From: Oleksij Rempel <linux@rempel-privat.de>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] ath: phy0: unsupported hw bitrate detected 0x1b using 1 Mbit
Date: Tue, 07 Jan 2014 21:50:30 +0100 [thread overview]
Message-ID: <52CC6896.1090909@rempel-privat.de> (raw)
In-Reply-To: <21196.10937.962241.311049@gargle.gargle.HOWL>
Am 07.01.2014 17:26, schrieb Sujith Manoharan:
> Oleksij Rempel wrote:
>>> Does this happen a lot ?
>>
>> It depends on how intensively WiFi is used.
>>
>> See attachment
>>
>> [ 657.383048] ath: phy0: unsupported hw bitrate detected 0x1b using 1 Mbit
>> [ 657.703201] ath: phy0: unsupported hw bitrate detected 0x1b using 1 Mbit
>
> Can you load the driver with debug=0x200 (with latest wireless-testing) and
> post the kernel log when the issue happens ?
looks like happens at scan time:
[ 3161.475583] ath: phy3: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 3161.540259] ath: phy3: Set channel: 5180 MHz width: 2
[ 3161.540394] ath: phy3: unsupported hw bitrate detected 0x1b using 1 Mbit
[ 3161.540414] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3161.744603] ath: phy3: Set channel: 2447 MHz width: 0
[ 3161.744748] ath: phy3: Reset to 2447 MHz, HT40: 0 fastcc: 1
some time there are some BB_WATCHDOG warning too.
--
Regards,
Oleksij
-------------- next part --------------
[ 5.577791] rts51x: Close SSC clock power!
[ 5.648987] init: isc-dhcp-server main process (2022) terminated with status 1
[ 5.649023] init: isc-dhcp-server main process ended, respawning
[ 5.782881] init: isc-dhcp-server main process (2112) terminated with status 1
[ 5.782908] init: isc-dhcp-server main process ended, respawning
[ 5.896407] init: isc-dhcp-server main process (2142) terminated with status 1
[ 5.896442] init: isc-dhcp-server main process ended, respawning
[ 5.936332] init: isc-dhcp-server main process (2156) terminated with status 1
[ 5.936370] init: isc-dhcp-server main process ended, respawning
[ 5.969240] init: isc-dhcp-server main process (2165) terminated with status 1
[ 5.969266] init: isc-dhcp-server main process ended, respawning
[ 6.008114] init: isc-dhcp-server main process (2173) terminated with status 1
[ 6.008148] init: isc-dhcp-server main process ended, respawning
[ 6.049715] init: isc-dhcp-server main process (2181) terminated with status 1
[ 6.049765] init: isc-dhcp-server main process ended, respawning
[ 6.095112] init: isc-dhcp-server main process (2201) terminated with status 1
[ 6.095142] init: isc-dhcp-server main process ended, respawning
[ 6.127084] init: isc-dhcp-server main process (2234) terminated with status 1
[ 6.127117] init: isc-dhcp-server main process ended, respawning
[ 6.158261] init: isc-dhcp-server main process (2246) terminated with status 1
[ 6.158306] init: isc-dhcp-server main process ended, respawning
[ 6.205178] init: isc-dhcp-server main process (2254) terminated with status 1
[ 6.205212] init: isc-dhcp-server respawning too fast, stopped
[ 7.966088] audit_printk_skb: 153 callbacks suppressed
[ 7.966094] type=1400 audit(1389124263.375:62): apparmor="DENIED" operation="mkdir" profile="/usr/lib/telepathy/mission-control-5" name="/var/lib/lightdm/.config/libaccounts-glib/" pid=2766 comm="mission-control" requested_mask="c" denied_mask="c" fsuid=110 ouid=110
[ 7.969185] type=1400 audit(1389124263.378:63): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/var/lib/lightdm/.config/dconf/user" pid=2766 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=110 ouid=110
[ 8.021226] type=1400 audit(1389124263.430:64): apparmor="DENIED" operation="mkdir" profile="/usr/lib/telepathy/mission-control-5" name="/var/lib/lightdm/.local/share/telepathy/" pid=2766 comm="mission-control" requested_mask="c" denied_mask="c" fsuid=110 ouid=110
[ 8.022570] type=1400 audit(1389124263.431:65): apparmor="DENIED" operation="mkdir" profile="/usr/lib/telepathy/mission-control-5" name="/var/lib/lightdm/.local/share/telepathy/" pid=2766 comm="mission-control" requested_mask="c" denied_mask="c" fsuid=110 ouid=110
[ 8.138552] rts51x: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[ 8.138559] rts51x: [rts51x_scsi.c][allow_medium_removal]:[564]
[ 8.138643] rts51x: Command (unknown command) (16 bytes)
[ 8.138645] rts51x:
[ 8.138646] 85 08
[ 8.138649] 0e 00
[ 8.138651] 00 00
[ 8.138652] 01 00
[ 8.138654] 00 00
[ 8.138656] 00 00
[ 8.138658] 00 40
[ 8.138659] ec 00
[ 8.138661]
[ 8.254010] tun: Universal TUN/TAP device driver, 1.6
[ 8.254014] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 8.257802] IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready
[ 8.294537] init: plymouth-stop pre-start process (2881) terminated with status 1
[ 11.893301] wlan11: authenticate with 90:f6:52:ff:d3:85
[ 11.903346] wlan11: send auth to 90:f6:52:ff:d3:85 (try 1/3)
[ 11.905651] wlan11: authenticated
[ 11.906659] wlan11: associate with 90:f6:52:ff:d3:85 (try 1/3)
[ 11.910414] wlan11: RX AssocResp from 90:f6:52:ff:d3:85 (capab=0x431 status=0 aid=4)
[ 11.910456] wlan11: associated
[ 11.910465] IPv6: ADDRCONF(NETDEV_CHANGE): wlan11: link becomes ready
[ 11.910817] cfg80211: Calling CRDA for country: DE
[ 11.913357] ath: EEPROM regdomain: 0x8114
[ 11.913359] ath: EEPROM indicates we should expect a country code
[ 11.913360] ath: doing EEPROM country->regdmn map search
[ 11.913362] ath: country maps to regdmn code: 0x37
[ 11.913363] ath: Country alpha2 being used: DE
[ 11.913364] ath: Regpair used: 0x37
[ 11.913365] ath: regdomain 0x8114 dynamically updated by country IE
[ 11.913393] cfg80211: Regulatory domain changed to country: DE
[ 11.913394] cfg80211: DFS Master region: unset
[ 11.913396] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.913397] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 11.913399] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 11.913400] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 11.913401] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 11.913403] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 30.016989] ath: phy0: BB_WATCHDOG: Skipping interrupts
[ 136.066007] ath: phy0: BB_WATCHDOG: Skipping interrupts
[ 202.124425] wlan11: deauthenticating from 90:f6:52:ff:d3:85 by local choice (reason=3)
[ 202.145572] cfg80211: Calling CRDA to update world regulatory domain
[ 202.150962] cfg80211: World regulatory domain updated:
[ 202.150966] cfg80211: DFS Master region: unset
[ 202.150968] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 202.150972] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 202.150974] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 202.150977] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 202.150979] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 202.150981] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 202.157998] ath9k: ath9k: Driver unloaded
[ 217.909700] ath: phy1: Eeprom VER: 2, REV: 0
[ 217.910976] ath: phy1: TX streams 2, RX streams: 2
[ 217.910978] ath: phy1: TX streams 2, RX streams: 2
[ 217.910979] ath: EEPROM regdomain: 0x6c
[ 217.910980] ath: EEPROM indicates we should expect a direct regpair map
[ 217.910982] ath: Country alpha2 being used: 00
[ 217.910983] ath: Regpair used: 0x6c
[ 217.910988] ath: phy1: tx DMA: 512 buffers 1 desc/buf
[ 217.910996] ath: phy1: tx DMA map: ffff880090f50000 (65536) -> 90f50000 (65536)
[ 217.911008] ath: phy1: beacon DMA: 8 buffers 1 desc/buf
[ 217.911011] ath: phy1: beacon DMA map: ffff880090eb2000 (1024) -> 90eb2000 (1024)
[ 217.911509] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 217.911958] ieee80211 phy1: Atheros AR9462 Rev:2 mem=0xffffc9000cc80000, irq=17
[ 217.920369] systemd-udevd[4296]: renamed network interface wlan0 to wlan11
[ 217.921970] ath: phy1: Starting driver with initial channel: 2412 MHz
[ 217.927890] ath: phy1: Attach a VIF of type: 2
[ 217.927937] ath: phy1: Configure tx [queue/halq] [0/0], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 217.927945] ath: phy1: Configure tx [queue/halq] [1/1], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 217.927952] ath: phy1: Configure tx [queue/halq] [2/2], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 217.927958] ath: phy1: Configure tx [queue/halq] [3/3], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 217.927968] ath: phy1: Monitor mode is disabled
[ 217.927970] ath: phy1: Set channel: 2412 MHz width: 0
[ 217.928147] ath: phy1: Reset to 2412 MHz, HT40: 0 fastcc: 0
[ 217.934106] ath: phy1: Set power: 16
[ 217.934155] ath: phy1: Set HW RX filter: 0x207
[ 217.934163] ath: phy1: Set HW RX filter: 0x207
[ 217.934224] IPv6: ADDRCONF(NETDEV_UP): wlan11: link is not ready
[ 217.934228] ath: phy1: Set HW RX filter: 0x207
[ 217.952751] ath: phy1: Set HW RX filter: 0x17
[ 217.952762] ath: phy1: Set channel: 2412 MHz width: 0
[ 217.952903] ath: phy1: Reset to 2412 MHz, HT40: 0 fastcc: 0
[ 218.016824] ath: phy1: Set channel: 2417 MHz width: 0
[ 218.016970] ath: phy1: Reset to 2417 MHz, HT40: 0 fastcc: 1
[ 218.017889] ath: phy1: Set power: 17
[ 218.077850] ath: phy1: Set channel: 2422 MHz width: 0
[ 218.077999] ath: phy1: Reset to 2422 MHz, HT40: 0 fastcc: 1
[ 218.138935] ath: phy1: Set channel: 2427 MHz width: 0
[ 218.139083] ath: phy1: Reset to 2427 MHz, HT40: 0 fastcc: 1
[ 218.199879] ath: phy1: Set channel: 2432 MHz width: 0
[ 218.200035] ath: phy1: Reset to 2432 MHz, HT40: 0 fastcc: 1
[ 218.260942] ath: phy1: Set channel: 2437 MHz width: 0
[ 218.261090] ath: phy1: Reset to 2437 MHz, HT40: 0 fastcc: 1
[ 218.321964] ath: phy1: Set channel: 2442 MHz width: 0
[ 218.322110] ath: phy1: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 218.383026] ath: phy1: Set channel: 2447 MHz width: 0
[ 218.383178] ath: phy1: Reset to 2447 MHz, HT40: 0 fastcc: 1
[ 218.444037] ath: phy1: Set channel: 2452 MHz width: 0
[ 218.444187] ath: phy1: Reset to 2452 MHz, HT40: 0 fastcc: 1
[ 218.505047] ath: phy1: Set channel: 2457 MHz width: 0
[ 218.505197] ath: phy1: Reset to 2457 MHz, HT40: 0 fastcc: 1
[ 218.506167] ath: phy1: Set power: 16
[ 218.566085] ath: phy1: Set channel: 2462 MHz width: 0
[ 218.566223] ath: phy1: Reset to 2462 MHz, HT40: 0 fastcc: 1
[ 218.567196] ath: phy1: Set power: 17
[ 218.627124] ath: phy1: Set channel: 2467 MHz width: 0
[ 218.627292] ath: phy1: Reset to 2467 MHz, HT40: 0 fastcc: 1
[ 218.739158] ath: phy1: Set channel: 2472 MHz width: 0
[ 218.739305] ath: phy1: Reset to 2472 MHz, HT40: 0 fastcc: 1
[ 218.740319] ath: phy1: Set power: 16
[ 218.851212] ath: phy1: Set channel: 5180 MHz width: 0
[ 218.851369] ath: phy1: Reset to 5180 MHz, HT40: 0 fastcc: 1
[ 218.856388] ath: phy1: Set power: 15
[ 218.967275] ath: phy1: Set channel: 5200 MHz width: 0
[ 218.967442] ath: phy1: Reset to 5200 MHz, HT40: 0 fastcc: 1
[ 219.079286] ath: phy1: Set channel: 5220 MHz width: 0
[ 219.079423] ath: phy1: Reset to 5220 MHz, HT40: 0 fastcc: 1
[ 219.191342] ath: phy1: Set channel: 5240 MHz width: 0
[ 219.191475] ath: phy1: Reset to 5240 MHz, HT40: 0 fastcc: 1
[ 219.303394] ath: phy1: Set channel: 5260 MHz width: 0
[ 219.303531] ath: phy1: Reset to 5260 MHz, HT40: 0 fastcc: 1
[ 219.304443] ath: phy1: Set power: 17
[ 219.415439] ath: phy1: Set channel: 5280 MHz width: 0
[ 219.415580] ath: phy1: Reset to 5280 MHz, HT40: 0 fastcc: 1
[ 219.416505] ath: phy1: Set power: 15
[ 219.527448] ath: phy1: Set channel: 5300 MHz width: 0
[ 219.527590] ath: phy1: Reset to 5300 MHz, HT40: 0 fastcc: 1
[ 219.639552] ath: phy1: Set channel: 5320 MHz width: 0
[ 219.639683] ath: phy1: Reset to 5320 MHz, HT40: 0 fastcc: 1
[ 219.751601] ath: phy1: Set channel: 5500 MHz width: 0
[ 219.751739] ath: phy1: Reset to 5500 MHz, HT40: 0 fastcc: 1
[ 219.752654] ath: phy1: Set power: 16
[ 219.863639] ath: phy1: Set channel: 5520 MHz width: 0
[ 219.863787] ath: phy1: Reset to 5520 MHz, HT40: 0 fastcc: 1
[ 219.864807] ath: phy1: Set power: 17
[ 219.975736] ath: phy1: Set channel: 5540 MHz width: 0
[ 219.975880] ath: phy1: Reset to 5540 MHz, HT40: 0 fastcc: 1
[ 220.087779] ath: phy1: Set channel: 5560 MHz width: 0
[ 220.087927] ath: phy1: Reset to 5560 MHz, HT40: 0 fastcc: 1
[ 220.199838] ath: phy1: Set channel: 5580 MHz width: 0
[ 220.199977] ath: phy1: Reset to 5580 MHz, HT40: 0 fastcc: 1
[ 220.311889] ath: phy1: Set channel: 5600 MHz width: 0
[ 220.312026] ath: phy1: Reset to 5600 MHz, HT40: 0 fastcc: 1
[ 220.423914] ath: phy1: Set channel: 5620 MHz width: 0
[ 220.424051] ath: phy1: Reset to 5620 MHz, HT40: 0 fastcc: 1
[ 220.535993] ath: phy1: Set channel: 5640 MHz width: 0
[ 220.536130] ath: phy1: Reset to 5640 MHz, HT40: 0 fastcc: 1
[ 220.648063] ath: phy1: Set channel: 5660 MHz width: 0
[ 220.648207] ath: phy1: Reset to 5660 MHz, HT40: 0 fastcc: 1
[ 220.760088] ath: phy1: Set channel: 5680 MHz width: 0
[ 220.760245] ath: phy1: Reset to 5680 MHz, HT40: 0 fastcc: 1
[ 220.872132] ath: phy1: Set channel: 5700 MHz width: 0
[ 220.872279] ath: phy1: Reset to 5700 MHz, HT40: 0 fastcc: 1
[ 220.873194] ath: phy1: Set power: 16
[ 220.984201] ath: phy1: Set channel: 5745 MHz width: 0
[ 220.984337] ath: phy1: Reset to 5745 MHz, HT40: 0 fastcc: 1
[ 220.985257] ath: phy1: Set power: 17
[ 221.096247] ath: phy1: Set channel: 5765 MHz width: 0
[ 221.096384] ath: phy1: Reset to 5765 MHz, HT40: 0 fastcc: 1
[ 221.208302] ath: phy1: Set channel: 5785 MHz width: 0
[ 221.208438] ath: phy1: Reset to 5785 MHz, HT40: 0 fastcc: 1
[ 221.320360] ath: phy1: Set channel: 5805 MHz width: 0
[ 221.320500] ath: phy1: Reset to 5805 MHz, HT40: 0 fastcc: 1
[ 221.432406] ath: phy1: Set channel: 5825 MHz width: 0
[ 221.432540] ath: phy1: Reset to 5825 MHz, HT40: 0 fastcc: 1
[ 221.544470] ath: phy1: Set channel: 2412 MHz width: 0
[ 221.544613] ath: phy1: Reset to 2412 MHz, HT40: 0 fastcc: 0
[ 221.548695] ath: phy1: Set power: 16
[ 221.548730] ath: phy1: Set HW RX filter: 0x207
[ 221.582107] ath: phy1: Set HW RX filter: 0x17
[ 221.582119] ath: phy1: Set channel: 2412 MHz width: 0
[ 221.582267] ath: phy1: Reset to 2412 MHz, HT40: 0 fastcc: 0
[ 221.646515] ath: phy1: Set channel: 2417 MHz width: 0
[ 221.646677] ath: phy1: Reset to 2417 MHz, HT40: 0 fastcc: 1
[ 221.647599] ath: phy1: Set power: 17
[ 221.707481] ath: phy1: Set channel: 2422 MHz width: 0
[ 221.707653] ath: phy1: Reset to 2422 MHz, HT40: 0 fastcc: 1
[ 221.768572] ath: phy1: Set channel: 2427 MHz width: 0
[ 221.768710] ath: phy1: Reset to 2427 MHz, HT40: 0 fastcc: 1
[ 221.829589] ath: phy1: Set channel: 2432 MHz width: 0
[ 221.829728] ath: phy1: Reset to 2432 MHz, HT40: 0 fastcc: 1
[ 221.890653] ath: phy1: Set channel: 2437 MHz width: 0
[ 221.890809] ath: phy1: Reset to 2437 MHz, HT40: 0 fastcc: 1
[ 221.951600] ath: phy1: Set channel: 2442 MHz width: 0
[ 221.951743] ath: phy1: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 222.012613] ath: phy1: Set channel: 2447 MHz width: 0
[ 222.012757] ath: phy1: Reset to 2447 MHz, HT40: 0 fastcc: 1
[ 222.073673] ath: phy1: Set channel: 2452 MHz width: 0
[ 222.073808] ath: phy1: Reset to 2452 MHz, HT40: 0 fastcc: 1
[ 222.134695] ath: phy1: Set channel: 2457 MHz width: 0
[ 222.134827] ath: phy1: Reset to 2457 MHz, HT40: 0 fastcc: 1
[ 222.135790] ath: phy1: Set power: 16
[ 222.195700] ath: phy1: Set channel: 2462 MHz width: 0
[ 222.195839] ath: phy1: Reset to 2462 MHz, HT40: 0 fastcc: 1
[ 222.196834] ath: phy1: Set power: 17
[ 222.256764] ath: phy1: Set channel: 2467 MHz width: 0
[ 222.256914] ath: phy1: Reset to 2467 MHz, HT40: 0 fastcc: 1
[ 222.368815] ath: phy1: Set channel: 2472 MHz width: 0
[ 222.368971] ath: phy1: Reset to 2472 MHz, HT40: 0 fastcc: 1
[ 222.369964] ath: phy1: Set power: 16
[ 222.480864] ath: phy1: Set channel: 5180 MHz width: 0
[ 222.480999] ath: phy1: Reset to 5180 MHz, HT40: 0 fastcc: 1
[ 222.485970] ath: phy1: Set power: 15
[ 222.545933] ath: phy1: Set channel: 5200 MHz width: 0
[ 222.546070] ath: phy1: Reset to 5200 MHz, HT40: 0 fastcc: 1
[ 222.657959] ath: phy1: Set channel: 5220 MHz width: 0
[ 222.658104] ath: phy1: Reset to 5220 MHz, HT40: 0 fastcc: 1
[ 222.770001] ath: phy1: Set channel: 5240 MHz width: 0
[ 222.770139] ath: phy1: Reset to 5240 MHz, HT40: 0 fastcc: 1
[ 222.882029] ath: phy1: Set channel: 5260 MHz width: 0
[ 222.882172] ath: phy1: Reset to 5260 MHz, HT40: 0 fastcc: 1
[ 222.883103] ath: phy1: Set power: 17
[ 222.994099] ath: phy1: Set channel: 5280 MHz width: 0
[ 222.994246] ath: phy1: Reset to 5280 MHz, HT40: 0 fastcc: 1
[ 222.995184] ath: phy1: Set power: 15
[ 223.106155] ath: phy1: Set channel: 5300 MHz width: 0
[ 223.106306] ath: phy1: Reset to 5300 MHz, HT40: 0 fastcc: 1
[ 223.218222] ath: phy1: Set channel: 5320 MHz width: 0
[ 223.218354] ath: phy1: Reset to 5320 MHz, HT40: 0 fastcc: 1
[ 223.330262] ath: phy1: Set channel: 5500 MHz width: 0
[ 223.330402] ath: phy1: Reset to 5500 MHz, HT40: 0 fastcc: 1
[ 223.331343] ath: phy1: Set power: 16
[ 223.442269] ath: phy1: Set channel: 5520 MHz width: 0
[ 223.442430] ath: phy1: Reset to 5520 MHz, HT40: 0 fastcc: 1
[ 223.443401] ath: phy1: Set power: 17
[ 223.554358] ath: phy1: Set channel: 5540 MHz width: 0
[ 223.554491] ath: phy1: Reset to 5540 MHz, HT40: 0 fastcc: 1
[ 223.666410] ath: phy1: Set channel: 5560 MHz width: 0
[ 223.666534] ath: phy1: Reset to 5560 MHz, HT40: 0 fastcc: 1
[ 223.778459] ath: phy1: Set channel: 5580 MHz width: 0
[ 223.778605] ath: phy1: Reset to 5580 MHz, HT40: 0 fastcc: 1
[ 223.890513] ath: phy1: Set channel: 5600 MHz width: 0
[ 223.890649] ath: phy1: Reset to 5600 MHz, HT40: 0 fastcc: 1
[ 224.002561] ath: phy1: Set channel: 5620 MHz width: 0
[ 224.002694] ath: phy1: Reset to 5620 MHz, HT40: 0 fastcc: 1
[ 224.114610] ath: phy1: Set channel: 5640 MHz width: 0
[ 224.114752] ath: phy1: Reset to 5640 MHz, HT40: 0 fastcc: 1
[ 224.226625] ath: phy1: Set channel: 5660 MHz width: 0
[ 224.226767] ath: phy1: Reset to 5660 MHz, HT40: 0 fastcc: 1
[ 224.338722] ath: phy1: Set channel: 5680 MHz width: 0
[ 224.338871] ath: phy1: Reset to 5680 MHz, HT40: 0 fastcc: 1
[ 224.450773] ath: phy1: Set channel: 5700 MHz width: 0
[ 224.450909] ath: phy1: Reset to 5700 MHz, HT40: 0 fastcc: 1
[ 224.451818] ath: phy1: Set power: 16
[ 224.562822] ath: phy1: Set channel: 5745 MHz width: 0
[ 224.562949] ath: phy1: Reset to 5745 MHz, HT40: 0 fastcc: 1
[ 224.563860] ath: phy1: Set power: 17
[ 224.674875] ath: phy1: Set channel: 5765 MHz width: 0
[ 224.675014] ath: phy1: Reset to 5765 MHz, HT40: 0 fastcc: 1
[ 224.786905] ath: phy1: Set channel: 5785 MHz width: 0
[ 224.787063] ath: phy1: Reset to 5785 MHz, HT40: 0 fastcc: 1
[ 224.898984] ath: phy1: Set channel: 5805 MHz width: 0
[ 224.899117] ath: phy1: Reset to 5805 MHz, HT40: 0 fastcc: 1
[ 225.011029] ath: phy1: Set channel: 5825 MHz width: 0
[ 225.011160] ath: phy1: Reset to 5825 MHz, HT40: 0 fastcc: 1
[ 225.123083] ath: phy1: Set channel: 2412 MHz width: 0
[ 225.123218] ath: phy1: Reset to 2412 MHz, HT40: 0 fastcc: 0
[ 225.123476] wlan11: authenticate with 90:f6:52:ff:d3:86
[ 225.127328] ath: phy1: Set power: 16
[ 225.127367] ath: phy1: Set HW RX filter: 0x207
[ 225.127397] ath: phy1: Set channel: 5180 MHz width: 2
[ 225.127532] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 225.133828] ath: phy1: Set power: 15
[ 225.133938] wlan11: send auth to 90:f6:52:ff:d3:86 (try 1/3)
[ 225.135474] wlan11: authenticated
[ 225.136141] wlan11: associate with 90:f6:52:ff:d3:86 (try 1/3)
[ 225.138097] wlan11: RX AssocResp from 90:f6:52:ff:d3:86 (capab=0x11 status=0 aid=1)
[ 225.138111] ath: phy1: Configure tx [queue/halq] [2/2], aifs: 3, cw_min: 15, cw_max: 1023, txop: 0
[ 225.138117] ath: phy1: Configure tx [queue/halq] [3/3], aifs: 7, cw_min: 15, cw_max: 1023, txop: 0
[ 225.138121] ath: phy1: Configure tx [queue/halq] [1/1], aifs: 2, cw_min: 7, cw_max: 15, txop: 94
[ 225.138125] ath: phy1: Configure tx [queue/halq] [0/0], aifs: 2, cw_min: 3, cw_max: 7, txop: 47
[ 225.138130] ath: phy1: BSSID 90:f6:52:ff:d3:86 Changed ASSOC 1
[ 225.138132] ath: phy1: Primary Station interface: 68:94:23:16:16:75, BSSID: 90:f6:52:ff:d3:86
[ 225.138157] wlan11: associated
[ 225.138167] IPv6: ADDRCONF(NETDEV_CHANGE): wlan11: link becomes ready
[ 225.138949] cfg80211: Calling CRDA for country: DE
[ 225.138978] ath: phy1: Set HW RX filter: 0x607
[ 225.141737] ath: EEPROM regdomain: 0x8114
[ 225.141740] ath: EEPROM indicates we should expect a country code
[ 225.141741] ath: doing EEPROM country->regdmn map search
[ 225.141742] ath: country maps to regdmn code: 0x37
[ 225.141744] ath: Country alpha2 being used: DE
[ 225.141745] ath: Regpair used: 0x37
[ 225.141746] ath: regdomain 0x8114 dynamically updated by country IE
[ 225.141774] cfg80211: Regulatory domain changed to country: DE
[ 225.141775] cfg80211: DFS Master region: unset
[ 225.141777] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 225.141780] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 225.141782] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 225.141783] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 225.141785] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 225.141788] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 225.144843] ath: phy1: Set HW Key
[ 225.144930] ath: phy1: Set HW Key
[ 225.149577] ath: phy1: Set HW RX filter: 0x607
[ 225.180937] ath: phy1: Set HW RX filter: 0x607
[ 226.648100] ath: phy1: Set HW RX filter: 0x607
[ 241.138012] ath: phy1: Set HW RX filter: 0x417
[ 241.138044] ath: phy1: Set channel: 2412 MHz width: 0
[ 241.138188] ath: phy1: Reset to 2412 MHz, HT40: 0 fastcc: 1
[ 241.202526] ath: phy1: Set channel: 2417 MHz width: 0
[ 241.202678] ath: phy1: Reset to 2417 MHz, HT40: 0 fastcc: 1
[ 241.263575] ath: phy1: Set channel: 5180 MHz width: 2
[ 241.263732] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 241.467950] ath: phy1: Set channel: 2422 MHz width: 0
[ 241.468117] ath: phy1: Reset to 2422 MHz, HT40: 0 fastcc: 1
[ 241.532688] ath: phy1: Set channel: 2427 MHz width: 0
[ 241.532869] ath: phy1: Reset to 2427 MHz, HT40: 0 fastcc: 1
[ 241.593719] ath: phy1: Set channel: 5180 MHz width: 2
[ 241.593864] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 241.798084] ath: phy1: Set channel: 2432 MHz width: 0
[ 241.798227] ath: phy1: Reset to 2432 MHz, HT40: 0 fastcc: 1
[ 241.862835] ath: phy1: Set channel: 2437 MHz width: 0
[ 241.862988] ath: phy1: Reset to 2437 MHz, HT40: 0 fastcc: 1
[ 241.923892] ath: phy1: Set channel: 5180 MHz width: 2
[ 241.924053] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 242.128233] ath: phy1: Set channel: 2442 MHz width: 0
[ 242.128375] ath: phy1: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 242.192985] ath: phy1: Set channel: 2447 MHz width: 0
[ 242.193126] ath: phy1: Reset to 2447 MHz, HT40: 0 fastcc: 1
[ 242.253966] ath: phy1: Set channel: 5180 MHz width: 2
[ 242.254120] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 242.458361] ath: phy1: Set channel: 2452 MHz width: 0
[ 242.458516] ath: phy1: Reset to 2452 MHz, HT40: 0 fastcc: 1
[ 242.523100] ath: phy1: Set channel: 2457 MHz width: 0
[ 242.523238] ath: phy1: Reset to 2457 MHz, HT40: 0 fastcc: 1
[ 242.584177] ath: phy1: Set channel: 5180 MHz width: 2
[ 242.584335] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 242.788617] ath: phy1: Set channel: 2462 MHz width: 0
[ 242.788759] ath: phy1: Reset to 2462 MHz, HT40: 0 fastcc: 1
[ 242.853305] ath: phy1: Set channel: 5180 MHz width: 2
[ 242.853469] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 243.057720] ath: phy1: Set channel: 2467 MHz width: 0
[ 243.057874] ath: phy1: Reset to 2467 MHz, HT40: 0 fastcc: 1
[ 243.173450] ath: phy1: Set channel: 5180 MHz width: 2
[ 243.173600] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 243.377866] ath: phy1: Set channel: 2472 MHz width: 0
[ 243.378025] ath: phy1: Reset to 2472 MHz, HT40: 0 fastcc: 1
[ 243.432769] ath: phy1: BB_WATCHDOG: Skipping interrupts
[ 243.432965] ath: phy1: Reset to 2472 MHz, HT40: 0 fastcc: 0
[ 243.493597] ath: phy1: Set channel: 5180 MHz width: 2
[ 243.493752] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 243.698009] ath: phy1: Set channel: 5180 MHz width: 2
[ 243.698153] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 243.813744] ath: phy1: Set channel: 5180 MHz width: 2
[ 243.813901] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 244.018107] ath: phy1: Set channel: 5200 MHz width: 0
[ 244.018272] ath: phy1: Reset to 5200 MHz, HT40: 0 fastcc: 1
[ 244.133893] ath: phy1: Set channel: 5180 MHz width: 2
[ 244.134039] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 244.338270] ath: phy1: Set channel: 5220 MHz width: 0
[ 244.338433] ath: phy1: Reset to 5220 MHz, HT40: 0 fastcc: 1
[ 244.454031] ath: phy1: Set channel: 5180 MHz width: 2
[ 244.454172] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 244.658424] ath: phy1: Set channel: 5240 MHz width: 0
[ 244.658591] ath: phy1: Reset to 5240 MHz, HT40: 0 fastcc: 1
[ 244.774165] ath: phy1: Set channel: 5180 MHz width: 2
[ 244.774326] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 244.978509] ath: phy1: Set channel: 5260 MHz width: 0
[ 244.978651] ath: phy1: Reset to 5260 MHz, HT40: 0 fastcc: 1
[ 245.094291] ath: phy1: Set channel: 5180 MHz width: 2
[ 245.094434] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 245.298699] ath: phy1: Set channel: 5280 MHz width: 0
[ 245.298846] ath: phy1: Reset to 5280 MHz, HT40: 0 fastcc: 1
[ 245.414397] ath: phy1: Set channel: 5180 MHz width: 2
[ 245.414544] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 245.618862] ath: phy1: Set channel: 5300 MHz width: 0
[ 245.619007] ath: phy1: Reset to 5300 MHz, HT40: 0 fastcc: 1
[ 245.734583] ath: phy1: Set channel: 5180 MHz width: 2
[ 245.734723] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 245.938921] ath: phy1: Set channel: 5320 MHz width: 0
[ 245.939066] ath: phy1: Reset to 5320 MHz, HT40: 0 fastcc: 1
[ 246.054749] ath: phy1: Set channel: 5180 MHz width: 2
[ 246.054910] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 246.259159] ath: phy1: Set channel: 5500 MHz width: 0
[ 246.259319] ath: phy1: Reset to 5500 MHz, HT40: 0 fastcc: 1
[ 246.374928] ath: phy1: Set channel: 5180 MHz width: 2
[ 246.375084] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 246.579309] ath: phy1: Set channel: 5520 MHz width: 0
[ 246.579466] ath: phy1: Reset to 5520 MHz, HT40: 0 fastcc: 1
[ 246.695079] ath: phy1: Set channel: 5180 MHz width: 2
[ 246.695244] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 246.899397] ath: phy1: Set channel: 5540 MHz width: 0
[ 246.899552] ath: phy1: Reset to 5540 MHz, HT40: 0 fastcc: 1
[ 247.015218] ath: phy1: Set channel: 5180 MHz width: 2
[ 247.015371] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 247.219624] ath: phy1: Set channel: 5560 MHz width: 0
[ 247.219804] ath: phy1: Reset to 5560 MHz, HT40: 0 fastcc: 1
[ 247.335346] ath: phy1: Set channel: 5180 MHz width: 2
[ 247.335503] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 247.539601] ath: phy1: Set channel: 5580 MHz width: 0
[ 247.539735] ath: phy1: Reset to 5580 MHz, HT40: 0 fastcc: 1
[ 247.655451] ath: phy1: Set channel: 5180 MHz width: 2
[ 247.655601] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 247.859790] ath: phy1: Set channel: 5600 MHz width: 0
[ 247.859951] ath: phy1: Reset to 5600 MHz, HT40: 0 fastcc: 1
[ 247.975656] ath: phy1: Set channel: 5180 MHz width: 2
[ 247.975797] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 248.179992] ath: phy1: Set channel: 5620 MHz width: 0
[ 248.180162] ath: phy1: Reset to 5620 MHz, HT40: 0 fastcc: 1
[ 248.295817] ath: phy1: Set channel: 5180 MHz width: 2
[ 248.296009] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 248.499983] ath: phy1: Set channel: 5640 MHz width: 0
[ 248.500124] ath: phy1: Reset to 5640 MHz, HT40: 0 fastcc: 1
[ 248.615870] ath: phy1: Set channel: 5180 MHz width: 2
[ 248.616012] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 248.820256] ath: phy1: Set channel: 5660 MHz width: 0
[ 248.820393] ath: phy1: Reset to 5660 MHz, HT40: 0 fastcc: 1
[ 248.936050] ath: phy1: Set channel: 5180 MHz width: 2
[ 248.936199] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 249.140438] ath: phy1: Set channel: 5680 MHz width: 0
[ 249.140622] ath: phy1: Reset to 5680 MHz, HT40: 0 fastcc: 1
[ 249.256222] ath: phy1: Set channel: 5180 MHz width: 2
[ 249.256367] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 249.460619] ath: phy1: Set channel: 5700 MHz width: 0
[ 249.460770] ath: phy1: Reset to 5700 MHz, HT40: 0 fastcc: 1
[ 249.576374] ath: phy1: Set channel: 5180 MHz width: 2
[ 249.576533] ath: phy1: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 249.581071] ath: phy1: Set HW RX filter: 0x607
[ 251.586540] ath: phy1: Set HW RX filter: 0x607
[ 252.904859] ath: phy1: Set HW RX filter: 0x607
[ 264.713437] wlan11: deauthenticating from 90:f6:52:ff:d3:86 by local choice (reason=3)
[ 264.713812] ath: phy1: Set HW Key
[ 264.713883] ath: phy1: BSSID 00:00:00:00:00:00 Changed ASSOC 0
[ 264.713900] ath: phy1: Configure tx [queue/halq] [0/0], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 264.713906] ath: phy1: Configure tx [queue/halq] [1/1], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 264.713910] ath: phy1: Configure tx [queue/halq] [2/2], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 264.713914] ath: phy1: Configure tx [queue/halq] [3/3], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 264.713920] ath: phy1: Set channel: 5180 MHz width: 0
[ 264.714035] ath: phy1: Reset to 5180 MHz, HT40: 0 fastcc: 0
[ 264.719939] ath: phy1: Set power: 20
[ 264.719973] ath: phy1: Set HW Key
[ 264.720022] ath: phy1: Detach Interface
[ 264.724338] ath: phy1: Driver halt
[ 264.737740] cfg80211: Calling CRDA to update world regulatory domain
[ 264.745454] cfg80211: World regulatory domain updated:
[ 264.745458] cfg80211: DFS Master region: unset
[ 264.745460] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 264.745463] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 264.745466] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 264.745468] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 264.745470] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 264.745472] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 264.745843] ath9k: ath9k: Driver unloaded
[ 268.882171] ath: EEPROM regdomain: 0x6c
[ 268.882176] ath: EEPROM indicates we should expect a direct regpair map
[ 268.882179] ath: Country alpha2 being used: 00
[ 268.882181] ath: Regpair used: 0x6c
[ 268.882866] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[ 268.883417] ieee80211 phy2: Atheros AR9462 Rev:2 mem=0xffffc9000d280000, irq=17
[ 268.893536] systemd-udevd[4573]: renamed network interface wlan0 to wlan11
[ 268.906737] IPv6: ADDRCONF(NETDEV_UP): wlan11: link is not ready
[ 276.109063] wlan11: authenticate with 90:f6:52:ff:d3:85
[ 276.119326] wlan11: send auth to 90:f6:52:ff:d3:85 (try 1/3)
[ 276.121655] wlan11: authenticated
[ 276.122612] wlan11: associate with 90:f6:52:ff:d3:85 (try 1/3)
[ 276.127838] wlan11: RX AssocResp from 90:f6:52:ff:d3:85 (capab=0x431 status=0 aid=4)
[ 276.127879] wlan11: associated
[ 276.127888] IPv6: ADDRCONF(NETDEV_CHANGE): wlan11: link becomes ready
[ 276.128186] cfg80211: Calling CRDA for country: DE
[ 276.130712] ath: EEPROM regdomain: 0x8114
[ 276.130714] ath: EEPROM indicates we should expect a country code
[ 276.130716] ath: doing EEPROM country->regdmn map search
[ 276.130717] ath: country maps to regdmn code: 0x37
[ 276.130718] ath: Country alpha2 being used: DE
[ 276.130719] ath: Regpair used: 0x37
[ 276.130721] ath: regdomain 0x8114 dynamically updated by country IE
[ 276.130749] cfg80211: Regulatory domain changed to country: DE
[ 276.130750] cfg80211: DFS Master region: unset
[ 276.130751] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 276.130753] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 276.130754] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 276.130755] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 276.130757] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 276.130758] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 401.816157] ath: phy2: BB_WATCHDOG: Skipping interrupts
[ 561.465789] wlan11: deauthenticating from 90:f6:52:ff:d3:85 by local choice (reason=3)
[ 561.536076] cfg80211: Calling CRDA to update world regulatory domain
[ 561.540463] cfg80211: World regulatory domain updated:
[ 561.540467] cfg80211: DFS Master region: unset
[ 561.540469] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 561.540471] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 561.540473] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 561.540474] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 561.540476] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 561.540477] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 565.179463] wlan11: authenticate with 90:f6:52:ff:d3:86
[ 565.189841] wlan11: direct probe to 90:f6:52:ff:d3:86 (try 1/3)
[ 565.390086] wlan11: send auth to 90:f6:52:ff:d3:86 (try 2/3)
[ 565.391888] wlan11: authenticated
[ 565.393092] wlan11: associate with 90:f6:52:ff:d3:86 (try 1/3)
[ 565.395502] wlan11: RX AssocResp from 90:f6:52:ff:d3:86 (capab=0x11 status=0 aid=1)
[ 565.395545] wlan11: associated
[ 565.395596] cfg80211: Calling CRDA for country: DE
[ 565.398250] ath: EEPROM regdomain: 0x8114
[ 565.398253] ath: EEPROM indicates we should expect a country code
[ 565.398254] ath: doing EEPROM country->regdmn map search
[ 565.398255] ath: country maps to regdmn code: 0x37
[ 565.398256] ath: Country alpha2 being used: DE
[ 565.398257] ath: Regpair used: 0x37
[ 565.398259] ath: regdomain 0x8114 dynamically updated by country IE
[ 565.398286] cfg80211: Regulatory domain changed to country: DE
[ 565.398287] cfg80211: DFS Master region: unset
[ 565.398288] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 565.398290] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 565.398292] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 565.398293] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 565.398294] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 565.398296] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 1362.632928] ath: phy2: BB_WATCHDOG: Skipping interrupts
[ 1602.740870] ath: phy2: BB_WATCHDOG: Skipping interrupts
[ 1722.799334] ath: phy2: BB_WATCHDOG: Skipping interrupts
[ 1961.990793] ath: phy2: unsupported hw bitrate detected 0x1b using 1 Mbit
[ 2083.285649] ath: phy2: BB_WATCHDOG: Skipping interrupts
[ 2443.131721] ath: phy2: BB_WATCHDOG: Skipping interrupts
[ 2502.610187] wlan11: deauthenticating from 90:f6:52:ff:d3:86 by local choice (reason=3)
[ 2502.631553] cfg80211: Calling CRDA to update world regulatory domain
[ 2502.638679] ath9k: ath9k: Driver unloaded
[ 2502.639409] cfg80211: World regulatory domain updated:
[ 2502.639413] cfg80211: DFS Master region: unset
[ 2502.639414] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2502.639417] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2502.639419] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2502.639422] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2502.639424] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2502.639426] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2510.156471] ath: phy3: Eeprom VER: 2, REV: 0
[ 2510.157788] ath: phy3: TX streams 2, RX streams: 2
[ 2510.157789] ath: phy3: TX streams 2, RX streams: 2
[ 2510.157791] ath: EEPROM regdomain: 0x6c
[ 2510.157792] ath: EEPROM indicates we should expect a direct regpair map
[ 2510.157794] ath: Country alpha2 being used: 00
[ 2510.157795] ath: Regpair used: 0x6c
[ 2510.157799] ath: phy3: tx DMA: 512 buffers 1 desc/buf
[ 2510.157807] ath: phy3: tx DMA map: ffff880092ba0000 (65536) -> 92ba0000 (65536)
[ 2510.157819] ath: phy3: beacon DMA: 8 buffers 1 desc/buf
[ 2510.157821] ath: phy3: beacon DMA map: ffff88009295b000 (1024) -> 9295b000 (1024)
[ 2510.158331] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'
[ 2510.158796] ieee80211 phy3: Atheros AR9462 Rev:2 mem=0xffffc9000d900000, irq=17
[ 2510.173827] systemd-udevd[5268]: renamed network interface wlan0 to wlan11
[ 2510.175071] ath: phy3: Starting driver with initial channel: 2412 MHz
[ 2510.180621] ath: phy3: Attach a VIF of type: 2
[ 2510.180663] ath: phy3: Configure tx [queue/halq] [0/0], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 2510.180672] ath: phy3: Configure tx [queue/halq] [1/1], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 2510.180678] ath: phy3: Configure tx [queue/halq] [2/2], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 2510.180685] ath: phy3: Configure tx [queue/halq] [3/3], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 2510.180693] ath: phy3: Monitor mode is disabled
[ 2510.180696] ath: phy3: Set channel: 2412 MHz width: 0
[ 2510.180828] ath: phy3: Reset to 2412 MHz, HT40: 0 fastcc: 0
[ 2510.186699] ath: phy3: Set power: 16
[ 2510.186747] ath: phy3: Set HW RX filter: 0x207
[ 2510.186754] ath: phy3: Set HW RX filter: 0x207
[ 2510.187164] IPv6: ADDRCONF(NETDEV_UP): wlan11: link is not ready
[ 2510.187178] ath: phy3: Set HW RX filter: 0x207
[ 2510.204930] ath: phy3: Set HW RX filter: 0x17
[ 2510.205106] ath: phy3: Set channel: 2412 MHz width: 0
[ 2510.205245] ath: phy3: Reset to 2412 MHz, HT40: 0 fastcc: 0
[ 2510.268663] ath: phy3: Set channel: 2417 MHz width: 0
[ 2510.268819] ath: phy3: Reset to 2417 MHz, HT40: 0 fastcc: 1
[ 2510.269736] ath: phy3: Set power: 17
[ 2510.329709] ath: phy3: Set channel: 2422 MHz width: 0
[ 2510.329843] ath: phy3: Reset to 2422 MHz, HT40: 0 fastcc: 1
[ 2510.390717] ath: phy3: Set channel: 2427 MHz width: 0
[ 2510.390848] ath: phy3: Reset to 2427 MHz, HT40: 0 fastcc: 1
[ 2510.451723] ath: phy3: Set channel: 2432 MHz width: 0
[ 2510.451881] ath: phy3: Reset to 2432 MHz, HT40: 0 fastcc: 1
[ 2510.512792] ath: phy3: Set channel: 2437 MHz width: 0
[ 2510.512930] ath: phy3: Reset to 2437 MHz, HT40: 0 fastcc: 1
[ 2510.573809] ath: phy3: Set channel: 2442 MHz width: 0
[ 2510.573937] ath: phy3: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 2510.634850] ath: phy3: Set channel: 2447 MHz width: 0
[ 2510.634986] ath: phy3: Reset to 2447 MHz, HT40: 0 fastcc: 1
[ 2510.695864] ath: phy3: Set channel: 2452 MHz width: 0
[ 2510.696035] ath: phy3: Reset to 2452 MHz, HT40: 0 fastcc: 1
[ 2510.756906] ath: phy3: Set channel: 2457 MHz width: 0
[ 2510.757043] ath: phy3: Reset to 2457 MHz, HT40: 0 fastcc: 1
[ 2510.758024] ath: phy3: Set power: 16
[ 2510.817938] ath: phy3: Set channel: 2462 MHz width: 0
[ 2510.818075] ath: phy3: Reset to 2462 MHz, HT40: 0 fastcc: 1
[ 2510.819060] ath: phy3: Set power: 17
[ 2510.878987] ath: phy3: Set channel: 2467 MHz width: 0
[ 2510.879130] ath: phy3: Reset to 2467 MHz, HT40: 0 fastcc: 1
[ 2510.991013] ath: phy3: Set channel: 2472 MHz width: 0
[ 2510.991162] ath: phy3: Reset to 2472 MHz, HT40: 0 fastcc: 1
[ 2510.992126] ath: phy3: Set power: 16
[ 2511.103066] ath: phy3: Set channel: 5180 MHz width: 0
[ 2511.103191] ath: phy3: Reset to 5180 MHz, HT40: 0 fastcc: 1
[ 2511.108162] ath: phy3: Set power: 15
[ 2511.219123] ath: phy3: Set channel: 5200 MHz width: 0
[ 2511.219260] ath: phy3: Reset to 5200 MHz, HT40: 0 fastcc: 1
[ 2511.331179] ath: phy3: Set channel: 5220 MHz width: 0
[ 2511.331315] ath: phy3: Reset to 5220 MHz, HT40: 0 fastcc: 1
[ 2511.443222] ath: phy3: Set channel: 5240 MHz width: 0
[ 2511.443370] ath: phy3: Reset to 5240 MHz, HT40: 0 fastcc: 1
[ 2511.555273] ath: phy3: Set channel: 5260 MHz width: 0
[ 2511.555399] ath: phy3: Reset to 5260 MHz, HT40: 0 fastcc: 1
[ 2511.556327] ath: phy3: Set power: 17
[ 2511.667332] ath: phy3: Set channel: 5280 MHz width: 0
[ 2511.667482] ath: phy3: Reset to 5280 MHz, HT40: 0 fastcc: 1
[ 2511.668419] ath: phy3: Set power: 15
[ 2511.779362] ath: phy3: Set channel: 5300 MHz width: 0
[ 2511.779514] ath: phy3: Reset to 5300 MHz, HT40: 0 fastcc: 1
[ 2511.891446] ath: phy3: Set channel: 5320 MHz width: 0
[ 2511.891592] ath: phy3: Reset to 5320 MHz, HT40: 0 fastcc: 1
[ 2512.003483] ath: phy3: Set channel: 5500 MHz width: 0
[ 2512.003610] ath: phy3: Reset to 5500 MHz, HT40: 0 fastcc: 1
[ 2512.004534] ath: phy3: Set power: 16
[ 2512.115498] ath: phy3: Set channel: 5520 MHz width: 0
[ 2512.115659] ath: phy3: Reset to 5520 MHz, HT40: 0 fastcc: 1
[ 2512.116636] ath: phy3: Set power: 17
[ 2512.227558] ath: phy3: Set channel: 5540 MHz width: 0
[ 2512.227710] ath: phy3: Reset to 5540 MHz, HT40: 0 fastcc: 1
[ 2512.339637] ath: phy3: Set channel: 5560 MHz width: 0
[ 2512.339769] ath: phy3: Reset to 5560 MHz, HT40: 0 fastcc: 1
[ 2512.451690] ath: phy3: Set channel: 5580 MHz width: 0
[ 2512.451819] ath: phy3: Reset to 5580 MHz, HT40: 0 fastcc: 1
[ 2512.563740] ath: phy3: Set channel: 5600 MHz width: 0
[ 2512.563879] ath: phy3: Reset to 5600 MHz, HT40: 0 fastcc: 1
[ 2512.675791] ath: phy3: Set channel: 5620 MHz width: 0
[ 2512.675930] ath: phy3: Reset to 5620 MHz, HT40: 0 fastcc: 1
[ 2512.787793] ath: phy3: Set channel: 5640 MHz width: 0
[ 2512.787929] ath: phy3: Reset to 5640 MHz, HT40: 0 fastcc: 1
[ 2512.899909] ath: phy3: Set channel: 5660 MHz width: 0
[ 2512.900047] ath: phy3: Reset to 5660 MHz, HT40: 0 fastcc: 1
[ 2513.011950] ath: phy3: Set channel: 5680 MHz width: 0
[ 2513.012089] ath: phy3: Reset to 5680 MHz, HT40: 0 fastcc: 1
[ 2513.123963] ath: phy3: Set channel: 5700 MHz width: 0
[ 2513.124121] ath: phy3: Reset to 5700 MHz, HT40: 0 fastcc: 1
[ 2513.125039] ath: phy3: Set power: 16
[ 2513.236052] ath: phy3: Set channel: 5745 MHz width: 0
[ 2513.236187] ath: phy3: Reset to 5745 MHz, HT40: 0 fastcc: 1
[ 2513.237107] ath: phy3: Set power: 17
[ 2513.348104] ath: phy3: Set channel: 5765 MHz width: 0
[ 2513.348227] ath: phy3: Reset to 5765 MHz, HT40: 0 fastcc: 1
[ 2513.460146] ath: phy3: Set channel: 5785 MHz width: 0
[ 2513.460284] ath: phy3: Reset to 5785 MHz, HT40: 0 fastcc: 1
[ 2513.572199] ath: phy3: Set channel: 5805 MHz width: 0
[ 2513.572338] ath: phy3: Reset to 5805 MHz, HT40: 0 fastcc: 1
[ 2513.684257] ath: phy3: Set channel: 5825 MHz width: 0
[ 2513.684386] ath: phy3: Reset to 5825 MHz, HT40: 0 fastcc: 1
[ 2513.796312] ath: phy3: Set channel: 2412 MHz width: 0
[ 2513.796444] ath: phy3: Reset to 2412 MHz, HT40: 0 fastcc: 0
[ 2513.800534] ath: phy3: Set power: 16
[ 2513.800569] ath: phy3: Set HW RX filter: 0x207
[ 2513.856652] ath: phy3: Set HW RX filter: 0x17
[ 2513.856662] ath: phy3: Set channel: 2412 MHz width: 0
[ 2513.856789] ath: phy3: Reset to 2412 MHz, HT40: 0 fastcc: 0
[ 2513.920366] ath: phy3: Set channel: 2417 MHz width: 0
[ 2513.920489] ath: phy3: Reset to 2417 MHz, HT40: 0 fastcc: 1
[ 2513.921390] ath: phy3: Set power: 17
[ 2513.981399] ath: phy3: Set channel: 2422 MHz width: 0
[ 2513.981538] ath: phy3: Reset to 2422 MHz, HT40: 0 fastcc: 1
[ 2514.042406] ath: phy3: Set channel: 2427 MHz width: 0
[ 2514.042557] ath: phy3: Reset to 2427 MHz, HT40: 0 fastcc: 1
[ 2514.103452] ath: phy3: Set channel: 2432 MHz width: 0
[ 2514.103588] ath: phy3: Reset to 2432 MHz, HT40: 0 fastcc: 1
[ 2514.164480] ath: phy3: Set channel: 2437 MHz width: 0
[ 2514.164620] ath: phy3: Reset to 2437 MHz, HT40: 0 fastcc: 1
[ 2514.225510] ath: phy3: Set channel: 2442 MHz width: 0
[ 2514.225646] ath: phy3: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 2514.286525] ath: phy3: Set channel: 2447 MHz width: 0
[ 2514.286672] ath: phy3: Reset to 2447 MHz, HT40: 0 fastcc: 1
[ 2514.347537] ath: phy3: Set channel: 2452 MHz width: 0
[ 2514.347697] ath: phy3: Reset to 2452 MHz, HT40: 0 fastcc: 1
[ 2514.408540] ath: phy3: Set channel: 2457 MHz width: 0
[ 2514.408688] ath: phy3: Reset to 2457 MHz, HT40: 0 fastcc: 1
[ 2514.409667] ath: phy3: Set power: 16
[ 2514.469578] ath: phy3: Set channel: 2462 MHz width: 0
[ 2514.469715] ath: phy3: Reset to 2462 MHz, HT40: 0 fastcc: 1
[ 2514.470688] ath: phy3: Set power: 17
[ 2514.530606] ath: phy3: Set channel: 2467 MHz width: 0
[ 2514.530776] ath: phy3: Reset to 2467 MHz, HT40: 0 fastcc: 1
[ 2514.642705] ath: phy3: Set channel: 2472 MHz width: 0
[ 2514.642860] ath: phy3: Reset to 2472 MHz, HT40: 0 fastcc: 1
[ 2514.643822] ath: phy3: Set power: 16
[ 2514.754757] ath: phy3: Set channel: 5180 MHz width: 0
[ 2514.754883] ath: phy3: Reset to 5180 MHz, HT40: 0 fastcc: 1
[ 2514.759816] ath: phy3: Set power: 15
[ 2514.819799] ath: phy3: Set channel: 5200 MHz width: 0
[ 2514.819954] ath: phy3: Reset to 5200 MHz, HT40: 0 fastcc: 1
[ 2514.931776] ath: phy3: Set channel: 5220 MHz width: 0
[ 2514.931929] ath: phy3: Reset to 5220 MHz, HT40: 0 fastcc: 1
[ 2515.043840] ath: phy3: Set channel: 5240 MHz width: 0
[ 2515.044010] ath: phy3: Reset to 5240 MHz, HT40: 0 fastcc: 1
[ 2515.155942] ath: phy3: Set channel: 5260 MHz width: 0
[ 2515.156076] ath: phy3: Reset to 5260 MHz, HT40: 0 fastcc: 1
[ 2515.156986] ath: phy3: Set power: 17
[ 2515.267998] ath: phy3: Set channel: 5280 MHz width: 0
[ 2515.268128] ath: phy3: Reset to 5280 MHz, HT40: 0 fastcc: 1
[ 2515.269035] ath: phy3: Set power: 15
[ 2515.380022] ath: phy3: Set channel: 5300 MHz width: 0
[ 2515.380170] ath: phy3: Reset to 5300 MHz, HT40: 0 fastcc: 1
[ 2515.492092] ath: phy3: Set channel: 5320 MHz width: 0
[ 2515.492230] ath: phy3: Reset to 5320 MHz, HT40: 0 fastcc: 1
[ 2515.604144] ath: phy3: Set channel: 5500 MHz width: 0
[ 2515.604273] ath: phy3: Reset to 5500 MHz, HT40: 0 fastcc: 1
[ 2515.605193] ath: phy3: Set power: 16
[ 2515.716200] ath: phy3: Set channel: 5520 MHz width: 0
[ 2515.716328] ath: phy3: Reset to 5520 MHz, HT40: 0 fastcc: 1
[ 2515.717279] ath: phy3: Set power: 17
[ 2515.828257] ath: phy3: Set channel: 5540 MHz width: 0
[ 2515.828419] ath: phy3: Reset to 5540 MHz, HT40: 0 fastcc: 1
[ 2515.940245] ath: phy3: Set channel: 5560 MHz width: 0
[ 2515.940383] ath: phy3: Reset to 5560 MHz, HT40: 0 fastcc: 1
[ 2516.052352] ath: phy3: Set channel: 5580 MHz width: 0
[ 2516.052485] ath: phy3: Reset to 5580 MHz, HT40: 0 fastcc: 1
[ 2516.164412] ath: phy3: Set channel: 5600 MHz width: 0
[ 2516.164543] ath: phy3: Reset to 5600 MHz, HT40: 0 fastcc: 1
[ 2516.276455] ath: phy3: Set channel: 5620 MHz width: 0
[ 2516.276592] ath: phy3: Reset to 5620 MHz, HT40: 0 fastcc: 1
[ 2516.388507] ath: phy3: Set channel: 5640 MHz width: 0
[ 2516.388645] ath: phy3: Reset to 5640 MHz, HT40: 0 fastcc: 1
[ 2516.500556] ath: phy3: Set channel: 5660 MHz width: 0
[ 2516.500690] ath: phy3: Reset to 5660 MHz, HT40: 0 fastcc: 1
[ 2516.612608] ath: phy3: Set channel: 5680 MHz width: 0
[ 2516.612733] ath: phy3: Reset to 5680 MHz, HT40: 0 fastcc: 1
[ 2516.724662] ath: phy3: Set channel: 5700 MHz width: 0
[ 2516.724802] ath: phy3: Reset to 5700 MHz, HT40: 0 fastcc: 1
[ 2516.725720] ath: phy3: Set power: 16
[ 2516.836717] ath: phy3: Set channel: 5745 MHz width: 0
[ 2516.836856] ath: phy3: Reset to 5745 MHz, HT40: 0 fastcc: 1
[ 2516.837771] ath: phy3: Set power: 17
[ 2516.948723] ath: phy3: Set channel: 5765 MHz width: 0
[ 2516.948870] ath: phy3: Reset to 5765 MHz, HT40: 0 fastcc: 1
[ 2517.060762] ath: phy3: Set channel: 5785 MHz width: 0
[ 2517.060893] ath: phy3: Reset to 5785 MHz, HT40: 0 fastcc: 1
[ 2517.172853] ath: phy3: Set channel: 5805 MHz width: 0
[ 2517.173019] ath: phy3: Reset to 5805 MHz, HT40: 0 fastcc: 1
[ 2517.284920] ath: phy3: Set channel: 5825 MHz width: 0
[ 2517.285058] ath: phy3: Reset to 5825 MHz, HT40: 0 fastcc: 1
[ 2517.396981] ath: phy3: Set channel: 2412 MHz width: 0
[ 2517.397120] ath: phy3: Reset to 2412 MHz, HT40: 0 fastcc: 0
[ 2517.397493] wlan11: authenticate with 90:f6:52:ff:d3:85
[ 2517.401284] ath: phy3: Set power: 16
[ 2517.401319] ath: phy3: Set HW RX filter: 0x207
[ 2517.401353] ath: phy3: Set channel: 2437 MHz width: 2
[ 2517.401490] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2517.407648] ath: phy3: Set power: 17
[ 2517.407716] wlan11: send auth to 90:f6:52:ff:d3:85 (try 1/3)
[ 2517.410057] wlan11: authenticated
[ 2517.410954] wlan11: associate with 90:f6:52:ff:d3:85 (try 1/3)
[ 2517.414675] wlan11: RX AssocResp from 90:f6:52:ff:d3:85 (capab=0x431 status=0 aid=2)
[ 2517.414686] ath: phy3: Configure tx [queue/halq] [2/2], aifs: 3, cw_min: 15, cw_max: 1023, txop: 0
[ 2517.414690] ath: phy3: Configure tx [queue/halq] [3/3], aifs: 7, cw_min: 15, cw_max: 1023, txop: 0
[ 2517.414694] ath: phy3: Configure tx [queue/halq] [1/1], aifs: 2, cw_min: 7, cw_max: 15, txop: 94
[ 2517.414698] ath: phy3: Configure tx [queue/halq] [0/0], aifs: 2, cw_min: 3, cw_max: 7, txop: 47
[ 2517.414702] ath: phy3: BSSID 90:f6:52:ff:d3:85 Changed ASSOC 1
[ 2517.414705] ath: phy3: Primary Station interface: 68:94:23:16:16:75, BSSID: 90:f6:52:ff:d3:85
[ 2517.414725] wlan11: associated
[ 2517.414734] IPv6: ADDRCONF(NETDEV_CHANGE): wlan11: link becomes ready
[ 2517.415043] cfg80211: Calling CRDA for country: DE
[ 2517.415071] ath: phy3: Set HW RX filter: 0x607
[ 2517.417500] ath: EEPROM regdomain: 0x8114
[ 2517.417502] ath: EEPROM indicates we should expect a country code
[ 2517.417503] ath: doing EEPROM country->regdmn map search
[ 2517.417505] ath: country maps to regdmn code: 0x37
[ 2517.417506] ath: Country alpha2 being used: DE
[ 2517.417507] ath: Regpair used: 0x37
[ 2517.417508] ath: regdomain 0x8114 dynamically updated by country IE
[ 2517.417537] cfg80211: Regulatory domain changed to country: DE
[ 2517.417538] cfg80211: DFS Master region: unset
[ 2517.417539] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2517.417541] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2517.417542] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2517.417543] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2517.417545] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 2517.417546] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 2517.420943] ath: phy3: Set HW Key
[ 2517.421062] ath: phy3: Set HW Key
[ 2517.425901] ath: phy3: Set HW RX filter: 0x607
[ 2517.450020] ath: phy3: Set HW RX filter: 0x607
[ 2519.023942] ath: phy3: Set HW RX filter: 0x607
[ 2524.734736] ath: phy3: Set HW RX filter: 0x607
[ 2526.235659] ath: phy3: Set HW RX filter: 0x607
[ 2533.198074] ath: phy3: Set HW RX filter: 0x417
[ 2533.198089] ath: phy3: Set channel: 2412 MHz width: 0
[ 2533.198220] ath: phy3: Reset to 2412 MHz, HT40: 0 fastcc: 1
[ 2533.262294] ath: phy3: Set channel: 2417 MHz width: 0
[ 2533.262430] ath: phy3: Reset to 2417 MHz, HT40: 0 fastcc: 1
[ 2533.323303] ath: phy3: Set channel: 2437 MHz width: 2
[ 2533.323447] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2533.527684] ath: phy3: Set channel: 2422 MHz width: 0
[ 2533.527831] ath: phy3: Reset to 2422 MHz, HT40: 0 fastcc: 1
[ 2533.592474] ath: phy3: Set channel: 2427 MHz width: 0
[ 2533.592623] ath: phy3: Reset to 2427 MHz, HT40: 0 fastcc: 1
[ 2533.653469] ath: phy3: Set channel: 2437 MHz width: 2
[ 2533.653602] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2533.857854] ath: phy3: Set channel: 2432 MHz width: 0
[ 2533.858016] ath: phy3: Reset to 2432 MHz, HT40: 0 fastcc: 1
[ 2533.922609] ath: phy3: Set channel: 2437 MHz width: 2
[ 2533.922747] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2533.986611] ath: phy3: Set channel: 2437 MHz width: 2
[ 2533.986769] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2534.190965] ath: phy3: Set channel: 2442 MHz width: 0
[ 2534.191114] ath: phy3: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 2534.255739] ath: phy3: Set channel: 2447 MHz width: 0
[ 2534.255894] ath: phy3: Reset to 2447 MHz, HT40: 0 fastcc: 1
[ 2534.316762] ath: phy3: Set channel: 2437 MHz width: 2
[ 2534.316913] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2534.521141] ath: phy3: Set channel: 2452 MHz width: 0
[ 2534.521296] ath: phy3: Reset to 2452 MHz, HT40: 0 fastcc: 1
[ 2534.585914] ath: phy3: Set channel: 2457 MHz width: 0
[ 2534.586072] ath: phy3: Reset to 2457 MHz, HT40: 0 fastcc: 1
[ 2534.646929] ath: phy3: Set channel: 2437 MHz width: 2
[ 2534.647070] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2534.851327] ath: phy3: Set channel: 2462 MHz width: 0
[ 2534.851495] ath: phy3: Reset to 2462 MHz, HT40: 0 fastcc: 1
[ 2534.916083] ath: phy3: Set channel: 2437 MHz width: 2
[ 2534.916225] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2535.120415] ath: phy3: Set channel: 2467 MHz width: 0
[ 2535.120583] ath: phy3: Reset to 2467 MHz, HT40: 0 fastcc: 1
[ 2535.236186] ath: phy3: Set channel: 2437 MHz width: 2
[ 2535.236339] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2535.440568] ath: phy3: Set channel: 2472 MHz width: 0
[ 2535.440747] ath: phy3: Reset to 2472 MHz, HT40: 0 fastcc: 1
[ 2535.495284] ath: phy3: BB_WATCHDOG: Skipping interrupts
[ 2535.495452] ath: phy3: Reset to 2472 MHz, HT40: 0 fastcc: 0
[ 2535.556341] ath: phy3: Set channel: 2437 MHz width: 2
[ 2535.556494] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2535.760712] ath: phy3: Set channel: 5180 MHz width: 0
[ 2535.760848] ath: phy3: Reset to 5180 MHz, HT40: 0 fastcc: 1
[ 2535.876499] ath: phy3: Set channel: 2437 MHz width: 2
[ 2535.876636] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2536.081183] ath: phy3: Set channel: 5200 MHz width: 0
[ 2536.081317] ath: phy3: Reset to 5200 MHz, HT40: 0 fastcc: 1
[ 2536.196656] ath: phy3: Set channel: 2437 MHz width: 2
[ 2536.196816] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2536.401019] ath: phy3: Set channel: 5220 MHz width: 0
[ 2536.401168] ath: phy3: Reset to 5220 MHz, HT40: 0 fastcc: 1
[ 2536.516808] ath: phy3: Set channel: 2437 MHz width: 2
[ 2536.516969] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2536.721143] ath: phy3: Set channel: 5240 MHz width: 0
[ 2536.721287] ath: phy3: Reset to 5240 MHz, HT40: 0 fastcc: 1
[ 2536.836942] ath: phy3: Set channel: 2437 MHz width: 2
[ 2536.837096] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2537.041303] ath: phy3: Set channel: 5260 MHz width: 0
[ 2537.041438] ath: phy3: Reset to 5260 MHz, HT40: 0 fastcc: 1
[ 2537.157047] ath: phy3: Set channel: 2437 MHz width: 2
[ 2537.157199] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2537.361459] ath: phy3: Set channel: 5280 MHz width: 0
[ 2537.361606] ath: phy3: Reset to 5280 MHz, HT40: 0 fastcc: 1
[ 2537.477222] ath: phy3: Set channel: 2437 MHz width: 2
[ 2537.477375] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2537.681559] ath: phy3: Set channel: 5300 MHz width: 0
[ 2537.681693] ath: phy3: Reset to 5300 MHz, HT40: 0 fastcc: 1
[ 2537.797397] ath: phy3: Set channel: 2437 MHz width: 2
[ 2537.797550] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2538.001724] ath: phy3: Set channel: 5320 MHz width: 0
[ 2538.001863] ath: phy3: Reset to 5320 MHz, HT40: 0 fastcc: 1
[ 2538.117537] ath: phy3: Set channel: 2437 MHz width: 2
[ 2538.117689] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2538.321874] ath: phy3: Set channel: 5500 MHz width: 0
[ 2538.322042] ath: phy3: Reset to 5500 MHz, HT40: 0 fastcc: 1
[ 2538.437685] ath: phy3: Set channel: 2437 MHz width: 2
[ 2538.437836] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2538.642011] ath: phy3: Set channel: 5520 MHz width: 0
[ 2538.642136] ath: phy3: Reset to 5520 MHz, HT40: 0 fastcc: 1
[ 2538.757829] ath: phy3: Set channel: 2437 MHz width: 2
[ 2538.757963] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2538.962159] ath: phy3: Set channel: 5540 MHz width: 0
[ 2538.962324] ath: phy3: Reset to 5540 MHz, HT40: 0 fastcc: 1
[ 2539.077968] ath: phy3: Set channel: 2437 MHz width: 2
[ 2539.078124] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2539.282296] ath: phy3: Set channel: 5560 MHz width: 0
[ 2539.282432] ath: phy3: Reset to 5560 MHz, HT40: 0 fastcc: 1
[ 2539.398124] ath: phy3: Set channel: 2437 MHz width: 2
[ 2539.398261] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2539.602460] ath: phy3: Set channel: 5580 MHz width: 0
[ 2539.602601] ath: phy3: Reset to 5580 MHz, HT40: 0 fastcc: 1
[ 2539.718275] ath: phy3: Set channel: 2437 MHz width: 2
[ 2539.718411] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2539.922618] ath: phy3: Set channel: 5600 MHz width: 0
[ 2539.922762] ath: phy3: Reset to 5600 MHz, HT40: 0 fastcc: 1
[ 2540.038422] ath: phy3: Set channel: 2437 MHz width: 2
[ 2540.038571] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2540.242743] ath: phy3: Set channel: 5620 MHz width: 0
[ 2540.242875] ath: phy3: Reset to 5620 MHz, HT40: 0 fastcc: 1
[ 2540.358550] ath: phy3: Set channel: 2437 MHz width: 2
[ 2540.358703] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2540.562910] ath: phy3: Set channel: 5640 MHz width: 0
[ 2540.563032] ath: phy3: Reset to 5640 MHz, HT40: 0 fastcc: 1
[ 2540.678665] ath: phy3: Set channel: 2437 MHz width: 2
[ 2540.678807] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2540.883033] ath: phy3: Set channel: 5660 MHz width: 0
[ 2540.883176] ath: phy3: Reset to 5660 MHz, HT40: 0 fastcc: 1
[ 2540.998865] ath: phy3: Set channel: 2437 MHz width: 2
[ 2540.999004] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2541.203198] ath: phy3: Set channel: 5680 MHz width: 0
[ 2541.203328] ath: phy3: Reset to 5680 MHz, HT40: 0 fastcc: 1
[ 2541.319000] ath: phy3: Set channel: 2437 MHz width: 2
[ 2541.319148] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2541.523366] ath: phy3: Set channel: 5700 MHz width: 0
[ 2541.523506] ath: phy3: Reset to 5700 MHz, HT40: 0 fastcc: 1
[ 2541.639157] ath: phy3: Set channel: 2437 MHz width: 2
[ 2541.639296] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2541.643799] ath: phy3: Set HW RX filter: 0x607
[ 2576.219557] ath: phy3: Set HW RX filter: 0x417
[ 2576.219586] ath: phy3: Set channel: 2412 MHz width: 0
[ 2576.219722] ath: phy3: Reset to 2412 MHz, HT40: 0 fastcc: 1
[ 2576.284133] ath: phy3: Set channel: 2417 MHz width: 0
[ 2576.284275] ath: phy3: Reset to 2417 MHz, HT40: 0 fastcc: 1
[ 2576.345171] ath: phy3: Set channel: 2437 MHz width: 2
[ 2576.345318] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2576.549482] ath: phy3: Set channel: 2422 MHz width: 0
[ 2576.549616] ath: phy3: Reset to 2422 MHz, HT40: 0 fastcc: 1
[ 2576.614304] ath: phy3: Set channel: 2427 MHz width: 0
[ 2576.614443] ath: phy3: Reset to 2427 MHz, HT40: 0 fastcc: 1
[ 2576.675308] ath: phy3: Set channel: 2437 MHz width: 2
[ 2576.675453] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2576.879713] ath: phy3: Set channel: 2432 MHz width: 0
[ 2576.879868] ath: phy3: Reset to 2432 MHz, HT40: 0 fastcc: 1
[ 2576.944466] ath: phy3: Set channel: 2437 MHz width: 2
[ 2576.944611] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2577.008483] ath: phy3: Set channel: 2437 MHz width: 2
[ 2577.008611] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2577.213369] ath: phy3: Set channel: 2442 MHz width: 0
[ 2577.213501] ath: phy3: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 2577.277603] ath: phy3: Set channel: 2447 MHz width: 0
[ 2577.277757] ath: phy3: Reset to 2447 MHz, HT40: 0 fastcc: 1
[ 2577.338634] ath: phy3: Set channel: 2437 MHz width: 2
[ 2577.338792] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2577.542998] ath: phy3: Set channel: 2452 MHz width: 0
[ 2577.543143] ath: phy3: Reset to 2452 MHz, HT40: 0 fastcc: 1
[ 2577.607771] ath: phy3: Set channel: 2457 MHz width: 0
[ 2577.607906] ath: phy3: Reset to 2457 MHz, HT40: 0 fastcc: 1
[ 2577.668786] ath: phy3: Set channel: 2437 MHz width: 2
[ 2577.668923] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2577.873133] ath: phy3: Set channel: 2462 MHz width: 0
[ 2577.873269] ath: phy3: Reset to 2462 MHz, HT40: 0 fastcc: 1
[ 2577.937877] ath: phy3: Set channel: 2437 MHz width: 2
[ 2577.938028] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2578.142256] ath: phy3: Set channel: 2467 MHz width: 0
[ 2578.142396] ath: phy3: Reset to 2467 MHz, HT40: 0 fastcc: 1
[ 2578.258039] ath: phy3: Set channel: 2437 MHz width: 2
[ 2578.258194] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2578.462413] ath: phy3: Set channel: 2472 MHz width: 0
[ 2578.462554] ath: phy3: Reset to 2472 MHz, HT40: 0 fastcc: 1
[ 2578.578208] ath: phy3: Set channel: 2437 MHz width: 2
[ 2578.578356] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2578.782552] ath: phy3: Set channel: 5180 MHz width: 0
[ 2578.782686] ath: phy3: Reset to 5180 MHz, HT40: 0 fastcc: 1
[ 2578.898343] ath: phy3: Set channel: 2437 MHz width: 2
[ 2578.898499] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2579.102696] ath: phy3: Set channel: 5200 MHz width: 0
[ 2579.102844] ath: phy3: Reset to 5200 MHz, HT40: 0 fastcc: 1
[ 2579.218512] ath: phy3: Set channel: 2437 MHz width: 2
[ 2579.218672] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2579.422846] ath: phy3: Set channel: 5220 MHz width: 0
[ 2579.422983] ath: phy3: Reset to 5220 MHz, HT40: 0 fastcc: 1
[ 2579.538590] ath: phy3: Set channel: 2437 MHz width: 2
[ 2579.538762] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2579.742990] ath: phy3: Set channel: 5240 MHz width: 0
[ 2579.743121] ath: phy3: Reset to 5240 MHz, HT40: 0 fastcc: 1
[ 2579.858782] ath: phy3: Set channel: 2437 MHz width: 2
[ 2579.858927] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2580.063126] ath: phy3: Set channel: 5260 MHz width: 0
[ 2580.063266] ath: phy3: Reset to 5260 MHz, HT40: 0 fastcc: 1
[ 2580.178946] ath: phy3: Set channel: 2437 MHz width: 2
[ 2580.179084] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2580.383303] ath: phy3: Set channel: 5280 MHz width: 0
[ 2580.383446] ath: phy3: Reset to 5280 MHz, HT40: 0 fastcc: 1
[ 2580.499086] ath: phy3: Set channel: 2437 MHz width: 2
[ 2580.499244] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2580.703434] ath: phy3: Set channel: 5300 MHz width: 0
[ 2580.703572] ath: phy3: Reset to 5300 MHz, HT40: 0 fastcc: 1
[ 2580.819231] ath: phy3: Set channel: 2437 MHz width: 2
[ 2580.819388] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2581.023594] ath: phy3: Set channel: 5320 MHz width: 0
[ 2581.023735] ath: phy3: Reset to 5320 MHz, HT40: 0 fastcc: 1
[ 2581.139392] ath: phy3: Set channel: 2437 MHz width: 2
[ 2581.139548] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2581.343756] ath: phy3: Set channel: 5500 MHz width: 0
[ 2581.343896] ath: phy3: Reset to 5500 MHz, HT40: 0 fastcc: 1
[ 2581.459519] ath: phy3: Set channel: 2437 MHz width: 2
[ 2581.459672] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2581.663851] ath: phy3: Set channel: 5520 MHz width: 0
[ 2581.663986] ath: phy3: Reset to 5520 MHz, HT40: 0 fastcc: 1
[ 2581.779673] ath: phy3: Set channel: 2437 MHz width: 2
[ 2581.779827] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2581.984057] ath: phy3: Set channel: 5540 MHz width: 0
[ 2581.984199] ath: phy3: Reset to 5540 MHz, HT40: 0 fastcc: 1
[ 2582.099831] ath: phy3: Set channel: 2437 MHz width: 2
[ 2582.099968] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2582.304159] ath: phy3: Set channel: 5560 MHz width: 0
[ 2582.304294] ath: phy3: Reset to 5560 MHz, HT40: 0 fastcc: 1
[ 2582.419982] ath: phy3: Set channel: 2437 MHz width: 2
[ 2582.420119] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2582.624316] ath: phy3: Set channel: 5580 MHz width: 0
[ 2582.624453] ath: phy3: Reset to 5580 MHz, HT40: 0 fastcc: 1
[ 2582.740120] ath: phy3: Set channel: 2437 MHz width: 2
[ 2582.740280] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2582.944379] ath: phy3: Set channel: 5600 MHz width: 0
[ 2582.944509] ath: phy3: Reset to 5600 MHz, HT40: 0 fastcc: 1
[ 2583.060260] ath: phy3: Set channel: 2437 MHz width: 2
[ 2583.060408] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2583.264496] ath: phy3: Set channel: 5620 MHz width: 0
[ 2583.264638] ath: phy3: Reset to 5620 MHz, HT40: 0 fastcc: 1
[ 2583.380406] ath: phy3: Set channel: 2437 MHz width: 2
[ 2583.380557] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2583.584759] ath: phy3: Set channel: 5640 MHz width: 0
[ 2583.584895] ath: phy3: Reset to 5640 MHz, HT40: 0 fastcc: 1
[ 2583.700553] ath: phy3: Set channel: 2437 MHz width: 2
[ 2583.700704] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2583.904911] ath: phy3: Set channel: 5660 MHz width: 0
[ 2583.905049] ath: phy3: Reset to 5660 MHz, HT40: 0 fastcc: 1
[ 2584.020700] ath: phy3: Set channel: 2437 MHz width: 2
[ 2584.020848] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2584.225036] ath: phy3: Set channel: 5680 MHz width: 0
[ 2584.225174] ath: phy3: Reset to 5680 MHz, HT40: 0 fastcc: 1
[ 2584.340863] ath: phy3: Set channel: 2437 MHz width: 2
[ 2584.341012] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2584.545209] ath: phy3: Set channel: 5700 MHz width: 0
[ 2584.545344] ath: phy3: Reset to 5700 MHz, HT40: 0 fastcc: 1
[ 2584.661014] ath: phy3: Set channel: 2437 MHz width: 2
[ 2584.661176] ath: phy3: Reset to 2437 MHz, HT40: 1 fastcc: 0
[ 2584.665753] ath: phy3: Set HW RX filter: 0x607
[ 2602.000429] wlan11: deauthenticating from 90:f6:52:ff:d3:85 by local choice (reason=3)
[ 2602.001369] ath: phy3: Set HW Key
[ 2602.001443] ath: phy3: BSSID 00:00:00:00:00:00 Changed ASSOC 0
[ 2602.001462] ath: phy3: Configure tx [queue/halq] [0/0], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 2602.001467] ath: phy3: Configure tx [queue/halq] [1/1], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 2602.001471] ath: phy3: Configure tx [queue/halq] [2/2], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 2602.001474] ath: phy3: Configure tx [queue/halq] [3/3], aifs: 2, cw_min: 15, cw_max: 1023, txop: 0
[ 2602.001480] ath: phy3: Set channel: 2437 MHz width: 0
[ 2602.001609] ath: phy3: Reset to 2437 MHz, HT40: 0 fastcc: 0
[ 2602.007520] ath: phy3: Set power: 20
[ 2602.007576] ath: phy3: Set HW Key
[ 2602.007638] cfg80211: Calling CRDA to update world regulatory domain
[ 2602.008284] ath: phy3: Set HW RX filter: 0x207
[ 2602.009476] ath: phy3: Set HW RX filter: 0x207
[ 2602.009940] ath: phy3: Set HW RX filter: 0x207
[ 2602.011412] cfg80211: World regulatory domain updated:
[ 2602.011416] cfg80211: DFS Master region: unset
[ 2602.011417] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2602.011419] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2602.011421] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2602.011422] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2602.011424] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2602.011425] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2602.060918] ath: phy3: Set power: 17
[ 2602.060938] ath: phy3: Set HW RX filter: 0x17
[ 2602.062545] ath: phy3: Set channel: 2412 MHz width: 0
[ 2602.062689] ath: phy3: Reset to 2412 MHz, HT40: 0 fastcc: 1
[ 2602.063613] ath: phy3: Set power: 16
[ 2602.123022] ath: phy3: Set channel: 2417 MHz width: 0
[ 2602.123204] ath: phy3: Reset to 2417 MHz, HT40: 0 fastcc: 1
[ 2602.124127] ath: phy3: Set power: 17
[ 2602.184114] ath: phy3: Set channel: 2422 MHz width: 0
[ 2602.184256] ath: phy3: Reset to 2422 MHz, HT40: 0 fastcc: 1
[ 2602.245144] ath: phy3: Set channel: 2427 MHz width: 0
[ 2602.245291] ath: phy3: Reset to 2427 MHz, HT40: 0 fastcc: 1
[ 2602.306108] ath: phy3: Set channel: 2432 MHz width: 0
[ 2602.306252] ath: phy3: Reset to 2432 MHz, HT40: 0 fastcc: 1
[ 2602.367170] ath: phy3: Set channel: 2437 MHz width: 0
[ 2602.367351] ath: phy3: Reset to 2437 MHz, HT40: 0 fastcc: 0
[ 2602.431214] ath: phy3: Set channel: 2442 MHz width: 0
[ 2602.431353] ath: phy3: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 2602.492232] ath: phy3: Set channel: 2447 MHz width: 0
[ 2602.492365] ath: phy3: Reset to 2447 MHz, HT40: 0 fastcc: 1
[ 2602.553276] ath: phy3: Set channel: 2452 MHz width: 0
[ 2602.553405] ath: phy3: Reset to 2452 MHz, HT40: 0 fastcc: 1
[ 2602.614304] ath: phy3: Set channel: 2457 MHz width: 0
[ 2602.614441] ath: phy3: Reset to 2457 MHz, HT40: 0 fastcc: 1
[ 2602.615405] ath: phy3: Set power: 16
[ 2602.675324] ath: phy3: Set channel: 2462 MHz width: 0
[ 2602.675458] ath: phy3: Reset to 2462 MHz, HT40: 0 fastcc: 1
[ 2602.676454] ath: phy3: Set power: 17
[ 2602.736356] ath: phy3: Set channel: 2467 MHz width: 0
[ 2602.736490] ath: phy3: Reset to 2467 MHz, HT40: 0 fastcc: 1
[ 2602.848394] ath: phy3: Set channel: 2472 MHz width: 0
[ 2602.848560] ath: phy3: Reset to 2472 MHz, HT40: 0 fastcc: 1
[ 2602.849595] ath: phy3: Set power: 16
[ 2602.960458] ath: phy3: Set channel: 5180 MHz width: 0
[ 2602.960599] ath: phy3: Reset to 5180 MHz, HT40: 0 fastcc: 1
[ 2602.965592] ath: phy3: Set power: 15
[ 2603.076463] ath: phy3: Set channel: 5200 MHz width: 0
[ 2603.076602] ath: phy3: Reset to 5200 MHz, HT40: 0 fastcc: 1
[ 2603.188567] ath: phy3: Set channel: 5220 MHz width: 0
[ 2603.188701] ath: phy3: Reset to 5220 MHz, HT40: 0 fastcc: 1
[ 2603.300639] ath: phy3: Set channel: 5240 MHz width: 0
[ 2603.300778] ath: phy3: Reset to 5240 MHz, HT40: 0 fastcc: 1
[ 2603.412669] ath: phy3: Set channel: 5260 MHz width: 0
[ 2603.412808] ath: phy3: Reset to 5260 MHz, HT40: 0 fastcc: 1
[ 2603.413727] ath: phy3: Set power: 17
[ 2603.524739] ath: phy3: Set channel: 5280 MHz width: 0
[ 2603.524895] ath: phy3: Reset to 5280 MHz, HT40: 0 fastcc: 1
[ 2603.525834] ath: phy3: Set power: 15
[ 2603.636767] ath: phy3: Set channel: 5300 MHz width: 0
[ 2603.636902] ath: phy3: Reset to 5300 MHz, HT40: 0 fastcc: 1
[ 2603.748827] ath: phy3: Set channel: 5320 MHz width: 0
[ 2603.748977] ath: phy3: Reset to 5320 MHz, HT40: 0 fastcc: 1
[ 2603.860822] ath: phy3: Set channel: 5500 MHz width: 0
[ 2603.860960] ath: phy3: Reset to 5500 MHz, HT40: 0 fastcc: 1
[ 2603.861884] ath: phy3: Set power: 16
[ 2603.972929] ath: phy3: Set channel: 5520 MHz width: 0
[ 2603.973068] ath: phy3: Reset to 5520 MHz, HT40: 0 fastcc: 1
[ 2603.974037] ath: phy3: Set power: 17
[ 2604.084931] ath: phy3: Set channel: 5540 MHz width: 0
[ 2604.085074] ath: phy3: Reset to 5540 MHz, HT40: 0 fastcc: 1
[ 2604.197038] ath: phy3: Set channel: 5560 MHz width: 0
[ 2604.197174] ath: phy3: Reset to 5560 MHz, HT40: 0 fastcc: 1
[ 2604.309029] ath: phy3: Set channel: 5580 MHz width: 0
[ 2604.309167] ath: phy3: Reset to 5580 MHz, HT40: 0 fastcc: 1
[ 2604.421151] ath: phy3: Set channel: 5600 MHz width: 0
[ 2604.421299] ath: phy3: Reset to 5600 MHz, HT40: 0 fastcc: 1
[ 2604.533127] ath: phy3: Set channel: 5620 MHz width: 0
[ 2604.533265] ath: phy3: Reset to 5620 MHz, HT40: 0 fastcc: 1
[ 2604.645238] ath: phy3: Set channel: 5640 MHz width: 0
[ 2604.645374] ath: phy3: Reset to 5640 MHz, HT40: 0 fastcc: 1
[ 2604.757295] ath: phy3: Set channel: 5660 MHz width: 0
[ 2604.757440] ath: phy3: Reset to 5660 MHz, HT40: 0 fastcc: 1
[ 2604.869342] ath: phy3: Set channel: 5680 MHz width: 0
[ 2604.869495] ath: phy3: Reset to 5680 MHz, HT40: 0 fastcc: 1
[ 2604.981394] ath: phy3: Set channel: 5700 MHz width: 0
[ 2604.981526] ath: phy3: Reset to 5700 MHz, HT40: 0 fastcc: 1
[ 2604.982445] ath: phy3: Set power: 16
[ 2605.093442] ath: phy3: Set channel: 5745 MHz width: 0
[ 2605.093583] ath: phy3: Reset to 5745 MHz, HT40: 0 fastcc: 1
[ 2605.094499] ath: phy3: Set power: 17
[ 2605.205496] ath: phy3: Set channel: 5765 MHz width: 0
[ 2605.205635] ath: phy3: Reset to 5765 MHz, HT40: 0 fastcc: 1
[ 2605.317517] ath: phy3: Set channel: 5785 MHz width: 0
[ 2605.317658] ath: phy3: Reset to 5785 MHz, HT40: 0 fastcc: 1
[ 2605.429604] ath: phy3: Set channel: 5805 MHz width: 0
[ 2605.429741] ath: phy3: Reset to 5805 MHz, HT40: 0 fastcc: 1
[ 2605.541657] ath: phy3: Set channel: 5825 MHz width: 0
[ 2605.541798] ath: phy3: Reset to 5825 MHz, HT40: 0 fastcc: 1
[ 2605.653706] ath: phy3: Set channel: 2437 MHz width: 0
[ 2605.653854] ath: phy3: Reset to 2437 MHz, HT40: 0 fastcc: 0
[ 2605.654146] wlan11: authenticate with 90:f6:52:ff:d3:86
[ 2605.658025] ath: phy3: Set HW RX filter: 0x207
[ 2605.658059] ath: phy3: Set channel: 5180 MHz width: 2
[ 2605.658191] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2605.664412] ath: phy3: Set power: 15
[ 2605.664490] wlan11: direct probe to 90:f6:52:ff:d3:86 (try 1/3)
[ 2605.864798] wlan11: send auth to 90:f6:52:ff:d3:86 (try 2/3)
[ 2605.866348] wlan11: authenticated
[ 2605.866764] wlan11: associate with 90:f6:52:ff:d3:86 (try 1/3)
[ 2605.869212] wlan11: RX AssocResp from 90:f6:52:ff:d3:86 (capab=0x11 status=0 aid=1)
[ 2605.869226] ath: phy3: Configure tx [queue/halq] [2/2], aifs: 3, cw_min: 15, cw_max: 1023, txop: 0
[ 2605.869231] ath: phy3: Configure tx [queue/halq] [3/3], aifs: 7, cw_min: 15, cw_max: 1023, txop: 0
[ 2605.869236] ath: phy3: Configure tx [queue/halq] [1/1], aifs: 2, cw_min: 7, cw_max: 15, txop: 94
[ 2605.869240] ath: phy3: Configure tx [queue/halq] [0/0], aifs: 2, cw_min: 3, cw_max: 7, txop: 47
[ 2605.869245] ath: phy3: BSSID 90:f6:52:ff:d3:86 Changed ASSOC 1
[ 2605.869247] ath: phy3: Primary Station interface: 68:94:23:16:16:75, BSSID: 90:f6:52:ff:d3:86
[ 2605.869270] wlan11: associated
[ 2605.869381] cfg80211: Calling CRDA for country: DE
[ 2605.871812] ath: EEPROM regdomain: 0x8114
[ 2605.871815] ath: EEPROM indicates we should expect a country code
[ 2605.871816] ath: doing EEPROM country->regdmn map search
[ 2605.871817] ath: country maps to regdmn code: 0x37
[ 2605.871819] ath: Country alpha2 being used: DE
[ 2605.871820] ath: Regpair used: 0x37
[ 2605.871821] ath: regdomain 0x8114 dynamically updated by country IE
[ 2605.871850] cfg80211: Regulatory domain changed to country: DE
[ 2605.871851] cfg80211: DFS Master region: unset
[ 2605.871853] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2605.871854] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2605.871856] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2605.871857] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2605.871859] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 2605.871860] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 2605.875213] ath: phy3: Set HW Key
[ 2605.875331] ath: phy3: Set HW Key
[ 2605.880303] ath: phy3: Set HW RX filter: 0x607
[ 2605.882549] ath: phy3: Set HW RX filter: 0x607
[ 2605.906969] ath: phy3: Set HW RX filter: 0x607
[ 2607.760940] ath: phy3: Set HW RX filter: 0x607
[ 2612.319448] ath: phy3: Set HW RX filter: 0x607
[ 2613.403771] ath: phy3: Set HW RX filter: 0x607
[ 2628.241718] ath: phy3: Set HW RX filter: 0x417
[ 2628.241731] ath: phy3: Set channel: 2412 MHz width: 0
[ 2628.241878] ath: phy3: Reset to 2412 MHz, HT40: 0 fastcc: 1
[ 2628.306137] ath: phy3: Set channel: 2417 MHz width: 0
[ 2628.306279] ath: phy3: Reset to 2417 MHz, HT40: 0 fastcc: 1
[ 2628.367184] ath: phy3: Set channel: 5180 MHz width: 2
[ 2628.367319] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2628.571538] ath: phy3: Set channel: 2422 MHz width: 0
[ 2628.571683] ath: phy3: Reset to 2422 MHz, HT40: 0 fastcc: 1
[ 2628.636309] ath: phy3: Set channel: 5180 MHz width: 2
[ 2628.636448] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2628.840671] ath: phy3: Set channel: 2427 MHz width: 0
[ 2628.840818] ath: phy3: Reset to 2427 MHz, HT40: 0 fastcc: 1
[ 2628.905417] ath: phy3: Set channel: 2432 MHz width: 0
[ 2628.905564] ath: phy3: Reset to 2432 MHz, HT40: 0 fastcc: 1
[ 2628.966476] ath: phy3: Set channel: 5180 MHz width: 2
[ 2628.966625] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2629.170812] ath: phy3: Set channel: 2437 MHz width: 0
[ 2629.170949] ath: phy3: Reset to 2437 MHz, HT40: 0 fastcc: 1
[ 2629.235581] ath: phy3: Set channel: 2442 MHz width: 0
[ 2629.235713] ath: phy3: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 2629.296595] ath: phy3: Set channel: 5180 MHz width: 2
[ 2629.296745] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2629.500976] ath: phy3: Set channel: 2447 MHz width: 0
[ 2629.501121] ath: phy3: Reset to 2447 MHz, HT40: 0 fastcc: 1
[ 2629.565742] ath: phy3: Set channel: 2452 MHz width: 0
[ 2629.565877] ath: phy3: Reset to 2452 MHz, HT40: 0 fastcc: 1
[ 2629.626763] ath: phy3: Set channel: 5180 MHz width: 2
[ 2629.626890] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2629.831045] ath: phy3: Set channel: 2457 MHz width: 0
[ 2629.831166] ath: phy3: Reset to 2457 MHz, HT40: 0 fastcc: 1
[ 2629.895888] ath: phy3: Set channel: 2462 MHz width: 0
[ 2629.896013] ath: phy3: Reset to 2462 MHz, HT40: 0 fastcc: 1
[ 2629.956933] ath: phy3: Set channel: 5180 MHz width: 2
[ 2629.957075] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2630.161243] ath: phy3: Set channel: 2467 MHz width: 0
[ 2630.161387] ath: phy3: Reset to 2467 MHz, HT40: 0 fastcc: 1
[ 2630.277048] ath: phy3: Set channel: 5180 MHz width: 2
[ 2630.277198] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2630.481414] ath: phy3: Set channel: 2472 MHz width: 0
[ 2630.481553] ath: phy3: Reset to 2472 MHz, HT40: 0 fastcc: 1
[ 2630.536172] ath: phy3: BB_WATCHDOG: Skipping interrupts
[ 2630.536317] ath: phy3: Reset to 2472 MHz, HT40: 0 fastcc: 0
[ 2630.597199] ath: phy3: Set channel: 5180 MHz width: 2
[ 2630.597353] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2630.801579] ath: phy3: Set channel: 5180 MHz width: 2
[ 2630.801727] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2630.916377] ath: phy3: Set channel: 5180 MHz width: 2
[ 2630.916516] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2631.120724] ath: phy3: Set channel: 5200 MHz width: 0
[ 2631.120882] ath: phy3: Reset to 5200 MHz, HT40: 0 fastcc: 1
[ 2631.236507] ath: phy3: Set channel: 5180 MHz width: 2
[ 2631.236656] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2631.440868] ath: phy3: Set channel: 5220 MHz width: 0
[ 2631.441022] ath: phy3: Reset to 5220 MHz, HT40: 0 fastcc: 1
[ 2631.556659] ath: phy3: Set channel: 5180 MHz width: 2
[ 2631.556799] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2631.760989] ath: phy3: Set channel: 5240 MHz width: 0
[ 2631.761138] ath: phy3: Reset to 5240 MHz, HT40: 0 fastcc: 1
[ 2631.876806] ath: phy3: Set channel: 5180 MHz width: 2
[ 2631.876938] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2632.081158] ath: phy3: Set channel: 5260 MHz width: 0
[ 2632.081306] ath: phy3: Reset to 5260 MHz, HT40: 0 fastcc: 1
[ 2632.196954] ath: phy3: Set channel: 5180 MHz width: 2
[ 2632.197089] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2632.401308] ath: phy3: Set channel: 5280 MHz width: 0
[ 2632.401455] ath: phy3: Reset to 5280 MHz, HT40: 0 fastcc: 1
[ 2632.517097] ath: phy3: Set channel: 5180 MHz width: 2
[ 2632.517230] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2632.721453] ath: phy3: Set channel: 5300 MHz width: 0
[ 2632.721596] ath: phy3: Reset to 5300 MHz, HT40: 0 fastcc: 1
[ 2632.837243] ath: phy3: Set channel: 5180 MHz width: 2
[ 2632.837379] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2633.041616] ath: phy3: Set channel: 5320 MHz width: 0
[ 2633.041767] ath: phy3: Reset to 5320 MHz, HT40: 0 fastcc: 1
[ 2633.157409] ath: phy3: Set channel: 5180 MHz width: 2
[ 2633.157555] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2633.361736] ath: phy3: Set channel: 5500 MHz width: 0
[ 2633.361879] ath: phy3: Reset to 5500 MHz, HT40: 0 fastcc: 1
[ 2633.477543] ath: phy3: Set channel: 5180 MHz width: 2
[ 2633.477676] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2633.681897] ath: phy3: Set channel: 5520 MHz width: 0
[ 2633.682043] ath: phy3: Reset to 5520 MHz, HT40: 0 fastcc: 1
[ 2633.797689] ath: phy3: Set channel: 5180 MHz width: 2
[ 2633.797824] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2634.002045] ath: phy3: Set channel: 5540 MHz width: 0
[ 2634.002191] ath: phy3: Reset to 5540 MHz, HT40: 0 fastcc: 1
[ 2634.117840] ath: phy3: Set channel: 5180 MHz width: 2
[ 2634.117977] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2634.322190] ath: phy3: Set channel: 5560 MHz width: 0
[ 2634.322334] ath: phy3: Reset to 5560 MHz, HT40: 0 fastcc: 1
[ 2634.437982] ath: phy3: Set channel: 5180 MHz width: 2
[ 2634.438116] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2634.642342] ath: phy3: Set channel: 5580 MHz width: 0
[ 2634.642489] ath: phy3: Reset to 5580 MHz, HT40: 0 fastcc: 1
[ 2634.758133] ath: phy3: Set channel: 5180 MHz width: 2
[ 2634.758263] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2634.962362] ath: phy3: Set channel: 5600 MHz width: 0
[ 2634.962497] ath: phy3: Reset to 5600 MHz, HT40: 0 fastcc: 1
[ 2635.078265] ath: phy3: Set channel: 5180 MHz width: 2
[ 2635.078415] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2635.282631] ath: phy3: Set channel: 5620 MHz width: 0
[ 2635.282776] ath: phy3: Reset to 5620 MHz, HT40: 0 fastcc: 1
[ 2635.398415] ath: phy3: Set channel: 5180 MHz width: 2
[ 2635.398575] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2635.602762] ath: phy3: Set channel: 5640 MHz width: 0
[ 2635.602892] ath: phy3: Reset to 5640 MHz, HT40: 0 fastcc: 1
[ 2635.718579] ath: phy3: Set channel: 5180 MHz width: 2
[ 2635.718713] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2635.922932] ath: phy3: Set channel: 5660 MHz width: 0
[ 2635.923077] ath: phy3: Reset to 5660 MHz, HT40: 0 fastcc: 1
[ 2636.038728] ath: phy3: Set channel: 5180 MHz width: 2
[ 2636.038870] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2636.243090] ath: phy3: Set channel: 5680 MHz width: 0
[ 2636.243250] ath: phy3: Reset to 5680 MHz, HT40: 0 fastcc: 1
[ 2636.358875] ath: phy3: Set channel: 5180 MHz width: 2
[ 2636.359024] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2636.563226] ath: phy3: Set channel: 5700 MHz width: 0
[ 2636.563381] ath: phy3: Reset to 5700 MHz, HT40: 0 fastcc: 1
[ 2636.679028] ath: phy3: Set channel: 5180 MHz width: 2
[ 2636.679172] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2636.683640] ath: phy3: Set HW RX filter: 0x607
[ 2671.262584] ath: phy3: Set HW RX filter: 0x417
[ 2671.262610] ath: phy3: Set channel: 2412 MHz width: 0
[ 2671.262749] ath: phy3: Reset to 2412 MHz, HT40: 0 fastcc: 1
[ 2671.327010] ath: phy3: Set channel: 2417 MHz width: 0
[ 2671.327171] ath: phy3: Reset to 2417 MHz, HT40: 0 fastcc: 1
[ 2671.388031] ath: phy3: Set channel: 5180 MHz width: 2
[ 2671.388179] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2671.592398] ath: phy3: Set channel: 2422 MHz width: 0
[ 2671.592565] ath: phy3: Reset to 2422 MHz, HT40: 0 fastcc: 1
[ 2671.657137] ath: phy3: Set channel: 2427 MHz width: 0
[ 2671.657310] ath: phy3: Reset to 2427 MHz, HT40: 0 fastcc: 1
[ 2671.718182] ath: phy3: Set channel: 5180 MHz width: 2
[ 2671.718348] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2671.813207] rts51x: Command (unknown command) (16 bytes)
[ 2671.813216] rts51x:
[ 2671.813221] 85 08
[ 2671.813229] 0e 00
[ 2671.813235] 00 00
[ 2671.813240] 01 00
[ 2671.813245] 00 00
[ 2671.813250] 00 00
[ 2671.813256] 00 40
[ 2671.813261] ec 00
[ 2671.813267]
[ 2671.922677] ath: phy3: Set channel: 2432 MHz width: 0
[ 2671.922848] ath: phy3: Reset to 2432 MHz, HT40: 0 fastcc: 1
[ 2671.987303] ath: phy3: Set channel: 2437 MHz width: 0
[ 2671.987487] ath: phy3: Reset to 2437 MHz, HT40: 0 fastcc: 1
[ 2672.048331] ath: phy3: Set channel: 5180 MHz width: 2
[ 2672.048500] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2672.252699] ath: phy3: Set channel: 2442 MHz width: 0
[ 2672.252862] ath: phy3: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 2672.317467] ath: phy3: Set channel: 2447 MHz width: 0
[ 2672.317645] ath: phy3: Reset to 2447 MHz, HT40: 0 fastcc: 1
[ 2672.378476] ath: phy3: Set channel: 5180 MHz width: 2
[ 2672.378625] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2672.582875] ath: phy3: Set channel: 2452 MHz width: 0
[ 2672.583026] ath: phy3: Reset to 2452 MHz, HT40: 0 fastcc: 1
[ 2672.647636] ath: phy3: Set channel: 2457 MHz width: 0
[ 2672.647795] ath: phy3: Reset to 2457 MHz, HT40: 0 fastcc: 1
[ 2672.708633] ath: phy3: Set channel: 5180 MHz width: 2
[ 2672.708782] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2672.912959] ath: phy3: Set channel: 2462 MHz width: 0
[ 2672.913130] ath: phy3: Reset to 2462 MHz, HT40: 0 fastcc: 1
[ 2672.977769] ath: phy3: Set channel: 5180 MHz width: 2
[ 2672.977938] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2673.182193] ath: phy3: Set channel: 2467 MHz width: 0
[ 2673.182360] ath: phy3: Reset to 2467 MHz, HT40: 0 fastcc: 1
[ 2673.297913] ath: phy3: Set channel: 5180 MHz width: 2
[ 2673.298082] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2673.502311] ath: phy3: Set channel: 2472 MHz width: 0
[ 2673.502479] ath: phy3: Reset to 2472 MHz, HT40: 0 fastcc: 1
[ 2673.618066] ath: phy3: Set channel: 5180 MHz width: 2
[ 2673.618237] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2673.822434] ath: phy3: Set channel: 5180 MHz width: 2
[ 2673.822613] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2673.938210] ath: phy3: Set channel: 5180 MHz width: 2
[ 2673.938376] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2674.142570] ath: phy3: Set channel: 5200 MHz width: 0
[ 2674.142734] ath: phy3: Reset to 5200 MHz, HT40: 0 fastcc: 1
[ 2674.258351] ath: phy3: Set channel: 5180 MHz width: 2
[ 2674.258516] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2674.462777] ath: phy3: Set channel: 5220 MHz width: 0
[ 2674.462941] ath: phy3: Reset to 5220 MHz, HT40: 0 fastcc: 1
[ 2674.578503] ath: phy3: Set channel: 5180 MHz width: 2
[ 2674.578669] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2674.782867] ath: phy3: Set channel: 5240 MHz width: 0
[ 2674.783035] ath: phy3: Reset to 5240 MHz, HT40: 0 fastcc: 1
[ 2674.898652] ath: phy3: Set channel: 5180 MHz width: 2
[ 2674.898817] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2675.103013] ath: phy3: Set channel: 5260 MHz width: 0
[ 2675.103182] ath: phy3: Reset to 5260 MHz, HT40: 0 fastcc: 1
[ 2675.218792] ath: phy3: Set channel: 5180 MHz width: 2
[ 2675.218956] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2675.423156] ath: phy3: Set channel: 5280 MHz width: 0
[ 2675.423322] ath: phy3: Reset to 5280 MHz, HT40: 0 fastcc: 1
[ 2675.538955] ath: phy3: Set channel: 5180 MHz width: 2
[ 2675.539121] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2675.743355] ath: phy3: Set channel: 5300 MHz width: 0
[ 2675.743523] ath: phy3: Reset to 5300 MHz, HT40: 0 fastcc: 1
[ 2675.859126] ath: phy3: Set channel: 5180 MHz width: 2
[ 2675.859293] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2676.063440] ath: phy3: Set channel: 5320 MHz width: 0
[ 2676.063604] ath: phy3: Reset to 5320 MHz, HT40: 0 fastcc: 1
[ 2676.179238] ath: phy3: Set channel: 5180 MHz width: 2
[ 2676.179405] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2676.383657] ath: phy3: Set channel: 5500 MHz width: 0
[ 2676.383805] ath: phy3: Reset to 5500 MHz, HT40: 0 fastcc: 1
[ 2676.499389] ath: phy3: Set channel: 5180 MHz width: 2
[ 2676.499534] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2676.703746] ath: phy3: Set channel: 5520 MHz width: 0
[ 2676.703887] ath: phy3: Reset to 5520 MHz, HT40: 0 fastcc: 1
[ 2676.819543] ath: phy3: Set channel: 5180 MHz width: 2
[ 2676.819676] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2677.023908] ath: phy3: Set channel: 5540 MHz width: 0
[ 2677.024065] ath: phy3: Reset to 5540 MHz, HT40: 0 fastcc: 1
[ 2677.139655] ath: phy3: Set channel: 5180 MHz width: 2
[ 2677.139830] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2677.344056] ath: phy3: Set channel: 5560 MHz width: 0
[ 2677.344203] ath: phy3: Reset to 5560 MHz, HT40: 0 fastcc: 1
[ 2677.459844] ath: phy3: Set channel: 5180 MHz width: 2
[ 2677.459980] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2677.664199] ath: phy3: Set channel: 5580 MHz width: 0
[ 2677.664345] ath: phy3: Reset to 5580 MHz, HT40: 0 fastcc: 1
[ 2677.779976] ath: phy3: Set channel: 5180 MHz width: 2
[ 2677.780138] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2677.984335] ath: phy3: Set channel: 5600 MHz width: 0
[ 2677.984483] ath: phy3: Reset to 5600 MHz, HT40: 0 fastcc: 1
[ 2678.100134] ath: phy3: Set channel: 5180 MHz width: 2
[ 2678.100282] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2678.304456] ath: phy3: Set channel: 5620 MHz width: 0
[ 2678.304589] ath: phy3: Reset to 5620 MHz, HT40: 0 fastcc: 1
[ 2678.420281] ath: phy3: Set channel: 5180 MHz width: 2
[ 2678.420413] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2678.624644] ath: phy3: Set channel: 5640 MHz width: 0
[ 2678.624788] ath: phy3: Reset to 5640 MHz, HT40: 0 fastcc: 1
[ 2678.740433] ath: phy3: Set channel: 5180 MHz width: 2
[ 2678.740569] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2678.944757] ath: phy3: Set channel: 5660 MHz width: 0
[ 2678.944889] ath: phy3: Reset to 5660 MHz, HT40: 0 fastcc: 1
[ 2679.060579] ath: phy3: Set channel: 5180 MHz width: 2
[ 2679.060713] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2679.264948] ath: phy3: Set channel: 5680 MHz width: 0
[ 2679.265095] ath: phy3: Reset to 5680 MHz, HT40: 0 fastcc: 1
[ 2679.380727] ath: phy3: Set channel: 5180 MHz width: 2
[ 2679.380859] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2679.585137] ath: phy3: Set channel: 5700 MHz width: 0
[ 2679.585298] ath: phy3: Reset to 5700 MHz, HT40: 0 fastcc: 1
[ 2679.700876] ath: phy3: Set channel: 5180 MHz width: 2
[ 2679.701030] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2679.705506] ath: phy3: Set HW RX filter: 0x607
[ 2734.288401] ath: phy3: Set HW RX filter: 0x417
[ 2734.288425] ath: phy3: Set channel: 2412 MHz width: 0
[ 2734.288561] ath: phy3: Reset to 2412 MHz, HT40: 0 fastcc: 1
[ 2734.353097] ath: phy3: Set channel: 2417 MHz width: 0
[ 2734.353236] ath: phy3: Reset to 2417 MHz, HT40: 0 fastcc: 1
[ 2734.414124] ath: phy3: Set channel: 5180 MHz width: 2
[ 2734.414255] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2734.618326] ath: phy3: Set channel: 2422 MHz width: 0
[ 2734.618471] ath: phy3: Reset to 2422 MHz, HT40: 0 fastcc: 1
[ 2734.683249] ath: phy3: Set channel: 2427 MHz width: 0
[ 2734.683385] ath: phy3: Reset to 2427 MHz, HT40: 0 fastcc: 1
[ 2734.744243] ath: phy3: Set channel: 5180 MHz width: 2
[ 2734.744394] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2734.948420] ath: phy3: Set channel: 2432 MHz width: 0
[ 2734.948558] ath: phy3: Reset to 2432 MHz, HT40: 0 fastcc: 1
[ 2735.013399] ath: phy3: Set channel: 2437 MHz width: 0
[ 2735.013530] ath: phy3: Reset to 2437 MHz, HT40: 0 fastcc: 1
[ 2735.074419] ath: phy3: Set channel: 5180 MHz width: 2
[ 2735.074566] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2735.278621] ath: phy3: Set channel: 2442 MHz width: 0
[ 2735.278756] ath: phy3: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 2735.343550] ath: phy3: Set channel: 2447 MHz width: 0
[ 2735.343687] ath: phy3: Reset to 2447 MHz, HT40: 0 fastcc: 1
[ 2735.404585] ath: phy3: Set channel: 5180 MHz width: 2
[ 2735.404740] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2735.608771] ath: phy3: Set channel: 2452 MHz width: 0
[ 2735.608910] ath: phy3: Reset to 2452 MHz, HT40: 0 fastcc: 1
[ 2735.673652] ath: phy3: Set channel: 2457 MHz width: 0
[ 2735.673788] ath: phy3: Reset to 2457 MHz, HT40: 0 fastcc: 1
[ 2735.734717] ath: phy3: Set channel: 5180 MHz width: 2
[ 2735.734867] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2735.938870] ath: phy3: Set channel: 2462 MHz width: 0
[ 2735.939004] ath: phy3: Reset to 2462 MHz, HT40: 0 fastcc: 1
[ 2736.003850] ath: phy3: Set channel: 5180 MHz width: 2
[ 2736.003990] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2736.208020] ath: phy3: Set channel: 2467 MHz width: 0
[ 2736.208157] ath: phy3: Reset to 2467 MHz, HT40: 0 fastcc: 1
[ 2736.323980] ath: phy3: Set channel: 5180 MHz width: 2
[ 2736.324137] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2736.528189] ath: phy3: Set channel: 2472 MHz width: 0
[ 2736.528325] ath: phy3: Reset to 2472 MHz, HT40: 0 fastcc: 1
[ 2736.644151] ath: phy3: Set channel: 5180 MHz width: 2
[ 2736.644288] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2736.848290] ath: phy3: Set channel: 5180 MHz width: 2
[ 2736.848425] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2736.963250] ath: phy3: Set channel: 5180 MHz width: 2
[ 2736.963390] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2737.167487] ath: phy3: Set channel: 5200 MHz width: 0
[ 2737.167635] ath: phy3: Reset to 5200 MHz, HT40: 0 fastcc: 1
[ 2737.283427] ath: phy3: Set channel: 5180 MHz width: 2
[ 2737.283585] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2737.487649] ath: phy3: Set channel: 5220 MHz width: 0
[ 2737.487791] ath: phy3: Reset to 5220 MHz, HT40: 0 fastcc: 1
[ 2737.603588] ath: phy3: Set channel: 5180 MHz width: 2
[ 2737.603733] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2737.807788] ath: phy3: Set channel: 5240 MHz width: 0
[ 2737.807934] ath: phy3: Reset to 5240 MHz, HT40: 0 fastcc: 1
[ 2737.923744] ath: phy3: Set channel: 5180 MHz width: 2
[ 2737.923882] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2738.127940] ath: phy3: Set channel: 5260 MHz width: 0
[ 2738.128083] ath: phy3: Reset to 5260 MHz, HT40: 0 fastcc: 1
[ 2738.243895] ath: phy3: Set channel: 5180 MHz width: 2
[ 2738.244032] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2738.448073] ath: phy3: Set channel: 5280 MHz width: 0
[ 2738.448215] ath: phy3: Reset to 5280 MHz, HT40: 0 fastcc: 1
[ 2738.564039] ath: phy3: Set channel: 5180 MHz width: 2
[ 2738.564192] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2738.768235] ath: phy3: Set channel: 5300 MHz width: 0
[ 2738.768381] ath: phy3: Reset to 5300 MHz, HT40: 0 fastcc: 1
[ 2738.884190] ath: phy3: Set channel: 5180 MHz width: 2
[ 2738.884334] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2739.088369] ath: phy3: Set channel: 5320 MHz width: 0
[ 2739.088502] ath: phy3: Reset to 5320 MHz, HT40: 0 fastcc: 1
[ 2739.204336] ath: phy3: Set channel: 5180 MHz width: 2
[ 2739.204475] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2739.408541] ath: phy3: Set channel: 5500 MHz width: 0
[ 2739.408689] ath: phy3: Reset to 5500 MHz, HT40: 0 fastcc: 1
[ 2739.524485] ath: phy3: Set channel: 5180 MHz width: 2
[ 2739.524622] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2739.728683] ath: phy3: Set channel: 5520 MHz width: 0
[ 2739.728826] ath: phy3: Reset to 5520 MHz, HT40: 0 fastcc: 1
[ 2739.844632] ath: phy3: Set channel: 5180 MHz width: 2
[ 2739.844783] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2740.048782] ath: phy3: Set channel: 5540 MHz width: 0
[ 2740.048932] ath: phy3: Reset to 5540 MHz, HT40: 0 fastcc: 1
[ 2740.164778] ath: phy3: Set channel: 5180 MHz width: 2
[ 2740.164913] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2740.368979] ath: phy3: Set channel: 5560 MHz width: 0
[ 2740.369124] ath: phy3: Reset to 5560 MHz, HT40: 0 fastcc: 1
[ 2740.484923] ath: phy3: Set channel: 5180 MHz width: 2
[ 2740.485058] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2740.689118] ath: phy3: Set channel: 5580 MHz width: 0
[ 2740.689263] ath: phy3: Reset to 5580 MHz, HT40: 0 fastcc: 1
[ 2740.805074] ath: phy3: Set channel: 5180 MHz width: 2
[ 2740.805212] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2741.009247] ath: phy3: Set channel: 5600 MHz width: 0
[ 2741.009388] ath: phy3: Reset to 5600 MHz, HT40: 0 fastcc: 1
[ 2741.125223] ath: phy3: Set channel: 5180 MHz width: 2
[ 2741.125360] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2741.329420] ath: phy3: Set channel: 5620 MHz width: 0
[ 2741.329566] ath: phy3: Reset to 5620 MHz, HT40: 0 fastcc: 1
[ 2741.445331] ath: phy3: Set channel: 5180 MHz width: 2
[ 2741.445484] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2741.649575] ath: phy3: Set channel: 5640 MHz width: 0
[ 2741.649722] ath: phy3: Reset to 5640 MHz, HT40: 0 fastcc: 1
[ 2741.765512] ath: phy3: Set channel: 5180 MHz width: 2
[ 2741.765648] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2741.969710] ath: phy3: Set channel: 5660 MHz width: 0
[ 2741.969852] ath: phy3: Reset to 5660 MHz, HT40: 0 fastcc: 1
[ 2742.085664] ath: phy3: Set channel: 5180 MHz width: 2
[ 2742.085802] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2742.289841] ath: phy3: Set channel: 5680 MHz width: 0
[ 2742.289979] ath: phy3: Reset to 5680 MHz, HT40: 0 fastcc: 1
[ 2742.405762] ath: phy3: Set channel: 5180 MHz width: 2
[ 2742.405915] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2742.610007] ath: phy3: Set channel: 5700 MHz width: 0
[ 2742.610149] ath: phy3: Reset to 5700 MHz, HT40: 0 fastcc: 1
[ 2742.725960] ath: phy3: Set channel: 5180 MHz width: 2
[ 2742.726103] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2742.730621] ath: phy3: Set HW RX filter: 0x607
[ 2817.331534] ath: phy3: Set HW RX filter: 0x417
[ 2817.331615] ath: phy3: Set channel: 2412 MHz width: 0
[ 2817.331754] ath: phy3: Reset to 2412 MHz, HT40: 0 fastcc: 1
[ 2817.396422] ath: phy3: Set channel: 5180 MHz width: 2
[ 2817.396559] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2817.600614] ath: phy3: Set channel: 2417 MHz width: 0
[ 2817.600751] ath: phy3: Reset to 2417 MHz, HT40: 0 fastcc: 1
[ 2817.665549] ath: phy3: Set channel: 2422 MHz width: 0
[ 2817.665683] ath: phy3: Reset to 2422 MHz, HT40: 0 fastcc: 1
[ 2817.726579] ath: phy3: Set channel: 5180 MHz width: 2
[ 2817.726719] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2817.930765] ath: phy3: Set channel: 2427 MHz width: 0
[ 2817.930894] ath: phy3: Reset to 2427 MHz, HT40: 0 fastcc: 1
[ 2817.995679] ath: phy3: Set channel: 2432 MHz width: 0
[ 2817.995820] ath: phy3: Reset to 2432 MHz, HT40: 0 fastcc: 1
[ 2818.056709] ath: phy3: Set channel: 5180 MHz width: 2
[ 2818.056851] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2818.260924] ath: phy3: Set channel: 2437 MHz width: 0
[ 2818.261063] ath: phy3: Reset to 2437 MHz, HT40: 0 fastcc: 1
[ 2818.325801] ath: phy3: Set channel: 5180 MHz width: 2
[ 2818.325939] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2818.529991] ath: phy3: Set channel: 2442 MHz width: 0
[ 2818.530133] ath: phy3: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 2818.594974] ath: phy3: Set channel: 2447 MHz width: 0
[ 2818.595109] ath: phy3: Reset to 2447 MHz, HT40: 0 fastcc: 1
[ 2818.656002] ath: phy3: Set channel: 5180 MHz width: 2
[ 2818.656133] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2818.860197] ath: phy3: Set channel: 2452 MHz width: 0
[ 2818.860343] ath: phy3: Reset to 2452 MHz, HT40: 0 fastcc: 1
[ 2818.925128] ath: phy3: Set channel: 2457 MHz width: 0
[ 2818.925260] ath: phy3: Reset to 2457 MHz, HT40: 0 fastcc: 1
[ 2818.986139] ath: phy3: Set channel: 5180 MHz width: 2
[ 2818.986304] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2819.190354] ath: phy3: Set channel: 2462 MHz width: 0
[ 2819.190497] ath: phy3: Reset to 2462 MHz, HT40: 0 fastcc: 1
[ 2819.255263] ath: phy3: Set channel: 5180 MHz width: 2
[ 2819.255417] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2819.459469] ath: phy3: Set channel: 2467 MHz width: 0
[ 2819.459614] ath: phy3: Reset to 2467 MHz, HT40: 0 fastcc: 1
[ 2819.575429] ath: phy3: Set channel: 5180 MHz width: 2
[ 2819.575566] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2819.779621] ath: phy3: Set channel: 2472 MHz width: 0
[ 2819.779762] ath: phy3: Reset to 2472 MHz, HT40: 0 fastcc: 1
[ 2819.895569] ath: phy3: Set channel: 5180 MHz width: 2
[ 2819.895708] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2820.099774] ath: phy3: Set channel: 5180 MHz width: 2
[ 2820.099917] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2820.214711] ath: phy3: Set channel: 5180 MHz width: 2
[ 2820.214882] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2820.418928] ath: phy3: Set channel: 5200 MHz width: 0
[ 2820.419071] ath: phy3: Reset to 5200 MHz, HT40: 0 fastcc: 1
[ 2820.534868] ath: phy3: Set channel: 5180 MHz width: 2
[ 2820.535004] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2820.739058] ath: phy3: Set channel: 5220 MHz width: 0
[ 2820.739199] ath: phy3: Reset to 5220 MHz, HT40: 0 fastcc: 1
[ 2820.855021] ath: phy3: Set channel: 5180 MHz width: 2
[ 2820.855160] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2821.059200] ath: phy3: Set channel: 5240 MHz width: 0
[ 2821.059334] ath: phy3: Reset to 5240 MHz, HT40: 0 fastcc: 1
[ 2821.175155] ath: phy3: Set channel: 5180 MHz width: 2
[ 2821.175292] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2821.379361] ath: phy3: Set channel: 5260 MHz width: 0
[ 2821.379505] ath: phy3: Reset to 5260 MHz, HT40: 0 fastcc: 1
[ 2821.495315] ath: phy3: Set channel: 5180 MHz width: 2
[ 2821.495451] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2821.699517] ath: phy3: Set channel: 5280 MHz width: 0
[ 2821.699664] ath: phy3: Reset to 5280 MHz, HT40: 0 fastcc: 1
[ 2821.815462] ath: phy3: Set channel: 5180 MHz width: 2
[ 2821.815600] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2822.019658] ath: phy3: Set channel: 5300 MHz width: 0
[ 2822.019801] ath: phy3: Reset to 5300 MHz, HT40: 0 fastcc: 1
[ 2822.135608] ath: phy3: Set channel: 5180 MHz width: 2
[ 2822.135745] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2822.339799] ath: phy3: Set channel: 5320 MHz width: 0
[ 2822.339942] ath: phy3: Reset to 5320 MHz, HT40: 0 fastcc: 1
[ 2822.455746] ath: phy3: Set channel: 5180 MHz width: 2
[ 2822.455905] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2822.659935] ath: phy3: Set channel: 5500 MHz width: 0
[ 2822.660072] ath: phy3: Reset to 5500 MHz, HT40: 0 fastcc: 1
[ 2822.775857] ath: phy3: Set channel: 5180 MHz width: 2
[ 2822.776001] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2822.980110] ath: phy3: Set channel: 5520 MHz width: 0
[ 2822.980252] ath: phy3: Reset to 5520 MHz, HT40: 0 fastcc: 1
[ 2823.096068] ath: phy3: Set channel: 5180 MHz width: 2
[ 2823.096216] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2823.300251] ath: phy3: Set channel: 5540 MHz width: 0
[ 2823.300393] ath: phy3: Reset to 5540 MHz, HT40: 0 fastcc: 1
[ 2823.416187] ath: phy3: Set channel: 5180 MHz width: 2
[ 2823.416350] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2823.620397] ath: phy3: Set channel: 5560 MHz width: 0
[ 2823.620541] ath: phy3: Reset to 5560 MHz, HT40: 0 fastcc: 1
[ 2823.736319] ath: phy3: Set channel: 5180 MHz width: 2
[ 2823.736459] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2823.940502] ath: phy3: Set channel: 5580 MHz width: 0
[ 2823.940650] ath: phy3: Reset to 5580 MHz, HT40: 0 fastcc: 1
[ 2824.056505] ath: phy3: Set channel: 5180 MHz width: 2
[ 2824.056655] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2824.260683] ath: phy3: Set channel: 5600 MHz width: 0
[ 2824.260824] ath: phy3: Reset to 5600 MHz, HT40: 0 fastcc: 1
[ 2824.376642] ath: phy3: Set channel: 5180 MHz width: 2
[ 2824.376778] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2824.580796] ath: phy3: Set channel: 5620 MHz width: 0
[ 2824.580941] ath: phy3: Reset to 5620 MHz, HT40: 0 fastcc: 1
[ 2824.696792] ath: phy3: Set channel: 5180 MHz width: 2
[ 2824.696928] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2824.900962] ath: phy3: Set channel: 5640 MHz width: 0
[ 2824.901099] ath: phy3: Reset to 5640 MHz, HT40: 0 fastcc: 1
[ 2825.016931] ath: phy3: Set channel: 5180 MHz width: 2
[ 2825.017069] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2825.221128] ath: phy3: Set channel: 5660 MHz width: 0
[ 2825.221270] ath: phy3: Reset to 5660 MHz, HT40: 0 fastcc: 1
[ 2825.337085] ath: phy3: Set channel: 5180 MHz width: 2
[ 2825.337222] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2825.541275] ath: phy3: Set channel: 5680 MHz width: 0
[ 2825.541420] ath: phy3: Reset to 5680 MHz, HT40: 0 fastcc: 1
[ 2825.657233] ath: phy3: Set channel: 5180 MHz width: 2
[ 2825.657369] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2825.861381] ath: phy3: Set channel: 5700 MHz width: 0
[ 2825.861525] ath: phy3: Reset to 5700 MHz, HT40: 0 fastcc: 1
[ 2825.977336] ath: phy3: Set channel: 5180 MHz width: 2
[ 2825.977482] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2825.982152] ath: phy3: Set HW RX filter: 0x607
[ 2867.044129] ath: phy3: Set HW Key
[ 2920.374005] ath: phy3: Set HW RX filter: 0x417
[ 2920.374029] ath: phy3: Set channel: 2412 MHz width: 0
[ 2920.374151] ath: phy3: Reset to 2412 MHz, HT40: 0 fastcc: 1
[ 2920.438956] ath: phy3: Set channel: 5180 MHz width: 2
[ 2920.439111] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2920.643345] ath: phy3: Set channel: 2417 MHz width: 0
[ 2920.643485] ath: phy3: Reset to 2417 MHz, HT40: 0 fastcc: 1
[ 2920.708099] ath: phy3: Set channel: 2422 MHz width: 0
[ 2920.708231] ath: phy3: Reset to 2422 MHz, HT40: 0 fastcc: 1
[ 2920.769130] ath: phy3: Set channel: 5180 MHz width: 2
[ 2920.769262] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2920.973464] ath: phy3: Set channel: 2427 MHz width: 0
[ 2920.973595] ath: phy3: Reset to 2427 MHz, HT40: 0 fastcc: 1
[ 2921.038243] ath: phy3: Set channel: 2432 MHz width: 0
[ 2921.038390] ath: phy3: Reset to 2432 MHz, HT40: 0 fastcc: 1
[ 2921.099265] ath: phy3: Set channel: 5180 MHz width: 2
[ 2921.099413] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2921.303631] ath: phy3: Set channel: 2437 MHz width: 0
[ 2921.303783] ath: phy3: Reset to 2437 MHz, HT40: 0 fastcc: 1
[ 2921.368410] ath: phy3: Set channel: 2442 MHz width: 0
[ 2921.368557] ath: phy3: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 2921.429419] ath: phy3: Set channel: 5180 MHz width: 2
[ 2921.429580] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2921.633794] ath: phy3: Set channel: 2447 MHz width: 0
[ 2921.633947] ath: phy3: Reset to 2447 MHz, HT40: 0 fastcc: 1
[ 2921.698536] ath: phy3: Set channel: 2452 MHz width: 0
[ 2921.698679] ath: phy3: Reset to 2452 MHz, HT40: 0 fastcc: 1
[ 2921.759573] ath: phy3: Set channel: 5180 MHz width: 2
[ 2921.759722] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2921.963929] ath: phy3: Set channel: 2457 MHz width: 0
[ 2921.964070] ath: phy3: Reset to 2457 MHz, HT40: 0 fastcc: 1
[ 2922.028708] ath: phy3: Set channel: 2462 MHz width: 0
[ 2922.028845] ath: phy3: Reset to 2462 MHz, HT40: 0 fastcc: 1
[ 2922.089737] ath: phy3: Set channel: 5180 MHz width: 2
[ 2922.089870] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2922.294073] ath: phy3: Set channel: 2467 MHz width: 0
[ 2922.294216] ath: phy3: Reset to 2467 MHz, HT40: 0 fastcc: 1
[ 2922.409884] ath: phy3: Set channel: 5180 MHz width: 2
[ 2922.410020] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2922.614144] ath: phy3: Set channel: 2472 MHz width: 0
[ 2922.614284] ath: phy3: Reset to 2472 MHz, HT40: 0 fastcc: 1
[ 2922.730036] ath: phy3: Set channel: 5180 MHz width: 2
[ 2922.730173] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2922.934385] ath: phy3: Set channel: 5180 MHz width: 2
[ 2922.934530] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2923.049186] ath: phy3: Set channel: 5180 MHz width: 2
[ 2923.049329] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2923.253536] ath: phy3: Set channel: 5200 MHz width: 0
[ 2923.253682] ath: phy3: Reset to 5200 MHz, HT40: 0 fastcc: 1
[ 2923.369280] ath: phy3: Set channel: 5180 MHz width: 2
[ 2923.369457] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2923.573666] ath: phy3: Set channel: 5220 MHz width: 0
[ 2923.573796] ath: phy3: Reset to 5220 MHz, HT40: 0 fastcc: 1
[ 2923.689474] ath: phy3: Set channel: 5180 MHz width: 2
[ 2923.689623] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2923.893870] ath: phy3: Set channel: 5240 MHz width: 0
[ 2923.894011] ath: phy3: Reset to 5240 MHz, HT40: 0 fastcc: 1
[ 2924.009613] ath: phy3: Set channel: 5180 MHz width: 2
[ 2924.009768] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2924.213848] ath: phy3: Set channel: 5260 MHz width: 0
[ 2924.213989] ath: phy3: Reset to 5260 MHz, HT40: 0 fastcc: 1
[ 2924.329771] ath: phy3: Set channel: 5180 MHz width: 2
[ 2924.329929] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2924.534092] ath: phy3: Set channel: 5280 MHz width: 0
[ 2924.534235] ath: phy3: Reset to 5280 MHz, HT40: 0 fastcc: 1
[ 2924.649916] ath: phy3: Set channel: 5180 MHz width: 2
[ 2924.650065] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2924.854255] ath: phy3: Set channel: 5300 MHz width: 0
[ 2924.854401] ath: phy3: Reset to 5300 MHz, HT40: 0 fastcc: 1
[ 2924.970064] ath: phy3: Set channel: 5180 MHz width: 2
[ 2924.970218] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2925.174412] ath: phy3: Set channel: 5320 MHz width: 0
[ 2925.174557] ath: phy3: Reset to 5320 MHz, HT40: 0 fastcc: 1
[ 2925.290208] ath: phy3: Set channel: 5180 MHz width: 2
[ 2925.290383] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2925.494554] ath: phy3: Set channel: 5500 MHz width: 0
[ 2925.494704] ath: phy3: Reset to 5500 MHz, HT40: 0 fastcc: 1
[ 2925.610370] ath: phy3: Set channel: 5180 MHz width: 2
[ 2925.610517] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2925.814711] ath: phy3: Set channel: 5520 MHz width: 0
[ 2925.814852] ath: phy3: Reset to 5520 MHz, HT40: 0 fastcc: 1
[ 2925.930523] ath: phy3: Set channel: 5180 MHz width: 2
[ 2925.930686] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2926.134879] ath: phy3: Set channel: 5540 MHz width: 0
[ 2926.135031] ath: phy3: Reset to 5540 MHz, HT40: 0 fastcc: 1
[ 2926.250648] ath: phy3: Set channel: 5180 MHz width: 2
[ 2926.250821] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2926.454981] ath: phy3: Set channel: 5560 MHz width: 0
[ 2926.455122] ath: phy3: Reset to 5560 MHz, HT40: 0 fastcc: 1
[ 2926.570803] ath: phy3: Set channel: 5180 MHz width: 2
[ 2926.570953] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2926.775177] ath: phy3: Set channel: 5580 MHz width: 0
[ 2926.775324] ath: phy3: Reset to 5580 MHz, HT40: 0 fastcc: 1
[ 2926.890960] ath: phy3: Set channel: 5180 MHz width: 2
[ 2926.891111] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2927.095274] ath: phy3: Set channel: 5600 MHz width: 0
[ 2927.095410] ath: phy3: Reset to 5600 MHz, HT40: 0 fastcc: 1
[ 2927.211103] ath: phy3: Set channel: 5180 MHz width: 2
[ 2927.211251] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2927.415450] ath: phy3: Set channel: 5620 MHz width: 0
[ 2927.415593] ath: phy3: Reset to 5620 MHz, HT40: 0 fastcc: 1
[ 2927.531250] ath: phy3: Set channel: 5180 MHz width: 2
[ 2927.531385] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2927.735600] ath: phy3: Set channel: 5640 MHz width: 0
[ 2927.735746] ath: phy3: Reset to 5640 MHz, HT40: 0 fastcc: 1
[ 2927.851403] ath: phy3: Set channel: 5180 MHz width: 2
[ 2927.851555] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2928.055752] ath: phy3: Set channel: 5660 MHz width: 0
[ 2928.055894] ath: phy3: Reset to 5660 MHz, HT40: 0 fastcc: 1
[ 2928.171542] ath: phy3: Set channel: 5180 MHz width: 2
[ 2928.171692] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2928.375869] ath: phy3: Set channel: 5680 MHz width: 0
[ 2928.376032] ath: phy3: Reset to 5680 MHz, HT40: 0 fastcc: 1
[ 2928.491690] ath: phy3: Set channel: 5180 MHz width: 2
[ 2928.491839] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2928.696048] ath: phy3: Set channel: 5700 MHz width: 0
[ 2928.696192] ath: phy3: Reset to 5700 MHz, HT40: 0 fastcc: 1
[ 2928.811847] ath: phy3: Set channel: 5180 MHz width: 2
[ 2928.811989] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 2928.816485] ath: phy3: Set HW RX filter: 0x607
[ 3040.429312] ath: phy3: Set HW RX filter: 0x417
[ 3040.429322] ath: phy3: Set channel: 2412 MHz width: 0
[ 3040.429458] ath: phy3: Reset to 2412 MHz, HT40: 0 fastcc: 1
[ 3040.494385] ath: phy3: Set channel: 5180 MHz width: 2
[ 3040.494526] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3040.698569] ath: phy3: Set channel: 2417 MHz width: 0
[ 3040.698706] ath: phy3: Reset to 2417 MHz, HT40: 0 fastcc: 1
[ 3040.763514] ath: phy3: Set channel: 2422 MHz width: 0
[ 3040.763674] ath: phy3: Reset to 2422 MHz, HT40: 0 fastcc: 1
[ 3040.824513] ath: phy3: Set channel: 5180 MHz width: 2
[ 3040.824655] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3041.028708] ath: phy3: Set channel: 2427 MHz width: 0
[ 3041.028848] ath: phy3: Reset to 2427 MHz, HT40: 0 fastcc: 1
[ 3041.093659] ath: phy3: Set channel: 2432 MHz width: 0
[ 3041.093797] ath: phy3: Reset to 2432 MHz, HT40: 0 fastcc: 1
[ 3041.154667] ath: phy3: Set channel: 5180 MHz width: 2
[ 3041.154814] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3041.358820] ath: phy3: Set channel: 2437 MHz width: 0
[ 3041.358956] ath: phy3: Reset to 2437 MHz, HT40: 0 fastcc: 1
[ 3041.423758] ath: phy3: Set channel: 2442 MHz width: 0
[ 3041.423902] ath: phy3: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 3041.484830] ath: phy3: Set channel: 5180 MHz width: 2
[ 3041.484972] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3041.689036] ath: phy3: Set channel: 2447 MHz width: 0
[ 3041.689170] ath: phy3: Reset to 2447 MHz, HT40: 0 fastcc: 1
[ 3041.753909] ath: phy3: Set channel: 2452 MHz width: 0
[ 3041.754060] ath: phy3: Reset to 2452 MHz, HT40: 0 fastcc: 1
[ 3041.814940] ath: phy3: Set channel: 5180 MHz width: 2
[ 3041.815077] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3042.019133] ath: phy3: Set channel: 2457 MHz width: 0
[ 3042.019278] ath: phy3: Reset to 2457 MHz, HT40: 0 fastcc: 1
[ 3042.084062] ath: phy3: Set channel: 2462 MHz width: 0
[ 3042.084209] ath: phy3: Reset to 2462 MHz, HT40: 0 fastcc: 1
[ 3042.145120] ath: phy3: Set channel: 5180 MHz width: 2
[ 3042.145267] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3042.349335] ath: phy3: Set channel: 2467 MHz width: 0
[ 3042.349488] ath: phy3: Reset to 2467 MHz, HT40: 0 fastcc: 1
[ 3042.404150] ath: phy3: BB_WATCHDOG: Skipping interrupts
[ 3042.404290] ath: phy3: Reset to 2467 MHz, HT40: 0 fastcc: 0
[ 3042.465291] ath: phy3: Set channel: 5180 MHz width: 2
[ 3042.465429] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3042.669425] ath: phy3: Set channel: 2472 MHz width: 0
[ 3042.669556] ath: phy3: Reset to 2472 MHz, HT40: 0 fastcc: 1
[ 3042.785385] ath: phy3: Set channel: 5180 MHz width: 2
[ 3042.785534] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3042.989619] ath: phy3: Set channel: 5180 MHz width: 2
[ 3042.989758] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3043.104587] ath: phy3: Set channel: 5180 MHz width: 2
[ 3043.104735] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3043.308771] ath: phy3: Set channel: 5200 MHz width: 0
[ 3043.308910] ath: phy3: Reset to 5200 MHz, HT40: 0 fastcc: 1
[ 3043.424682] ath: phy3: Set channel: 5180 MHz width: 2
[ 3043.424830] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3043.628919] ath: phy3: Set channel: 5220 MHz width: 0
[ 3043.629052] ath: phy3: Reset to 5220 MHz, HT40: 0 fastcc: 1
[ 3043.744829] ath: phy3: Set channel: 5180 MHz width: 2
[ 3043.744978] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3043.949024] ath: phy3: Set channel: 5240 MHz width: 0
[ 3043.949155] ath: phy3: Reset to 5240 MHz, HT40: 0 fastcc: 1
[ 3044.065003] ath: phy3: Set channel: 5180 MHz width: 2
[ 3044.065177] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3044.269213] ath: phy3: Set channel: 5260 MHz width: 0
[ 3044.269355] ath: phy3: Reset to 5260 MHz, HT40: 0 fastcc: 1
[ 3044.385181] ath: phy3: Set channel: 5180 MHz width: 2
[ 3044.385317] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3044.589356] ath: phy3: Set channel: 5280 MHz width: 0
[ 3044.589492] ath: phy3: Reset to 5280 MHz, HT40: 0 fastcc: 1
[ 3044.705324] ath: phy3: Set channel: 5180 MHz width: 2
[ 3044.705461] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3044.909507] ath: phy3: Set channel: 5300 MHz width: 0
[ 3044.909643] ath: phy3: Reset to 5300 MHz, HT40: 0 fastcc: 1
[ 3045.025445] ath: phy3: Set channel: 5180 MHz width: 2
[ 3045.025582] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3045.229600] ath: phy3: Set channel: 5320 MHz width: 0
[ 3045.229736] ath: phy3: Reset to 5320 MHz, HT40: 0 fastcc: 1
[ 3045.345591] ath: phy3: Set channel: 5180 MHz width: 2
[ 3045.345733] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3045.549766] ath: phy3: Set channel: 5500 MHz width: 0
[ 3045.549915] ath: phy3: Reset to 5500 MHz, HT40: 0 fastcc: 1
[ 3045.665769] ath: phy3: Set channel: 5180 MHz width: 2
[ 3045.665907] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3045.869940] ath: phy3: Set channel: 5520 MHz width: 0
[ 3045.870097] ath: phy3: Reset to 5520 MHz, HT40: 0 fastcc: 1
[ 3045.985915] ath: phy3: Set channel: 5180 MHz width: 2
[ 3045.986053] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3046.190117] ath: phy3: Set channel: 5540 MHz width: 0
[ 3046.190262] ath: phy3: Reset to 5540 MHz, HT40: 0 fastcc: 1
[ 3046.306064] ath: phy3: Set channel: 5180 MHz width: 2
[ 3046.306202] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3046.510186] ath: phy3: Set channel: 5560 MHz width: 0
[ 3046.510319] ath: phy3: Reset to 5560 MHz, HT40: 0 fastcc: 1
[ 3046.626207] ath: phy3: Set channel: 5180 MHz width: 2
[ 3046.626343] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3046.830413] ath: phy3: Set channel: 5580 MHz width: 0
[ 3046.830557] ath: phy3: Reset to 5580 MHz, HT40: 0 fastcc: 1
[ 3046.946359] ath: phy3: Set channel: 5180 MHz width: 2
[ 3046.946496] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3047.150568] ath: phy3: Set channel: 5600 MHz width: 0
[ 3047.150724] ath: phy3: Reset to 5600 MHz, HT40: 0 fastcc: 1
[ 3047.266473] ath: phy3: Set channel: 5180 MHz width: 2
[ 3047.266627] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3047.470705] ath: phy3: Set channel: 5620 MHz width: 0
[ 3047.470856] ath: phy3: Reset to 5620 MHz, HT40: 0 fastcc: 1
[ 3047.586687] ath: phy3: Set channel: 5180 MHz width: 2
[ 3047.586823] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3047.790843] ath: phy3: Set channel: 5640 MHz width: 0
[ 3047.790988] ath: phy3: Reset to 5640 MHz, HT40: 0 fastcc: 1
[ 3047.906810] ath: phy3: Set channel: 5180 MHz width: 2
[ 3047.906967] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3048.110982] ath: phy3: Set channel: 5660 MHz width: 0
[ 3048.111128] ath: phy3: Reset to 5660 MHz, HT40: 0 fastcc: 1
[ 3048.226952] ath: phy3: Set channel: 5180 MHz width: 2
[ 3048.227102] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3048.431150] ath: phy3: Set channel: 5680 MHz width: 0
[ 3048.431285] ath: phy3: Reset to 5680 MHz, HT40: 0 fastcc: 1
[ 3048.547102] ath: phy3: Set channel: 5180 MHz width: 2
[ 3048.547241] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3048.751263] ath: phy3: Set channel: 5700 MHz width: 0
[ 3048.751402] ath: phy3: Reset to 5700 MHz, HT40: 0 fastcc: 1
[ 3048.867282] ath: phy3: Set channel: 5180 MHz width: 2
[ 3048.867454] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3048.872053] ath: phy3: Set HW RX filter: 0x607
[ 3160.485230] ath: phy3: Set HW RX filter: 0x417
[ 3160.485255] ath: phy3: Set channel: 2412 MHz width: 0
[ 3160.485380] ath: phy3: Reset to 2412 MHz, HT40: 0 fastcc: 1
[ 3160.549783] ath: phy3: Set channel: 2417 MHz width: 0
[ 3160.549911] ath: phy3: Reset to 2417 MHz, HT40: 0 fastcc: 1
[ 3160.610817] ath: phy3: Set channel: 5180 MHz width: 2
[ 3160.610952] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3160.815181] ath: phy3: Set channel: 2422 MHz width: 0
[ 3160.815307] ath: phy3: Reset to 2422 MHz, HT40: 0 fastcc: 1
[ 3160.879920] ath: phy3: Set channel: 2427 MHz width: 0
[ 3160.880065] ath: phy3: Reset to 2427 MHz, HT40: 0 fastcc: 1
[ 3160.940948] ath: phy3: Set channel: 5180 MHz width: 2
[ 3160.941097] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3161.145291] ath: phy3: Set channel: 2432 MHz width: 0
[ 3161.145425] ath: phy3: Reset to 2432 MHz, HT40: 0 fastcc: 1
[ 3161.210116] ath: phy3: Set channel: 2437 MHz width: 0
[ 3161.210253] ath: phy3: Reset to 2437 MHz, HT40: 0 fastcc: 1
[ 3161.271121] ath: phy3: Set channel: 5180 MHz width: 2
[ 3161.271256] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3161.475437] ath: phy3: Set channel: 2442 MHz width: 0
[ 3161.475583] ath: phy3: Reset to 2442 MHz, HT40: 0 fastcc: 1
[ 3161.540259] ath: phy3: Set channel: 5180 MHz width: 2
[ 3161.540394] ath: phy3: unsupported hw bitrate detected 0x1b using 1 Mbit
[ 3161.540414] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3161.744603] ath: phy3: Set channel: 2447 MHz width: 0
[ 3161.744748] ath: phy3: Reset to 2447 MHz, HT40: 0 fastcc: 1
[ 3161.809370] ath: phy3: Set channel: 2452 MHz width: 0
[ 3161.809506] ath: phy3: Reset to 2452 MHz, HT40: 0 fastcc: 1
[ 3161.870398] ath: phy3: Set channel: 5180 MHz width: 2
[ 3161.870538] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3162.074741] ath: phy3: Set channel: 2457 MHz width: 0
[ 3162.074896] ath: phy3: Reset to 2457 MHz, HT40: 0 fastcc: 1
[ 3162.139510] ath: phy3: Set channel: 2462 MHz width: 0
[ 3162.139686] ath: phy3: Reset to 2462 MHz, HT40: 0 fastcc: 1
[ 3162.200538] ath: phy3: Set channel: 5180 MHz width: 2
[ 3162.200695] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3162.404852] ath: phy3: Set channel: 2467 MHz width: 0
[ 3162.404977] ath: phy3: Reset to 2467 MHz, HT40: 0 fastcc: 1
[ 3162.520680] ath: phy3: Set channel: 5180 MHz width: 2
[ 3162.520834] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3162.725011] ath: phy3: Set channel: 2472 MHz width: 0
[ 3162.725141] ath: phy3: Reset to 2472 MHz, HT40: 0 fastcc: 1
[ 3162.840826] ath: phy3: Set channel: 5180 MHz width: 2
[ 3162.840983] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3163.045128] ath: phy3: Set channel: 5180 MHz width: 2
[ 3163.045249] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3163.159993] ath: phy3: Set channel: 5180 MHz width: 2
[ 3163.160126] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3163.364337] ath: phy3: Set channel: 5200 MHz width: 0
[ 3163.364480] ath: phy3: Reset to 5200 MHz, HT40: 0 fastcc: 1
[ 3163.480140] ath: phy3: Set channel: 5180 MHz width: 2
[ 3163.480277] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3163.684561] ath: phy3: Set channel: 5220 MHz width: 0
[ 3163.684726] ath: phy3: Reset to 5220 MHz, HT40: 0 fastcc: 1
[ 3163.800272] ath: phy3: Set channel: 5180 MHz width: 2
[ 3163.800425] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3164.004530] ath: phy3: Set channel: 5240 MHz width: 0
[ 3164.004666] ath: phy3: Reset to 5240 MHz, HT40: 0 fastcc: 1
[ 3164.120436] ath: phy3: Set channel: 5180 MHz width: 2
[ 3164.120573] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3164.324694] ath: phy3: Set channel: 5260 MHz width: 0
[ 3164.324836] ath: phy3: Reset to 5260 MHz, HT40: 0 fastcc: 1
[ 3164.440581] ath: phy3: Set channel: 5180 MHz width: 2
[ 3164.440731] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3164.644945] ath: phy3: Set channel: 5280 MHz width: 0
[ 3164.645087] ath: phy3: Reset to 5280 MHz, HT40: 0 fastcc: 1
[ 3164.760734] ath: phy3: Set channel: 5180 MHz width: 2
[ 3164.760872] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3164.965045] ath: phy3: Set channel: 5300 MHz width: 0
[ 3164.965194] ath: phy3: Reset to 5300 MHz, HT40: 0 fastcc: 1
[ 3165.080865] ath: phy3: Set channel: 5180 MHz width: 2
[ 3165.081017] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3165.285222] ath: phy3: Set channel: 5320 MHz width: 0
[ 3165.285365] ath: phy3: Reset to 5320 MHz, HT40: 0 fastcc: 1
[ 3165.400973] ath: phy3: Set channel: 5180 MHz width: 2
[ 3165.401112] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3165.605349] ath: phy3: Set channel: 5500 MHz width: 0
[ 3165.605490] ath: phy3: Reset to 5500 MHz, HT40: 0 fastcc: 1
[ 3165.721178] ath: phy3: Set channel: 5180 MHz width: 2
[ 3165.721316] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3165.925522] ath: phy3: Set channel: 5520 MHz width: 0
[ 3165.925666] ath: phy3: Reset to 5520 MHz, HT40: 0 fastcc: 1
[ 3166.041264] ath: phy3: Set channel: 5180 MHz width: 2
[ 3166.041405] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3166.245569] ath: phy3: Set channel: 5540 MHz width: 0
[ 3166.245705] ath: phy3: Reset to 5540 MHz, HT40: 0 fastcc: 1
[ 3166.361456] ath: phy3: Set channel: 5180 MHz width: 2
[ 3166.361610] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3166.565817] ath: phy3: Set channel: 5560 MHz width: 0
[ 3166.565960] ath: phy3: Reset to 5560 MHz, HT40: 0 fastcc: 1
[ 3166.681603] ath: phy3: Set channel: 5180 MHz width: 2
[ 3166.681756] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3166.886022] ath: phy3: Set channel: 5580 MHz width: 0
[ 3166.886197] ath: phy3: Reset to 5580 MHz, HT40: 0 fastcc: 1
[ 3167.001766] ath: phy3: Set channel: 5180 MHz width: 2
[ 3167.001902] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3167.206119] ath: phy3: Set channel: 5600 MHz width: 0
[ 3167.206284] ath: phy3: Reset to 5600 MHz, HT40: 0 fastcc: 1
[ 3167.321911] ath: phy3: Set channel: 5180 MHz width: 2
[ 3167.322048] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3167.526345] ath: phy3: Set channel: 5620 MHz width: 0
[ 3167.526538] ath: phy3: Reset to 5620 MHz, HT40: 0 fastcc: 1
[ 3167.642046] ath: phy3: Set channel: 5180 MHz width: 2
[ 3167.642227] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3167.846386] ath: phy3: Set channel: 5640 MHz width: 0
[ 3167.846538] ath: phy3: Reset to 5640 MHz, HT40: 0 fastcc: 1
[ 3167.962200] ath: phy3: Set channel: 5180 MHz width: 2
[ 3167.962357] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3168.166549] ath: phy3: Set channel: 5660 MHz width: 0
[ 3168.166711] ath: phy3: Reset to 5660 MHz, HT40: 0 fastcc: 1
[ 3168.282357] ath: phy3: Set channel: 5180 MHz width: 2
[ 3168.282505] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3168.486704] ath: phy3: Set channel: 5680 MHz width: 0
[ 3168.486830] ath: phy3: Reset to 5680 MHz, HT40: 0 fastcc: 1
[ 3168.602488] ath: phy3: Set channel: 5180 MHz width: 2
[ 3168.602641] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3168.806854] ath: phy3: Set channel: 5700 MHz width: 0
[ 3168.807019] ath: phy3: Reset to 5700 MHz, HT40: 0 fastcc: 1
[ 3168.922649] ath: phy3: Set channel: 5180 MHz width: 2
[ 3168.922790] ath: phy3: Reset to 5180 MHz, HT40: 1 fastcc: 0
[ 3168.927295] ath: phy3: Set HW RX filter: 0x607
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 295 bytes
Desc: OpenPGP digital signature
Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20140107/a7b48fcd/attachment-0001.pgp
next prev parent reply other threads:[~2014-01-07 20:50 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-17 18:26 [ath9k-devel] ath: phy0: unsupported hw bitrate detected 0x1b using 1 Mbit Oleksij Rempel
2013-12-19 3:14 ` Sujith Manoharan
2013-12-19 7:33 ` Oleksij Rempel
2014-01-07 16:26 ` Sujith Manoharan
2014-01-07 20:50 ` Oleksij Rempel [this message]
2014-01-08 2:08 ` Sujith Manoharan
2014-01-08 9:18 ` Oleksij Rempel
2014-01-08 10:58 ` Sujith Manoharan
2014-01-08 11:18 ` Sujith Manoharan
2014-01-08 18:12 ` Oleksij Rempel
2014-01-08 11:32 ` Oleksij Rempel
2014-01-08 16:19 ` Sujith Manoharan
2014-01-08 16:18 ` Sujith Manoharan
2014-01-08 2:20 ` Sujith Manoharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52CC6896.1090909@rempel-privat.de \
--to=linux@rempel-privat.de \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.