From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anthony DeRobertis Subject: Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1) Date: Thu, 16 Jan 2014 12:08:29 -0500 Message-ID: <52D8120D.7090606@metrics.net> References: <52D576E3.8050006@metrics.net> <1389844985.8705.45.camel@bling.home> <20140116121617.GA9984@hmsreliant.think-freely.org> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------080304010705010106040704" Return-path: In-Reply-To: <20140116121617.GA9984-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: iommu-bounces-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org Errors-To: iommu-bounces-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org To: Neil Horman , Alex Williamson Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org List-Id: iommu@lists.linux-foundation.org This is a multi-part message in MIME format. --------------080304010705010106040704 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit On 01/16/2014 07:16 AM, Neil Horman wrote: > Agreed, I'd like to see the full dmesg log from both a boot that has VT-D > enabled in the bios, and then again with it disabled in the bios. I would also > be interested to know if enabling VT-D in the bios, and adding nointremap to the > kernel command line reproduces the problem. What I read below indicates: Attached are the full dmesg (through boot, anyway) with it off an on in the BIOS. The "on" one is the current boot (which has my back-out patch applied, and is working fine...). I assume you want me to test VT-d on in BIOS, without my back-out patch, and with the nointremap option? If so, I'll reboot to test that. --------------080304010705010106040704 Content-Type: text/plain; charset=UTF-8; name="dmesg-vtd-off" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg-vtd-off" [ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-rc8+ (anthony@Zia) (gcc version 4.8.2 (Debian 4.8.2-12) ) #1 SMP Mon Jan 13 13:06:25 EST 2014 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro verbose transparent_hugepage=always [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e2c00-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH X58, BIOS 1402 08/09/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EBFFF write-through [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask E00000000 write-back [ 0.000000] 2 base 600000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE [ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE [ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x63fe00000-0x63fffffff] [ 0.000000] [mem 0x63fe00000-0x63fffffff] page 2M [ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x63c000000-0x63fdfffff] [ 0.000000] [mem 0x63c000000-0x63fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x600000000-0x63bffffff] [ 0.000000] [mem 0x600000000-0x63bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M [ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x5ffffffff] [ 0.000000] [mem 0x100000000-0x5ffffffff] page 2M [ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE [ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x362b2000-0x37150fff] [ 0.000000] ACPI: RSDP 00000000000fb940 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bf780100 000064 (v01 080912 XSDT1157 20120809 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v03 080912 FACP1157 20120809 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf7804b0 00C469 (v01 A1682 A1682001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf798000 000040 [ 0.000000] ACPI: APIC 00000000bf780390 0000D8 (v01 080912 APIC1157 20120809 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf780470 00003C (v01 080912 OEMMCFG 20120809 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf798040 000072 (v01 080912 OEMB1157 20120809 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bf78f4b0 000038 (v01 080912 OEMHPET 20120809 MSFT 00000097) [ 0.000000] ACPI: ASPT 00000000bf798360 000034 (v06 080912 PerfTune 20120809 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 080912 OEMOSFR 20120809 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf79a820 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000063fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x63fffffff] [ 0.000000] NODE_DATA [mem 0x63ffe6000-0x63ffeafff] [ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880627600000-ffff88063c5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x63fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xbf77ffff] [ 0.000000] node 0: [mem 0x100000000-0x63fffffff] [ 0.000000] On node 0 totalpages: 6289181 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10667 pages used for memmap [ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31 [ 0.000000] Normal zone: 75264 pages used for memmap [ 0.000000] Normal zone: 5505024 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7d9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf7da000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88063fc00000 s85824 r8192 d20672 u131072 [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6203173 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro verbose transparent_hugepage=always [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 24718516K/25156724K available (4799K kernel code, 692K rwdata, 1592K rodata, 988K init, 952K bss, 438208K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16. [ 0.000000] NR_IRQS:33024 nr_irqs:1216 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 100663296 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.008000] tsc: PIT calibration matches HPET. 1 loops [ 0.008000] tsc: Detected 2806.429 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5612.85 BogoMIPS (lpj=11225716) [ 0.000123] pid_max: default: 32768 minimum: 301 [ 0.000214] Security Framework initialized [ 0.000274] AppArmor: AppArmor disabled by boot time parameter [ 0.000334] Yama: becoming mindful. [ 0.002282] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.010408] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.013786] Mount-cache hash table entries: 256 [ 0.014019] Initializing cgroup subsys memory [ 0.014082] Initializing cgroup subsys devices [ 0.014141] Initializing cgroup subsys freezer [ 0.014200] Initializing cgroup subsys blkio [ 0.014258] Initializing cgroup subsys perf_event [ 0.014335] CPU: Physical Processor ID: 0 [ 0.014392] CPU: Processor Core ID: 0 [ 0.014453] mce: CPU supports 9 MCE banks [ 0.014521] CPU0: Thermal monitoring enabled (TM1) [ 0.014588] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.014588] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.014588] tlb_flushall_shift: 6 [ 0.014752] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000) [ 0.015838] ACPI: Core revision 20131115 [ 0.019326] ACPI: All ACPI Tables successfully acquired [ 0.063454] Switched APIC routing to physical flat. [ 0.064022] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.103779] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05) [ 0.210022] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver. [ 0.210254] perf_event_intel: CPU erratum AAJ80 worked around [ 0.210315] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.210379] ... version: 3 [ 0.210436] ... bit width: 48 [ 0.210494] ... generic registers: 4 [ 0.210551] ... value mask: 0000ffffffffffff [ 0.210611] ... max period: 000000007fffffff [ 0.210671] ... fixed-purpose events: 3 [ 0.210728] ... event mask: 000000070000000f [ 0.211132] x86: Booting SMP configuration: [ 0.221748] CPU1 microcode updated early to revision 0x19, date = 2013-06-21 [ 0.226142] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.236906] CPU2 microcode updated early to revision 0x19, date = 2013-06-21 [ 0.251246] CPU3 microcode updated early to revision 0x19, date = 2013-06-21 [ 0.211192] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.315109] x86: Booted up 1 node, 8 CPUs [ 0.315219] smpboot: Total of 8 processors activated (44902.86 BogoMIPS) [ 0.319810] devtmpfs: initialized [ 0.323612] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes) [ 0.323837] NET: Registered protocol family 16 [ 0.323967] cpuidle: using governor ladder [ 0.324025] cpuidle: using governor menu [ 0.324103] ACPI: bus type PCI registered [ 0.324161] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.324288] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.324368] PCI: not using MMCONFIG [ 0.324425] PCI: Using configuration type 1 for base access [ 0.328290] bio: create slab at 0 [ 0.328463] ACPI: Added _OSI(Module Device) [ 0.328521] ACPI: Added _OSI(Processor Device) [ 0.328580] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.328638] ACPI: Added _OSI(Processor Aggregator Device) [ 0.330317] ACPI: Executed 1 blocks of module-level executable AML code [ 0.366096] ACPI: SSDT 00000000bf7983a0 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.366550] ACPI: Dynamic OEM Table Load: [ 0.366681] ACPI: SSDT (null) 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.366912] ACPI: SSDT 00000000bf79a1c0 000659 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 0.367263] ACPI: Dynamic OEM Table Load: [ 0.367395] ACPI: SSDT (null) 000659 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 0.367719] ACPI: Interpreter enabled [ 0.367783] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.367945] ACPI: (supports S0 S1 S3 S4 S5) [ 0.368003] ACPI: Using IOAPIC for interrupt routing [ 0.368080] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.369019] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.382810] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.383002] ACPI: No dock devices found. [ 0.388966] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.389031] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.389112] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.389461] PCI host bridge to bus 0000:00 [ 0.389520] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.389580] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.389642] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.389703] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.389766] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.389828] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff] [ 0.389891] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff] [ 0.389962] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000 [ 0.390004] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.390075] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 0.390120] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.390165] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.390251] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400 [ 0.390295] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.390339] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.390424] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 0.390468] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.390512] pci 0000:00:03.0: System wakeup disabled by ACPI [ 0.390600] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 [ 0.390641] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.390685] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.390774] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 0.392709] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 0.392813] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 0.392899] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000 [ 0.392985] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 0.393022] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f] [ 0.393111] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.393198] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 0.393235] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f] [ 0.393317] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.393403] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 0.393439] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f] [ 0.393520] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.393613] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 0.393632] pci 0000:00:1a.7: reg 0x10: [mem 0xf9dff000-0xf9dff3ff] [ 0.393711] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.393758] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.393846] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 0.393859] pci 0000:00:1b.0: reg 0x10: [mem 0xf9df8000-0xf9dfbfff 64bit] [ 0.393916] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.393983] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 0.394041] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.394094] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.394182] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400 [ 0.394241] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.394288] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.394375] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 0.394411] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f] [ 0.394493] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.394579] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 0.394616] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f] [ 0.394697] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.394783] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 0.394819] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f] [ 0.394900] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.394995] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 0.395013] pci 0000:00:1d.7: reg 0x10: [mem 0xf9dfe000-0xf9dfe3ff] [ 0.395092] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.395138] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.395223] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.395302] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.395389] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 0.395458] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000] [ 0.395548] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.395612] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.395780] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601 [ 0.395796] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07] [ 0.395803] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883] [ 0.395809] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807] [ 0.395816] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483] [ 0.395822] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f] [ 0.395829] pci 0000:00:1f.2: reg 0x24: [mem 0xf9dfc000-0xf9dfc7ff] [ 0.395868] pci 0000:00:1f.2: PME# supported from D3hot [ 0.395936] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 0.395949] pci 0000:00:1f.3: reg 0x10: [mem 0xf9dfd000-0xf9dfd0ff 64bit] [ 0.395967] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f] [ 0.396077] pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601 [ 0.396087] pci 0000:01:00.0: reg 0x10: [io 0xbc00-0xbc07] [ 0.396093] pci 0000:01:00.0: reg 0x14: [io 0xb880-0xb883] [ 0.396100] pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb807] [ 0.396106] pci 0000:01:00.0: reg 0x1c: [io 0xb480-0xb483] [ 0.396112] pci 0000:01:00.0: reg 0x20: [io 0xb400-0xb40f] [ 0.396119] pci 0000:01:00.0: reg 0x24: [mem 0xf9eff000-0xf9eff7ff] [ 0.396125] pci 0000:01:00.0: reg 0x30: [mem 0xf9ee0000-0xf9eeffff pref] [ 0.396153] pci 0000:01:00.0: PME# supported from D3hot [ 0.402086] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.402150] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.402156] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.402207] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.402222] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit] [ 0.402292] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.410107] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.410177] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.410238] pci 0000:03:00.0: [10de:0de0] type 00 class 0x030000 [ 0.410248] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.410257] pci 0000:03:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.410266] pci 0000:03:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref] [ 0.410272] pci 0000:03:00.0: reg 0x24: [io 0xcc00-0xcc7f] [ 0.410278] pci 0000:03:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref] [ 0.410350] pci 0000:03:00.1: [10de:0bea] type 00 class 0x040300 [ 0.410358] pci 0000:03:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff] [ 0.418116] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.418184] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.418186] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff] [ 0.418190] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref] [ 0.418237] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.418342] pci 0000:00:1c.0: PCI bridge to [bus 06] [ 0.418407] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.418487] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185 [ 0.418515] pci 0000:05:00.0: reg 0x10: [io 0xdc00-0xdc07] [ 0.418527] pci 0000:05:00.0: reg 0x14: [io 0xd880-0xd883] [ 0.418540] pci 0000:05:00.0: reg 0x18: [io 0xd800-0xd807] [ 0.418552] pci 0000:05:00.0: reg 0x1c: [io 0xd480-0xd483] [ 0.418565] pci 0000:05:00.0: reg 0x20: [io 0xd400-0xd40f] [ 0.418577] pci 0000:05:00.0: reg 0x24: [mem 0xfbdff000-0xfbdff1ff] [ 0.418590] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.418640] pci 0000:05:00.0: PME# supported from D3hot [ 0.426129] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.426196] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.426200] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.426255] pci 0000:07:01.0: [10ec:8167] type 00 class 0x020000 [ 0.426272] pci 0000:07:01.0: reg 0x10: [io 0xe800-0xe8ff] [ 0.426281] pci 0000:07:01.0: reg 0x14: [mem 0xfbeff000-0xfbeff0ff] [ 0.426316] pci 0000:07:01.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref] [ 0.426349] pci 0000:07:01.0: supports D1 D2 [ 0.426350] pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold [ 0.426391] pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010 [ 0.426406] pci 0000:07:02.0: reg 0x10: [mem 0xfbefe000-0xfbefe7ff] [ 0.426415] pci 0000:07:02.0: reg 0x14: [io 0xec00-0xec7f] [ 0.426476] pci 0000:07:02.0: supports D2 [ 0.426477] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold [ 0.426534] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 0.426598] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.426601] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.426606] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.426608] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.426609] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.426611] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.426612] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 0.426614] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode) [ 0.427052] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.427559] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.428064] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.428569] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.429075] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.429582] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.430086] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15) [ 0.430596] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.431139] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.431277] ACPI: \_SB_.PCI0: notify handler is installed [ 0.431307] Found 1 acpi root devices [ 0.431378] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.431457] vgaarb: loaded [ 0.431511] vgaarb: bridge control possible 0000:03:00.0 [ 0.431601] PCI: Using ACPI for IRQ routing [ 0.436874] PCI: Discovered peer bus ff [ 0.436932] PCI: root bus ff: using default resources [ 0.436933] PCI: Probing PCI hardware (bus ff) [ 0.436950] PCI host bridge to bus 0000:ff [ 0.437009] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] [ 0.437070] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff] [ 0.437133] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff] [ 0.437213] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000 [ 0.437244] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000 [ 0.437274] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000 [ 0.437302] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000 [ 0.437331] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000 [ 0.437359] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000 [ 0.437388] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000 [ 0.437416] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000 [ 0.437444] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000 [ 0.437472] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000 [ 0.437501] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000 [ 0.437530] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000 [ 0.437558] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000 [ 0.437589] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000 [ 0.437618] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000 [ 0.437647] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000 [ 0.437674] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000 [ 0.437702] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000 [ 0.437730] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000 [ 0.437767] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff [ 0.437770] PCI: pci_cache_line_size set to 64 bytes [ 0.437841] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.437843] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff] [ 0.437924] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.437989] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.438235] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.440493] Switched to clocksource hpet [ 0.443664] pnp: PnP ACPI init [ 0.443730] ACPI: bus type PNP registered [ 0.443843] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved [ 0.443906] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 0.443969] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 0.444031] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved [ 0.444094] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved [ 0.444156] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved [ 0.444219] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.444256] pnp 00:01: [dma 4] [ 0.444271] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.444296] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.444313] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.444334] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.444411] system 00:05: [io 0x0290-0x029f] has been reserved [ 0.444473] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.444658] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.444721] system 00:06: [io 0x0800-0x087f] could not be reserved [ 0.444782] system 00:06: [io 0x0500-0x057f] could not be reserved [ 0.444844] system 00:06: [io 0x0600-0x0607] has been reserved [ 0.444906] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.444968] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.445030] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved [ 0.445092] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.445157] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.445204] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active) [ 0.445257] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved [ 0.445320] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.445402] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.445465] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.445528] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.445681] pnp 00:0b: [dma 0 disabled] [ 0.445728] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.445769] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.445829] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 0.445892] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.446044] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.446107] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.446170] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.446233] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.446296] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.446359] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.446457] pnp: PnP ACPI: found 15 devices [ 0.446514] ACPI: bus type PNP unregistered [ 0.452437] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 0.452439] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000 [ 0.452447] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 05] add_size 200000 [ 0.452459] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment [ 0.452527] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000 [ 0.452528] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000 [ 0.452530] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.452533] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff] [ 0.452596] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc06fffff pref] [ 0.452673] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.452735] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.452795] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.452858] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.452924] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.452985] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.453050] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.453110] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.453172] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff] [ 0.453236] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref] [ 0.453315] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.453379] pci 0000:00:1c.0: PCI bridge to [bus 06] [ 0.453439] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.453502] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff] [ 0.453566] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.453647] pci 0000:05:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref] [ 0.453723] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.453783] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.453846] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.453910] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc06fffff pref] [ 0.453990] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 0.454049] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.454113] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.454180] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.454181] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.454183] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.454184] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.454186] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff] [ 0.454187] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff] [ 0.454189] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.454190] pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff] [ 0.454192] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff] [ 0.454193] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.454195] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbcfffff] [ 0.454196] pci_bus 0000:03: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref] [ 0.454198] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.454200] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff] [ 0.454201] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.454203] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.454204] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.454206] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc06fffff pref] [ 0.454207] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.454209] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.454210] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7] [ 0.454212] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff] [ 0.454213] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff] [ 0.454215] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff] [ 0.454216] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff] [ 0.454217] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff] [ 0.454220] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff] [ 0.454222] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff] [ 0.454293] NET: Registered protocol family 2 [ 0.454610] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.455124] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.455301] TCP: Hash tables configured (established 262144 bind 65536) [ 0.455375] TCP: reno registered [ 0.455457] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.455621] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.455838] NET: Registered protocol family 1 [ 0.459310] pci 0000:03:00.0: Boot video device [ 0.459325] PCI: CLS mismatch (256 != 64), using 64 bytes [ 0.459380] Unpacking initramfs... [ 0.731380] Freeing initrd memory: 14972K (ffff8800362b2000 - ffff880037151000) [ 0.731460] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.731522] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff] [ 0.731833] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19 [ 0.731897] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19 [ 0.731962] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19 [ 0.732027] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19 [ 0.732092] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19 [ 0.732157] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19 [ 0.732220] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19 [ 0.732285] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19 [ 0.732380] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.732758] audit: initializing netlink socket (disabled) [ 0.732825] type=2000 audit(1389638541.592:1): initialized [ 0.747480] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.748301] VFS: Disk quotas dquot_6.5.2 [ 0.748386] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.748515] msgmni has been set to 32768 [ 0.749973] alg: No test for stdrng (krng) [ 0.750051] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.750162] io scheduler noop registered [ 0.750219] io scheduler deadline registered [ 0.750299] io scheduler cfq registered (default) [ 0.750527] pcieport 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.750710] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X [ 0.750851] pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X [ 0.750913] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.750983] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.751064] intel_idle: MWAIT substates: 0x1120 [ 0.751072] intel_idle: v0.4 model 0x1A [ 0.751073] intel_idle: lapic_timer_reliable_states 0x2 [ 0.751234] GHES: HEST is not enabled! [ 0.751330] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.775175] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.775570] Linux agpgart interface v0.103 [ 0.775723] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.775785] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.776346] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.776479] mousedev: PS/2 mouse device common for all mice [ 0.776569] rtc_cmos 00:02: RTC can wake from S4 [ 0.776733] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.776815] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.776899] AMD IOMMUv2 driver by Joerg Roedel [ 0.776961] AMD IOMMUv2 functionality not available on this system [ 0.777093] TCP: cubic registered [ 0.778630] NET: Registered protocol family 10 [ 0.779444] mip6: Mobile IPv6 [ 0.779501] NET: Registered protocol family 17 [ 0.779560] mpls_gso: MPLS GSO support [ 0.779955] registered taskstats version 1 [ 0.781236] rtc_cmos 00:02: setting system clock to 2014-01-13 18:42:22 UTC (1389638542) [ 0.781331] PM: Hibernation image not present or could not be loaded. [ 0.782387] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000) [ 0.782465] Write protecting the kernel read-only data: 8192k [ 0.785651] Freeing unused kernel memory: 1332K (ffff8800014b3000 - ffff880001600000) [ 0.786939] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000) [ 0.801349] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.849653] systemd-udevd[95]: starting version 204 [ 0.870471] ACPI: bus type USB registered [ 0.870549] usbcore: registered new interface driver usbfs [ 0.870614] usbcore: registered new interface driver hub [ 0.870974] SCSI subsystem initialized [ 0.873746] usbcore: registered new device driver usb [ 0.873907] libata version 3.00 loaded. [ 0.874181] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.874621] uhci_hcd: USB Universal Host Controller Interface driver [ 0.874850] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.874853] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.874859] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 0.874990] xhci_hcd 0000:02:00.0: irq 66 for MSI/MSI-X [ 0.874996] xhci_hcd 0000:02:00.0: irq 67 for MSI/MSI-X [ 0.875002] xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X [ 0.875008] xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X [ 0.875013] xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X [ 0.875018] xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X [ 0.875024] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X [ 0.875030] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X [ 0.875063] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 0.875156] ehci-pci: EHCI PCI platform driver [ 0.875163] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.875165] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.875166] usb usb1: Product: xHCI Host Controller [ 0.875167] usb usb1: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd [ 0.875168] usb usb1: SerialNumber: 0000:02:00.0 [ 0.875180] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800 [ 0.875328] hub 1-0:1.0: USB hub found [ 0.875337] hub 1-0:1.0: 2 ports detected [ 0.875430] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.875434] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 [ 0.876662] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.876727] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.876804] usb usb2: Product: UHCI Host Controller [ 0.876864] usb usb2: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd [ 0.876925] usb usb2: SerialNumber: 0000:00:1a.0 [ 0.877660] hub 2-0:1.0: USB hub found [ 0.877727] hub 2-0:1.0: 2 ports detected [ 0.878118] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.878182] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.878290] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880 [ 0.878391] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.878455] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.878538] usb usb4: Product: UHCI Host Controller [ 0.878598] usb usb4: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd [ 0.878660] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.878827] hub 4-0:1.0: USB hub found [ 0.878894] hub 4-0:1.0: 2 ports detected [ 0.879054] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.879120] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.879154] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.879258] usb usb3: Product: xHCI Host Controller [ 0.879319] usb usb3: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd [ 0.879382] usb usb3: SerialNumber: 0000:02:00.0 [ 0.879539] hub 3-0:1.0: USB hub found [ 0.879608] hub 3-0:1.0: 2 ports detected [ 0.879857] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.879968] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00 [ 0.880079] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.880144] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.880225] usb usb5: Product: UHCI Host Controller [ 0.880289] usb usb5: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd [ 0.880355] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.880880] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.881011] r8169 0000:07:01.0 (unregistered net_device): not PCI Express [ 0.881174] hub 5-0:1.0: USB hub found [ 0.881244] hub 5-0:1.0: 2 ports detected [ 0.881333] r8169 0000:07:01.0 eth0: RTL8169sc/8110sc at 0xffffc90003040000, 54:04:a6:49:30:b0, XID 18000000 IRQ 19 [ 0.881418] r8169 0000:07:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok] [ 0.881507] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.881576] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.881686] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080 [ 0.881795] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.881862] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.881942] usb usb6: Product: UHCI Host Controller [ 0.882004] usb usb6: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd [ 0.882068] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.882235] hub 6-0:1.0: USB hub found [ 0.882358] hub 6-0:1.0: 2 ports detected [ 0.882571] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.882639] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.882738] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 [ 0.882829] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.882892] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.882969] usb usb7: Product: UHCI Host Controller [ 0.883032] usb usb7: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd [ 0.883096] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.883252] hub 7-0:1.0: USB hub found [ 0.883318] hub 7-0:1.0: 2 ports detected [ 0.883807] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.883873] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 8 [ 0.883963] ehci-pci 0000:00:1a.7: debug port 1 [ 0.887915] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 0.887921] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff000 [ 0.896701] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.896789] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.896852] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.896929] usb usb8: Product: EHCI Host Controller [ 0.896989] usb usb8: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd [ 0.897050] usb usb8: SerialNumber: 0000:00:1a.7 [ 0.897203] hub 8-0:1.0: USB hub found [ 0.897265] hub 8-0:1.0: 6 ports detected [ 0.920854] hub 2-0:1.0: USB hub found [ 0.920918] hub 2-0:1.0: 2 ports detected [ 0.944839] hub 4-0:1.0: USB hub found [ 0.944909] hub 4-0:1.0: 2 ports detected [ 0.952836] firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 0.968937] hub 5-0:1.0: USB hub found [ 0.969000] hub 5-0:1.0: 2 ports detected [ 0.969339] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.969403] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9 [ 0.969488] ehci-pci 0000:00:1d.7: debug port 1 [ 0.973451] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.973459] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dfe000 [ 0.984891] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.984994] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.985063] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.985139] usb usb9: Product: EHCI Host Controller [ 0.985198] usb usb9: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd [ 0.985259] usb usb9: SerialNumber: 0000:00:1d.7 [ 0.985559] hub 9-0:1.0: USB hub found [ 0.985626] hub 9-0:1.0: 6 ports detected [ 1.008858] hub 6-0:1.0: USB hub found [ 1.008928] hub 6-0:1.0: 2 ports detected [ 1.032916] hub 7-0:1.0: USB hub found [ 1.032981] hub 7-0:1.0: 2 ports detected [ 1.034350] ahci 0000:00:1f.2: version 3.0 [ 1.034519] ahci 0000:00:1f.2: irq 74 for MSI/MSI-X [ 1.034584] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.034664] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs [ 1.073365] scsi0 : ahci [ 1.074147] scsi1 : ahci [ 1.074398] scsi2 : ahci [ 1.074658] scsi3 : ahci [ 1.074884] scsi4 : ahci [ 1.075139] scsi5 : ahci [ 1.075258] ata1: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc100 irq 74 [ 1.075339] ata2: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc180 irq 74 [ 1.075416] ata3: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc200 irq 74 [ 1.075493] ata4: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc280 irq 74 [ 1.075570] ata5: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc300 irq 74 [ 1.075647] ata6: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc380 irq 74 [ 1.075798] ahci 0000:01:00.0: irq 75 for MSI/MSI-X [ 1.075810] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS [ 1.075881] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.075947] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10 [ 1.076046] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480 [ 1.076143] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.076207] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.076284] usb usb10: Product: UHCI Host Controller [ 1.076344] usb usb10: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd [ 1.076405] usb usb10: SerialNumber: 0000:00:1d.2 [ 1.076601] hub 10-0:1.0: USB hub found [ 1.076665] hub 10-0:1.0: 2 ports detected [ 1.092851] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 1.092936] ahci 0000:01:00.0: flags: 64bit ncq fbs pio [ 1.093740] scsi6 : ahci [ 1.094057] scsi7 : ahci [ 1.094320] scsi8 : ahci [ 1.094581] scsi9 : ahci [ 1.094843] scsi10 : ahci [ 1.095133] scsi11 : ahci [ 1.095388] scsi12 : ahci [ 1.095623] scsi13 : ahci [ 1.095730] ata7: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 75 [ 1.095810] ata8: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 75 [ 1.095887] ata9: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 75 [ 1.095964] ata10: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 75 [ 1.096041] ata11: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 75 [ 1.096118] ata12: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 75 [ 1.096195] ata13: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff400 irq 75 [ 1.096272] ata14: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff480 irq 75 [ 1.096462] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.096541] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.096856] scsi14 : ahci [ 1.097115] scsi15 : ahci [ 1.097232] ata15: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff100 irq 16 [ 1.097313] ata16: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff180 irq 16 [ 1.412916] ata8: SATA link down (SStatus 0 SControl 300) [ 1.413001] ata9: SATA link down (SStatus 0 SControl 300) [ 1.416958] ata10: SATA link down (SStatus 0 SControl 300) [ 1.417039] ata12: SATA link down (SStatus 0 SControl 300) [ 1.417054] ata16: SATA link down (SStatus 0 SControl 300) [ 1.417176] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.417255] ata11: SATA link down (SStatus 0 SControl 300) [ 1.417362] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 [ 1.417648] ata14.00: configured for UDMA/66 [ 1.420870] ata13: SATA link down (SStatus 0 SControl 300) [ 1.420883] ata15: SATA link down (SStatus 0 SControl 300) [ 1.424964] ata7: SATA link down (SStatus 0 SControl 300) [ 1.454190] firewire_core 0000:07:02.0: created device fw0: GUID 001fc600001acd8c, S400 [ 1.565063] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.565144] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.565218] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.565291] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.565363] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.565434] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.566336] ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133 [ 1.566410] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.566494] ata6.00: ATA-8: ST31000528AS, CC38, max UDMA/133 [ 1.566556] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.566666] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133 [ 1.566728] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.566796] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133 [ 1.566859] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.566930] ata5.00: ATA-8: ST31000340AS, SD15, max UDMA/133 [ 1.566992] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.567713] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33 [ 1.567790] ata2.00: applying bridge limits [ 1.568102] ata3.00: configured for UDMA/133 [ 1.568269] ata6.00: configured for UDMA/133 [ 1.570063] ata1.00: configured for UDMA/133 [ 1.570211] ata4.00: configured for UDMA/133 [ 1.570435] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 [ 1.570584] ata5.00: configured for UDMA/133 [ 1.572710] ata2.00: configured for UDMA/33 [ 1.574865] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5 [ 1.575517] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 [ 1.575957] scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 [ 1.576488] scsi 4:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 [ 1.576820] scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 [ 1.577616] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5 [ 1.583764] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.583854] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.583938] scsi 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.584056] scsi 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.584162] scsi 4:0:0:0: Attached scsi generic sg4 type 0 [ 1.584258] scsi 5:0:0:0: Attached scsi generic sg5 type 0 [ 1.584356] scsi 13:0:0:0: Attached scsi generic sg6 type 3 [ 1.584583] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.584738] sd 0:0:0:0: [sda] Write Protect is off [ 1.584799] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.584828] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.588821] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.588909] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.589043] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.589170] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.589179] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.589208] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.589226] sd 3:0:0:0: [sdc] Write Protect is off [ 1.589227] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.589232] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.589270] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.589281] sd 4:0:0:0: [sdd] Write Protect is off [ 1.589283] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.589317] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.589328] sd 5:0:0:0: [sde] Write Protect is off [ 1.589330] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.589354] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.589973] sd 2:0:0:0: [sdb] Write Protect is off [ 1.590035] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.590062] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.594912] sda: sda1 sda2 sda3 [ 1.595522] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.596944] sde: sde1 sde2 sde3 [ 1.597674] sd 5:0:0:0: [sde] Attached SCSI disk [ 1.597871] sdc: sdc1 sdc2 sdc3 [ 1.598533] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.598642] sdd: sdd1 sdd2 sdd3 [ 1.599462] sd 4:0:0:0: [sdd] Attached SCSI disk [ 1.603289] sdb: sdb1 sdb2 sdb3 [ 1.603968] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.728936] tsc: Refined TSC clocksource calibration: 2806.363 MHz [ 1.797109] usb 10-1: new low-speed USB device number 2 using uhci_hcd [ 1.862619] random: nonblocking pool is initialized [ 1.974452] usb 10-1: New USB device found, idVendor=046d, idProduct=c01e [ 1.974521] usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.974602] usb 10-1: Product: USB-PS/2 Optical Mouse [ 1.974661] usb 10-1: Manufacturer: Logitech [ 1.980969] hidraw: raw HID events driver (C) Jiri Kosina [ 1.997580] usbcore: registered new interface driver usbhid [ 1.997644] usbhid: USB HID core driver [ 2.001421] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.0/input/input1 [ 2.001597] hid-generic 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0 [ 2.054534] md: md127 stopped. [ 2.057251] md: bind [ 2.057496] md: bind [ 2.057900] md: bind [ 2.058172] md: bind [ 2.069225] md: bind [ 2.070712] md: raid10 personality registered for level 10 [ 2.071529] md/raid10:md127: active with 4 out of 4 devices [ 2.071736] created bitmap (466 pages) for device md127 [ 2.112065] md127: bitmap initialized from disk: read 30 pages, set 0 of 953616 bits [ 2.139112] md127: detected capacity change from 0 to 1999877701632 [ 2.139234] RAID10 conf printout: [ 2.139235] --- wd:4 rd:4 [ 2.139237] disk 0, wo:0, o:1, dev:sda3 [ 2.139238] disk 1, wo:0, o:1, dev:sdc3 [ 2.139240] disk 2, wo:0, o:1, dev:sdb3 [ 2.139241] disk 3, wo:0, o:1, dev:sdd3 [ 2.140652] md127: unknown partition table [ 2.175795] device-mapper: uevent: version 1.0.3 [ 2.175915] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org [ 2.217251] usb 10-2: new low-speed USB device number 3 using uhci_hcd [ 2.310294] bio: create slab at 1 [ 2.375244] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 2.522645] usb 10-2: New USB device found, idVendor=051d, idProduct=0002 [ 2.522714] usb 10-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.522794] usb 10-2: Product: Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 [ 2.522856] usb 10-2: Manufacturer: American Power Conversion [ 2.522916] usb 10-2: SerialNumber: JB0539032829 [ 2.731242] Switched to clocksource tsc [ 3.593537] hid-generic 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:1d.2-2/input0 [ 13.839354] systemd-udevd[625]: starting version 204 [ 14.427591] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 14.427673] ACPI: Power Button [PWRB] [ 14.427763] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 14.427840] ACPI: Power Button [PWRF] [ 14.439625] ATK0110 ATK0110:00: Overriding interface detection [ 14.460048] wmi: Mapper loaded [ 14.464721] EDAC MC: Ver: 3.0.0 [ 14.477876] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED) [ 14.478006] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED) [ 14.478097] EDAC i7core: Driver loaded, 1 memory controller(s) found. [ 14.489458] systemd-udevd[686]: renamed network interface eth0 to lan [ 14.501227] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251) [ 14.501388] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.501470] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251) [ 14.501627] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.501707] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251) [ 14.501864] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.501944] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 14.511300] [drm] Initialized drm 1.1.0 20060810 [ 14.536083] ACPI Warning: 0x0000000000001000-0x000000000000101f SystemIO conflicts with Region \SMRG 1 (20131115/utaddress-251) [ 14.536244] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.555738] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 14.635305] iTCO_vendor_support: vendor-support=0 [ 14.680094] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 14.680175] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860) [ 14.680314] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 14.705616] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 14.871767] nouveau: unknown parameter 'perflvl_wr' ignored [ 14.871980] MXM: GUID detected in BIOS [ 14.872267] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0c1000a1 [ 14.872329] nouveau [ DEVICE][0000:03:00.0] Chipset: GF108 (NVC1) [ 14.872390] nouveau [ DEVICE][0000:03:00.0] Family : NVC0 [ 14.873338] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image... [ 14.892345] md: bind [ 14.938280] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid [ 14.938344] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN [ 14.938506] nouveau [ VBIOS][0000:03:00.0] BIT signature found [ 14.938568] nouveau [ VBIOS][0000:03:00.0] version 70.08.4d.00.00 [ 14.938844] nouveau 0000:03:00.0: irq 76 for MSI/MSI-X [ 14.938852] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled [ 14.938940] nouveau W[ PFB][0000:03:00.0][0x00000000][ffff88061d590000] reclocking of this ram type unsupported [ 14.939052] nouveau [ PFB][0000:03:00.0] RAM type: DDR3 [ 14.939139] nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB [ 14.939227] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags [ 14.943231] snd_hda_intel 0000:00:1b.0: irq 77 for MSI/MSI-X [ 14.947573] md: bind [ 14.970337] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external [ 14.970435] nouveau [ PTHERM][0000:03:00.0] fan management: automatic [ 14.970527] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes [ 14.970641] nouveau [ CLK][0000:03:00.0] 03: core 50 MHz memory 135 MHz [ 14.970733] nouveau [ CLK][0000:03:00.0] 07: core 405 MHz memory 324 MHz [ 14.970840] nouveau [ CLK][0000:03:00.0] 0f: core 810 MHz memory 900 MHz [ 14.971088] nouveau [ CLK][0000:03:00.0] --: core 405 MHz memory 324 MHz [ 14.979269] [TTM] Zone kernel: Available graphics memory: 12368142 kiB [ 14.979359] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 14.979448] [TTM] Initializing pool allocator [ 14.979535] [TTM] Initializing DMA pool allocator [ 14.979626] nouveau [ DRM] VRAM: 512 MiB [ 14.979712] nouveau [ DRM] GART: 1048576 MiB [ 14.979799] nouveau [ DRM] TMDS table version 2.0 [ 14.979887] nouveau [ DRM] DCB version 4.0 [ 14.979973] nouveau [ DRM] DCB outp 00: 01000302 00020030 [ 14.980061] nouveau [ DRM] DCB outp 01: 02000300 00000000 [ 14.980149] nouveau [ DRM] DCB outp 02: 08011392 00020020 [ 14.980237] nouveau [ DRM] DCB outp 03: 04022310 00000000 [ 14.980325] nouveau [ DRM] DCB conn 00: 00001030 [ 14.980474] nouveau [ DRM] DCB conn 01: 00002161 [ 14.980623] nouveau [ DRM] DCB conn 02: 00000200 [ 14.981610] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 14.981700] [drm] No driver support for vblank timestamp query. [ 14.996303] nouveau [ DRM] MM: using COPY0 for buffer copies [ 15.005413] md: bind [ 15.008206] md: bind [ 15.043483] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 15.043641] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 15.043787] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 15.043937] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 15.044083] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 15.044227] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 15.044372] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 15.044514] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 15.090263] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88061fbc5c00 [ 15.090414] fbcon: nouveaufb (fb0) is primary device [ 15.096053] md: bind [ 15.142331] md: raid1 personality registered for level 1 [ 15.142630] md/raid1:md0: active with 5 out of 5 mirrors [ 15.142756] created bitmap (16 pages) for device md0 [ 15.143289] md0: bitmap initialized from disk: read 2 pages, set 0 of 32096 bits [ 15.158765] md0: detected capacity change from 0 to 131465216 [ 15.158830] RAID1 conf printout: [ 15.158831] --- wd:5 rd:5 [ 15.158832] disk 0, wo:0, o:1, dev:sda1 [ 15.158834] disk 1, wo:0, o:1, dev:sdc1 [ 15.158835] disk 2, wo:0, o:1, dev:sdb1 [ 15.158836] disk 3, wo:0, o:1, dev:sdd1 [ 15.158838] disk 4, wo:0, o:1, dev:sde1 [ 15.161088] md0: unknown partition table [ 15.169957] Console: switching to colour frame buffer device 128x48 [ 15.171037] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device [ 15.171049] nouveau 0000:03:00.0: registered panic notifier [ 15.171065] [drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0 [ 15.171158] hda_intel: Disabling MSI [ 15.171178] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client [ 15.985619] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16 [ 15.985855] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15 [ 15.986079] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14 [ 15.986309] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13 [ 16.618195] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 16.967621] RAID10 conf printout: [ 16.967627] --- wd:4 rd:4 [ 16.967631] disk 0, wo:0, o:1, dev:sda3 [ 16.967634] disk 1, wo:0, o:1, dev:sdc3 [ 16.967637] disk 2, wo:0, o:1, dev:sdb3 [ 16.967640] disk 3, wo:0, o:1, dev:sdd3 [ 17.082706] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro [ 17.492574] loop: module loaded [ 18.896517] Adding 5857276k swap on /dev/mapper/Zia-swap_crypt. Priority:-1 extents:1 across:5857276k [ 20.012569] EXT4-fs (md0): mounting ext2 file system using the ext4 subsystem [ 20.059635] EXT4-fs (md0): mounted filesystem without journal. Opts: (null) [ 20.128415] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: user_xattr [ 20.135680] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr [ 20.244279] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 20.333238] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 20.388560] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 20.444331] FAT-fs (sdd2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 21.412118] Bridge firewalling registered [ 21.415269] device lan entered promiscuous mode [ 21.427959] r8169 0000:07:01.0 lan: link down [ 21.427971] r8169 0000:07:01.0 lan: link down [ 21.428481] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready [ 21.430800] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 24.341372] r8169 0000:07:01.0 lan: link up [ 24.341629] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready [ 24.342533] br0: port 1(lan) entered forwarding state [ 24.343999] br0: port 1(lan) entered forwarding state [ 24.345446] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 25.473310] RPC: Registered named UNIX socket transport module. [ 25.473448] RPC: Registered udp transport module. [ 25.473595] RPC: Registered tcp transport module. [ 25.474057] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 25.489622] FS-Cache: Loaded [ 25.517937] FS-Cache: Netfs 'nfs' registered for caching [ 25.565226] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org). [ 26.137517] tun: Universal TUN/TAP device driver, 1.6 [ 26.137660] tun: (C) 1999-2004 Max Krasnyansky [ 26.344703] br0: port 1(lan) entered forwarding state [ 37.114777] CacheFiles: Loaded [ 38.078498] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 38.085722] NFSD: starting 90-second grace period (net ffffffff81885e00) [ 38.947421] lp: driver loaded but no devices found [ 38.968982] ppdev: user-space parallel port driver --------------080304010705010106040704 Content-Type: text/plain; charset=UTF-8; name="dmesg-vtd-on" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg-vtd-on" [ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-rc8+ (anthony@Zia) (gcc version 4.8.2 (Debian 4.8.2-12) ) #5 SMP Mon Jan 13 16:59:58 EST 2014 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro verbose transparent_hugepage=always [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e2c00-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH X58, BIOS 1402 08/09/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EBFFF write-through [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask E00000000 write-back [ 0.000000] 2 base 600000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE [ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE [ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x63fe00000-0x63fffffff] [ 0.000000] [mem 0x63fe00000-0x63fffffff] page 2M [ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x63c000000-0x63fdfffff] [ 0.000000] [mem 0x63c000000-0x63fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x600000000-0x63bffffff] [ 0.000000] [mem 0x600000000-0x63bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M [ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x5ffffffff] [ 0.000000] [mem 0x100000000-0x5ffffffff] page 2M [ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE [ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x362b4000-0x37151fff] [ 0.000000] ACPI: RSDP 00000000000fb940 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bf780100 00006C (v01 080912 XSDT1157 20120809 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v03 080912 FACP1157 20120809 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf7804b0 00C469 (v01 A1682 A1682001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf798000 000040 [ 0.000000] ACPI: APIC 00000000bf780390 0000D8 (v01 080912 APIC1157 20120809 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf780470 00003C (v01 080912 OEMMCFG 20120809 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf798040 000072 (v01 080912 OEMB1157 20120809 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bf78f4b0 000038 (v01 080912 OEMHPET 20120809 MSFT 00000097) [ 0.000000] ACPI: DMAR 00000000bf7980c0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: ASPT 00000000bf7984b0 000034 (v06 080912 PerfTune 20120809 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 080912 OEMOSFR 20120809 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf79a970 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000063fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x63fffffff] [ 0.000000] NODE_DATA [mem 0x63ffe6000-0x63ffeafff] [ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880627600000-ffff88063c5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x63fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0xbf77ffff] [ 0.000000] node 0: [mem 0x100000000-0x63fffffff] [ 0.000000] On node 0 totalpages: 6289181 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10667 pages used for memmap [ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31 [ 0.000000] Normal zone: 75264 pages used for memmap [ 0.000000] Normal zone: 5505024 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7d9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf7da000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88063fc00000 s85824 r8192 d20672 u131072 [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6203173 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro verbose transparent_hugepage=always [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 24718520K/25156724K available (4799K kernel code, 692K rwdata, 1592K rodata, 988K init, 952K bss, 438204K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16. [ 0.000000] NR_IRQS:33024 nr_irqs:1216 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 100663296 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.016000] tsc: Unable to calibrate against PIT [ 0.016000] tsc: using HPET reference calibration [ 0.016000] tsc: Detected 2806.296 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5612.59 BogoMIPS (lpj=11225184) [ 0.000125] pid_max: default: 32768 minimum: 301 [ 0.000218] Security Framework initialized [ 0.000279] AppArmor: AppArmor disabled by boot time parameter [ 0.000340] Yama: becoming mindful. [ 0.002290] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.008543] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.013895] Mount-cache hash table entries: 256 [ 0.014116] Initializing cgroup subsys memory [ 0.014179] Initializing cgroup subsys devices [ 0.014239] Initializing cgroup subsys freezer [ 0.014299] Initializing cgroup subsys blkio [ 0.014358] Initializing cgroup subsys perf_event [ 0.014435] CPU: Physical Processor ID: 0 [ 0.014494] CPU: Processor Core ID: 0 [ 0.014555] mce: CPU supports 9 MCE banks [ 0.014623] CPU0: Thermal monitoring enabled (TM1) [ 0.014692] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.014692] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.014692] tlb_flushall_shift: 6 [ 0.014858] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000) [ 0.015945] ACPI: Core revision 20131115 [ 0.019435] ACPI: All ACPI Tables successfully acquired [ 0.063692] dmar: Host address width 39 [ 0.063753] dmar: DRHD base: 0x000000fbfff000 flags: 0x0 [ 0.063820] dmar: IOMMU 0: reg_base_addr fbfff000 ver 1:0 cap c9008010e60262 ecap f0207a [ 0.063900] dmar: DRHD base: 0x000000fbffe000 flags: 0x1 [ 0.063965] dmar: IOMMU 1: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020fe [ 0.064045] dmar: RMRR base: 0x000000000ec000 end: 0x000000000effff [ 0.064108] dmar: RMRR base: 0x000000bf7ea000 end: 0x000000bf7fffff [ 0.064171] dmar: ATSR flags: 0x0 [ 0.064324] This system BIOS has enabled interrupt remapping [ 0.064324] on a chipset that contains an erratum making that [ 0.064324] feature unstable. To maintain system stability [ 0.064324] interrupt remapping is being disabled. Please [ 0.064324] contact your BIOS vendor for an update [ 0.064324] Ignoring and leaving enabled anyway! [ 0.064500] IOAPIC id 8 under DRHD base 0xfbffe000 IOMMU 1 [ 0.064562] IOAPIC id 9 under DRHD base 0xfbffe000 IOMMU 1 [ 0.064800] Enabled IRQ remapping in xapic mode [ 0.064862] Switched APIC routing to physical flat. [ 0.065480] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.105236] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05) [ 0.213081] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver. [ 0.213315] perf_event_intel: CPU erratum AAJ80 worked around [ 0.213377] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.213442] ... version: 3 [ 0.213501] ... bit width: 48 [ 0.213559] ... generic registers: 4 [ 0.213618] ... value mask: 0000ffffffffffff [ 0.213678] ... max period: 000000007fffffff [ 0.213739] ... fixed-purpose events: 3 [ 0.213797] ... event mask: 000000070000000f [ 0.214203] x86: Booting SMP configuration: [ 0.228684] CPU1 microcode updated early to revision 0x19, date = 2013-06-21 [ 0.230877] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.246258] CPU2 microcode updated early to revision 0x19, date = 2013-06-21 [ 0.262803] CPU3 microcode updated early to revision 0x19, date = 2013-06-21 [ 0.214264] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.323264] x86: Booted up 1 node, 8 CPUs [ 0.323376] smpboot: Total of 8 processors activated (44900.73 BogoMIPS) [ 0.329758] devtmpfs: initialized [ 0.333261] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes) [ 0.333489] NET: Registered protocol family 16 [ 0.333619] cpuidle: using governor ladder [ 0.333678] cpuidle: using governor menu [ 0.333758] ACPI: bus type PCI registered [ 0.333816] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.333946] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.334028] PCI: not using MMCONFIG [ 0.334086] PCI: Using configuration type 1 for base access [ 0.334869] bio: create slab at 0 [ 0.335037] ACPI: Added _OSI(Module Device) [ 0.335097] ACPI: Added _OSI(Processor Device) [ 0.335155] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.335215] ACPI: Added _OSI(Processor Aggregator Device) [ 0.336890] ACPI: Executed 1 blocks of module-level executable AML code [ 0.369156] ACPI: SSDT 00000000bf7984f0 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.369601] ACPI: Dynamic OEM Table Load: [ 0.369733] ACPI: SSDT (null) 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.369960] ACPI: SSDT 00000000bf79a310 000659 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 0.370313] ACPI: Dynamic OEM Table Load: [ 0.370446] ACPI: SSDT (null) 000659 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 0.370768] ACPI: Interpreter enabled [ 0.370833] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.370997] ACPI: (supports S0 S1 S3 S4 S5) [ 0.371056] ACPI: Using IOAPIC for interrupt routing [ 0.371133] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.372067] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.386010] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.386201] ACPI: No dock devices found. [ 0.394051] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.394118] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.394201] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.394556] PCI host bridge to bus 0000:00 [ 0.394616] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.394678] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.394740] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.394802] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.394866] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.394930] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff] [ 0.394993] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff] [ 0.395065] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000 [ 0.395108] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.395176] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 0.395220] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.395265] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.395352] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400 [ 0.395396] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.395440] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.395526] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 0.395570] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.395614] pci 0000:00:03.0: System wakeup disabled by ACPI [ 0.395704] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 [ 0.395744] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.395788] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.395879] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 0.395969] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 0.396058] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 0.396144] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000 [ 0.396230] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 0.396267] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f] [ 0.396349] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.396436] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 0.396475] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f] [ 0.396559] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.396646] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 0.396682] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f] [ 0.396763] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.396857] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 0.396876] pci 0000:00:1a.7: reg 0x10: [mem 0xf9dff000-0xf9dff3ff] [ 0.396954] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.397001] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.397090] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 0.397103] pci 0000:00:1b.0: reg 0x10: [mem 0xf9df8000-0xf9dfbfff 64bit] [ 0.397163] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.397231] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 0.397289] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.397336] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.397425] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400 [ 0.397483] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.397529] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.397618] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 0.397654] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f] [ 0.397736] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.397824] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 0.397860] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f] [ 0.397941] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.398028] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 0.398065] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f] [ 0.398146] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.398240] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 0.398259] pci 0000:00:1d.7: reg 0x10: [mem 0xf9dfe000-0xf9dfe3ff] [ 0.398337] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.398384] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.398469] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.398548] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.398636] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 0.398704] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000] [ 0.398796] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.398861] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.399031] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601 [ 0.399047] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07] [ 0.399054] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883] [ 0.399060] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807] [ 0.399067] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483] [ 0.399073] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f] [ 0.399080] pci 0000:00:1f.2: reg 0x24: [mem 0xf9dfc000-0xf9dfc7ff] [ 0.399119] pci 0000:00:1f.2: PME# supported from D3hot [ 0.399185] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 0.399198] pci 0000:00:1f.3: reg 0x10: [mem 0xf9dfd000-0xf9dfd0ff 64bit] [ 0.399216] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f] [ 0.399325] pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601 [ 0.399334] pci 0000:01:00.0: reg 0x10: [io 0xbc00-0xbc07] [ 0.399340] pci 0000:01:00.0: reg 0x14: [io 0xb880-0xb883] [ 0.399347] pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb807] [ 0.399353] pci 0000:01:00.0: reg 0x1c: [io 0xb480-0xb483] [ 0.399359] pci 0000:01:00.0: reg 0x20: [io 0xb400-0xb40f] [ 0.399366] pci 0000:01:00.0: reg 0x24: [mem 0xf9eff000-0xf9eff7ff] [ 0.399373] pci 0000:01:00.0: reg 0x30: [mem 0xf9ee0000-0xf9eeffff pref] [ 0.399400] pci 0000:01:00.0: PME# supported from D3hot [ 0.405140] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.405207] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.405209] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.405259] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.405274] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit] [ 0.405345] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.413158] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.413229] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.413290] pci 0000:03:00.0: [10de:0de0] type 00 class 0x030000 [ 0.413299] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.413308] pci 0000:03:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.413317] pci 0000:03:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref] [ 0.413323] pci 0000:03:00.0: reg 0x24: [io 0xcc00-0xcc7f] [ 0.413330] pci 0000:03:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref] [ 0.413400] pci 0000:03:00.1: [10de:0bea] type 00 class 0x040300 [ 0.413409] pci 0000:03:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff] [ 0.421156] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.421222] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.421228] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff] [ 0.421232] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref] [ 0.421267] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.421372] pci 0000:00:1c.0: PCI bridge to [bus 06] [ 0.421439] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.421518] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185 [ 0.421545] pci 0000:05:00.0: reg 0x10: [io 0xdc00-0xdc07] [ 0.421558] pci 0000:05:00.0: reg 0x14: [io 0xd880-0xd883] [ 0.421570] pci 0000:05:00.0: reg 0x18: [io 0xd800-0xd807] [ 0.421583] pci 0000:05:00.0: reg 0x1c: [io 0xd480-0xd483] [ 0.421595] pci 0000:05:00.0: reg 0x20: [io 0xd400-0xd40f] [ 0.421608] pci 0000:05:00.0: reg 0x24: [mem 0xfbdff000-0xfbdff1ff] [ 0.421621] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.421669] pci 0000:05:00.0: PME# supported from D3hot [ 0.429177] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.429247] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.429250] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.429303] pci 0000:07:01.0: [10ec:8167] type 00 class 0x020000 [ 0.429321] pci 0000:07:01.0: reg 0x10: [io 0xe800-0xe8ff] [ 0.429329] pci 0000:07:01.0: reg 0x14: [mem 0xfbeff000-0xfbeff0ff] [ 0.429364] pci 0000:07:01.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref] [ 0.429397] pci 0000:07:01.0: supports D1 D2 [ 0.429399] pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold [ 0.429440] pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010 [ 0.429455] pci 0000:07:02.0: reg 0x10: [mem 0xfbefe000-0xfbefe7ff] [ 0.429464] pci 0000:07:02.0: reg 0x14: [io 0xec00-0xec7f] [ 0.429525] pci 0000:07:02.0: supports D2 [ 0.429527] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold [ 0.429583] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 0.429648] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.429651] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.429656] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.429657] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.429659] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.429661] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.429662] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 0.429664] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode) [ 0.430102] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.430611] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.431120] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.431628] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.432135] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.432644] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.433152] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15) [ 0.433663] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.434208] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.434347] ACPI: \_SB_.PCI0: notify handler is installed [ 0.434378] Found 1 acpi root devices [ 0.434448] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.434527] vgaarb: loaded [ 0.434583] vgaarb: bridge control possible 0000:03:00.0 [ 0.434673] PCI: Using ACPI for IRQ routing [ 0.441771] PCI: Discovered peer bus ff [ 0.441832] PCI: root bus ff: using default resources [ 0.441833] PCI: Probing PCI hardware (bus ff) [ 0.441861] PCI host bridge to bus 0000:ff [ 0.441921] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] [ 0.441983] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff] [ 0.442047] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff] [ 0.442130] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000 [ 0.442166] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000 [ 0.442196] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000 [ 0.442224] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000 [ 0.442254] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000 [ 0.442282] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000 [ 0.442310] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000 [ 0.442339] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000 [ 0.442368] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000 [ 0.442396] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000 [ 0.442424] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000 [ 0.442453] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000 [ 0.442481] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000 [ 0.442514] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000 [ 0.442541] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000 [ 0.442570] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000 [ 0.442598] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000 [ 0.442625] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000 [ 0.442653] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000 [ 0.442689] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff [ 0.442693] PCI: pci_cache_line_size set to 64 bytes [ 0.442765] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.442767] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff] [ 0.442855] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.442921] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.443167] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.447119] Switched to clocksource hpet [ 0.448454] pnp: PnP ACPI init [ 0.448523] ACPI: bus type PNP registered [ 0.448633] system 00:00: [mem 0xfbf00000-0xfbffffff] could not be reserved [ 0.448698] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 0.448761] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 0.448824] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved [ 0.448888] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved [ 0.448951] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved [ 0.449015] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.449053] pnp 00:01: [dma 4] [ 0.449067] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.449095] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.449111] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.449134] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.449219] system 00:05: [io 0x0290-0x029f] has been reserved [ 0.449282] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.449459] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.449522] system 00:06: [io 0x0800-0x087f] could not be reserved [ 0.449585] system 00:06: [io 0x0500-0x057f] could not be reserved [ 0.449648] system 00:06: [io 0x0600-0x0607] has been reserved [ 0.449710] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.449773] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.449837] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved [ 0.449900] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.449965] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.450013] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active) [ 0.450065] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved [ 0.450130] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.450210] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.450275] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.450338] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.450493] pnp 00:0b: [dma 0 disabled] [ 0.450540] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.450582] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.450642] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 0.450706] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.450857] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.450922] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.450986] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.451050] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.451114] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.451183] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.451281] pnp: PnP ACPI: found 15 devices [ 0.451340] ACPI: bus type PNP unregistered [ 0.458308] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 0.458312] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000 [ 0.458320] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 05] add_size 200000 [ 0.458334] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment [ 0.458400] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000 [ 0.458402] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000 [ 0.458404] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.458407] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff] [ 0.458471] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc06fffff pref] [ 0.458550] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.458613] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.458674] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.458738] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff] [ 0.458805] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.458866] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff] [ 0.458933] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.458994] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.459058] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff] [ 0.459131] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref] [ 0.459213] pci 0000:00:07.0: PCI bridge to [bus 04] [ 0.459278] pci 0000:00:1c.0: PCI bridge to [bus 06] [ 0.459339] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.459403] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff] [ 0.459468] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.459550] pci 0000:05:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref] [ 0.459628] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.459689] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.459753] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.459818] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc06fffff pref] [ 0.459899] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 0.459960] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.460024] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.460092] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.460094] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.460095] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.460096] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.460098] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff] [ 0.460099] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff] [ 0.460101] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.460103] pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff] [ 0.460104] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff] [ 0.460106] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.460107] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbcfffff] [ 0.460109] pci_bus 0000:03: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref] [ 0.460110] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.460112] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff] [ 0.460113] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.460115] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.460117] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.460118] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc06fffff pref] [ 0.460120] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.460121] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.460123] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7] [ 0.460124] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff] [ 0.460126] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff] [ 0.460127] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff] [ 0.460128] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff] [ 0.460130] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff] [ 0.460133] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff] [ 0.460135] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff] [ 0.460213] NET: Registered protocol family 2 [ 0.460539] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.461056] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.461230] TCP: Hash tables configured (established 262144 bind 65536) [ 0.461307] TCP: reno registered [ 0.461389] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.461556] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.461774] NET: Registered protocol family 1 [ 0.464540] pci 0000:03:00.0: Boot video device [ 0.464554] PCI: CLS mismatch (256 != 64), using 64 bytes [ 0.464603] Unpacking initramfs... [ 0.736646] Freeing initrd memory: 14968K (ffff8800362b4000 - ffff880037152000) [ 0.736750] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.736813] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff] [ 0.737121] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19 [ 0.737187] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19 [ 0.737253] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19 [ 0.737319] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19 [ 0.737384] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19 [ 0.737450] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19 [ 0.737515] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19 [ 0.737581] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19 [ 0.737678] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.738041] audit: initializing netlink socket (disabled) [ 0.738109] type=2000 audit(1389652889.600:1): initialized [ 0.752758] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.753588] VFS: Disk quotas dquot_6.5.2 [ 0.753674] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.753805] msgmni has been set to 32768 [ 0.754077] alg: No test for stdrng (krng) [ 0.754157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.754270] io scheduler noop registered [ 0.754328] io scheduler deadline registered [ 0.754407] io scheduler cfq registered (default) [ 0.754636] pcieport 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.754824] pcieport 0000:00:1c.0: irq 66 for MSI/MSI-X [ 0.756806] pcieport 0000:00:1c.4: irq 67 for MSI/MSI-X [ 0.756885] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.756957] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.757040] intel_idle: MWAIT substates: 0x1120 [ 0.757051] intel_idle: v0.4 model 0x1A [ 0.757051] intel_idle: lapic_timer_reliable_states 0x2 [ 0.757218] GHES: HEST is not enabled! [ 0.757327] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.779389] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.779781] Linux agpgart interface v0.103 [ 0.779936] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.779999] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.780559] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.780691] mousedev: PS/2 mouse device common for all mice [ 0.780782] rtc_cmos 00:02: RTC can wake from S4 [ 0.780943] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.781026] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.781111] AMD IOMMUv2 driver by Joerg Roedel [ 0.781174] AMD IOMMUv2 functionality not available on this system [ 0.781307] TCP: cubic registered [ 0.781544] NET: Registered protocol family 10 [ 0.781778] mip6: Mobile IPv6 [ 0.781835] NET: Registered protocol family 17 [ 0.781895] mpls_gso: MPLS GSO support [ 0.782179] registered taskstats version 1 [ 0.783153] rtc_cmos 00:02: setting system clock to 2014-01-13 22:41:30 UTC (1389652890) [ 0.783258] PM: Hibernation image not present or could not be loaded. [ 0.783874] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000) [ 0.783953] Write protecting the kernel read-only data: 8192k [ 0.787091] Freeing unused kernel memory: 1332K (ffff8800014b3000 - ffff880001600000) [ 0.789984] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000) [ 0.803476] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.849769] systemd-udevd[95]: starting version 204 [ 0.865521] SCSI subsystem initialized [ 0.868249] ACPI: bus type USB registered [ 0.868332] usbcore: registered new interface driver usbfs [ 0.868407] usbcore: registered new interface driver hub [ 0.868501] usbcore: registered new device driver usb [ 0.868960] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.869285] uhci_hcd: USB Universal Host Controller Interface driver [ 0.869367] ehci-pci: EHCI PCI platform driver [ 0.869516] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.869586] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.869705] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800 [ 0.869815] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.869881] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.869963] usb usb1: Product: UHCI Host Controller [ 0.870025] usb usb1: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd [ 0.870090] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.870269] hub 1-0:1.0: USB hub found [ 0.870338] hub 1-0:1.0: 2 ports detected [ 0.870451] libata version 3.00 loaded. [ 0.870478] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.870553] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 0.870627] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.870632] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 0.870669] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880 [ 0.870720] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.870721] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.870723] usb usb3: Product: UHCI Host Controller [ 0.870724] usb usb3: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd [ 0.870725] usb usb3: SerialNumber: 0000:00:1a.1 [ 0.870818] hub 3-0:1.0: USB hub found [ 0.870823] hub 3-0:1.0: 2 ports detected [ 0.871021] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.871027] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4 [ 0.872850] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00 [ 0.872906] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.872907] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.872909] usb usb4: Product: UHCI Host Controller [ 0.872910] usb usb4: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd [ 0.872911] usb usb4: SerialNumber: 0000:00:1a.2 [ 0.873086] hub 4-0:1.0: USB hub found [ 0.873092] hub 4-0:1.0: 2 ports detected [ 0.873310] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.873314] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.873348] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080 [ 0.873449] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.873451] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.873452] usb usb5: Product: UHCI Host Controller [ 0.873454] usb usb5: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd [ 0.873455] usb usb5: SerialNumber: 0000:00:1d.0 [ 0.873540] hub 5-0:1.0: USB hub found [ 0.873547] hub 5-0:1.0: 2 ports detected [ 0.873741] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.873746] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.873770] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 [ 0.873815] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.873817] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.873818] usb usb6: Product: UHCI Host Controller [ 0.873819] usb usb6: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd [ 0.873821] usb usb6: SerialNumber: 0000:00:1d.1 [ 0.873909] hub 6-0:1.0: USB hub found [ 0.873916] hub 6-0:1.0: 2 ports detected [ 0.875118] xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X [ 0.875128] xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X [ 0.875136] xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X [ 0.875144] xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X [ 0.875152] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X [ 0.875160] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X [ 0.875168] xhci_hcd 0000:02:00.0: irq 74 for MSI/MSI-X [ 0.875176] xhci_hcd 0000:02:00.0: irq 75 for MSI/MSI-X [ 0.875952] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.876018] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.876096] usb usb2: Product: xHCI Host Controller [ 0.876157] usb usb2: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd [ 0.876218] usb usb2: SerialNumber: 0000:02:00.0 [ 0.876407] hub 2-0:1.0: USB hub found [ 0.876477] hub 2-0:1.0: 2 ports detected [ 0.876608] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.876672] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 7 [ 0.876780] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.876844] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 8 [ 0.876932] ehci-pci 0000:00:1a.7: debug port 1 [ 0.878310] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.878439] r8169 0000:07:01.0 (unregistered net_device): not PCI Express [ 0.878567] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.878640] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.878721] usb usb7: Product: xHCI Host Controller [ 0.878757] r8169 0000:07:01.0 eth0: RTL8169sc/8110sc at 0xffffc90003074000, 54:04:a6:49:30:b0, XID 18000000 IRQ 19 [ 0.878759] r8169 0000:07:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok] [ 0.878953] usb usb7: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd [ 0.879019] usb usb7: SerialNumber: 0000:02:00.0 [ 0.879209] hub 7-0:1.0: USB hub found [ 0.879296] hub 7-0:1.0: 2 ports detected [ 0.880886] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 0.880897] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff000 [ 0.891320] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.891422] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.891489] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.891571] usb usb8: Product: EHCI Host Controller [ 0.891634] usb usb8: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd [ 0.891699] usb usb8: SerialNumber: 0000:00:1a.7 [ 0.891873] hub 8-0:1.0: USB hub found [ 0.891943] hub 8-0:1.0: 6 ports detected [ 0.915485] hub 1-0:1.0: USB hub found [ 0.915550] hub 1-0:1.0: 2 ports detected [ 0.939414] hub 3-0:1.0: USB hub found [ 0.939480] hub 3-0:1.0: 2 ports detected [ 0.951476] firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 0.963469] hub 4-0:1.0: USB hub found [ 0.963538] hub 4-0:1.0: 2 ports detected [ 0.963877] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.963942] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9 [ 0.964030] ehci-pci 0000:00:1d.7: debug port 1 [ 0.967976] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.967982] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dfe000 [ 0.979507] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.979599] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.979674] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.979752] usb usb9: Product: EHCI Host Controller [ 0.979812] usb usb9: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd [ 0.979874] usb usb9: SerialNumber: 0000:00:1d.7 [ 0.980177] hub 9-0:1.0: USB hub found [ 0.980245] hub 9-0:1.0: 6 ports detected [ 1.003473] hub 5-0:1.0: USB hub found [ 1.003544] hub 5-0:1.0: 2 ports detected [ 1.027516] hub 6-0:1.0: USB hub found [ 1.027582] hub 6-0:1.0: 2 ports detected [ 1.027914] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.027982] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10 [ 1.028084] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480 [ 1.028179] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.028243] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.028321] usb usb10: Product: UHCI Host Controller [ 1.028382] usb usb10: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd [ 1.028444] usb usb10: SerialNumber: 0000:00:1d.2 [ 1.028589] hub 10-0:1.0: USB hub found [ 1.028653] hub 10-0:1.0: 2 ports detected [ 1.028852] ahci 0000:00:1f.2: version 3.0 [ 1.029062] ahci 0000:00:1f.2: irq 76 for MSI/MSI-X [ 1.029067] ahci 0000:00:1f.2: irq 77 for MSI/MSI-X [ 1.029071] ahci 0000:00:1f.2: irq 78 for MSI/MSI-X [ 1.029075] ahci 0000:00:1f.2: irq 79 for MSI/MSI-X [ 1.029079] ahci 0000:00:1f.2: irq 80 for MSI/MSI-X [ 1.029083] ahci 0000:00:1f.2: irq 81 for MSI/MSI-X [ 1.029087] ahci 0000:00:1f.2: irq 82 for MSI/MSI-X [ 1.029091] ahci 0000:00:1f.2: irq 83 for MSI/MSI-X [ 1.029095] ahci 0000:00:1f.2: irq 84 for MSI/MSI-X [ 1.029099] ahci 0000:00:1f.2: irq 85 for MSI/MSI-X [ 1.029102] ahci 0000:00:1f.2: irq 86 for MSI/MSI-X [ 1.029106] ahci 0000:00:1f.2: irq 87 for MSI/MSI-X [ 1.029110] ahci 0000:00:1f.2: irq 88 for MSI/MSI-X [ 1.029114] ahci 0000:00:1f.2: irq 89 for MSI/MSI-X [ 1.029118] ahci 0000:00:1f.2: irq 90 for MSI/MSI-X [ 1.029122] ahci 0000:00:1f.2: irq 91 for MSI/MSI-X [ 1.029191] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.029275] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs [ 1.069168] scsi0 : ahci [ 1.069556] scsi1 : ahci [ 1.069809] scsi2 : ahci [ 1.070035] scsi3 : ahci [ 1.072090] scsi4 : ahci [ 1.072341] scsi5 : ahci [ 1.072462] ata1: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc100 irq 76 [ 1.072546] ata2: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc180 irq 77 [ 1.072625] ata3: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc200 irq 78 [ 1.072703] ata4: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc280 irq 79 [ 1.072782] ata5: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc300 irq 80 [ 1.072860] ata6: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc380 irq 81 [ 1.073026] ahci 0000:01:00.0: irq 92 for MSI/MSI-X [ 1.073037] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS [ 1.088425] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 1.088508] ahci 0000:01:00.0: flags: 64bit ncq fbs pio [ 1.089261] scsi6 : ahci [ 1.089470] scsi7 : ahci [ 1.089677] scsi8 : ahci [ 1.089884] scsi9 : ahci [ 1.090106] scsi10 : ahci [ 1.090324] scsi11 : ahci [ 1.090500] scsi12 : ahci [ 1.090668] scsi13 : ahci [ 1.090779] ata7: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 92 [ 1.090863] ata8: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 92 [ 1.090941] ata9: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 92 [ 1.091020] ata10: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 92 [ 1.091099] ata11: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 92 [ 1.091177] ata12: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 92 [ 1.091256] ata13: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff400 irq 92 [ 1.091341] ata14: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff480 irq 92 [ 1.091536] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.091618] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.091929] scsi14 : ahci [ 1.092064] scsi15 : ahci [ 1.092157] ata15: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff100 irq 16 [ 1.092238] ata16: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff180 irq 16 [ 1.411641] ata8: SATA link down (SStatus 0 SControl 300) [ 1.411660] ata15: SATA link down (SStatus 0 SControl 300) [ 1.411697] ata16: SATA link down (SStatus 0 SControl 300) [ 1.411849] ata12: SATA link down (SStatus 0 SControl 300) [ 1.411925] ata10: SATA link down (SStatus 0 SControl 300) [ 1.412002] ata11: SATA link down (SStatus 0 SControl 300) [ 1.412077] ata9: SATA link down (SStatus 0 SControl 300) [ 1.412153] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.412230] ata13: SATA link down (SStatus 0 SControl 300) [ 1.412303] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 [ 1.412589] ata14.00: configured for UDMA/66 [ 1.420153] ata7: SATA link down (SStatus 0 SControl 300) [ 1.453411] firewire_core 0000:07:02.0: created device fw0: GUID 001fc600001acd8c, S400 [ 1.563698] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.563781] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.563855] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.563929] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.564002] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.565155] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133 [ 1.565223] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.565341] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133 [ 1.565405] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.565515] ata6.00: ATA-8: ST31000528AS, CC38, max UDMA/133 [ 1.565579] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.565737] ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133 [ 1.565840] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.566642] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33 [ 1.566711] ata2.00: applying bridge limits [ 1.566925] ata4.00: configured for UDMA/133 [ 1.567108] ata1.00: configured for UDMA/133 [ 1.567215] ata6.00: configured for UDMA/133 [ 1.567292] ata3.00: configured for UDMA/133 [ 1.567469] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 [ 1.567522] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.569960] ata5.00: ATA-8: ST31000340AS, SD15, max UDMA/133 [ 1.570027] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.570143] ata2.00: configured for UDMA/33 [ 1.572288] ata5.00: configured for UDMA/133 [ 1.572792] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5 [ 1.573316] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 [ 1.573729] scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 [ 1.574245] scsi 4:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 [ 1.574661] scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 [ 1.575264] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5 [ 1.580591] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.580686] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.580780] scsi 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.580873] scsi 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.580982] scsi 4:0:0:0: Attached scsi generic sg4 type 0 [ 1.581077] scsi 5:0:0:0: Attached scsi generic sg5 type 0 [ 1.581167] scsi 13:0:0:0: Attached scsi generic sg6 type 3 [ 1.581468] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.581605] sd 0:0:0:0: [sda] Write Protect is off [ 1.581667] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.581690] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.585973] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.586054] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.586210] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.586330] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.586356] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.586368] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.586387] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 1.586449] sd 3:0:0:0: [sdc] Write Protect is off [ 1.586451] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.586465] sd 4:0:0:0: [sdd] Write Protect is off [ 1.586467] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.586475] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.586485] sd 5:0:0:0: [sde] Write Protect is off [ 1.586487] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.586497] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.586509] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.587245] sd 2:0:0:0: [sdb] Write Protect is off [ 1.587307] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.587338] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.588698] sdc: sdc1 sdc2 sdc3 [ 1.589496] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.590906] sda: sda1 sda2 sda3 [ 1.591865] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.593481] sde: sde1 sde2 sde3 [ 1.594276] sdd: sdd1 sdd2 sdd3 [ 1.594314] sd 5:0:0:0: [sde] Attached SCSI disk [ 1.594932] sd 4:0:0:0: [sdd] Attached SCSI disk [ 1.600418] sdb: sdb1 sdb2 sdb3 [ 1.603051] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.739569] tsc: Refined TSC clocksource calibration: 2806.362 MHz [ 1.787798] usb 10-1: new low-speed USB device number 2 using uhci_hcd [ 1.863838] random: nonblocking pool is initialized [ 1.963523] usb 10-1: New USB device found, idVendor=046d, idProduct=c01e [ 1.963594] usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.963682] usb 10-1: Product: USB-PS/2 Optical Mouse [ 1.963743] usb 10-1: Manufacturer: Logitech [ 1.969570] hidraw: raw HID events driver (C) Jiri Kosina [ 1.985640] usbcore: registered new interface driver usbhid [ 1.985704] usbhid: USB HID core driver [ 1.988165] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb10/10-1/10-1:1.0/input/input1 [ 1.988385] hid-generic 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0 [ 2.093913] md: md127 stopped. [ 2.096877] md: bind [ 2.100551] md: bind [ 2.101002] md: bind [ 2.101755] md: bind [ 2.103937] md: bind [ 2.105230] md: raid10 personality registered for level 10 [ 2.105640] md/raid10:md127: active with 4 out of 4 devices [ 2.105963] created bitmap (466 pages) for device md127 [ 2.121928] md127: bitmap initialized from disk: read 30 pages, set 0 of 953616 bits [ 2.149858] md127: detected capacity change from 0 to 1999877701632 [ 2.149959] RAID10 conf printout: [ 2.149963] --- wd:4 rd:4 [ 2.149966] disk 0, wo:0, o:1, dev:sda3 [ 2.149977] disk 1, wo:0, o:1, dev:sdc3 [ 2.149979] disk 2, wo:0, o:1, dev:sdb3 [ 2.149981] disk 3, wo:0, o:1, dev:sdd3 [ 2.151501] md127: unknown partition table [ 2.187645] device-mapper: uevent: version 1.0.3 [ 2.187777] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org [ 2.203784] usb 10-2: new low-speed USB device number 3 using uhci_hcd [ 2.256305] bio: create slab at 1 [ 2.324492] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 2.509650] usb 10-2: New USB device found, idVendor=051d, idProduct=0002 [ 2.509718] usb 10-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.509797] usb 10-2: Product: Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 [ 2.509860] usb 10-2: Manufacturer: American Power Conversion [ 2.509922] usb 10-2: SerialNumber: JB0539032829 [ 2.740221] Switched to clocksource tsc [ 3.584325] hid-generic 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:1d.2-2/input0 [ 13.730195] systemd-udevd[634]: starting version 204 [ 14.230269] wmi: Mapper loaded [ 14.268895] ATK0110 ATK0110:00: Overriding interface detection [ 14.273171] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 14.273254] ACPI: Power Button [PWRB] [ 14.273340] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 14.273419] ACPI: Power Button [PWRF] [ 14.283478] EDAC MC: Ver: 3.0.0 [ 14.308356] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED) [ 14.308466] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED) [ 14.308556] EDAC i7core: Driver loaded, 1 memory controller(s) found. [ 14.312265] systemd-udevd[674]: renamed network interface eth0 to lan [ 14.331814] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251) [ 14.331979] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.332129] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251) [ 14.332290] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.332373] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251) [ 14.332533] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.332618] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 14.364866] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 14.367777] ACPI Warning: 0x0000000000001000-0x000000000000101f SystemIO conflicts with Region \SMRG 1 (20131115/utaddress-251) [ 14.367939] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.406498] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 14.411325] [drm] Initialized drm 1.1.0 20060810 [ 14.518041] iTCO_vendor_support: vendor-support=0 [ 14.525770] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 14.525857] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860) [ 14.525998] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 14.625084] snd_hda_intel 0000:00:1b.0: irq 93 for MSI/MSI-X [ 14.650248] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 14.650376] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 14.650493] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.650610] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.650726] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.650842] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 14.650957] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 14.651074] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 14.651524] hda_intel: Disabling MSI [ 14.651597] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client [ 14.709942] nouveau: unknown parameter 'perflvl_wr' ignored [ 14.710160] MXM: GUID detected in BIOS [ 14.727614] md: bind [ 14.783015] md: bind [ 14.789240] md: bind [ 14.794432] md: bind [ 14.832790] md: bind [ 14.849298] md: raid1 personality registered for level 1 [ 14.849563] md/raid1:md0: active with 5 out of 5 mirrors [ 14.853347] created bitmap (16 pages) for device md0 [ 14.864496] md0: bitmap initialized from disk: read 2 pages, set 0 of 32096 bits [ 14.877323] md0: detected capacity change from 0 to 131465216 [ 14.877458] RAID1 conf printout: [ 14.877462] --- wd:5 rd:5 [ 14.877465] disk 0, wo:0, o:1, dev:sda1 [ 14.877467] disk 1, wo:0, o:1, dev:sdc1 [ 14.877470] disk 2, wo:0, o:1, dev:sdb1 [ 14.877472] disk 3, wo:0, o:1, dev:sdd1 [ 14.877474] disk 4, wo:0, o:1, dev:sde1 [ 14.880346] md0: unknown partition table [ 15.468103] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16 [ 15.468394] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15 [ 15.468665] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14 [ 15.468937] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13 [ 15.471500] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0c1000a1 [ 15.471568] nouveau [ DEVICE][0000:03:00.0] Chipset: GF108 (NVC1) [ 15.471633] nouveau [ DEVICE][0000:03:00.0] Family : NVC0 [ 15.474291] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image... [ 15.540028] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid [ 15.540098] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN [ 15.540347] nouveau [ VBIOS][0000:03:00.0] BIT signature found [ 15.540413] nouveau [ VBIOS][0000:03:00.0] version 70.08.4d.00.00 [ 15.540890] nouveau 0000:03:00.0: irq 94 for MSI/MSI-X [ 15.540903] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled [ 15.541001] nouveau W[ PFB][0000:03:00.0][0x00000000][ffff88061bebc800] reclocking of this ram type unsupported [ 15.541118] nouveau [ PFB][0000:03:00.0] RAM type: DDR3 [ 15.541209] nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB [ 15.541301] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags [ 15.574190] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external [ 15.574286] nouveau [ PTHERM][0000:03:00.0] fan management: automatic [ 15.574379] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes [ 15.574493] nouveau [ CLK][0000:03:00.0] 03: core 50 MHz memory 135 MHz [ 15.574585] nouveau [ CLK][0000:03:00.0] 07: core 405 MHz memory 324 MHz [ 15.574694] nouveau [ CLK][0000:03:00.0] 0f: core 810 MHz memory 900 MHz [ 15.574943] nouveau [ CLK][0000:03:00.0] --: core 405 MHz memory 324 MHz [ 15.586865] [TTM] Zone kernel: Available graphics memory: 12368142 kiB [ 15.586961] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 15.587055] [TTM] Initializing pool allocator [ 15.587144] [TTM] Initializing DMA pool allocator [ 15.587236] nouveau [ DRM] VRAM: 512 MiB [ 15.587322] nouveau [ DRM] GART: 1048576 MiB [ 15.587411] nouveau [ DRM] TMDS table version 2.0 [ 15.587498] nouveau [ DRM] DCB version 4.0 [ 15.587585] nouveau [ DRM] DCB outp 00: 01000302 00020030 [ 15.587674] nouveau [ DRM] DCB outp 01: 02000300 00000000 [ 15.587763] nouveau [ DRM] DCB outp 02: 08011392 00020020 [ 15.587852] nouveau [ DRM] DCB outp 03: 04022310 00000000 [ 15.588002] nouveau [ DRM] DCB conn 00: 00001030 [ 15.588154] nouveau [ DRM] DCB conn 01: 00002161 [ 15.588303] nouveau [ DRM] DCB conn 02: 00000200 [ 15.589281] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 15.589372] [drm] No driver support for vblank timestamp query. [ 15.603932] nouveau [ DRM] MM: using COPY0 for buffer copies [ 15.688554] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88061d20f000 [ 15.688759] fbcon: nouveaufb (fb0) is primary device [ 15.767249] Console: switching to colour frame buffer device 128x48 [ 15.768248] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device [ 15.768260] nouveau 0000:03:00.0: registered panic notifier [ 15.768282] [drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0 [ 16.284853] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 16.689360] RAID10 conf printout: [ 16.689365] --- wd:4 rd:4 [ 16.689368] disk 0, wo:0, o:1, dev:sda3 [ 16.689371] disk 1, wo:0, o:1, dev:sdc3 [ 16.689373] disk 2, wo:0, o:1, dev:sdb3 [ 16.689375] disk 3, wo:0, o:1, dev:sdd3 [ 16.797872] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro [ 17.249405] loop: module loaded [ 18.977520] Adding 5857276k swap on /dev/mapper/Zia-swap_crypt. Priority:-1 extents:1 across:5857276k [ 20.193879] EXT4-fs (md0): mounting ext2 file system using the ext4 subsystem [ 20.249294] EXT4-fs (md0): mounted filesystem without journal. Opts: (null) [ 20.317238] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: user_xattr [ 20.354576] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr [ 20.447409] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 20.519785] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 20.541961] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 20.648313] FAT-fs (sdd2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 21.646283] Bridge firewalling registered [ 21.649395] device lan entered promiscuous mode [ 21.662557] r8169 0000:07:01.0 lan: link down [ 21.662578] r8169 0000:07:01.0 lan: link down [ 21.663016] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready [ 21.665403] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 24.344231] r8169 0000:07:01.0 lan: link up [ 24.344492] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready [ 24.345355] br0: port 1(lan) entered forwarding state [ 24.346969] br0: port 1(lan) entered forwarding state [ 24.348426] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 25.342865] RPC: Registered named UNIX socket transport module. [ 25.343045] RPC: Registered udp transport module. [ 25.343181] RPC: Registered tcp transport module. [ 25.343600] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 25.348079] FS-Cache: Loaded [ 25.369779] FS-Cache: Netfs 'nfs' registered for caching [ 25.421082] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org). [ 25.790688] tun: Universal TUN/TAP device driver, 1.6 [ 25.790907] tun: (C) 1999-2004 Max Krasnyansky [ 26.351334] br0: port 1(lan) entered forwarding state [ 38.117820] CacheFiles: Loaded [ 39.175686] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 39.183577] NFSD: starting 90-second grace period (net ffffffff81885e00) --------------080304010705010106040704 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline --------------080304010705010106040704--