From: Hauke Mehrtens <hauke@hauke-m.de>
To: Stefan Assmann <sassmann@kpanic.de>, mcgrof@kernel.org
Cc: backports@vger.kernel.org
Subject: Re: [PATCH v3 02/11] backports: igb fixes for linux-3.9
Date: Thu, 09 Jan 2014 22:01:26 +0100 [thread overview]
Message-ID: <52CF0E26.5040900@hauke-m.de> (raw)
In-Reply-To: <1389177854-24292-3-git-send-email-sassmann@kpanic.de>
On 01/08/2014 11:44 AM, Stefan Assmann wrote:
> - add struct pci_sriov
> - add pci_vfs_assigned()
> - add PCI_SRIOV defines
> - add patches/collateral-evolutions/network/82-ethernet/0001-igb_net_device_ops.patch
>
> Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
> ---
> backport/backport-include/linux/pci.h | 33 +++++++++++++
> backport/backport-include/linux/pci_regs.h | 8 ++++
> backport/compat/backport-3.10.c | 46 ++++++++++++++++++
> .../82-ethernet/0001-igb_net_device_ops.patch | 56 ++++++++++++++++++++++
> 4 files changed, 143 insertions(+)
> create mode 100644 patches/collateral-evolutions/network/82-ethernet/0001-igb_net_device_ops.patch
>
> diff --git a/backport/backport-include/linux/pci.h b/backport/backport-include/linux/pci.h
> index 3a1815a..9083255 100644
> --- a/backport/backport-include/linux/pci.h
> +++ b/backport/backport-include/linux/pci.h
> @@ -178,4 +178,37 @@ bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
> .subvendor = (subvend), .subdevice = (subdev)
> #endif /* PCI_DEVICE_SUB */
>
> +#if LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0)
> +/* Taken from drivers/pci/pci.h */
> +struct pci_sriov {
> + int pos; /* capability position */
> + int nres; /* number of resources */
> + u32 cap; /* SR-IOV Capabilities */
> + u16 ctrl; /* SR-IOV Control */
> + u16 total_VFs; /* total VFs associated with the PF */
> + u16 initial_VFs; /* initial VFs associated with the PF */
> + u16 num_VFs; /* number of VFs available */
> + u16 offset; /* first VF Routing ID offset */
> + u16 stride; /* following VF stride */
> + u32 pgsz; /* page size for BAR alignment */
> + u8 link; /* Function Dependency Link */
> + u16 driver_max_VFs; /* max num VFs driver supports */
> + struct pci_dev *dev; /* lowest numbered PF */
> + struct pci_dev *self; /* this PF */
> + struct mutex lock; /* lock for VF bus */
> + struct work_struct mtask; /* VF Migration task */
> + u8 __iomem *mstate; /* VF Migration State Array */
> +};
> +
Please add this here:
#define pci_vfs_assigned LINUX_BACKPORT(pci_vfs_assigned)
This renames the function in backport by adding a backport_ prefix. If a
distribution backports this function compat.ko would not load without
this prefix.
> +#ifdef CONFIG_PCI_IOV
> +int pci_vfs_assigned(struct pci_dev *dev);
> +#else
> +static inline int pci_vfs_assigned(struct pci_dev *dev)
> +{
> + return 0;
> +}
> +#endif
> +
> +#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0) */
> +
> #endif /* _BACKPORT_LINUX_PCI_H */
> diff --git a/backport/backport-include/linux/pci_regs.h b/backport/backport-include/linux/pci_regs.h
> index 5cfa742..b52c4a5 100644
> --- a/backport/backport-include/linux/pci_regs.h
> +++ b/backport/backport-include/linux/pci_regs.h
> @@ -125,4 +125,12 @@
> #define PCI_PM_CAP_PME_SHIFT 11
> #endif
>
> +#ifndef PCI_SRIOV_VF_DID
> +#define PCI_SRIOV_VF_DID 0x1a /* VF Device ID */
> +#endif
> +
> +#ifndef PCI_SRIOV_CTRL_VFE
> +#define PCI_SRIOV_CTRL_VFE 0x01 /* VF Enable */
> +#endif
> +
> #endif /* __BACKPORT_UAPI_PCI_REGS_H */
> diff --git a/backport/compat/backport-3.10.c b/backport/compat/backport-3.10.c
> index 07a8dac..a9f74ed 100644
> --- a/backport/compat/backport-3.10.c
> +++ b/backport/compat/backport-3.10.c
> @@ -14,6 +14,8 @@
> #include <linux/proc_fs.h>
> #include <linux/random.h>
> #include <linux/tty.h>
> +#include <linux/pci.h>
> +#include <linux/pci_regs.h>
>
> #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0))
> #include <linux/init.h>
> @@ -128,4 +130,48 @@ void tty_port_tty_hangup(struct tty_port *port, bool check_clocal)
> }
> EXPORT_SYMBOL_GPL(tty_port_tty_hangup);
> #endif /* CONFIG_TTY */
> +
> +#ifdef CONFIG_PCI_IOV
> +/*
> + * pci_vfs_assigned - returns number of VFs are assigned to a guest
> + * @dev: the PCI device
> + *
> + * Returns number of VFs belonging to this device that are assigned to a guest.
> + * If device is not a physical function returns -ENODEV.
> + */
> +int pci_vfs_assigned(struct pci_dev *dev)
> +{
> + struct pci_dev *vfdev;
> + unsigned int vfs_assigned = 0;
> + unsigned short dev_id;
> +
> + /* only search if we are a PF */
> + if (!dev->is_physfn)
> + return 0;
> +
> + /*
> + * determine the device ID for the VFs, the vendor ID will be the
> + * same as the PF so there is no need to check for that one
> + */
> + pci_read_config_word(dev, dev->sriov->pos + PCI_SRIOV_VF_DID, &dev_id);
> +
> + /* loop through all the VFs to see if we own any that are assigned */
> + vfdev = pci_get_device(dev->vendor, dev_id, NULL);
> + while (vfdev) {
> + /*
> + * It is considered assigned if it is a virtual function with
> + * our dev as the physical function and the assigned bit is set
> + */
> + if (vfdev->is_virtfn && (vfdev->physfn == dev) &&
> + (vfdev->dev_flags & PCI_DEV_FLAGS_ASSIGNED))
> + vfs_assigned++;
> +
> + vfdev = pci_get_device(dev->vendor, dev_id, vfdev);
> + }
> +
> + return vfs_assigned;
> +}
> +EXPORT_SYMBOL_GPL(pci_vfs_assigned);
> +#endif /* CONFIG_PCI_IOV */
> +
> #endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28)) */
> diff --git a/patches/collateral-evolutions/network/82-ethernet/0001-igb_net_device_ops.patch b/patches/collateral-evolutions/network/82-ethernet/0001-igb_net_device_ops.patch
> new file mode 100644
> index 0000000..981b89e
> --- /dev/null
> +++ b/patches/collateral-evolutions/network/82-ethernet/0001-igb_net_device_ops.patch
> @@ -0,0 +1,56 @@
> +diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
> +index 14ad4c7..f2a5abf 100644
> +--- a/drivers/net/ethernet/intel/igb/igb_main.c
> ++++ b/drivers/net/ethernet/intel/igb/igb_main.c
> +@@ -161,8 +161,13 @@ static int igb_ioctl(struct net_device *, struct ifreq *, int cmd);
> + static void igb_tx_timeout(struct net_device *);
> + static void igb_reset_task(struct work_struct *);
> + static void igb_vlan_mode(struct net_device *netdev, netdev_features_t features);
> ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,0)
> + static int igb_vlan_rx_add_vid(struct net_device *, __be16, u16);
> + static int igb_vlan_rx_kill_vid(struct net_device *, __be16, u16);
> ++#else
> ++static int igb_vlan_rx_add_vid(struct net_device *, u16);
> ++static int igb_vlan_rx_kill_vid(struct net_device *, u16);
> ++#endif
> + static void igb_restore_vlan(struct igb_adapter *);
> + static void igb_rar_set_qsel(struct igb_adapter *, u8 *, u32 , u8);
> + static void igb_ping_all_vfs(struct igb_adapter *);
> +@@ -6959,8 +6964,12 @@ static void igb_vlan_mode(struct net_device *netdev, netdev_features_t features)
> + igb_rlpml_set(adapter);
> + }
> +
> ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,0)
> + static int igb_vlan_rx_add_vid(struct net_device *netdev,
> + __be16 proto, u16 vid)
> ++#else
> ++static int igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
> ++#endif
> + {
> + struct igb_adapter *adapter = netdev_priv(netdev);
> + struct e1000_hw *hw = &adapter->hw;
> +@@ -6977,8 +6986,12 @@ static int igb_vlan_rx_add_vid(struct net_device *netdev,
> + return 0;
> + }
> +
> ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,0)
> + static int igb_vlan_rx_kill_vid(struct net_device *netdev,
> + __be16 proto, u16 vid)
> ++#else
> ++static int igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
> ++#endif
> + {
> + struct igb_adapter *adapter = netdev_priv(netdev);
> + struct e1000_hw *hw = &adapter->hw;
> +@@ -7004,7 +7017,11 @@ static void igb_restore_vlan(struct igb_adapter *adapter)
> + igb_vlan_mode(adapter->netdev, adapter->netdev->features);
> +
> + for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
> ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,0)
> + igb_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid);
> ++#else
> ++ igb_vlan_rx_add_vid(adapter->netdev, vid);
> ++#endif
> + }
> +
> + int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
>
next prev parent reply other threads:[~2014-01-09 21:01 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-08 10:44 [PATCH v3 00/11] backports: add igb driver Stefan Assmann
2014-01-08 10:44 ` [PATCH v3 01/11] backports: igb fixes for linux-3.12 Stefan Assmann
2014-01-09 20:55 ` Hauke Mehrtens
2014-01-08 10:44 ` [PATCH v3 02/11] backports: igb fixes for linux-3.9 Stefan Assmann
2014-01-09 21:01 ` Hauke Mehrtens [this message]
2014-01-08 10:44 ` [PATCH v3 03/11] backports: igb fixes for linux-3.8 Stefan Assmann
2014-01-08 10:44 ` [PATCH v3 04/11] backports: igb fixes for linux-3.7 Stefan Assmann
2014-01-09 21:13 ` Hauke Mehrtens
2014-01-13 7:40 ` Stefan Assmann
2014-01-08 10:44 ` [PATCH v3 05/11] backports: igb fixes for linux-3.6 Stefan Assmann
2014-01-08 10:44 ` [PATCH v3 06/11] backports: igb fixes for linux-3.5 Stefan Assmann
2014-01-08 10:44 ` [PATCH v3 07/11] backports: igb fixes for linux-3.4 Stefan Assmann
2014-01-08 10:44 ` [PATCH v3 08/11] backports: igb fixes for linux-3.3 Stefan Assmann
2014-01-08 10:44 ` [PATCH v3 09/11] backports: igb fixes for linux-3.2 Stefan Assmann
2014-01-08 10:44 ` [PATCH v3 10/11] backports: igb fixes for linux-3.1 Stefan Assmann
2014-01-08 10:44 ` [PATCH v3 11/11] backports: enable igb and add defconfig Stefan Assmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52CF0E26.5040900@hauke-m.de \
--to=hauke@hauke-m.de \
--cc=backports@vger.kernel.org \
--cc=mcgrof@kernel.org \
--cc=sassmann@kpanic.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.