From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
To: Vince Bridgers <vbridgers2013@gmail.com>,
Rayagond K <rayagond@vayavyalabs.com>
Cc: <netdev@vger.kernel.org>
Subject: Re: [PATCH net] drivers : stmmac : Fixes for IEEE 1588 Timestamping
Date: Thu, 19 Dec 2013 12:50:50 +0100 [thread overview]
Message-ID: <52B2DD9A.50003@st.com> (raw)
In-Reply-To: <CAOwfj2Muc4szDNiJc5SjXsw4Oy_LkrBJeiDUY7-09N=paCSSKg@mail.gmail.com>
On 12/19/2013 12:35 AM, Vince Bridgers wrote:
> >From e9278f13a922433adbf3a81ef9d7823a99bd8d88 Mon Sep 17 00:00:00 2001
> From: Vince Bridgers <vbridger2013@gmail.com>
> Date: Wed, 18 Dec 2013 14:29:26 -0600
> Subject: [PATCH 1/1] Fix release of incorrect spinlock in
> stmmac_ptp.c, and
> masked configuration of control variable adv_ts
>
> Two issues addressed with this patch:
> 1) The functions stmmac_adjust_freq and stmmac_adjust_time were
> releasing the incorrect spinlock
> at the end of the function - priv->lock instead of priv->ptp_lock.
> 2) Setting the control data variable priv->adv_ts according to
> hardware capabilities was masked
> by message level settings, so it was not being set correctly in the
> case that the Synopsys
> MAC only supported advanced timestamping.
>
> Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Hello Vince
thanks for the patch that provides useful fixes. Pls can you check if it
applies
fine on net.git master branch? It failed on my side.
peppe
> ---
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 20
> +++++++++-----------
> drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 4 ++--
> 2 files changed, 11 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 8a7a23a..797b56a 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -622,17 +622,15 @@ static int stmmac_init_ptp(struct stmmac_priv *priv)
> if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
> return -EOPNOTSUPP;
>
> - if (netif_msg_hw(priv)) {
> - if (priv->dma_cap.time_stamp) {
> - pr_debug("IEEE 1588-2002 Time Stamp supported\n");
> - priv->adv_ts = 0;
> - }
> - if (priv->dma_cap.atime_stamp && priv->extend_desc) {
> - pr_debug
> - ("IEEE 1588-2008 Advanced Time Stamp supported\n");
> - priv->adv_ts = 1;
> - }
> - }
> + priv->adv_ts = 0;
> + if (priv->dma_cap.atime_stamp && priv->extend_desc)
> + priv->adv_ts = 1;
> +
> + if (netif_msg_hw(priv) && priv->dma_cap.time_stamp)
> + pr_debug("IEEE 1588-2002 Time Stamp supported\n");
> +
> + if (netif_msg_hw(priv) && priv->adv_ts)
> + pr_debug("IEEE 1588-2008 Advanced Time Stamp supported\n");
>
> priv->hw->ptp = &stmmac_ptp;
> priv->hwts_tx_en = 0;
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> index b8b0eee..7680581 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> @@ -56,7 +56,7 @@ static int stmmac_adjust_freq(struct ptp_clock_info
> *ptp, s32 ppb)
>
> priv->hw->ptp->config_addend(priv->ioaddr, addend);
>
> - spin_unlock_irqrestore(&priv->lock, flags);
> + spin_unlock_irqrestore(&priv->ptp_lock, flags);
>
> return 0;
> }
> @@ -91,7 +91,7 @@ static int stmmac_adjust_time(struct ptp_clock_info
> *ptp, s64 delta)
>
> priv->hw->ptp->adjust_systime(priv->ioaddr, sec, nsec, neg_adj);
>
> - spin_unlock_irqrestore(&priv->lock, flags);
> + spin_unlock_irqrestore(&priv->ptp_lock, flags);
>
> return 0;
> }
>
next prev parent reply other threads:[~2013-12-19 11:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-18 23:35 [PATCH net] drivers : stmmac : Fixes for IEEE 1588 Timestamping Vince Bridgers
2013-12-19 11:50 ` Giuseppe CAVALLARO [this message]
2013-12-22 23:46 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52B2DD9A.50003@st.com \
--to=peppe.cavallaro@st.com \
--cc=netdev@vger.kernel.org \
--cc=rayagond@vayavyalabs.com \
--cc=vbridgers2013@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.