From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Tue, 07 Jan 2014 13:25:22 +0100 Subject: [U-Boot] [PATCH v2 1/3] mx6: clock: Pass the frequency as argument of enable_fec_anatop_clock() In-Reply-To: References: <1388771759-27052-1-git-send-email-festevam@gmail.com> Message-ID: <52CBF232.1060804@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Fabio, On 06/01/2014 14:12, Fabio Estevam wrote: > Hi Stefano, > > On Fri, Jan 3, 2014 at 3:55 PM, Fabio Estevam wrote: >> From: Fabio Estevam >> >> Provide an argument to enable_fec_anatop_clock() to specify the clock frequency >> that will be generated. >> >> No changes are made to mx6slevk, which uses the default 50MHz fec clock. >> >> Signed-off-by: Fabio Estevam >> --- >> Stefano, >> >> I don't have access to a mx6slevk board at the moment, but will test it on >> Monday. Wanted to submit it so that people could provide some feedback on the >> series. >> >> mx6slevk is using the default clock of 50MHz, so I kept it unchanged. > > Just tested on a mx6slevk and confirmed that FEC is functional after this patch. > Thanks for testing - patch is ok for me. Acked-by: Stefano Babic Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================