All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joonyoung Shim <jy0922.shim@samsung.com>
To: Beomho Seo <beomho.seo@samsung.com>
Cc: "Chris Ball" <cjb@laptop.org>,
	linux-mmc@vger.kernel.org, "Heiko Stübner" <heiko@sntech.de>,
	"Myungjoo Ham" <myungjoo.ham@samsung.com>,
	"Jaehoon Chung" <jh80.chung@samsung.com>
Subject: Re: [PATCH Resend 1/3] mmc: sdhci-s3c: Use mmc_gpio_request_cd function
Date: Tue, 10 Dec 2013 17:43:13 +0900	[thread overview]
Message-ID: <52A6D421.5070806@samsung.com> (raw)
In-Reply-To: <52A6CB57.3080602@samsung.com>

Hi,

On 12/10/2013 05:05 PM, Beomho Seo wrote:
> Hi all,
>
> Didn't have any other comment for this patch?
> If don't have any other comment, I want this patch set is submitted at mmc-next.
> I have tested this patch set on exynos4 board.
>
> CC'd Heiko

Above comments are not suitable for changelog. Please move after the
"---" marker line.

>
> This patch use mmc_gpio_request_cd function.
>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> ---
>   drivers/mmc/host/sdhci-s3c.c |   56 +++++++++++-------------------------------
>   1 file changed, 14 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> index 6debda9..180371a 100644
> --- a/drivers/mmc/host/sdhci-s3c.c
> +++ b/drivers/mmc/host/sdhci-s3c.c
> @@ -27,6 +27,7 @@
>   #include <linux/pm_runtime.h>
>
>   #include <linux/mmc/host.h>
> +#include <linux/mmc/slot-gpio.h>
>
>   #include "sdhci-s3c-regs.h"
>   #include "sdhci.h"
> @@ -400,44 +401,6 @@ static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
>   	}
>   }
>
> -static irqreturn_t sdhci_s3c_gpio_card_detect_thread(int irq, void *dev_id)
> -{
> -	struct sdhci_s3c *sc = dev_id;
> -	int status = gpio_get_value(sc->ext_cd_gpio);
> -	if (sc->pdata->ext_cd_gpio_invert)
> -		status = !status;
> -	sdhci_s3c_notify_change(sc->pdev, status);
> -	return IRQ_HANDLED;
> -}
> -
> -static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
> -{
> -	struct s3c_sdhci_platdata *pdata = sc->pdata;
> -	struct device *dev = &sc->pdev->dev;
> -
> -	if (devm_gpio_request(dev, pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) {
> -		sc->ext_cd_gpio = pdata->ext_cd_gpio;
> -		sc->ext_cd_irq = gpio_to_irq(pdata->ext_cd_gpio);
> -		if (sc->ext_cd_irq &&
> -		    request_threaded_irq(sc->ext_cd_irq, NULL,
> -					 sdhci_s3c_gpio_card_detect_thread,
> -					 IRQF_TRIGGER_RISING |
> -					 IRQF_TRIGGER_FALLING |
> -					 IRQF_ONESHOT,
> -					 dev_name(dev), sc) == 0) {
> -			int status = gpio_get_value(sc->ext_cd_gpio);
> -			if (pdata->ext_cd_gpio_invert)
> -				status = !status;
> -			sdhci_s3c_notify_change(sc->pdev, status);
> -		} else {
> -			dev_warn(dev, "cannot request irq for card detect\n");
> -			sc->ext_cd_irq = 0;
> -		}
> -	} else {
> -		dev_err(dev, "cannot request gpio for card detect\n");
> -	}
> -}
> -
>   #ifdef CONFIG_OF
>   static int sdhci_s3c_parse_dt(struct device *dev,
>   		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
> @@ -699,8 +662,14 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
>   	if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_init)
>   		pdata->ext_cd_init(&sdhci_s3c_notify_change);
>   	if (pdata->cd_type == S3C_SDHCI_CD_GPIO &&
> -	    gpio_is_valid(pdata->ext_cd_gpio))
> -		sdhci_s3c_setup_card_detect_gpio(sc);
> +	    gpio_is_valid(pdata->ext_cd_gpio)) {
> +		ret = mmc_gpio_request_cd(host->mmc, pdata->ext_cd_gpio, 0);
> +		if (ret) {
> +			dev_err(dev,
> +				"failed to reqeust card detect gpio\n");
> +			goto err_req_cd;
> +		}
> +	}
>
>   #ifdef CONFIG_PM_RUNTIME
>   	if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
> @@ -708,6 +677,9 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
>   #endif
>   	return 0;
>
> + err_req_cd:
> +	mmc_gpio_free_cd(host->mmc);

It's wrong to go here when mmc_gpio_request_cd() is failed.

> +
>    err_req_regs:
>   #ifndef CONFIG_PM_RUNTIME
>   	clk_disable_unprepare(sc->clk_bus[sc->cur_clk]);
> @@ -731,8 +703,8 @@ static int sdhci_s3c_remove(struct platform_device *pdev)
>   	if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_cleanup)
>   		pdata->ext_cd_cleanup(&sdhci_s3c_notify_change);
>
> -	if (sc->ext_cd_irq)
> -		free_irq(sc->ext_cd_irq, sc);
> +	if (pdata->ext_cd_gpio)
> +		mmc_gpio_free_cd(host->mmc);
>
>   #ifdef CONFIG_PM_RUNTIME
>   	if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
> -- 1.7.9.5

Thanks.

      reply	other threads:[~2013-12-10  8:43 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-10  8:05 [PATCH Resend 1/3] mmc: sdhci-s3c: Use mmc_gpio_request_cd function Beomho Seo
2013-12-10  8:43 ` Joonyoung Shim [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52A6D421.5070806@samsung.com \
    --to=jy0922.shim@samsung.com \
    --cc=beomho.seo@samsung.com \
    --cc=cjb@laptop.org \
    --cc=heiko@sntech.de \
    --cc=jh80.chung@samsung.com \
    --cc=linux-mmc@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.