From: Minkyu Kang <mk7.kang@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 00/11 V13] EXYNOS5420: Add SMDK5420 board support
Date: Tue, 31 Dec 2013 16:34:11 +0900 [thread overview]
Message-ID: <52C27373.3070007@samsung.com> (raw)
In-Reply-To: <1388031267-3893-1-git-send-email-rajeshwari.s@samsung.com>
On 26/12/13 13:14, Rajeshwari S Shinde wrote:
> This patch adds basic board support for SMDK5420 board.
> These patches are tested for booting fine on EVT1 SMDK5420.
>
> Rajeshwari S Shinde (11):
> EXYNOS5: Create a common board file
> Exynos5420: Add base addresses for 5420
> EXYNOS5420: Add power register structure.
> EXYNOS5420: Add dmc and phy_control register structure
> Exynos5420: Add clock initialization for 5420
> Exynos5420: Add DDR3 initialization for 5420
> Exynos5420: Add support for 5420 in pinmux and gpio
> Exynos5420: Add base patch for SMDK5420
> DTS: Add dts support for SMDK5420
> Config: Add initial config for SMDK5420
> SPL: EXYNOS: Prepare for variable size SPL support
>
> arch/arm/cpu/armv7/exynos/clock.c | 279 ++++++++-
> arch/arm/cpu/armv7/exynos/clock_init.h | 17 +
> arch/arm/cpu/armv7/exynos/clock_init_exynos5.c | 352 ++++++++++-
> arch/arm/cpu/armv7/exynos/dmc_common.c | 60 +-
> arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c | 439 ++++++++++++-
> arch/arm/cpu/armv7/exynos/exynos5_setup.h | 764 ++++++++++++++++------
> arch/arm/cpu/armv7/exynos/pinmux.c | 260 +++++++-
> arch/arm/dts/exynos5.dtsi | 198 ++++++
> arch/arm/dts/exynos5250.dtsi | 194 +-----
> arch/arm/dts/exynos5420.dtsi | 70 +++
> arch/arm/include/asm/arch-exynos/board.h | 17 +
> arch/arm/include/asm/arch-exynos/clk.h | 1 +
> arch/arm/include/asm/arch-exynos/clock.h | 494 +++++++++++++++
> arch/arm/include/asm/arch-exynos/cpu.h | 52 +-
> arch/arm/include/asm/arch-exynos/dmc.h | 177 ++++++
> arch/arm/include/asm/arch-exynos/gpio.h | 143 ++++-
> arch/arm/include/asm/arch-exynos/periph.h | 3 +
> arch/arm/include/asm/arch-exynos/power.h | 837 +++++++++++++++++++++++++
> board/samsung/common/Makefile | 4 +
> board/samsung/common/board.c | 408 ++++++++++++
> board/samsung/dts/exynos5420-smdk5420.dts | 169 +++++
> board/samsung/smdk5250/exynos5-dt.c | 350 +----------
> board/samsung/smdk5250/smdk5250.c | 182 +-----
> board/samsung/smdk5420/Makefile | 11 +
> board/samsung/smdk5420/smdk5420.c | 159 +++++
> board/samsung/smdk5420/smdk5420_spl.c | 52 ++
> boards.cfg | 1 +
> include/configs/arndale.h | 1 +
> include/configs/exynos5-dt.h | 290 +++++++++
> include/configs/exynos5250-dt.h | 284 +--------
> include/configs/smdk5420.h | 56 ++
> spl/Makefile | 7 +-
> tools/Makefile | 3 +-
> tools/mkexynosspl.c | 167 +++--
> 34 files changed, 5187 insertions(+), 1314 deletions(-)
> create mode 100644 arch/arm/dts/exynos5.dtsi
> create mode 100644 arch/arm/dts/exynos5420.dtsi
> create mode 100644 arch/arm/include/asm/arch-exynos/board.h
> create mode 100644 board/samsung/common/board.c
> create mode 100644 board/samsung/dts/exynos5420-smdk5420.dts
> create mode 100644 board/samsung/smdk5420/Makefile
> create mode 100644 board/samsung/smdk5420/smdk5420.c
> create mode 100644 board/samsung/smdk5420/smdk5420_spl.c
> create mode 100644 include/configs/exynos5-dt.h
> create mode 100644 include/configs/smdk5420.h
>
applied to u-boot-samsung.
Thanks,
Minkyu Kang.
next prev parent reply other threads:[~2013-12-31 7:34 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-26 4:14 [U-Boot] [PATCH 00/11 V13] EXYNOS5420: Add SMDK5420 board support Rajeshwari S Shinde
2013-12-26 4:14 ` [U-Boot] [PATCH 01/11 V13] EXYNOS5: Create a common board file Rajeshwari S Shinde
2013-12-26 4:14 ` [U-Boot] [PATCH 02/11 V13] Exynos5420: Add base addresses for 5420 Rajeshwari S Shinde
2013-12-26 4:14 ` [U-Boot] [PATCH 03/11 V13] EXYNOS5420: Add power register structure Rajeshwari S Shinde
2013-12-26 4:14 ` [U-Boot] [PATCH 04/11] EXYNOS5420: Add dmc and phy_control " Rajeshwari S Shinde
2013-12-26 4:14 ` [U-Boot] [PATCH 05/11 V13] Exynos5420: Add clock initialization for 5420 Rajeshwari S Shinde
2013-12-26 4:14 ` [U-Boot] [PATCH 06/11 V13] Exynos5420: Add DDR3 " Rajeshwari S Shinde
2013-12-26 4:14 ` [U-Boot] [PATCH 07/11 V13] Exynos5420: Add support for 5420 in pinmux and gpio Rajeshwari S Shinde
2013-12-26 4:14 ` [U-Boot] [PATCH 08/11 V13] Exynos5420: Add base patch for SMDK5420 Rajeshwari S Shinde
2013-12-26 4:14 ` [U-Boot] [PATCH 09/11 V13] DTS: Add dts support " Rajeshwari S Shinde
2013-12-26 4:14 ` [U-Boot] [PATCH 10/11 V13] Config: Add initial config " Rajeshwari S Shinde
2013-12-26 4:14 ` [U-Boot] [PATCH 11/11 V13] SPL: EXYNOS: Prepare for variable size SPL support Rajeshwari S Shinde
2013-12-31 7:34 ` Minkyu Kang [this message]
2014-01-08 17:37 ` [U-Boot] [PATCH 00/11 V13] EXYNOS5420: Add SMDK5420 board support Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52C27373.3070007@samsung.com \
--to=mk7.kang@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.