vdd_ldo13";
> + regulator-min-microvolt =<2800000>;
> + regulator-max-microvolt =<2800000>;
> + regulator-always-on;
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "vdd_ldo15";
> + regulator-min-microvolt =<3100000>;
> + regulator-max-microvolt =<3100000>;
> + regulator-always-on;
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "vdd_ldo16";
> + regulator-min-microvolt =<2200000>;
> + regulator-max-microvolt =<2200000>;
> + regulator-always-on;
> + };
> +
> + ldo17_reg: LDO17 {
> + regulator-name = "tsp_avdd";
> + regulator-min-microvolt =<3300000>;
> + regulator-max-microvolt =<3300000>;
> + regulator-always-on;
> + };
> +
> + ldo19_reg: LDO19 {
> + regulator-name = "vdd_sd";
> + regulator-min-microvolt =<2800000>;
> + regulator-max-microvolt =<2800000>;
> + regulator-always-on;
> + };
> +
> + ldo24_reg: LDO24 {
> + regulator-name = "tsp_io";
> + regulator-min-microvolt =<2800000>;
> + regulator-max-microvolt =<2800000>;
> + regulator-always-on;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "vdd_mif";
> + regulator-min-microvolt =<800000>;
> + regulator-max-microvolt =<1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt =<800000>;
> + regulator-max-microvolt =<1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "vdd_int";
> + regulator-min-microvolt =<800000>;
> + regulator-max-microvolt =<1400000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "vdd_g3d";
> + regulator-min-microvolt =<800000>;
> + regulator-max-microvolt =<1400000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "vdd_mem";
> + regulator-min-microvolt =<800000>;
> + regulator-max-microvolt =<1400000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "vdd_kfc";
> + regulator-min-microvolt =<800000>;
> + regulator-max-microvolt =<1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck7_reg: BUCK7 {
> + regulator-name = "vdd_1.0v_ldo";
> + regulator-min-microvolt =<800000>;
> + regulator-max-microvolt =<1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck8_reg: BUCK8 {
> + regulator-name = "vdd_1.8v_ldo";
> + regulator-min-microvolt =<800000>;
> + regulator-max-microvolt =<1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck9_reg: BUCK9 {
> + regulator-name = "vdd_2.8v_ldo";
> + regulator-min-microvolt =<3000000>;
> + regulator-max-microvolt =<3750000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck10_reg: BUCK10 {
> + regulator-name = "vdd_vmem";
> + regulator-min-microvolt =<2850000>;
> + regulator-max-microvolt =<2850000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + };
> + };
> + };
> };
just + DT ml.
- Kukjin
next prev parent reply other threads:[~2013-12-09 21:27 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-05 9:44 [PATCH v2] ARM: dts: Add regulator entries to Exynos5420 SMDK board Sachin Kamat
2013-12-09 21:27 ` Kukjin Kim [this message]
2013-12-18 15:18 ` Tomasz Figa
2013-12-18 15:16 ` Tomasz Figa
2013-12-19 4:35 ` Sachin Kamat
2013-12-20 21:10 ` Tomasz Figa
2014-01-03 10:07 ` Sachin Kamat
2014-02-24 0:18 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52A635BF.9030102@samsung.com \
--to=kgene.kim@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=sachin.kamat@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.