From: Hans Verkuil <hverkuil@xs4all.nl>
To: Antti Palosaari <crope@iki.fi>
Cc: linux-media@vger.kernel.org,
Mauro Carvalho Chehab <m.chehab@samsung.com>
Subject: Re: [PATCH RFC v2 7/7] v4l: define own IOCTL ops for SDR FMT
Date: Mon, 16 Dec 2013 09:54:23 +0100 [thread overview]
Message-ID: <52AEBFBF.7070502@xs4all.nl> (raw)
In-Reply-To: <1387037729-1977-8-git-send-email-crope@iki.fi>
On 12/14/2013 05:15 PM, Antti Palosaari wrote:
> Use own format ops for SDR data:
> vidioc_enum_fmt_sdr_cap
> vidioc_g_fmt_sdr_cap
> vidioc_s_fmt_sdr_cap
> vidioc_try_fmt_sdr_cap
The patch order is a bit weird. I would expect this patch to come before patch 6.
Regards,
Hans
>
> Cc: Hans Verkuil <hverkuil@xs4all.nl>
> Signed-off-by: Antti Palosaari <crope@iki.fi>
> ---
> drivers/media/v4l2-core/v4l2-dev.c | 8 ++++----
> drivers/media/v4l2-core/v4l2-ioctl.c | 18 +++++++++---------
> include/media/v4l2-ioctl.h | 8 ++++++++
> 3 files changed, 21 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/media/v4l2-core/v4l2-dev.c b/drivers/media/v4l2-core/v4l2-dev.c
> index 9f15e25..a84f4ea 100644
> --- a/drivers/media/v4l2-core/v4l2-dev.c
> +++ b/drivers/media/v4l2-core/v4l2-dev.c
> @@ -673,13 +673,13 @@ static void determine_valid_ioctls(struct video_device *vdev)
> SET_VALID_IOCTL(ops, VIDIOC_G_SLICED_VBI_CAP, vidioc_g_sliced_vbi_cap);
> } else if (is_sdr) {
> /* SDR specific ioctls */
> - if (ops->vidioc_enum_fmt_vid_cap)
> + if (ops->vidioc_enum_fmt_sdr_cap)
> set_bit(_IOC_NR(VIDIOC_ENUM_FMT), valid_ioctls);
> - if (ops->vidioc_g_fmt_vid_cap)
> + if (ops->vidioc_g_fmt_sdr_cap)
> set_bit(_IOC_NR(VIDIOC_G_FMT), valid_ioctls);
> - if (ops->vidioc_s_fmt_vid_cap)
> + if (ops->vidioc_s_fmt_sdr_cap)
> set_bit(_IOC_NR(VIDIOC_S_FMT), valid_ioctls);
> - if (ops->vidioc_try_fmt_vid_cap)
> + if (ops->vidioc_try_fmt_sdr_cap)
> set_bit(_IOC_NR(VIDIOC_TRY_FMT), valid_ioctls);
>
> if (is_rx) {
> diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
> index a7e6b52..18aa36a 100644
> --- a/drivers/media/v4l2-core/v4l2-ioctl.c
> +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
> @@ -939,7 +939,7 @@ static int check_fmt(struct file *file, enum v4l2_buf_type type)
> return 0;
> break;
> case V4L2_BUF_TYPE_SDR_CAPTURE:
> - if (is_sdr && is_rx && ops->vidioc_g_fmt_vid_cap)
> + if (is_sdr && is_rx && ops->vidioc_g_fmt_sdr_cap)
> return 0;
> break;
> default:
> @@ -1062,9 +1062,9 @@ static int v4l_enum_fmt(const struct v4l2_ioctl_ops *ops,
> break;
> return ops->vidioc_enum_fmt_vid_out_mplane(file, fh, arg);
> case V4L2_BUF_TYPE_SDR_CAPTURE:
> - if (unlikely(!is_rx || !ops->vidioc_enum_fmt_vid_cap))
> + if (unlikely(!is_rx || !ops->vidioc_enum_fmt_sdr_cap))
> break;
> - return ops->vidioc_enum_fmt_vid_cap(file, fh, arg);
> + return ops->vidioc_enum_fmt_sdr_cap(file, fh, arg);
> }
> return -EINVAL;
> }
> @@ -1121,9 +1121,9 @@ static int v4l_g_fmt(const struct v4l2_ioctl_ops *ops,
> break;
> return ops->vidioc_g_fmt_sliced_vbi_out(file, fh, arg);
> case V4L2_BUF_TYPE_SDR_CAPTURE:
> - if (unlikely(!is_rx || !is_sdr || !ops->vidioc_g_fmt_vid_cap))
> + if (unlikely(!is_rx || !is_sdr || !ops->vidioc_g_fmt_sdr_cap))
> break;
> - return ops->vidioc_g_fmt_vid_cap(file, fh, arg);
> + return ops->vidioc_g_fmt_sdr_cap(file, fh, arg);
> }
> return -EINVAL;
> }
> @@ -1190,10 +1190,10 @@ static int v4l_s_fmt(const struct v4l2_ioctl_ops *ops,
> CLEAR_AFTER_FIELD(p, fmt.sliced);
> return ops->vidioc_s_fmt_sliced_vbi_out(file, fh, arg);
> case V4L2_BUF_TYPE_SDR_CAPTURE:
> - if (unlikely(!is_rx || !is_sdr || !ops->vidioc_s_fmt_vid_cap))
> + if (unlikely(!is_rx || !is_sdr || !ops->vidioc_s_fmt_sdr_cap))
> break;
> CLEAR_AFTER_FIELD(p, fmt.sdr);
> - return ops->vidioc_s_fmt_vid_cap(file, fh, arg);
> + return ops->vidioc_s_fmt_sdr_cap(file, fh, arg);
> }
> return -EINVAL;
> }
> @@ -1260,10 +1260,10 @@ static int v4l_try_fmt(const struct v4l2_ioctl_ops *ops,
> CLEAR_AFTER_FIELD(p, fmt.sliced);
> return ops->vidioc_try_fmt_sliced_vbi_out(file, fh, arg);
> case V4L2_BUF_TYPE_SDR_CAPTURE:
> - if (unlikely(!is_rx || !is_sdr || !ops->vidioc_try_fmt_vid_cap))
> + if (unlikely(!is_rx || !is_sdr || !ops->vidioc_try_fmt_sdr_cap))
> break;
> CLEAR_AFTER_FIELD(p, fmt.sdr);
> - return ops->vidioc_try_fmt_vid_cap(file, fh, arg);
> + return ops->vidioc_try_fmt_sdr_cap(file, fh, arg);
> }
> return -EINVAL;
> }
> diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
> index e0b74a4..8be32f5 100644
> --- a/include/media/v4l2-ioctl.h
> +++ b/include/media/v4l2-ioctl.h
> @@ -40,6 +40,8 @@ struct v4l2_ioctl_ops {
> struct v4l2_fmtdesc *f);
> int (*vidioc_enum_fmt_vid_out_mplane)(struct file *file, void *fh,
> struct v4l2_fmtdesc *f);
> + int (*vidioc_enum_fmt_sdr_cap) (struct file *file, void *fh,
> + struct v4l2_fmtdesc *f);
>
> /* VIDIOC_G_FMT handlers */
> int (*vidioc_g_fmt_vid_cap) (struct file *file, void *fh,
> @@ -62,6 +64,8 @@ struct v4l2_ioctl_ops {
> struct v4l2_format *f);
> int (*vidioc_g_fmt_vid_out_mplane)(struct file *file, void *fh,
> struct v4l2_format *f);
> + int (*vidioc_g_fmt_sdr_cap) (struct file *file, void *fh,
> + struct v4l2_format *f);
>
> /* VIDIOC_S_FMT handlers */
> int (*vidioc_s_fmt_vid_cap) (struct file *file, void *fh,
> @@ -84,6 +88,8 @@ struct v4l2_ioctl_ops {
> struct v4l2_format *f);
> int (*vidioc_s_fmt_vid_out_mplane)(struct file *file, void *fh,
> struct v4l2_format *f);
> + int (*vidioc_s_fmt_sdr_cap) (struct file *file, void *fh,
> + struct v4l2_format *f);
>
> /* VIDIOC_TRY_FMT handlers */
> int (*vidioc_try_fmt_vid_cap) (struct file *file, void *fh,
> @@ -106,6 +112,8 @@ struct v4l2_ioctl_ops {
> struct v4l2_format *f);
> int (*vidioc_try_fmt_vid_out_mplane)(struct file *file, void *fh,
> struct v4l2_format *f);
> + int (*vidioc_try_fmt_sdr_cap) (struct file *file, void *fh,
> + struct v4l2_format *f);
>
> /* Buffer handlers */
> int (*vidioc_reqbufs) (struct file *file, void *fh, struct v4l2_requestbuffers *b);
>
next prev parent reply other threads:[~2013-12-16 8:54 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-14 16:15 [PATCH RFC v2 0/7] V4L2 SDR API Antti Palosaari
2013-12-14 16:15 ` [PATCH RFC v2 1/7] v4l: don't clear VIDIOC_G_FREQUENCY tuner type Antti Palosaari
2013-12-14 16:15 ` [PATCH RFC v2 2/7] v4l: add device type for Software Defined Radio Antti Palosaari
2013-12-14 16:15 ` [PATCH RFC v2 3/7] v4l: add new tuner types for SDR Antti Palosaari
2013-12-16 8:53 ` Hans Verkuil
2013-12-16 12:36 ` Antti Palosaari
2013-12-16 12:50 ` Hans Verkuil
2013-12-16 14:19 ` Antti Palosaari
2013-12-16 14:25 ` Hans Verkuil
2013-12-16 14:41 ` Antti Palosaari
2013-12-16 14:57 ` Hans Verkuil
2013-12-14 16:15 ` [PATCH RFC v2 4/7] v4l: 1 Hz resolution flag for tuners Antti Palosaari
2013-12-14 16:15 ` [PATCH RFC v2 5/7] v4l: add stream format for SDR receiver Antti Palosaari
2013-12-14 16:15 ` [PATCH RFC v2 6/7] v4l: enable some IOCTLs " Antti Palosaari
2013-12-14 16:15 ` [PATCH RFC v2 7/7] v4l: define own IOCTL ops for SDR FMT Antti Palosaari
2013-12-14 16:24 ` Antti Palosaari
2013-12-15 11:23 ` Mauro Carvalho Chehab
2013-12-15 11:31 ` Hans Verkuil
2013-12-16 8:54 ` Hans Verkuil [this message]
2013-12-14 16:45 ` [PATCH RFC v2 0/7] V4L2 SDR API Antti Palosaari
2013-12-14 17:05 ` Hans Verkuil
2013-12-14 17:47 ` Antti Palosaari
2013-12-15 11:30 ` Mauro Carvalho Chehab
2013-12-16 16:50 ` Antti Palosaari
2013-12-16 17:09 ` Hans Verkuil
2013-12-16 8:55 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52AEBFBF.7070502@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=m.chehab@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.