* [PATCH] spi/atmel: document clock properties
@ 2013-12-17 11:01 ` Boris BREZILLON
0 siblings, 0 replies; 6+ messages in thread
From: Boris BREZILLON @ 2013-12-17 11:01 UTC (permalink / raw)
To: linux-arm-kernel
Document the clock properties required by the spi-atmel driver.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
---
.../devicetree/bindings/spi/spi_atmel.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
index 07e04cd..4f8184d 100644
--- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
+++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
@@ -5,6 +5,9 @@ Required properties:
- reg: Address and length of the register set for the device
- interrupts: Should contain spi interrupt
- cs-gpios: chipselects
+- clock-names: tuple listing input clock names.
+ Required elements: "spi_clk"
+- clocks: phandles to input clocks.
Example:
@@ -14,6 +17,8 @@ spi1: spi at fffcc000 {
interrupts = <13 4 5>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
cs-gpios = <&pioB 3 0>;
status = "okay";
--
1.7.9.5
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH] spi/atmel: document clock properties
@ 2013-12-17 11:01 ` Boris BREZILLON
0 siblings, 0 replies; 6+ messages in thread
From: Boris BREZILLON @ 2013-12-17 11:01 UTC (permalink / raw)
To: Rob Landley, Nicolas Ferre, Jean-Christophe PLAGNIOL-VILLARD,
Grant Likely
Cc: devicetree, linux-doc, linux-kernel, linux-arm-kernel,
Boris BREZILLON
Document the clock properties required by the spi-atmel driver.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
---
.../devicetree/bindings/spi/spi_atmel.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
index 07e04cd..4f8184d 100644
--- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
+++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
@@ -5,6 +5,9 @@ Required properties:
- reg: Address and length of the register set for the device
- interrupts: Should contain spi interrupt
- cs-gpios: chipselects
+- clock-names: tuple listing input clock names.
+ Required elements: "spi_clk"
+- clocks: phandles to input clocks.
Example:
@@ -14,6 +17,8 @@ spi1: spi@fffcc000 {
interrupts = <13 4 5>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
cs-gpios = <&pioB 3 0>;
status = "okay";
--
1.7.9.5
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH] spi/atmel: document clock properties
@ 2013-12-17 11:01 ` Boris BREZILLON
0 siblings, 0 replies; 6+ messages in thread
From: Boris BREZILLON @ 2013-12-17 11:01 UTC (permalink / raw)
To: Rob Landley, Nicolas Ferre, Jean-Christophe PLAGNIOL-VILLARD,
Grant Likely
Cc: devicetree, Boris BREZILLON, linux-kernel, linux-arm-kernel,
linux-doc
Document the clock properties required by the spi-atmel driver.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
---
.../devicetree/bindings/spi/spi_atmel.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
index 07e04cd..4f8184d 100644
--- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
+++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
@@ -5,6 +5,9 @@ Required properties:
- reg: Address and length of the register set for the device
- interrupts: Should contain spi interrupt
- cs-gpios: chipselects
+- clock-names: tuple listing input clock names.
+ Required elements: "spi_clk"
+- clocks: phandles to input clocks.
Example:
@@ -14,6 +17,8 @@ spi1: spi@fffcc000 {
interrupts = <13 4 5>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
cs-gpios = <&pioB 3 0>;
status = "okay";
--
1.7.9.5
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH] spi/atmel: document clock properties
2013-12-17 11:01 ` Boris BREZILLON
(?)
@ 2013-12-19 15:53 ` Nicolas Ferre
-1 siblings, 0 replies; 6+ messages in thread
From: Nicolas Ferre @ 2013-12-19 15:53 UTC (permalink / raw)
To: linux-arm-kernel
On 17/12/2013 12:01, Boris BREZILLON :
> Document the clock properties required by the spi-atmel driver.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> .../devicetree/bindings/spi/spi_atmel.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
> index 07e04cd..4f8184d 100644
> --- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
> +++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
> @@ -5,6 +5,9 @@ Required properties:
> - reg: Address and length of the register set for the device
> - interrupts: Should contain spi interrupt
> - cs-gpios: chipselects
> +- clock-names: tuple listing input clock names.
> + Required elements: "spi_clk"
> +- clocks: phandles to input clocks.
>
> Example:
>
> @@ -14,6 +17,8 @@ spi1: spi at fffcc000 {
> interrupts = <13 4 5>;
> #address-cells = <1>;
> #size-cells = <0>;
> + clocks = <&spi1_clk>;
> + clock-names = "spi_clk";
> cs-gpios = <&pioB 3 0>;
> status = "okay";
>
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] spi/atmel: document clock properties
@ 2013-12-19 15:53 ` Nicolas Ferre
0 siblings, 0 replies; 6+ messages in thread
From: Nicolas Ferre @ 2013-12-19 15:53 UTC (permalink / raw)
To: Boris BREZILLON, Rob Landley, Jean-Christophe PLAGNIOL-VILLARD,
Mark Brown
Cc: Grant Likely, devicetree, linux-doc, linux-kernel,
linux-arm-kernel
On 17/12/2013 12:01, Boris BREZILLON :
> Document the clock properties required by the spi-atmel driver.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> .../devicetree/bindings/spi/spi_atmel.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
> index 07e04cd..4f8184d 100644
> --- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
> +++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
> @@ -5,6 +5,9 @@ Required properties:
> - reg: Address and length of the register set for the device
> - interrupts: Should contain spi interrupt
> - cs-gpios: chipselects
> +- clock-names: tuple listing input clock names.
> + Required elements: "spi_clk"
> +- clocks: phandles to input clocks.
>
> Example:
>
> @@ -14,6 +17,8 @@ spi1: spi@fffcc000 {
> interrupts = <13 4 5>;
> #address-cells = <1>;
> #size-cells = <0>;
> + clocks = <&spi1_clk>;
> + clock-names = "spi_clk";
> cs-gpios = <&pioB 3 0>;
> status = "okay";
>
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] spi/atmel: document clock properties
@ 2013-12-19 15:53 ` Nicolas Ferre
0 siblings, 0 replies; 6+ messages in thread
From: Nicolas Ferre @ 2013-12-19 15:53 UTC (permalink / raw)
To: Boris BREZILLON, Rob Landley, Jean-Christophe PLAGNIOL-VILLARD,
Mark Brown
Cc: Grant Likely, devicetree, linux-doc, linux-kernel,
linux-arm-kernel
On 17/12/2013 12:01, Boris BREZILLON :
> Document the clock properties required by the spi-atmel driver.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> .../devicetree/bindings/spi/spi_atmel.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
> index 07e04cd..4f8184d 100644
> --- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
> +++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
> @@ -5,6 +5,9 @@ Required properties:
> - reg: Address and length of the register set for the device
> - interrupts: Should contain spi interrupt
> - cs-gpios: chipselects
> +- clock-names: tuple listing input clock names.
> + Required elements: "spi_clk"
> +- clocks: phandles to input clocks.
>
> Example:
>
> @@ -14,6 +17,8 @@ spi1: spi@fffcc000 {
> interrupts = <13 4 5>;
> #address-cells = <1>;
> #size-cells = <0>;
> + clocks = <&spi1_clk>;
> + clock-names = "spi_clk";
> cs-gpios = <&pioB 3 0>;
> status = "okay";
>
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-12-19 15:53 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-17 11:01 [PATCH] spi/atmel: document clock properties Boris BREZILLON
2013-12-17 11:01 ` Boris BREZILLON
2013-12-17 11:01 ` Boris BREZILLON
2013-12-19 15:53 ` Nicolas Ferre
2013-12-19 15:53 ` Nicolas Ferre
2013-12-19 15:53 ` Nicolas Ferre
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.