From: Oliver Hartkopp <socketcan@hartkopp.net>
To: Wolfgang Grandegger <wg@grandegger.com>
Cc: Austin Schuh <austin@peloton-tech.com>,
Pavel Pisa <pisa@cmp.felk.cvut.cz>,
linux-can@vger.kernel.org
Subject: Re: sja1000 interrupt problem
Date: Wed, 11 Dec 2013 17:59:54 +0100 [thread overview]
Message-ID: <52A89A0A.7010803@hartkopp.net> (raw)
In-Reply-To: <52A783B2.5020002@grandegger.com>
Bad news.
Unfortunately the patch did not have the wanted effect and the interrupt #19
dropped again the late evening.
I'm currently running the setup overnight with the same kernel but only
without -rt to make sure it definitely is a -rt issue.
On 10.12.2013 22:12, Wolfgang Grandegger wrote:
>>
>> for (i = 0; i < channels; i++) {
>> +
>
> Please do not add unrelated changes.
>
Was not intended. I added/removed some code here ...
>
> BTW: while browsing Austin's function trace I realized that we do access
> also the inactive device if interrupts are shared. I think we should use
> a shadow register variable for SJA1000_IR. Hope to find some time over
> the weekend to provide a patch.
??
AFAIK the interrupt is registered in sja1000_open (=> ifconfig up).
So why do we access an inactive (ifconfig down) device then?
Regards,
Oliver
next prev parent reply other threads:[~2013-12-11 16:59 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-08 0:47 sja1000 interrupt problem Austin Schuh
2013-10-08 6:32 ` Wolfgang Grandegger
2013-10-08 6:58 ` Oliver Hartkopp
2013-10-08 18:48 ` Austin Schuh
2013-10-08 19:44 ` Wolfgang Grandegger
2013-10-08 20:47 ` Austin Schuh
2013-10-09 6:21 ` Wolfgang Grandegger
2013-10-09 6:31 ` Wolfgang Grandegger
2013-10-09 6:47 ` Wolfgang Grandegger
[not found] ` <CANGgnMZpPGctUWGcg7Lp-QFPc7d6A5GeL9KQYnpeYMR8WukgdA@mail.gmail.com>
2013-11-07 8:15 ` Wolfgang Grandegger
2013-11-07 23:43 ` Austin Schuh
2013-11-09 14:21 ` Oliver Hartkopp
2013-11-12 2:59 ` Austin Schuh
2013-11-12 21:26 ` Oliver Hartkopp
2013-11-12 23:22 ` Austin Schuh
2013-11-13 3:41 ` Austin Schuh
2013-11-13 6:58 ` Oliver Hartkopp
2013-11-13 9:48 ` Kurt Van Dijck
2013-11-13 6:44 ` Oliver Hartkopp
2013-11-13 8:11 ` Wolfgang Grandegger
2013-11-13 9:08 ` Pavel Pisa
2013-11-13 9:52 ` Wolfgang Grandegger
2013-11-13 18:41 ` Oliver Hartkopp
2013-11-13 19:29 ` Wolfgang Grandegger
2013-11-13 22:00 ` Oliver Hartkopp
2013-11-13 11:02 ` Kurt Van Dijck
2013-11-16 21:42 ` Oliver Hartkopp
2013-11-17 8:18 ` Wolfgang Grandegger
2013-11-17 14:27 ` Oliver Hartkopp
2013-11-17 17:23 ` Wolfgang Grandegger
2013-11-17 20:46 ` Wolfgang Grandegger
2013-11-18 17:08 ` Austin Schuh
2013-12-09 21:54 ` Austin Schuh
2013-12-09 21:54 ` Austin Schuh
2013-12-10 7:49 ` Wolfgang Grandegger
2013-12-10 8:05 ` Austin Schuh
2013-12-10 9:32 ` Wolfgang Grandegger
2013-12-10 13:47 ` Oliver Hartkopp
2013-12-10 14:23 ` Oliver Hartkopp
2013-12-10 14:41 ` Wolfgang Grandegger
2013-12-10 16:05 ` Oliver Hartkopp
2013-12-10 21:12 ` Wolfgang Grandegger
2013-12-11 16:59 ` Oliver Hartkopp [this message]
2013-12-11 19:27 ` Wolfgang Grandegger
2013-12-12 6:13 ` Oliver Hartkopp
2013-12-12 17:38 ` Oliver Hartkopp
2013-12-12 22:56 ` Wolfgang Grandegger
2013-12-13 0:07 ` Austin Schuh
2013-12-13 16:16 ` Oliver Hartkopp
2013-12-13 9:38 ` Oliver Hartkopp
2013-12-13 10:04 ` Wolfgang Grandegger
2013-12-13 10:09 ` Wolfgang Grandegger
2013-12-13 16:25 ` Oliver Hartkopp
2013-12-13 17:33 ` Wolfgang Grandegger
2013-12-13 10:07 ` Marc Kleine-Budde
2013-12-13 16:22 ` Oliver Hartkopp
2013-12-13 17:14 ` Oliver Hartkopp
2013-12-13 21:14 ` Oliver Hartkopp
2013-12-14 9:51 ` Oliver Hartkopp
2013-12-20 23:13 ` Austin Schuh
2013-12-21 8:29 ` Wolfgang Grandegger
2013-12-21 13:12 ` Oliver Hartkopp
2013-12-21 12:55 ` Oliver Hartkopp
2013-12-23 15:58 ` Oliver Hartkopp
2013-11-09 19:42 ` Wolfgang Grandegger
[not found] ` <CANGgnMbb+VResUC6h+cK6Hfe5PLJx9R9ao6bMdJM2e5BPaDamw@mail.gmail.com>
2013-11-12 22:15 ` Wolfgang Grandegger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52A89A0A.7010803@hartkopp.net \
--to=socketcan@hartkopp.net \
--cc=austin@peloton-tech.com \
--cc=linux-can@vger.kernel.org \
--cc=pisa@cmp.felk.cvut.cz \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.