From: Anthony DeRobertis <aderobertis-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
To: Neil Horman <nhorman-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
Subject: Re: PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1)
Date: Thu, 16 Jan 2014 15:07:21 -0500 [thread overview]
Message-ID: <52D83BF9.7040502@metrics.net> (raw)
In-Reply-To: <20140116182134.GC9984-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
On 01/16/2014 01:21 PM, Neil Horman wrote:
> Yes, What I would like to see is your backout patch removed, and the the
> following tests preformed:
>
> 1) VT-D off in bios
> 2) VT-D on in bios and nointremap specified on the command line
> 3) VT-D on in bios and nointremap _not_ specified on the command line
>
> If I could see the boot logs for all of those that would be helpful. What would
> be particularly helpful is to know if test (2) results in the problem
> reproducing. If it does that suggests our ability to disable interrupt
> remapping in the kernel is somehow ineffective on your system.
(2) results in the problem reproducing. To be clear, all three tests
have been done without my patch applied. They were built from:
master a6da83f Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
To get the dmesg for (1) and (3), I booted into single user, and didn't
go any further. (2) I first booted to single user, but then continued
on—that's why you'll see the much later timestamp loading tun, etc.
**** VT-d=OFF (1)
[ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-rc8+ (anthony@Zia) (gcc version 4.8.2 (Debian 4.8.2-12) ) #7 SMP Thu Jan 16 12:36:44 EST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro single verbose
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e2c00-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH X58, BIOS 1402 08/09/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask E00000000 write-back
[ 0.000000] 2 base 600000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE
[ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE
[ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63fe00000-0x63fffffff]
[ 0.000000] [mem 0x63fe00000-0x63fffffff] page 2M
[ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63c000000-0x63fdfffff]
[ 0.000000] [mem 0x63c000000-0x63fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x600000000-0x63bffffff]
[ 0.000000] [mem 0x600000000-0x63bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x5ffffffff]
[ 0.000000] [mem 0x100000000-0x5ffffffff] page 2M
[ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE
[ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x362b2000-0x37150fff]
[ 0.000000] ACPI: RSDP 00000000000fb940 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf780100 000064 (v01 080912 XSDT1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v03 080912 FACP1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 00C469 (v01 A1682 A1682001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 000040
[ 0.000000] ACPI: APIC 00000000bf780390 0000D8 (v01 080912 APIC1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 00003C (v01 080912 OEMMCFG 20120809 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 000072 (v01 080912 OEMB1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 000038 (v01 080912 OEMHPET 20120809 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000bf798360 000034 (v06 080912 PerfTune 20120809 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 080912 OEMOSFR 20120809 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79a820 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x63fffffff]
[ 0.000000] NODE_DATA [mem 0x63ffe6000-0x63ffeafff]
[ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880627600000-ffff88063c5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x63fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
[ 0.000000] node 0: [mem 0x100000000-0x63fffffff]
[ 0.000000] On node 0 totalpages: 6289181
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10667 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 75264 pages used for memmap
[ 0.000000] Normal zone: 5505024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7d9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7da000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88063fc00000 s85824 r8192 d20672 u131072
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6203173
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro single verbose
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 24718516K/25156724K available (4799K kernel code, 692K rwdata, 1592K rodata, 988K init, 952K bss, 438208K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[ 0.000000] NR_IRQS:33024 nr_irqs:1216 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 100663296 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.008000] tsc: PIT calibration matches HPET. 1 loops
[ 0.008000] tsc: Detected 2806.444 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5612.88 BogoMIPS (lpj=11225776)
[ 0.000124] pid_max: default: 32768 minimum: 301
[ 0.000217] Security Framework initialized
[ 0.000278] AppArmor: AppArmor disabled by boot time parameter
[ 0.000339] Yama: becoming mindful.
[ 0.002279] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.010485] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013870] Mount-cache hash table entries: 256
[ 0.014090] Initializing cgroup subsys memory
[ 0.014154] Initializing cgroup subsys devices
[ 0.014213] Initializing cgroup subsys freezer
[ 0.014273] Initializing cgroup subsys blkio
[ 0.014332] Initializing cgroup subsys perf_event
[ 0.014410] CPU: Physical Processor ID: 0
[ 0.014468] CPU: Processor Core ID: 0
[ 0.014529] mce: CPU supports 9 MCE banks
[ 0.014597] CPU0: Thermal monitoring enabled (TM1)
[ 0.014666] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.014666] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.014666] tlb_flushall_shift: 6
[ 0.014832] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000)
[ 0.015928] ACPI: Core revision 20131115
[ 0.019468] ACPI: All ACPI Tables successfully acquired
[ 0.065646] Switched APIC routing to physical flat.
[ 0.066214] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.105972] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
[ 0.211879] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.212111] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.212173] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.212238] ... version: 3
[ 0.212297] ... bit width: 48
[ 0.212355] ... generic registers: 4
[ 0.212413] ... value mask: 0000ffffffffffff
[ 0.212474] ... max period: 000000007fffffff
[ 0.212534] ... fixed-purpose events: 3
[ 0.212593] ... event mask: 000000070000000f
[ 0.213000] x86: Booting SMP configuration:
[ 0.227448] CPU1 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.229644] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.244025] CPU2 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.260581] CPU3 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.213060] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.322375] x86: Booted up 1 node, 8 CPUs
[ 0.322488] smpboot: Total of 8 processors activated (44903.10 BogoMIPS)
[ 0.327080] devtmpfs: initialized
[ 0.330516] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes)
[ 0.330743] NET: Registered protocol family 16
[ 0.330872] cpuidle: using governor ladder
[ 0.330931] cpuidle: using governor menu
[ 0.331008] ACPI: bus type PCI registered
[ 0.331067] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.331195] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.331276] PCI: not using MMCONFIG
[ 0.331334] PCI: Using configuration type 1 for base access
[ 0.333282] bio: create slab at 0
[ 0.333451] ACPI: Added _OSI(Module Device)
[ 0.333510] ACPI: Added _OSI(Processor Device)
[ 0.333569] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.333628] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.335304] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.371960] ACPI: SSDT 00000000bf7983a0 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.372415] ACPI: Dynamic OEM Table Load:
[ 0.372548] ACPI: SSDT (null) 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.372780] ACPI: SSDT 00000000bf79a1c0 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.373132] ACPI: Dynamic OEM Table Load:
[ 0.373264] ACPI: SSDT (null) 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.373590] ACPI: Interpreter enabled
[ 0.373654] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.373818] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.373876] ACPI: Using IOAPIC for interrupt routing
[ 0.373954] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.374894] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.388690] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.388882] ACPI: No dock devices found.
[ 0.394846] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.394912] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.394994] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.395343] PCI host bridge to bus 0000:00
[ 0.395403] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.395463] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.395525] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.395588] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.395651] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.395715] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.395778] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[ 0.395850] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.395892] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.395965] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.396009] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.396054] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.396140] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 0.396184] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.396228] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.396314] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.396358] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.396402] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.396490] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.396531] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.396575] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.396666] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.396757] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.396846] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.396933] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.397019] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.397056] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f]
[ 0.397138] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.397224] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.397261] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f]
[ 0.397343] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.397430] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.397466] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f]
[ 0.397547] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.397642] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.397660] pci 0000:00:1a.7: reg 0x10: [mem 0xf9dff000-0xf9dff3ff]
[ 0.397739] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.397786] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.397875] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.397888] pci 0000:00:1b.0: reg 0x10: [mem 0xf9df8000-0xf9dfbfff 64bit]
[ 0.397945] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.398012] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.398071] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.398119] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.398207] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.398266] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.398314] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.398402] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.398439] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f]
[ 0.398520] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.398608] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.398644] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f]
[ 0.398725] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.398812] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.398848] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f]
[ 0.398929] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.399024] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.399043] pci 0000:00:1d.7: reg 0x10: [mem 0xf9dfe000-0xf9dfe3ff]
[ 0.399121] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.399168] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.399254] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.399333] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.399420] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.399489] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.399580] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.399645] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.399815] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.399831] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07]
[ 0.399838] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883]
[ 0.399844] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807]
[ 0.399851] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483]
[ 0.399857] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f]
[ 0.399864] pci 0000:00:1f.2: reg 0x24: [mem 0xf9dfc000-0xf9dfc7ff]
[ 0.399903] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.399974] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.399987] pci 0000:00:1f.3: reg 0x10: [mem 0xf9dfd000-0xf9dfd0ff 64bit]
[ 0.400004] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f]
[ 0.400114] pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601
[ 0.400123] pci 0000:01:00.0: reg 0x10: [io 0xbc00-0xbc07]
[ 0.400130] pci 0000:01:00.0: reg 0x14: [io 0xb880-0xb883]
[ 0.400136] pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb807]
[ 0.400142] pci 0000:01:00.0: reg 0x1c: [io 0xb480-0xb483]
[ 0.400149] pci 0000:01:00.0: reg 0x20: [io 0xb400-0xb40f]
[ 0.400155] pci 0000:01:00.0: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
[ 0.400162] pci 0000:01:00.0: reg 0x30: [mem 0xf9ee0000-0xf9eeffff pref]
[ 0.400189] pci 0000:01:00.0: PME# supported from D3hot
[ 0.407954] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.408024] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.408026] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.408088] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.408103] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit]
[ 0.408175] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.415952] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.416020] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.416067] pci 0000:03:00.0: [10de:0de0] type 00 class 0x030000
[ 0.416076] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.416085] pci 0000:03:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.416094] pci 0000:03:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
[ 0.416100] pci 0000:03:00.0: reg 0x24: [io 0xcc00-0xcc7f]
[ 0.416106] pci 0000:03:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref]
[ 0.416173] pci 0000:03:00.1: [10de:0bea] type 00 class 0x040300
[ 0.416182] pci 0000:03:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff]
[ 0.423978] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.424046] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.424049] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.424053] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.424099] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.424206] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.424272] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.424351] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
[ 0.424380] pci 0000:05:00.0: reg 0x10: [io 0xdc00-0xdc07]
[ 0.424392] pci 0000:05:00.0: reg 0x14: [io 0xd880-0xd883]
[ 0.424405] pci 0000:05:00.0: reg 0x18: [io 0xd800-0xd807]
[ 0.424417] pci 0000:05:00.0: reg 0x1c: [io 0xd480-0xd483]
[ 0.424430] pci 0000:05:00.0: reg 0x20: [io 0xd400-0xd40f]
[ 0.424442] pci 0000:05:00.0: reg 0x24: [mem 0xfbdff000-0xfbdff1ff]
[ 0.424455] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.424505] pci 0000:05:00.0: PME# supported from D3hot
[ 0.431975] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.432043] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.432046] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.432087] pci 0000:07:01.0: [10ec:8167] type 00 class 0x020000
[ 0.432104] pci 0000:07:01.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.432113] pci 0000:07:01.0: reg 0x14: [mem 0xfbeff000-0xfbeff0ff]
[ 0.432148] pci 0000:07:01.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
[ 0.432180] pci 0000:07:01.0: supports D1 D2
[ 0.432182] pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.432219] pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010
[ 0.432234] pci 0000:07:02.0: reg 0x10: [mem 0xfbefe000-0xfbefe7ff]
[ 0.432243] pci 0000:07:02.0: reg 0x14: [io 0xec00-0xec7f]
[ 0.432304] pci 0000:07:02.0: supports D2
[ 0.432306] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
[ 0.432362] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.432427] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.432430] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.432435] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.432436] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.432438] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.432439] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.432441] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.432442] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.432875] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.433385] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.433892] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.434401] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.434908] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.435416] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.437769] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.438277] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.438832] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.438971] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.439016] Found 1 acpi root devices
[ 0.439092] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.439172] vgaarb: loaded
[ 0.439227] vgaarb: bridge control possible 0000:03:00.0
[ 0.439318] PCI: Using ACPI for IRQ routing
[ 0.444657] PCI: Discovered peer bus ff
[ 0.444715] PCI: root bus ff: using default resources
[ 0.444716] PCI: Probing PCI hardware (bus ff)
[ 0.444735] PCI host bridge to bus 0000:ff
[ 0.444796] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.444858] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.444921] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.445004] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.445038] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.445068] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.445096] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.445125] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.445153] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.445182] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.445210] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.445238] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.445266] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.445295] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.445324] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.445352] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.445383] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.445412] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.445441] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.445468] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.445496] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.445524] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.445561] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.445565] PCI: pci_cache_line_size set to 64 bytes
[ 0.445637] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.445638] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.445718] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.445784] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.446029] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.449293] Switched to clocksource hpet
[ 0.450619] pnp: PnP ACPI init
[ 0.450681] ACPI: bus type PNP registered
[ 0.450780] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 0.450844] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.450908] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.450971] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.451034] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 0.451097] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 0.451160] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.451189] pnp 00:01: [dma 4]
[ 0.451204] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.451229] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.451246] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.451267] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.451342] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.451405] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.451581] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.451645] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.451707] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 0.451770] system 00:06: [io 0x0600-0x0607] has been reserved
[ 0.451832] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.451896] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.451959] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.452030] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.452095] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.452141] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.454038] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.454107] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454225] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.454289] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.454353] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454509] pnp 00:0b: [dma 0 disabled]
[ 0.454557] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.454598] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.454657] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.454722] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454875] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.454939] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.455003] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.455067] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.455131] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.455195] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.455294] pnp: PnP ACPI: found 15 devices
[ 0.455352] ACPI: bus type PNP unregistered
[ 0.461286] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.461289] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000
[ 0.461300] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 05] add_size 200000
[ 0.461312] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.461377] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.461378] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.461380] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.461383] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[ 0.461447] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc06fffff pref]
[ 0.461526] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.461589] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.461650] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.461713] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.461780] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.461841] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.461908] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.461969] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.462032] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.462097] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.462177] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.462243] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.462303] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.462368] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 0.462432] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.462515] pci 0000:05:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref]
[ 0.462592] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.462653] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.462717] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.462781] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc06fffff pref]
[ 0.462862] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.462923] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.462987] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.463055] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.463057] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.463058] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.463060] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.463061] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.463063] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.463064] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.463066] pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff]
[ 0.463067] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.463069] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.463071] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbcfffff]
[ 0.463072] pci_bus 0000:03: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.463074] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.463075] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
[ 0.463077] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.463078] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.463080] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.463081] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc06fffff pref]
[ 0.463083] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 0.463084] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.463086] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.463087] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.463089] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.463090] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.463092] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.463093] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.463096] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.463097] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.463171] NET: Registered protocol family 2
[ 0.463488] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.464003] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.464181] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.464257] TCP: reno registered
[ 0.464339] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.464504] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.464721] NET: Registered protocol family 1
[ 0.466283] pci 0000:03:00.0: Boot video device
[ 0.466296] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.466340] Unpacking initramfs...
[ 0.740141] Freeing initrd memory: 14972K (ffff8800362b2000 - ffff880037151000)
[ 0.740222] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.740286] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
[ 0.740597] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19
[ 0.740663] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19
[ 0.740728] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19
[ 0.740794] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19
[ 0.740859] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19
[ 0.740925] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19
[ 0.740990] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19
[ 0.741054] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19
[ 0.741152] microcode: Microcode Update Driver: v2.00, Peter Oruba
[ 0.741534] audit: initializing netlink socket (disabled)
[ 0.741601] type=2000 audit(1389901199.596:1): initialized
[ 0.756261] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.757090] VFS: Disk quotas dquot_6.5.2
[ 0.757175] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.757306] msgmni has been set to 32768
[ 0.758625] alg: No test for stdrng (krng)
[ 0.758703] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.758819] io scheduler noop registered
[ 0.758877] io scheduler deadline registered
[ 0.758957] io scheduler cfq registered (default)
[ 0.759186] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.759369] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[ 0.759511] pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X
[ 0.759573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.759644] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.759727] intel_idle: MWAIT substates: 0x1120
[ 0.759737] intel_idle: v0.4 model 0x1A
[ 0.759738] intel_idle: lapic_timer_reliable_states 0x2
[ 0.759895] GHES: HEST is not enabled!
[ 0.759992] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.782094] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.782514] Linux agpgart interface v0.103
[ 0.782667] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.782730] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.783288] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.783422] mousedev: PS/2 mouse device common for all mice
[ 0.783512] rtc_cmos 00:02: RTC can wake from S4
[ 0.783673] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.783757] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.783842] AMD IOMMUv2 driver by Joerg Roedel
[ 0.785646] AMD IOMMUv2 functionality not available on this system
[ 0.785791] TCP: cubic registered
[ 0.787327] NET: Registered protocol family 10
[ 0.788065] mip6: Mobile IPv6
[ 0.788122] NET: Registered protocol family 17
[ 0.788182] mpls_gso: MPLS GSO support
[ 0.788553] registered taskstats version 1
[ 0.789904] rtc_cmos 00:02: setting system clock to 2014-01-16 19:40:00 UTC (1389901200)
[ 0.790000] PM: Hibernation image not present or could not be loaded.
[ 0.790974] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000)
[ 0.791053] Write protecting the kernel read-only data: 8192k
[ 0.794298] Freeing unused kernel memory: 1332K (ffff8800014b3000 - ffff880001600000)
[ 0.795572] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
[ 0.807675] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.857845] systemd-udevd[95]: starting version 204
[ 0.874192] ACPI: bus type USB registered
[ 0.874277] usbcore: registered new interface driver usbfs
[ 0.874349] usbcore: registered new interface driver hub
[ 0.874975] SCSI subsystem initialized
[ 0.875218] usbcore: registered new device driver usb
[ 0.875999] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.876068] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 0.876281] libata version 3.00 loaded.
[ 0.876284] xhci_hcd 0000:02:00.0: irq 66 for MSI/MSI-X
[ 0.876291] xhci_hcd 0000:02:00.0: irq 67 for MSI/MSI-X
[ 0.876298] xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
[ 0.876304] xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
[ 0.876308] xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
[ 0.876313] xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
[ 0.876317] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
[ 0.876321] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
[ 0.876421] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.876485] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.876565] usb usb1: Product: xHCI Host Controller
[ 0.876630] usb usb1: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.876696] usb usb1: SerialNumber: 0000:02:00.0
[ 0.876863] hub 1-0:1.0: USB hub found
[ 0.876935] hub 1-0:1.0: 2 ports detected
[ 0.877112] ahci 0000:00:1f.2: version 3.0
[ 0.877151] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.877218] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.877268] ahci 0000:00:1f.2: irq 74 for MSI/MSI-X
[ 0.877331] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.877415] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 0.879590] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.879825] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.879892] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.879975] usb usb2: Product: xHCI Host Controller
[ 0.880039] usb usb2: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.880105] usb usb2: SerialNumber: 0000:02:00.0
[ 0.880179] ehci-pci: EHCI PCI platform driver
[ 0.880180] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.880270] hub 2-0:1.0: USB hub found
[ 0.880277] hub 2-0:1.0: 2 ports detected
[ 0.883123] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.883270] r8169 0000:07:01.0 (unregistered net_device): not PCI Express
[ 0.885421] r8169 0000:07:01.0 eth0: RTL8169sc/8110sc at 0xffffc9000307e000, 54:04:a6:49:30:b0, XID 18000000 IRQ 19
[ 0.885534] r8169 0000:07:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 0.918863] scsi0 : ahci
[ 0.919220] scsi1 : ahci
[ 0.919432] scsi2 : ahci
[ 0.919597] scsi3 : ahci
[ 0.919756] scsi4 : ahci
[ 0.919908] scsi5 : ahci
[ 0.919990] ata1: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc100 irq 74
[ 0.920069] ata2: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc180 irq 74
[ 0.920147] ata3: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc200 irq 74
[ 0.920225] ata4: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc280 irq 74
[ 0.920303] ata5: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc300 irq 74
[ 0.920381] ata6: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc380 irq 74
[ 0.920547] ahci 0000:01:00.0: irq 75 for MSI/MSI-X
[ 0.920561] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
[ 0.920620] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.920624] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.920661] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 0.920713] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.920715] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.920716] usb usb3: Product: UHCI Host Controller
[ 0.920717] usb usb3: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.920718] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.920845] hub 3-0:1.0: USB hub found
[ 0.920850] hub 3-0:1.0: 2 ports detected
[ 0.921056] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.921060] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.921095] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 0.921144] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.921146] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.921147] usb usb4: Product: UHCI Host Controller
[ 0.921148] usb usb4: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.921148] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.921244] hub 4-0:1.0: USB hub found
[ 0.921248] hub 4-0:1.0: 2 ports detected
[ 0.921453] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.921458] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.921496] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
[ 0.921546] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.921547] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.921548] usb usb5: Product: UHCI Host Controller
[ 0.921549] usb usb5: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.921550] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.921644] hub 5-0:1.0: USB hub found
[ 0.921650] hub 5-0:1.0: 2 ports detected
[ 0.921840] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.921845] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.921880] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 0.921930] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.921932] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.921933] usb usb6: Product: UHCI Host Controller
[ 0.921935] usb usb6: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.921936] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.922018] hub 6-0:1.0: USB hub found
[ 0.922023] hub 6-0:1.0: 2 ports detected
[ 0.922221] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.922225] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.922252] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 0.922297] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.922299] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.922300] usb usb7: Product: UHCI Host Controller
[ 0.922301] usb usb7: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.922302] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.922389] hub 7-0:1.0: USB hub found
[ 0.922395] hub 7-0:1.0: 2 ports detected
[ 0.922577] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.922581] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.922605] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 0.922652] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.922654] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.922655] usb usb8: Product: UHCI Host Controller
[ 0.922656] usb usb8: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.922657] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.922745] hub 8-0:1.0: USB hub found
[ 0.922750] hub 8-0:1.0: 2 ports detected
[ 0.923125] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.923129] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 9
[ 0.923140] ehci-pci 0000:00:1a.7: debug port 1
[ 0.927035] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.927044] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff000
[ 0.937486] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.937515] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 0.937517] ahci 0000:01:00.0: flags: 64bit ncq fbs pio
[ 0.937713] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.937776] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.937854] usb usb9: Product: EHCI Host Controller
[ 0.937914] usb usb9: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 0.937976] usb usb9: SerialNumber: 0000:00:1a.7
[ 0.938180] hub 9-0:1.0: USB hub found
[ 0.938208] scsi6 : ahci
[ 0.938299] hub 9-0:1.0: 6 ports detected
[ 0.938349] scsi7 : ahci
[ 0.938473] scsi8 : ahci
[ 0.938629] scsi9 : ahci
[ 0.938815] scsi10 : ahci
[ 0.938964] scsi11 : ahci
[ 0.939120] scsi12 : ahci
[ 0.939277] scsi13 : ahci
[ 0.939361] ata7: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 75
[ 0.939439] ata8: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 75
[ 0.939517] ata9: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 75
[ 0.939596] ata10: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 75
[ 0.939674] ata11: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 75
[ 0.939753] ata12: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 75
[ 0.939831] ata13: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff400 irq 75
[ 0.939909] ata14: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff480 irq 75
[ 0.940100] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.940182] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.940472] scsi14 : ahci
[ 0.940586] scsi15 : ahci
[ 0.940674] ata15: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff100 irq 16
[ 0.940754] ata16: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff180 irq 16
[ 0.957676] firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 0.961649] hub 3-0:1.0: USB hub found
[ 0.961719] hub 3-0:1.0: 2 ports detected
[ 0.985590] hub 4-0:1.0: USB hub found
[ 0.985660] hub 4-0:1.0: 2 ports detected
[ 1.009642] hub 5-0:1.0: USB hub found
[ 1.009708] hub 5-0:1.0: 2 ports detected
[ 1.010104] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.010168] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 10
[ 1.010258] ehci-pci 0000:00:1d.7: debug port 1
[ 1.014216] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.014222] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dfe000
[ 1.025591] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.025687] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.025751] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.025829] usb usb10: Product: EHCI Host Controller
[ 1.025889] usb usb10: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 1.025950] usb usb10: SerialNumber: 0000:00:1d.7
[ 1.026309] hub 10-0:1.0: USB hub found
[ 1.026377] hub 10-0:1.0: 6 ports detected
[ 1.051054] hub 6-0:1.0: USB hub found
[ 1.051120] hub 6-0:1.0: 2 ports detected
[ 1.073673] hub 7-0:1.0: USB hub found
[ 1.073743] hub 7-0:1.0: 2 ports detected
[ 1.097672] hub 8-0:1.0: USB hub found
[ 1.097745] hub 8-0:1.0: 2 ports detected
[ 1.257759] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.257788] ata15: SATA link down (SStatus 0 SControl 300)
[ 1.257904] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.257980] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.258056] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.258070] ata16: SATA link down (SStatus 0 SControl 300)
[ 1.258193] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.258269] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.258344] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.258533] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.258827] ata14.00: configured for UDMA/66
[ 1.266639] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.409816] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.409900] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.409975] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.410050] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.410124] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.410198] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.411015] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.411093] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.411360] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.411427] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.411500] ata6.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.411576] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.411647] ata5.00: ATA-8: ST31000340AS, SD15, max UDMA/133
[ 1.411710] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.411784] ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.411847] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.412562] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33
[ 1.412631] ata2.00: applying bridge limits
[ 1.412847] ata1.00: configured for UDMA/133
[ 1.412922] ata4.00: configured for UDMA/133
[ 1.413127] ata6.00: configured for UDMA/133
[ 1.413207] ata3.00: configured for UDMA/133
[ 1.413256] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.413773] ata5.00: configured for UDMA/133
[ 1.415948] ata2.00: configured for UDMA/33
[ 1.417930] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
[ 1.418198] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.418453] scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.418690] scsi 4:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
[ 1.418954] scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.419344] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.419371] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.419414] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.419416] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.419435] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.419596] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.419617] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.419621] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.419674] sd 5:0:0:0: [sde] Write Protect is off
[ 1.419676] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.419711] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.419712] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.419714] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.419722] sd 4:0:0:0: [sdd] Write Protect is off
[ 1.419724] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.419740] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.419786] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.420390] sd 0:0:0:0: [sda] Write Protect is off
[ 1.420453] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.420480] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.420490] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 1.421132] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.421228] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.421318] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.421410] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.421501] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 1.421589] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 1.421688] scsi 13:0:0:0: Attached scsi generic sg6 type 3
[ 1.425550] sda: sda1 sda2 sda3
[ 1.425885] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.425951] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.426024] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.426174] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.434266] sde: sde1 sde2 sde3
[ 1.435114] sd 5:0:0:0: [sde] Attached SCSI disk
[ 1.435477] sdd: sdd1 sdd2 sdd3
[ 1.435558] sdb: sdb1 sdb2 sdb3
[ 1.435946] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 1.435985] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.449048] sdc: sdc1 sdc2 sdc3
[ 1.449800] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.457782] firewire_core 0000:07:02.0: created device fw0: GUID 001fc600001acd8c, S400
[ 1.723574] random: nonblocking pool is initialized
[ 1.737725] tsc: Refined TSC clocksource calibration: 2806.363 MHz
[ 1.782713] md: md127 stopped.
[ 1.785412] md: bind
[ 1.785653] md: bind
[ 1.786465] md: bind
[ 1.792633] md: bind
[ 1.792886] md: bind
[ 1.794330] md: raid10 personality registered for level 10
[ 1.794987] md/raid10:md127: active with 4 out of 4 devices
[ 1.795221] created bitmap (466 pages) for device md127
[ 1.808717] md127: bitmap initialized from disk: read 30 pages, set 0 of 953616 bits
[ 1.833843] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[ 1.839039] md127: detected capacity change from 0 to 1999877701632
[ 1.839176] RAID10 conf printout:
[ 1.839177] --- wd:4 rd:4
[ 1.839178] disk 0, wo:0, o:1, dev:sda3
[ 1.839180] disk 1, wo:0, o:1, dev:sdc3
[ 1.839182] disk 2, wo:0, o:1, dev:sdb3
[ 1.839183] disk 3, wo:0, o:1, dev:sdd3
[ 1.840591] md127: unknown partition table
[ 1.876071] device-mapper: uevent: version 1.0.3
[ 1.876194] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[ 1.923759] bio: create slab at 1
[ 1.998427] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
[ 1.998493] EXT4-fs (dm-0): write access will be enabled during recovery
[ 2.010915] usb 8-1: New USB device found, idVendor=046d, idProduct=c01e
[ 2.010979] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.011043] usb 8-1: Product: USB-PS/2 Optical Mouse
[ 2.011103] usb 8-1: Manufacturer: Logitech
[ 2.017732] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.034182] usbcore: registered new interface driver usbhid
[ 2.034246] usbhid: USB HID core driver
[ 2.036312] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
[ 2.036682] hid-generic 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 2.182901] RAID10 conf printout:
[ 2.182906] --- wd:4 rd:4
[ 2.182909] disk 0, wo:0, o:1, dev:sda3
[ 2.182912] disk 1, wo:0, o:1, dev:sdc3
[ 2.182914] disk 2, wo:0, o:1, dev:sdb3
[ 2.182916] disk 3, wo:0, o:1, dev:sdd3
[ 2.253955] usb 8-2: new low-speed USB device number 3 using uhci_hcd
[ 2.564146] usb 8-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.564212] usb 8-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.564276] usb 8-2: Product: Back-UPS RS 1500 FW:8.g9 .D USB FW:g9
[ 2.564338] usb 8-2: Manufacturer: American Power Conversion
[ 2.564399] usb 8-2: SerialNumber: JB0539032829
[ 2.738444] Switched to clocksource tsc
[ 2.826648] EXT4-fs (dm-0): recovery complete
[ 2.832962] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 3.638785] hid-generic 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:1d.2-2/input0
[ 16.436731] systemd-udevd[601]: starting version 204
[ 17.122658] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 17.122835] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.122919] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 17.123078] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.123160] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 17.123319] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.123400] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 17.135153] ACPI Warning: 0x0000000000001000-0x000000000000101f SystemIO conflicts with Region \SMRG 1 (20131115/utaddress-251)
[ 17.135316] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.140636] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 17.140720] ACPI: Power Button [PWRB]
[ 17.140811] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 17.140889] ACPI: Power Button [PWRF]
[ 17.146076] EDAC MC: Ver: 3.0.0
[ 17.161008] wmi: Mapper loaded
[ 17.161416] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 17.161542] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 17.161635] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 17.187751] ATK0110 ATK0110:00: Overriding interface detection
[ 17.208448] [drm] Initialized drm 1.1.0 20060810
[ 17.258795] systemd-udevd[641]: renamed network interface eth0 to lan
[ 17.348444] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 17.390538] md: bind
[ 17.454823] md: bind
[ 17.457909] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 17.471002] md: bind
[ 17.481909] iTCO_vendor_support: vendor-support=0
[ 17.494984] md: bind
[ 17.506609] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 17.506701] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 17.506934] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 17.521259] md: bind
[ 17.546721] nouveau: unknown parameter 'perflvl_wr' ignored
[ 17.546976] MXM: GUID detected in BIOS
[ 17.547289] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0c1000a1
[ 17.547352] nouveau [ DEVICE][0000:03:00.0] Chipset: GF108 (NVC1)
[ 17.547414] nouveau [ DEVICE][0000:03:00.0] Family : NVC0
[ 17.548355] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
[ 17.613840] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
[ 17.613904] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
[ 17.614062] nouveau [ VBIOS][0000:03:00.0] BIT signature found
[ 17.614124] nouveau [ VBIOS][0000:03:00.0] version 70.08.4d.00.00
[ 17.614478] nouveau 0000:03:00.0: irq 76 for MSI/MSI-X
[ 17.614486] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
[ 17.614599] nouveau W[ PFB][0000:03:00.0][0x00000000][ffff88061e563800] reclocking of this ram type unsupported
[ 17.614723] nouveau [ PFB][0000:03:00.0] RAM type: DDR3
[ 17.614813] nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB
[ 17.614905] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
[ 17.626916] md: raid1 personality registered for level 1
[ 17.627251] md/raid1:md0: active with 5 out of 5 mirrors
[ 17.635869] created bitmap (16 pages) for device md0
[ 17.644661] md0: bitmap initialized from disk: read 2 pages, set 0 of 32096 bits
[ 17.646103] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
[ 17.646214] nouveau [ PTHERM][0000:03:00.0] fan management: automatic
[ 17.646307] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
[ 17.646423] nouveau [ CLK][0000:03:00.0] 03: core 50 MHz memory 135 MHz
[ 17.646516] nouveau [ CLK][0000:03:00.0] 07: core 405 MHz memory 324 MHz
[ 17.646624] nouveau [ CLK][0000:03:00.0] 0f: core 810 MHz memory 900 MHz
[ 17.646883] nouveau [ CLK][0000:03:00.0] --: core 405 MHz memory 324 MHz
[ 17.656891] [TTM] Zone kernel: Available graphics memory: 12368142 kiB
[ 17.656984] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 17.657075] [TTM] Initializing pool allocator
[ 17.657165] [TTM] Initializing DMA pool allocator
[ 17.657259] nouveau [ DRM] VRAM: 512 MiB
[ 17.657346] nouveau [ DRM] GART: 1048576 MiB
[ 17.657435] nouveau [ DRM] TMDS table version 2.0
[ 17.657523] nouveau [ DRM] DCB version 4.0
[ 17.657611] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 17.657700] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 17.657789] nouveau [ DRM] DCB outp 02: 08011392 00020020
[ 17.657878] nouveau [ DRM] DCB outp 03: 04022310 00000000
[ 17.657968] nouveau [ DRM] DCB conn 00: 00001030
[ 17.658129] nouveau [ DRM] DCB conn 01: 00002161
[ 17.658281] nouveau [ DRM] DCB conn 02: 00000200
[ 17.659044] md0: detected capacity change from 0 to 131465216
[ 17.659181] RAID1 conf printout:
[ 17.659184] --- wd:5 rd:5
[ 17.659186] disk 0, wo:0, o:1, dev:sda1
[ 17.659188] disk 1, wo:0, o:1, dev:sdc1
[ 17.659190] disk 2, wo:0, o:1, dev:sdb1
[ 17.659192] disk 3, wo:0, o:1, dev:sdd1
[ 17.659194] disk 4, wo:0, o:1, dev:sde1
[ 17.659321] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 17.659412] [drm] No driver support for vblank timestamp query.
[ 17.660722] md0: unknown partition table
[ 17.672199] snd_hda_intel 0000:00:1b.0: irq 77 for MSI/MSI-X
[ 17.674214] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 17.706907] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 17.707078] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 17.707232] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 17.707383] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 17.707629] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 17.707847] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 17.708059] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 17.708274] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 17.760922] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88061c846400
[ 17.761352] fbcon: nouveaufb (fb0) is primary device
[ 17.839459] Console: switching to colour frame buffer device 128x48
[ 17.840460] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
[ 17.840472] nouveau 0000:03:00.0: registered panic notifier
[ 17.840487] [drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
[ 17.840578] hda_intel: Disabling MSI
[ 17.840600] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
[ 18.659216] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
[ 18.659450] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
[ 18.659655] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14
[ 18.659873] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13
[ 19.290563] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 19.750641] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro
[ 20.131119] loop: module loaded
[ 21.421068] Adding 5857276k swap on /dev/mapper/Zia-swap_crypt. Priority:-1 extents:1 across:5857276k
[ 23.426672] EXT4-fs (md0): mounting ext2 file system using the ext4 subsystem
[ 23.477651] EXT4-fs (md0): mounted filesystem without journal. Opts: (null)
[ 23.532841] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 23.549520] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr
[ 23.617604] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 23.652195] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 23.667139] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 23.673819] FAT-fs (sdc2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 23.724106] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 23.735226] FAT-fs (sdb2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 23.797771] FAT-fs (sdd2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 23.809288] FAT-fs (sdd2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 24.796457] Bridge firewalling registered
[ 24.801378] device lan entered promiscuous mode
[ 24.813799] r8169 0000:07:01.0 lan: link down
[ 24.813827] r8169 0000:07:01.0 lan: link down
[ 24.816340] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
[ 24.819397] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 27.837495] r8169 0000:07:01.0 lan: link up
[ 27.837767] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
[ 27.838706] br0: port 1(lan) entered forwarding state
[ 27.840323] br0: port 1(lan) entered forwarding state
[ 27.841969] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 28.805597] RPC: Registered named UNIX socket transport module.
[ 28.805823] RPC: Registered udp transport module.
[ 28.806081] RPC: Registered tcp transport module.
[ 28.806552] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 28.815636] FS-Cache: Loaded
[ 28.830140] FS-Cache: Netfs 'nfs' registered for caching
[ 28.886841] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
[ 29.842611] br0: port 1(lan) entered forwarding state
**** VT-d=ON (3)
[ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-rc8+ (anthony@Zia) (gcc version 4.8.2 (Debian 4.8.2-12) ) #7 SMP Thu Jan 16 12:36:44 EST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro single verbose
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e2c00-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH X58, BIOS 1402 08/09/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask E00000000 write-back
[ 0.000000] 2 base 600000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE
[ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE
[ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63fe00000-0x63fffffff]
[ 0.000000] [mem 0x63fe00000-0x63fffffff] page 2M
[ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63c000000-0x63fdfffff]
[ 0.000000] [mem 0x63c000000-0x63fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x600000000-0x63bffffff]
[ 0.000000] [mem 0x600000000-0x63bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x5ffffffff]
[ 0.000000] [mem 0x100000000-0x5ffffffff] page 2M
[ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE
[ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x362b2000-0x37150fff]
[ 0.000000] ACPI: RSDP 00000000000fb940 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf780100 00006C (v01 080912 XSDT1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v03 080912 FACP1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 00C469 (v01 A1682 A1682001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 000040
[ 0.000000] ACPI: APIC 00000000bf780390 0000D8 (v01 080912 APIC1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 00003C (v01 080912 OEMMCFG 20120809 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 000072 (v01 080912 OEMB1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 000038 (v01 080912 OEMHPET 20120809 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf7980c0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000bf7984b0 000034 (v06 080912 PerfTune 20120809 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 080912 OEMOSFR 20120809 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79a970 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x63fffffff]
[ 0.000000] NODE_DATA [mem 0x63ffe6000-0x63ffeafff]
[ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880627600000-ffff88063c5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x63fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
[ 0.000000] node 0: [mem 0x100000000-0x63fffffff]
[ 0.000000] On node 0 totalpages: 6289181
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10667 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 75264 pages used for memmap
[ 0.000000] Normal zone: 5505024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7d9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7da000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88063fc00000 s85824 r8192 d20672 u131072
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6203173
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro single verbose
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 24718516K/25156724K available (4799K kernel code, 692K rwdata, 1592K rodata, 988K init, 952K bss, 438208K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[ 0.000000] NR_IRQS:33024 nr_irqs:1216 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 100663296 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.008000] tsc: PIT calibration matches HPET. 1 loops
[ 0.008000] tsc: Detected 2806.421 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5612.84 BogoMIPS (lpj=11225684)
[ 0.000124] pid_max: default: 32768 minimum: 301
[ 0.000216] Security Framework initialized
[ 0.000276] AppArmor: AppArmor disabled by boot time parameter
[ 0.000338] Yama: becoming mindful.
[ 0.002286] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.010492] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013884] Mount-cache hash table entries: 256
[ 0.014106] Initializing cgroup subsys memory
[ 0.014170] Initializing cgroup subsys devices
[ 0.014229] Initializing cgroup subsys freezer
[ 0.014289] Initializing cgroup subsys blkio
[ 0.014348] Initializing cgroup subsys perf_event
[ 0.014427] CPU: Physical Processor ID: 0
[ 0.014485] CPU: Processor Core ID: 0
[ 0.014546] mce: CPU supports 9 MCE banks
[ 0.014615] CPU0: Thermal monitoring enabled (TM1)
[ 0.014683] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.014683] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.014683] tlb_flushall_shift: 6
[ 0.014848] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000)
[ 0.015935] ACPI: Core revision 20131115
[ 0.019433] ACPI: All ACPI Tables successfully acquired
[ 0.065638] dmar: Host address width 39
[ 0.065699] dmar: DRHD base: 0x000000fbfff000 flags: 0x0
[ 0.065766] dmar: IOMMU 0: reg_base_addr fbfff000 ver 1:0 cap c9008010e60262 ecap f0207a
[ 0.065846] dmar: DRHD base: 0x000000fbffe000 flags: 0x1
[ 0.065911] dmar: IOMMU 1: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020fe
[ 0.065990] dmar: RMRR base: 0x000000000ec000 end: 0x000000000effff
[ 0.066053] dmar: RMRR base: 0x000000bf7ea000 end: 0x000000bf7fffff
[ 0.066115] dmar: ATSR flags: 0x0
[ 0.066268] This system BIOS has enabled interrupt remapping
[ 0.066268] on a chipset that contains an erratum making that
[ 0.066268] feature unstable. To maintain system stability
[ 0.066268] interrupt remapping is being disabled. Please
[ 0.066268] contact your BIOS vendor for an update
[ 0.066483] Switched APIC routing to physical flat.
[ 0.067047] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.109736] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
[ 0.216477] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.216711] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.216772] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.216838] ... version: 3
[ 0.216896] ... bit width: 48
[ 0.216954] ... generic registers: 4
[ 0.217013] ... value mask: 0000ffffffffffff
[ 0.217073] ... max period: 000000007fffffff
[ 0.217134] ... fixed-purpose events: 3
[ 0.217192] ... event mask: 000000070000000f
[ 0.217597] x86: Booting SMP configuration:
[ 0.231397] CPU1 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.233588] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.247954] CPU2 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.265504] CPU3 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.217657] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.329621] x86: Booted up 1 node, 8 CPUs
[ 0.329733] smpboot: Total of 8 processors activated (44902.73 BogoMIPS)
[ 0.334335] devtmpfs: initialized
[ 0.337892] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes)
[ 0.338118] NET: Registered protocol family 16
[ 0.338247] cpuidle: using governor ladder
[ 0.338305] cpuidle: using governor menu
[ 0.338382] ACPI: bus type PCI registered
[ 0.338440] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.338568] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.338649] PCI: not using MMCONFIG
[ 0.338706] PCI: Using configuration type 1 for base access
[ 0.339488] bio: create slab at 0
[ 0.339656] ACPI: Added _OSI(Module Device)
[ 0.339715] ACPI: Added _OSI(Processor Device)
[ 0.339774] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.339833] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.343827] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.376569] ACPI: SSDT 00000000bf7984f0 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.377025] ACPI: Dynamic OEM Table Load:
[ 0.377157] ACPI: SSDT (null) 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.377389] ACPI: SSDT 00000000bf79a310 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.377742] ACPI: Dynamic OEM Table Load:
[ 0.377874] ACPI: SSDT (null) 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.378199] ACPI: Interpreter enabled
[ 0.378263] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.378427] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.378485] ACPI: Using IOAPIC for interrupt routing
[ 0.378563] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.379504] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.393443] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.393635] ACPI: No dock devices found.
[ 0.399594] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.399660] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.399741] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.400091] PCI host bridge to bus 0000:00
[ 0.400151] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.400212] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.400274] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.400336] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.400400] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.400462] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.400528] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[ 0.400599] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.400642] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.400710] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.400755] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.400800] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.400886] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 0.400930] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.400974] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.401060] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.401104] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.401148] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.401236] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.401277] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.401322] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.401413] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.401503] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.401592] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.401679] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.401765] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.401801] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f]
[ 0.401883] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.401970] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.402006] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f]
[ 0.402088] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.402174] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.402211] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f]
[ 0.402292] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.402385] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.402404] pci 0000:00:1a.7: reg 0x10: [mem 0xf9dff000-0xf9dff3ff]
[ 0.402482] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.402529] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.402618] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.402631] pci 0000:00:1b.0: reg 0x10: [mem 0xf9df8000-0xf9dfbfff 64bit]
[ 0.402688] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.402754] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.402813] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.402860] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.402949] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.403008] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.403054] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.403142] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.403178] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f]
[ 0.403261] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.403347] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.403384] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f]
[ 0.403464] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.403551] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.403587] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f]
[ 0.403668] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.403763] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.403782] pci 0000:00:1d.7: reg 0x10: [mem 0xf9dfe000-0xf9dfe3ff]
[ 0.403860] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.403907] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.403991] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.404071] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.404158] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.404227] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.404318] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.404383] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.404555] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.404572] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07]
[ 0.404578] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883]
[ 0.404585] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807]
[ 0.404591] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483]
[ 0.404598] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f]
[ 0.404604] pci 0000:00:1f.2: reg 0x24: [mem 0xf9dfc000-0xf9dfc7ff]
[ 0.404643] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.404711] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.404724] pci 0000:00:1f.3: reg 0x10: [mem 0xf9dfd000-0xf9dfd0ff 64bit]
[ 0.404741] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f]
[ 0.404851] pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601
[ 0.404861] pci 0000:01:00.0: reg 0x10: [io 0xbc00-0xbc07]
[ 0.404867] pci 0000:01:00.0: reg 0x14: [io 0xb880-0xb883]
[ 0.404874] pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb807]
[ 0.404880] pci 0000:01:00.0: reg 0x1c: [io 0xb480-0xb483]
[ 0.404886] pci 0000:01:00.0: reg 0x20: [io 0xb400-0xb40f]
[ 0.404893] pci 0000:01:00.0: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
[ 0.404899] pci 0000:01:00.0: reg 0x30: [mem 0xf9ee0000-0xf9eeffff pref]
[ 0.404927] pci 0000:01:00.0: PME# supported from D3hot
[ 0.412553] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.412622] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.412625] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.412687] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.412702] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit]
[ 0.412774] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.420551] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.420617] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.420667] pci 0000:03:00.0: [10de:0de0] type 00 class 0x030000
[ 0.420676] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.420685] pci 0000:03:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.420694] pci 0000:03:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
[ 0.420700] pci 0000:03:00.0: reg 0x24: [io 0xcc00-0xcc7f]
[ 0.420706] pci 0000:03:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref]
[ 0.420774] pci 0000:03:00.1: [10de:0bea] type 00 class 0x040300
[ 0.420782] pci 0000:03:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff]
[ 0.428572] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.428641] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.428644] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.428648] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.428694] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.428801] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.428867] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.428946] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
[ 0.428975] pci 0000:05:00.0: reg 0x10: [io 0xdc00-0xdc07]
[ 0.428987] pci 0000:05:00.0: reg 0x14: [io 0xd880-0xd883]
[ 0.429000] pci 0000:05:00.0: reg 0x18: [io 0xd800-0xd807]
[ 0.429012] pci 0000:05:00.0: reg 0x1c: [io 0xd480-0xd483]
[ 0.429025] pci 0000:05:00.0: reg 0x20: [io 0xd400-0xd40f]
[ 0.429037] pci 0000:05:00.0: reg 0x24: [mem 0xfbdff000-0xfbdff1ff]
[ 0.429050] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.429100] pci 0000:05:00.0: PME# supported from D3hot
[ 0.436570] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.436637] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.436640] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.436682] pci 0000:07:01.0: [10ec:8167] type 00 class 0x020000
[ 0.436699] pci 0000:07:01.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.436707] pci 0000:07:01.0: reg 0x14: [mem 0xfbeff000-0xfbeff0ff]
[ 0.436743] pci 0000:07:01.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
[ 0.436774] pci 0000:07:01.0: supports D1 D2
[ 0.436776] pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.436812] pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010
[ 0.436828] pci 0000:07:02.0: reg 0x10: [mem 0xfbefe000-0xfbefe7ff]
[ 0.436837] pci 0000:07:02.0: reg 0x14: [io 0xec00-0xec7f]
[ 0.436898] pci 0000:07:02.0: supports D2
[ 0.436899] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
[ 0.436956] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.437021] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.437024] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.437029] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.437031] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.437032] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.437034] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.437035] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.437037] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.437470] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.437978] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.438485] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.438991] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.439500] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.441842] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.442350] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.442857] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.443410] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.443549] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.443593] Found 1 acpi root devices
[ 0.443669] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.443749] vgaarb: loaded
[ 0.443805] vgaarb: bridge control possible 0000:03:00.0
[ 0.443895] PCI: Using ACPI for IRQ routing
[ 0.449202] PCI: Discovered peer bus ff
[ 0.449260] PCI: root bus ff: using default resources
[ 0.449261] PCI: Probing PCI hardware (bus ff)
[ 0.449280] PCI host bridge to bus 0000:ff
[ 0.449339] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.449401] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.449464] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.449547] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.449581] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.449611] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.449640] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.449669] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.449697] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.449725] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.449754] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.449782] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.449810] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.449839] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.449868] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.449896] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.449927] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.449955] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.449984] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.450012] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.450040] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.450068] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.450104] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.450108] PCI: pci_cache_line_size set to 64 bytes
[ 0.450180] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.450181] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.450261] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.450327] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.450571] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.453831] Switched to clocksource hpet
[ 0.455153] pnp: PnP ACPI init
[ 0.455216] ACPI: bus type PNP registered
[ 0.455315] system 00:00: [mem 0xfbf00000-0xfbffffff] could not be reserved
[ 0.455380] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.455443] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.455506] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.455569] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 0.455633] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 0.455696] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.455725] pnp 00:01: [dma 4]
[ 0.455739] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.455764] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.455781] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.455802] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.455877] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.455941] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.457978] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.458045] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.458107] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 0.458170] system 00:06: [io 0x0600-0x0607] has been reserved
[ 0.458233] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.458297] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.458360] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.458424] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.458503] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.458551] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.458607] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.458671] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.458753] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.458818] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.458881] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.459036] pnp 00:0b: [dma 0 disabled]
[ 0.459084] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.459125] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.459184] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.459248] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.459399] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.459464] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.459528] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.459591] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.459655] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.459719] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.459816] pnp: PnP ACPI: found 15 devices
[ 0.459875] ACPI: bus type PNP unregistered
[ 0.465807] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.465810] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000
[ 0.465817] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 05] add_size 200000
[ 0.465829] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.465898] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.465900] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.465902] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.465904] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[ 0.465968] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc06fffff pref]
[ 0.466047] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.466110] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.466171] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.466235] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.466301] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.466363] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.466430] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.466490] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.466553] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.466618] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.466698] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.466763] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.466824] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.466888] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 0.466953] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.467035] pci 0000:05:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref]
[ 0.467113] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.467173] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.467237] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.467301] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc06fffff pref]
[ 0.467382] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.467443] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.467507] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.467575] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.467576] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.467578] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.467579] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.467581] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.467582] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.467584] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.467585] pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff]
[ 0.467587] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.467588] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.467590] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbcfffff]
[ 0.467591] pci_bus 0000:03: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.467593] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.467594] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
[ 0.467596] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.467598] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.467599] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.467600] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc06fffff pref]
[ 0.467602] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 0.467603] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.467605] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.467606] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.467608] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.467609] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.467611] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.467612] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.467615] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.467616] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.467691] NET: Registered protocol family 2
[ 0.468009] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.468524] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.468702] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.468778] TCP: reno registered
[ 0.468861] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.469025] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.469241] NET: Registered protocol family 1
[ 0.470801] pci 0000:03:00.0: Boot video device
[ 0.470814] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.470859] Unpacking initramfs...
[ 0.744728] Freeing initrd memory: 14972K (ffff8800362b2000 - ffff880037151000)
[ 0.744817] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.744879] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
[ 0.746248] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746313] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746379] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746445] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746510] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746576] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746640] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746705] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19
[ 0.746801] microcode: Microcode Update Driver: v2.00, Peter Oruba
[ 0.747163] audit: initializing netlink socket (disabled)
[ 0.747230] type=2000 audit(1389900967.604:1): initialized
[ 0.761880] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.762712] VFS: Disk quotas dquot_6.5.2
[ 0.762797] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.762926] msgmni has been set to 32768
[ 0.763212] alg: No test for stdrng (krng)
[ 0.763292] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.763405] io scheduler noop registered
[ 0.763463] io scheduler deadline registered
[ 0.763541] io scheduler cfq registered (default)
[ 0.763770] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.763951] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[ 0.764092] pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X
[ 0.764155] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.764225] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.764307] intel_idle: MWAIT substates: 0x1120
[ 0.764316] intel_idle: v0.4 model 0x1A
[ 0.764317] intel_idle: lapic_timer_reliable_states 0x2
[ 0.764475] GHES: HEST is not enabled!
[ 0.764574] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.785995] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.786382] Linux agpgart interface v0.103
[ 0.786535] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.786597] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.787155] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.787286] mousedev: PS/2 mouse device common for all mice
[ 0.787376] rtc_cmos 00:02: RTC can wake from S4
[ 0.787535] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.787619] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.787704] AMD IOMMUv2 driver by Joerg Roedel
[ 0.787766] AMD IOMMUv2 functionality not available on this system
[ 0.789650] TCP: cubic registered
[ 0.791236] NET: Registered protocol family 10
[ 0.791992] mip6: Mobile IPv6
[ 0.792049] NET: Registered protocol family 17
[ 0.792109] mpls_gso: MPLS GSO support
[ 0.792466] registered taskstats version 1
[ 0.793732] rtc_cmos 00:02: setting system clock to 2014-01-16 19:36:08 UTC (1389900968)
[ 0.793829] PM: Hibernation image not present or could not be loaded.
[ 0.794832] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000)
[ 0.794910] Write protecting the kernel read-only data: 8192k
[ 0.798119] Freeing unused kernel memory: 1332K (ffff8800014b3000 - ffff880001600000)
[ 0.799470] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
[ 0.811544] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.861561] systemd-udevd[95]: starting version 204
[ 0.876900] ACPI: bus type USB registered
[ 0.876988] usbcore: registered new interface driver usbfs
[ 0.877062] usbcore: registered new interface driver hub
[ 0.877655] usbcore: registered new device driver usb
[ 0.878338] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.878408] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 0.878620] xhci_hcd 0000:02:00.0: irq 66 for MSI/MSI-X
[ 0.878628] xhci_hcd 0000:02:00.0: irq 67 for MSI/MSI-X
[ 0.878635] xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
[ 0.878643] xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
[ 0.878649] xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
[ 0.878656] xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
[ 0.878662] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
[ 0.878669] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
[ 0.878885] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.878953] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.879036] usb usb1: Product: xHCI Host Controller
[ 0.879099] usb usb1: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.879166] usb usb1: SerialNumber: 0000:02:00.0
[ 0.879237] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.879558] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.879764] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.879858] hub 1-0:1.0: USB hub found
[ 0.879928] hub 1-0:1.0: 2 ports detected
[ 0.880080] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.880147] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.880907] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.881019] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 0.881126] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.881190] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.881270] usb usb3: Product: UHCI Host Controller
[ 0.881331] usb usb3: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.881393] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.881476] ehci-pci: EHCI PCI platform driver
[ 0.881550] hub 3-0:1.0: USB hub found
[ 0.881616] hub 3-0:1.0: 2 ports detected
[ 0.881738] SCSI subsystem initialized
[ 0.881887] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.881952] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.882077] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 0.882086] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.882088] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.882089] usb usb2: Product: xHCI Host Controller
[ 0.882090] usb usb2: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.882091] usb usb2: SerialNumber: 0000:02:00.0
[ 0.882199] hub 2-0:1.0: USB hub found
[ 0.882207] hub 2-0:1.0: 2 ports detected
[ 0.882684] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.882752] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.882834] usb usb4: Product: UHCI Host Controller
[ 0.882898] usb usb4: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.882964] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.883283] hub 4-0:1.0: USB hub found
[ 0.883352] hub 4-0:1.0: 2 ports detected
[ 0.883623] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.883691] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.883802] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
[ 0.883914] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.883982] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.884019] libata version 3.00 loaded.
[ 0.884065] usb usb5: Product: UHCI Host Controller
[ 0.884129] usb usb5: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.884194] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.884347] hub 5-0:1.0: USB hub found
[ 0.884415] hub 5-0:1.0: 2 ports detected
[ 0.884678] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.884746] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.884858] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 0.884967] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.885035] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.885117] usb usb6: Product: UHCI Host Controller
[ 0.885180] usb usb6: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.885244] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.885393] hub 6-0:1.0: USB hub found
[ 0.885460] hub 6-0:1.0: 2 ports detected
[ 0.885722] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.885788] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.885893] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 0.886013] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.886080] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.886161] usb usb7: Product: UHCI Host Controller
[ 0.886223] usb usb7: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.886287] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.886439] hub 7-0:1.0: USB hub found
[ 0.886505] hub 7-0:1.0: 2 ports detected
[ 0.886767] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.886834] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.886944] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 0.887038] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.887101] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.887179] usb usb8: Product: UHCI Host Controller
[ 0.887240] usb usb8: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.889046] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.889230] hub 8-0:1.0: USB hub found
[ 0.889297] hub 8-0:1.0: 2 ports detected
[ 0.889824] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.889893] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 9
[ 0.889995] ehci-pci 0000:00:1a.7: debug port 1
[ 0.892853] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.892990] r8169 0000:07:01.0 (unregistered net_device): not PCI Express
[ 0.893298] r8169 0000:07:01.0 eth0: RTL8169sc/8110sc at 0xffffc9000304c000, 54:04:a6:49:30:b0, XID 18000000 IRQ 19
[ 0.893383] r8169 0000:07:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 0.893957] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.893965] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff000
[ 0.906027] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.906118] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.906183] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.906264] usb usb9: Product: EHCI Host Controller
[ 0.906326] usb usb9: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 0.907404] usb usb9: SerialNumber: 0000:00:1a.7
[ 0.907599] hub 9-0:1.0: USB hub found
[ 0.907665] hub 9-0:1.0: 6 ports detected
[ 0.930118] hub 3-0:1.0: USB hub found
[ 0.930186] hub 3-0:1.0: 2 ports detected
[ 0.955448] hub 4-0:1.0: USB hub found
[ 0.955512] hub 4-0:1.0: 2 ports detected
[ 0.966142] firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 0.978217] hub 5-0:1.0: USB hub found
[ 0.978286] hub 5-0:1.0: 2 ports detected
[ 0.978731] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.978796] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 10
[ 0.978885] ehci-pci 0000:00:1d.7: debug port 1
[ 0.982846] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.982851] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dfe000
[ 0.994076] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.994193] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.994257] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.994335] usb usb10: Product: EHCI Host Controller
[ 0.994395] usb usb10: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 0.994456] usb usb10: SerialNumber: 0000:00:1d.7
[ 0.994773] hub 10-0:1.0: USB hub found
[ 0.994841] hub 10-0:1.0: 6 ports detected
[ 1.018177] hub 6-0:1.0: USB hub found
[ 1.018248] hub 6-0:1.0: 2 ports detected
[ 1.042161] hub 7-0:1.0: USB hub found
[ 1.042231] hub 7-0:1.0: 2 ports detected
[ 1.066287] hub 8-0:1.0: USB hub found
[ 1.066351] hub 8-0:1.0: 2 ports detected
[ 1.066538] ahci 0000:00:1f.2: version 3.0
[ 1.066697] ahci 0000:00:1f.2: irq 74 for MSI/MSI-X
[ 1.066763] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.066845] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 1.106777] scsi0 : ahci
[ 1.107563] scsi1 : ahci
[ 1.107890] scsi2 : ahci
[ 1.108201] scsi3 : ahci
[ 1.108491] scsi4 : ahci
[ 1.108735] scsi5 : ahci
[ 1.108847] ata1: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc100 irq 74
[ 1.108930] ata2: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc180 irq 74
[ 1.109008] ata3: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc200 irq 74
[ 1.109086] ata4: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc280 irq 74
[ 1.109164] ata5: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc300 irq 74
[ 1.109243] ata6: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc380 irq 74
[ 1.109391] ahci 0000:01:00.0: irq 75 for MSI/MSI-X
[ 1.109403] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
[ 1.122131] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 1.122218] ahci 0000:01:00.0: flags: 64bit ncq fbs pio
[ 1.122985] scsi6 : ahci
[ 1.123267] scsi7 : ahci
[ 1.123529] scsi8 : ahci
[ 1.123803] scsi9 : ahci
[ 1.124006] scsi10 : ahci
[ 1.124219] scsi11 : ahci
[ 1.124431] scsi12 : ahci
[ 1.124647] scsi13 : ahci
[ 1.124754] ata7: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 75
[ 1.124834] ata8: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 75
[ 1.124912] ata9: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 75
[ 1.124990] ata10: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 75
[ 1.125068] ata11: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 75
[ 1.125147] ata12: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 75
[ 1.125224] ata13: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff400 irq 75
[ 1.125302] ata14: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff480 irq 75
[ 1.125490] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.125571] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.125830] scsi14 : ahci
[ 1.126012] scsi15 : ahci
[ 1.126143] ata15: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff100 irq 16
[ 1.126226] ata16: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff180 irq 16
[ 1.438307] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.442314] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.442398] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.442474] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.446352] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.446383] ata15: SATA link down (SStatus 0 SControl 300)
[ 1.446422] ata16: SATA link down (SStatus 0 SControl 300)
[ 1.446559] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.446636] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.446825] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.447117] ata14.00: configured for UDMA/66
[ 1.450360] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.466465] firewire_core 0000:07:02.0: created device fw0: GUID 001fc600001acd8c, S400
[ 1.594452] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.595627] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.595694] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.597075] ata4.00: configured for UDMA/133
[ 1.598303] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.598382] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.598461] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.599583] ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.599650] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.599720] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.599782] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.602226] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.602311] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.602382] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33
[ 1.602474] ata2.00: applying bridge limits
[ 1.602539] ata3.00: configured for UDMA/133
[ 1.602607] ata1.00: configured for UDMA/133
[ 1.602965] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.603468] ata6.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.603539] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.603849] ata5.00: ATA-8: ST31000340AS, SD15, max UDMA/133
[ 1.603913] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.604868] ata6.00: configured for UDMA/133
[ 1.605602] ata2.00: configured for UDMA/33
[ 1.605844] ata5.00: configured for UDMA/133
[ 1.607687] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
[ 1.608132] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.608538] scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.609060] scsi 4:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
[ 1.609439] scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.610174] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 1.616220] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.616332] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.616446] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.616560] scsi 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.616673] scsi 4:0:0:0: Attached scsi generic sg4 type 0
[ 1.616781] scsi 5:0:0:0: Attached scsi generic sg5 type 0
[ 1.616901] scsi 13:0:0:0: Attached scsi generic sg6 type 3
[ 1.618823] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.618965] sd 0:0:0:0: [sda] Write Protect is off
[ 1.619026] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.619061] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.621436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.621516] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.621649] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.621760] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.621786] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.621829] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.621854] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.621875] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.621877] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.621894] sd 4:0:0:0: [sdd] Write Protect is off
[ 1.621896] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.621900] sd 5:0:0:0: [sde] Write Protect is off
[ 1.621902] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.621908] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.621920] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.621922] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.622590] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.622651] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.622673] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.623811] sdc: sdc1 sdc2 sdc3
[ 1.624194] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.625441] sda: sda1 sda2 sda3
[ 1.627161] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.637058] sdb: sdb1 sdb2 sdb3
[ 1.637822] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.637925] sdd: sdd1 sdd2 sdd3
[ 1.638454] sde: sde1 sde2 sde3
[ 1.638573] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 1.638931] sd 5:0:0:0: [sde] Attached SCSI disk
[ 1.746302] tsc: Refined TSC clocksource calibration: 2806.363 MHz
[ 1.802305] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[ 1.898833] random: nonblocking pool is initialized
[ 1.978588] usb 8-1: New USB device found, idVendor=046d, idProduct=c01e
[ 1.978658] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.978726] usb 8-1: Product: USB-PS/2 Optical Mouse
[ 1.978785] usb 8-1: Manufacturer: Logitech
[ 1.985316] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.001690] usbcore: registered new interface driver usbhid
[ 2.001753] usbhid: USB HID core driver
[ 2.003384] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
[ 2.003551] hid-generic 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 2.039117] md: md127 stopped.
[ 2.046723] md: bind
[ 2.046988] md: bind
[ 2.047418] md: bind
[ 2.047645] md: bind
[ 2.047889] md: bind
[ 2.050849] md: raid10 personality registered for level 10
[ 2.051265] md/raid10:md127: active with 4 out of 4 devices
[ 2.051469] created bitmap (466 pages) for device md127
[ 2.064483] md127: bitmap initialized from disk: read 30 pages, set 0 of 953616 bits
[ 2.095159] md127: detected capacity change from 0 to 1999877701632
[ 2.095267] RAID10 conf printout:
[ 2.095268] --- wd:4 rd:4
[ 2.095270] disk 0, wo:0, o:1, dev:sda3
[ 2.095271] disk 1, wo:0, o:1, dev:sdc3
[ 2.095273] disk 2, wo:0, o:1, dev:sdb3
[ 2.095276] disk 3, wo:0, o:1, dev:sdd3
[ 2.096861] md127: unknown partition table
[ 2.134608] device-mapper: uevent: version 1.0.3
[ 2.134738] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[ 2.176145] bio: create slab at 1
[ 2.218604] usb 8-2: new low-speed USB device number 3 using uhci_hcd
[ 2.267969] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.526755] usb 8-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.526825] usb 8-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.526892] usb 8-2: Product: Back-UPS RS 1500 FW:8.g9 .D USB FW:g9
[ 2.526954] usb 8-2: Manufacturer: American Power Conversion
[ 2.527015] usb 8-2: SerialNumber: JB0539032829
[ 2.746992] Switched to clocksource tsc
[ 3.597312] hid-generic 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:1d.2-2/input0
[ 13.741963] systemd-udevd[626]: starting version 204
[ 14.299462] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 14.299639] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.299723] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 14.299881] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.299964] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 14.300123] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.300205] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 14.407460] EDAC MC: Ver: 3.0.0
[ 14.429438] ACPI Warning: 0x0000000000001000-0x000000000000101f SystemIO conflicts with Region \SMRG 1 (20131115/utaddress-251)
[ 14.429602] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.448825] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 14.448936] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 14.449026] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 14.490131] [drm] Initialized drm 1.1.0 20060810
[ 14.502643] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 14.502727] ACPI: Power Button [PWRB]
[ 14.502817] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 14.502896] ACPI: Power Button [PWRF]
[ 14.522247] wmi: Mapper loaded
[ 14.542412] systemd-udevd[683]: renamed network interface eth0 to lan
[ 14.552317] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 14.563209] ATK0110 ATK0110:00: Overriding interface detection
[ 14.595486] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 14.635604] md: bind
[ 14.694890] md: bind
[ 14.725937] md: bind
[ 14.758685] md: bind
[ 14.774799] nouveau: unknown parameter 'perflvl_wr' ignored
[ 14.775139] MXM: GUID detected in BIOS
[ 14.775498] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0c1000a1
[ 14.775562] nouveau [ DEVICE][0000:03:00.0] Chipset: GF108 (NVC1)
[ 14.775624] nouveau [ DEVICE][0000:03:00.0] Family : NVC0
[ 14.776552] iTCO_vendor_support: vendor-support=0
[ 14.776594] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
[ 14.790387] md: bind
[ 14.793534] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 14.793619] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 14.793757] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 14.841699] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
[ 14.841764] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
[ 14.841922] nouveau [ VBIOS][0000:03:00.0] BIT signature found
[ 14.841984] nouveau [ VBIOS][0000:03:00.0] version 70.08.4d.00.00
[ 14.842288] nouveau 0000:03:00.0: irq 76 for MSI/MSI-X
[ 14.842295] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
[ 14.842489] nouveau W[ PFB][0000:03:00.0][0x00000000][ffff88061eff7000] reclocking of this ram type unsupported
[ 14.842606] nouveau [ PFB][0000:03:00.0] RAM type: DDR3
[ 14.842694] nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB
[ 14.842783] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
[ 14.873936] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
[ 14.874033] nouveau [ PTHERM][0000:03:00.0] fan management: automatic
[ 14.874126] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
[ 14.874240] nouveau [ CLK][0000:03:00.0] 03: core 50 MHz memory 135 MHz
[ 14.874332] nouveau [ CLK][0000:03:00.0] 07: core 405 MHz memory 324 MHz
[ 14.874450] nouveau [ CLK][0000:03:00.0] 0f: core 810 MHz memory 900 MHz
[ 14.874699] nouveau [ CLK][0000:03:00.0] --: core 405 MHz memory 324 MHz
[ 14.879935] md: raid1 personality registered for level 1
[ 14.880230] md/raid1:md0: active with 5 out of 5 mirrors
[ 14.880573] created bitmap (16 pages) for device md0
[ 14.881371] md0: bitmap initialized from disk: read 2 pages, set 0 of 32096 bits
[ 14.882919] [TTM] Zone kernel: Available graphics memory: 12368142 kiB
[ 14.883011] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 14.883100] [TTM] Initializing pool allocator
[ 14.883188] [TTM] Initializing DMA pool allocator
[ 14.883281] nouveau [ DRM] VRAM: 512 MiB
[ 14.883367] nouveau [ DRM] GART: 1048576 MiB
[ 14.883455] nouveau [ DRM] TMDS table version 2.0
[ 14.883543] nouveau [ DRM] DCB version 4.0
[ 14.883630] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 14.883719] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 14.883807] nouveau [ DRM] DCB outp 02: 08011392 00020020
[ 14.883896] nouveau [ DRM] DCB outp 03: 04022310 00000000
[ 14.883985] nouveau [ DRM] DCB conn 00: 00001030
[ 14.884134] nouveau [ DRM] DCB conn 01: 00002161
[ 14.884283] nouveau [ DRM] DCB conn 02: 00000200
[ 14.887065] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.887158] [drm] No driver support for vblank timestamp query.
[ 14.900084] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 14.902739] md0: detected capacity change from 0 to 131465216
[ 14.902846] RAID1 conf printout:
[ 14.902849] --- wd:5 rd:5
[ 14.902851] disk 0, wo:0, o:1, dev:sda1
[ 14.902852] disk 1, wo:0, o:1, dev:sdc1
[ 14.902854] disk 2, wo:0, o:1, dev:sdb1
[ 14.902856] disk 3, wo:0, o:1, dev:sdd1
[ 14.902857] disk 4, wo:0, o:1, dev:sde1
[ 14.904780] md0: unknown partition table
[ 14.928803] snd_hda_intel 0000:00:1b.0: irq 77 for MSI/MSI-X
[ 14.959707] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.959907] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.960109] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.960308] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 14.960508] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 14.960689] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.962628] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 14.962807] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 14.990343] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88003703b000
[ 14.990658] fbcon: nouveaufb (fb0) is primary device
[ 15.066348] Console: switching to colour frame buffer device 128x48
[ 15.068737] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
[ 15.068745] nouveau 0000:03:00.0: registered panic notifier
[ 15.068768] [drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
[ 15.068973] hda_intel: Disabling MSI
[ 15.068993] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
[ 15.878936] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
[ 15.879171] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
[ 15.879383] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14
[ 15.881428] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13
[ 16.469425] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 16.834273] RAID10 conf printout:
[ 16.834281] --- wd:4 rd:4
[ 16.834284] disk 0, wo:0, o:1, dev:sda3
[ 16.834287] disk 1, wo:0, o:1, dev:sdc3
[ 16.834289] disk 2, wo:0, o:1, dev:sdb3
[ 16.834291] disk 3, wo:0, o:1, dev:sdd3
[ 16.965953] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro
[ 17.478143] loop: module loaded
[ 18.780774] Adding 5857276k swap on /dev/mapper/Zia-swap_crypt. Priority:-1 extents:1 across:5857276k
[ 19.769993] EXT4-fs (md0): mounting ext2 file system using the ext4 subsystem
[ 19.898051] EXT4-fs (md0): mounted filesystem without journal. Opts: (null)
[ 19.964800] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 19.972941] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr
[ 20.047164] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.091017] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.129998] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 20.169096] FAT-fs (sdd2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 21.175365] Bridge firewalling registered
[ 21.178143] device lan entered promiscuous mode
[ 21.189135] r8169 0000:07:01.0 lan: link down
[ 21.189150] r8169 0000:07:01.0 lan: link down
[ 21.189582] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
[ 21.191974] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 24.037322] r8169 0000:07:01.0 lan: link up
[ 24.037580] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
[ 24.038513] br0: port 1(lan) entered forwarding state
[ 24.041839] br0: port 1(lan) entered forwarding state
[ 24.043288] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 25.226276] RPC: Registered named UNIX socket transport module.
[ 25.226508] RPC: Registered udp transport module.
[ 25.226729] RPC: Registered tcp transport module.
[ 25.227109] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 25.236203] FS-Cache: Loaded
[ 25.253009] FS-Cache: Netfs 'nfs' registered for caching
[ 25.281657] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
[ 26.047541] br0: port 1(lan) entered forwarding state
**** VT-d=ON, nointremap (2)
[ 0.000000] CPU0 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-rc8+ (anthony@Zia) (gcc version 4.8.2 (Debian 4.8.2-12) ) #7 SMP Thu Jan 16 12:36:44 EST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro single verbose nointremap
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e2c00-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7d9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf7da000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/SABERTOOTH X58, BIOS 1402 08/09/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask E00000000 write-back
[ 0.000000] 2 base 600000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE
[ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE
[ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63fe00000-0x63fffffff]
[ 0.000000] [mem 0x63fe00000-0x63fffffff] page 2M
[ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x63c000000-0x63fdfffff]
[ 0.000000] [mem 0x63c000000-0x63fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x600000000-0x63bffffff]
[ 0.000000] [mem 0x600000000-0x63bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf77ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf77ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x5ffffffff]
[ 0.000000] [mem 0x100000000-0x5ffffffff] page 2M
[ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE
[ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x362b2000-0x37150fff]
[ 0.000000] ACPI: RSDP 00000000000fb940 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf780100 00006C (v01 080912 XSDT1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780290 0000F4 (v03 080912 FACP1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 00C469 (v01 A1682 A1682001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 000040
[ 0.000000] ACPI: APIC 00000000bf780390 0000D8 (v01 080912 APIC1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 00003C (v01 080912 OEMMCFG 20120809 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 000072 (v01 080912 OEMB1157 20120809 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 000038 (v01 080912 OEMHPET 20120809 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf7980c0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: ASPT 00000000bf7984b0 000034 (v06 080912 PerfTune 20120809 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 0000B0 (v01 080912 OEMOSFR 20120809 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79a970 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x63fffffff]
[ 0.000000] NODE_DATA [mem 0x63ffe6000-0x63ffeafff]
[ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880627600000-ffff88063c5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x63fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf77ffff]
[ 0.000000] node 0: [mem 0x100000000-0x63fffffff]
[ 0.000000] On node 0 totalpages: 6289181
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10667 pages used for memmap
[ 0.000000] DMA32 zone: 780160 pages, LIFO batch:31
[ 0.000000] Normal zone: 75264 pages used for memmap
[ 0.000000] Normal zone: 5505024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e3000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf798000-0xbf7d9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7da000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88063fc00000 s85824 r8192 d20672 u131072
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6203173
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc8+ root=/dev/mapper/Zia-root ro single verbose nointremap
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 24718516K/25156724K available (4799K kernel code, 692K rwdata, 1592K rodata, 988K init, 952K bss, 438208K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[ 0.000000] NR_IRQS:33024 nr_irqs:1216 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 100663296 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.004000] tsc: PIT calibration matches HPET. 1 loops
[ 0.004000] tsc: Detected 2806.439 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5612.87 BogoMIPS (lpj=11225756)
[ 0.000122] pid_max: default: 32768 minimum: 301
[ 0.000214] Security Framework initialized
[ 0.000274] AppArmor: AppArmor disabled by boot time parameter
[ 0.000334] Yama: becoming mindful.
[ 0.002275] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.010481] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013876] Mount-cache hash table entries: 256
[ 0.014097] Initializing cgroup subsys memory
[ 0.014160] Initializing cgroup subsys devices
[ 0.014218] Initializing cgroup subsys freezer
[ 0.014277] Initializing cgroup subsys blkio
[ 0.014336] Initializing cgroup subsys perf_event
[ 0.014413] CPU: Physical Processor ID: 0
[ 0.014470] CPU: Processor Core ID: 0
[ 0.014530] mce: CPU supports 9 MCE banks
[ 0.014598] CPU0: Thermal monitoring enabled (TM1)
[ 0.014666] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.014666] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.014666] tlb_flushall_shift: 6
[ 0.014828] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000)
[ 0.015927] ACPI: Core revision 20131115
[ 0.019466] ACPI: All ACPI Tables successfully acquired
[ 0.065675] dmar: Host address width 39
[ 0.065736] dmar: DRHD base: 0x000000fbfff000 flags: 0x0
[ 0.065801] dmar: IOMMU 0: reg_base_addr fbfff000 ver 1:0 cap c9008010e60262 ecap f0207a
[ 0.065880] dmar: DRHD base: 0x000000fbffe000 flags: 0x1
[ 0.065944] dmar: IOMMU 1: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020fe
[ 0.066022] dmar: RMRR base: 0x000000000ec000 end: 0x000000000effff
[ 0.066084] dmar: RMRR base: 0x000000bf7ea000 end: 0x000000bf7fffff
[ 0.066145] dmar: ATSR flags: 0x0
[ 0.066358] Switched APIC routing to physical flat.
[ 0.066922] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.108291] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
[ 0.215847] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.216079] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.216140] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.216204] ... version: 3
[ 0.216261] ... bit width: 48
[ 0.216318] ... generic registers: 4
[ 0.216376] ... value mask: 0000ffffffffffff
[ 0.216436] ... max period: 000000007fffffff
[ 0.216495] ... fixed-purpose events: 3
[ 0.216552] ... event mask: 000000070000000f
[ 0.216959] x86: Booting SMP configuration:
[ 0.231268] CPU1 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.233459] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.247832] CPU2 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.260653] CPU3 microcode updated early to revision 0x19, date = 2013-06-21
[ 0.217018] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.323852] x86: Booted up 1 node, 8 CPUs
[ 0.323965] smpboot: Total of 8 processors activated (44903.02 BogoMIPS)
[ 0.331504] devtmpfs: initialized
[ 0.334938] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7d9fff] (270336 bytes)
[ 0.335161] NET: Registered protocol family 16
[ 0.335291] cpuidle: using governor ladder
[ 0.335349] cpuidle: using governor menu
[ 0.335428] ACPI: bus type PCI registered
[ 0.335486] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.335612] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.335692] PCI: not using MMCONFIG
[ 0.335748] PCI: Using configuration type 1 for base access
[ 0.336533] bio: create slab at 0
[ 0.336700] ACPI: Added _OSI(Module Device)
[ 0.336758] ACPI: Added _OSI(Processor Device)
[ 0.336815] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.336874] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.338547] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.375923] ACPI: SSDT 00000000bf7984f0 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.376366] ACPI: Dynamic OEM Table Load:
[ 0.376498] ACPI: SSDT (null) 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.376723] ACPI: SSDT 00000000bf79a310 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.377074] ACPI: Dynamic OEM Table Load:
[ 0.377205] ACPI: SSDT (null) 000659 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.377525] ACPI: Interpreter enabled
[ 0.377589] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.377752] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.377809] ACPI: Using IOAPIC for interrupt routing
[ 0.377885] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.378821] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.392756] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.392945] ACPI: No dock devices found.
[ 0.400793] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.400859] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.400939] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.401291] PCI host bridge to bus 0000:00
[ 0.401349] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.401410] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.401471] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.401532] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.401594] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.401656] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.401719] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[ 0.401789] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.401831] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.401900] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.401944] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.401989] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.402074] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[ 0.402118] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.402162] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.402247] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.402291] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.402335] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.402422] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.402463] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.402508] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.402598] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.402688] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.402777] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.402863] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.402949] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.402986] pci 0000:00:1a.0: reg 0x20: [io 0xa800-0xa81f]
[ 0.403068] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.403153] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.403190] pci 0000:00:1a.1: reg 0x20: [io 0xa880-0xa89f]
[ 0.403272] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.403357] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.403394] pci 0000:00:1a.2: reg 0x20: [io 0xac00-0xac1f]
[ 0.403476] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.403570] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.403588] pci 0000:00:1a.7: reg 0x10: [mem 0xf9dff000-0xf9dff3ff]
[ 0.403667] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.403714] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.403802] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.403815] pci 0000:00:1b.0: reg 0x10: [mem 0xf9df8000-0xf9dfbfff 64bit]
[ 0.403873] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.403943] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.404002] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.404049] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.404136] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.404195] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.404241] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.404328] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.404365] pci 0000:00:1d.0: reg 0x20: [io 0xa080-0xa09f]
[ 0.404447] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.404532] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.404568] pci 0000:00:1d.1: reg 0x20: [io 0xa400-0xa41f]
[ 0.404650] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.404737] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.404773] pci 0000:00:1d.2: reg 0x20: [io 0xa480-0xa49f]
[ 0.404854] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.404948] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.404967] pci 0000:00:1d.7: reg 0x10: [mem 0xf9dfe000-0xf9dfe3ff]
[ 0.405046] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.405092] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.405177] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.405256] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.405343] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.405412] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.405501] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.405565] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.405733] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.405749] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07]
[ 0.405755] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883]
[ 0.405762] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807]
[ 0.405768] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483]
[ 0.405775] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x941f]
[ 0.405781] pci 0000:00:1f.2: reg 0x24: [mem 0xf9dfc000-0xf9dfc7ff]
[ 0.405821] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.405888] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.405901] pci 0000:00:1f.3: reg 0x10: [mem 0xf9dfd000-0xf9dfd0ff 64bit]
[ 0.405918] pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f]
[ 0.406028] pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601
[ 0.406038] pci 0000:01:00.0: reg 0x10: [io 0xbc00-0xbc07]
[ 0.406044] pci 0000:01:00.0: reg 0x14: [io 0xb880-0xb883]
[ 0.406050] pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb807]
[ 0.406057] pci 0000:01:00.0: reg 0x1c: [io 0xb480-0xb483]
[ 0.406063] pci 0000:01:00.0: reg 0x20: [io 0xb400-0xb40f]
[ 0.406070] pci 0000:01:00.0: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
[ 0.406076] pci 0000:01:00.0: reg 0x30: [mem 0xf9ee0000-0xf9eeffff pref]
[ 0.406104] pci 0000:01:00.0: PME# supported from D3hot
[ 0.411907] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.411972] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.411975] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.412025] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.412040] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit]
[ 0.412110] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.419926] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.419996] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.420057] pci 0000:03:00.0: [10de:0de0] type 00 class 0x030000
[ 0.420066] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.420075] pci 0000:03:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.420084] pci 0000:03:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
[ 0.420091] pci 0000:03:00.0: reg 0x24: [io 0xcc00-0xcc7f]
[ 0.420097] pci 0000:03:00.0: reg 0x30: [mem 0xfbc00000-0xfbc7ffff pref]
[ 0.420168] pci 0000:03:00.1: [10de:0bea] type 00 class 0x040300
[ 0.420177] pci 0000:03:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff]
[ 0.427923] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.427988] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.427991] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.427995] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.428029] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.428134] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.428199] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.428278] pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
[ 0.428306] pci 0000:05:00.0: reg 0x10: [io 0xdc00-0xdc07]
[ 0.428318] pci 0000:05:00.0: reg 0x14: [io 0xd880-0xd883]
[ 0.428331] pci 0000:05:00.0: reg 0x18: [io 0xd800-0xd807]
[ 0.428343] pci 0000:05:00.0: reg 0x1c: [io 0xd480-0xd483]
[ 0.428356] pci 0000:05:00.0: reg 0x20: [io 0xd400-0xd40f]
[ 0.428368] pci 0000:05:00.0: reg 0x24: [mem 0xfbdff000-0xfbdff1ff]
[ 0.428381] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.428430] pci 0000:05:00.0: PME# supported from D3hot
[ 0.435944] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.436012] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.436015] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.436070] pci 0000:07:01.0: [10ec:8167] type 00 class 0x020000
[ 0.436088] pci 0000:07:01.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.436096] pci 0000:07:01.0: reg 0x14: [mem 0xfbeff000-0xfbeff0ff]
[ 0.436132] pci 0000:07:01.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
[ 0.436164] pci 0000:07:01.0: supports D1 D2
[ 0.436166] pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.436206] pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010
[ 0.436222] pci 0000:07:02.0: reg 0x10: [mem 0xfbefe000-0xfbefe7ff]
[ 0.436230] pci 0000:07:02.0: reg 0x14: [io 0xec00-0xec7f]
[ 0.436292] pci 0000:07:02.0: supports D2
[ 0.436293] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
[ 0.436350] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.436414] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.436417] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.436422] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.436423] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.436425] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.436426] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.436428] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.436429] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.436867] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.437376] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.437882] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.438388] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.438896] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.439403] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.439912] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.440422] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.440968] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.441105] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.441135] Found 1 acpi root devices
[ 0.441206] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.441284] vgaarb: loaded
[ 0.441339] vgaarb: bridge control possible 0000:03:00.0
[ 0.441428] PCI: Using ACPI for IRQ routing
[ 0.448584] PCI: Discovered peer bus ff
[ 0.448643] PCI: root bus ff: using default resources
[ 0.448644] PCI: Probing PCI hardware (bus ff)
[ 0.448673] PCI host bridge to bus 0000:ff
[ 0.448732] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.448794] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.448856] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.448937] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
[ 0.448973] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
[ 0.449003] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
[ 0.449031] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
[ 0.449060] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
[ 0.449088] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
[ 0.449117] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.449145] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
[ 0.449173] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
[ 0.449201] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
[ 0.449230] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
[ 0.449259] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
[ 0.449287] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
[ 0.449320] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.449348] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.449377] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
[ 0.449405] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
[ 0.449433] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
[ 0.449461] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
[ 0.449497] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.449501] PCI: pci_cache_line_size set to 64 bytes
[ 0.449574] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.449575] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
[ 0.449663] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.449728] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.449973] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.452252] Switched to clocksource hpet
[ 0.453573] pnp: PnP ACPI init
[ 0.453635] ACPI: bus type PNP registered
[ 0.453740] system 00:00: [mem 0xfbf00000-0xfbffffff] could not be reserved
[ 0.453804] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.453865] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.453928] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.453989] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 0.454052] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
[ 0.454115] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.454151] pnp 00:01: [dma 4]
[ 0.454166] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.454191] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.454209] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.454229] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.454306] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.454369] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454544] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.454608] system 00:06: [io 0x0800-0x087f] could not be reserved
[ 0.454669] system 00:06: [io 0x0500-0x057f] could not be reserved
[ 0.454731] system 00:06: [io 0x0600-0x0607] has been reserved
[ 0.454792] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.454854] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.454917] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.454979] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.455043] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.455090] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.455143] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.455206] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.455288] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.455351] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.455413] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.455571] pnp 00:0b: [dma 0 disabled]
[ 0.455619] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.455660] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.455719] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.455783] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.455942] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.456006] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.456069] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.456131] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.456194] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.456261] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.456360] pnp: PnP ACPI: found 15 devices
[ 0.456418] ACPI: bus type PNP unregistered
[ 0.463834] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.463837] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 400000
[ 0.463845] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x001fffff pref] to [bus 05] add_size 200000
[ 0.463860] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.463924] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.463926] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.463928] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.463931] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[ 0.463994] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc06fffff pref]
[ 0.464071] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.464133] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.464193] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.464265] pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
[ 0.464331] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.464392] pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.464458] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.464517] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.464580] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.464643] pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.464722] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.464786] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.464846] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.464908] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 0.464972] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.465053] pci 0000:05:00.0: BAR 6: assigned [mem 0xc0400000-0xc040ffff pref]
[ 0.465130] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.465190] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.465253] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.465317] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc06fffff pref]
[ 0.465396] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.465455] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.465518] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.465585] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.465586] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.465588] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.465589] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.465591] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.465592] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.465594] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.465595] pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff]
[ 0.465597] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.465599] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.465600] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbcfffff]
[ 0.465602] pci_bus 0000:03: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.465603] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.465605] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc03fffff]
[ 0.465606] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.465608] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.465609] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.465611] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc06fffff pref]
[ 0.465612] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 0.465614] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.465615] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.465617] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.465618] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.465620] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.465621] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.465623] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.465626] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.465627] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.465707] NET: Registered protocol family 2
[ 0.466032] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.466546] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.466723] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.466797] TCP: reno registered
[ 0.466879] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.467043] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.467258] NET: Registered protocol family 1
[ 0.468833] pci 0000:03:00.0: Boot video device
[ 0.468846] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.468896] Unpacking initramfs...
[ 0.740554] Freeing initrd memory: 14972K (ffff8800362b2000 - ffff880037151000)
[ 0.740650] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.740712] software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
[ 0.741015] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x19
[ 0.741079] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x19
[ 0.741144] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x19
[ 0.741209] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x19
[ 0.742235] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x19
[ 0.742300] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x19
[ 0.742364] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x19
[ 0.742428] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x19
[ 0.742524] microcode: Microcode Update Driver: v2.00, Peter Oruba
[ 0.742887] audit: initializing netlink socket (disabled)
[ 0.742953] type=2000 audit(1389901435.592:1): initialized
[ 0.757603] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.758432] VFS: Disk quotas dquot_6.5.2
[ 0.758518] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.758646] msgmni has been set to 32768
[ 0.758928] alg: No test for stdrng (krng)
[ 0.759007] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.759119] io scheduler noop registered
[ 0.759177] io scheduler deadline registered
[ 0.759255] io scheduler cfq registered (default)
[ 0.759483] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.759665] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[ 0.759806] pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X
[ 0.759869] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.759939] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.760020] intel_idle: MWAIT substates: 0x1120
[ 0.760029] intel_idle: v0.4 model 0x1A
[ 0.760030] intel_idle: lapic_timer_reliable_states 0x2
[ 0.760189] GHES: HEST is not enabled!
[ 0.760288] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.783901] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.784298] Linux agpgart interface v0.103
[ 0.784458] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.784520] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.785077] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.785211] mousedev: PS/2 mouse device common for all mice
[ 0.785300] rtc_cmos 00:02: RTC can wake from S4
[ 0.785459] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.785542] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.785626] AMD IOMMUv2 driver by Joerg Roedel
[ 0.785686] AMD IOMMUv2 functionality not available on this system
[ 0.785818] TCP: cubic registered
[ 0.787353] NET: Registered protocol family 10
[ 0.788078] mip6: Mobile IPv6
[ 0.788135] NET: Registered protocol family 17
[ 0.788194] mpls_gso: MPLS GSO support
[ 0.788591] registered taskstats version 1
[ 0.789850] rtc_cmos 00:02: setting system clock to 2014-01-16 19:43:56 UTC (1389901436)
[ 0.789945] PM: Hibernation image not present or could not be loaded.
[ 0.790847] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000)
[ 0.790924] Write protecting the kernel read-only data: 8192k
[ 0.795913] Freeing unused kernel memory: 1332K (ffff8800014b3000 - ffff880001600000)
[ 0.797252] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
[ 0.809128] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.857903] systemd-udevd[95]: starting version 204
[ 0.872833] SCSI subsystem initialized
[ 0.873275] ACPI: bus type USB registered
[ 0.873358] usbcore: registered new interface driver usbfs
[ 0.873431] usbcore: registered new interface driver hub
[ 0.873686] usbcore: registered new device driver usb
[ 0.874038] libata version 3.00 loaded.
[ 0.874549] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.874619] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 0.874768] ahci 0000:00:1f.2: version 3.0
[ 0.874826] xhci_hcd 0000:02:00.0: irq 66 for MSI/MSI-X
[ 0.874836] xhci_hcd 0000:02:00.0: irq 67 for MSI/MSI-X
[ 0.874843] xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
[ 0.874851] xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
[ 0.874857] xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
[ 0.874863] xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
[ 0.874870] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
[ 0.874877] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
[ 0.874903] ahci 0000:00:1f.2: irq 74 for MSI/MSI-X
[ 0.874968] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.875009] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.875011] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.875012] usb usb1: Product: xHCI Host Controller
[ 0.875013] usb usb1: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.875015] usb usb1: SerialNumber: 0000:02:00.0
[ 0.875113] hub 1-0:1.0: USB hub found
[ 0.875122] hub 1-0:1.0: 2 ports detected
[ 0.875210] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.875214] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.875628] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 0.875724] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.876022] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.878403] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.878472] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.878552] usb usb2: Product: xHCI Host Controller
[ 0.878614] usb usb2: Manufacturer: Linux 3.13.0-rc8+ xhci_hcd
[ 0.878677] usb usb2: SerialNumber: 0000:02:00.0
[ 0.878852] hub 2-0:1.0: USB hub found
[ 0.878919] hub 2-0:1.0: 2 ports detected
[ 0.883308] ehci-pci: EHCI PCI platform driver
[ 0.888522] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.888664] r8169 0000:07:01.0 (unregistered net_device): not PCI Express
[ 0.888950] r8169 0000:07:01.0 eth0: RTL8169sc/8110sc at 0xffffc90003052000, 54:04:a6:49:30:b0, XID 18000000 IRQ 19
[ 0.889033] r8169 0000:07:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 0.912926] scsi0 : ahci
[ 0.913497] scsi1 : ahci
[ 0.913635] scsi2 : ahci
[ 0.913781] scsi3 : ahci
[ 0.913927] scsi4 : ahci
[ 0.914074] scsi5 : ahci
[ 0.914155] ata1: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc100 irq 74
[ 0.914231] ata2: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc180 irq 74
[ 0.914308] ata3: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc200 irq 74
[ 0.914385] ata4: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc280 irq 74
[ 0.914462] ata5: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc300 irq 74
[ 0.914539] ata6: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc380 irq 74
[ 0.914689] ahci 0000:01:00.0: irq 75 for MSI/MSI-X
[ 0.914701] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
[ 0.914781] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.914848] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.914961] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 0.915058] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.915120] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.915197] usb usb3: Product: UHCI Host Controller
[ 0.915255] usb usb3: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.915315] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.915533] hub 3-0:1.0: USB hub found
[ 0.915598] hub 3-0:1.0: 2 ports detected
[ 0.915808] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.915870] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.915973] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 0.916063] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.916125] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.916201] usb usb4: Product: UHCI Host Controller
[ 0.916260] usb usb4: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.916320] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.916564] hub 4-0:1.0: USB hub found
[ 0.916628] hub 4-0:1.0: 2 ports detected
[ 0.916830] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.916893] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.916995] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00
[ 0.917085] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.917147] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.917224] usb usb5: Product: UHCI Host Controller
[ 0.917282] usb usb5: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.917342] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.917533] hub 5-0:1.0: USB hub found
[ 0.917598] hub 5-0:1.0: 2 ports detected
[ 0.917803] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.917865] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.917968] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 0.918059] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.918122] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.918198] usb usb6: Product: UHCI Host Controller
[ 0.918256] usb usb6: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.918316] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.918509] hub 6-0:1.0: USB hub found
[ 0.918574] hub 6-0:1.0: 2 ports detected
[ 0.918781] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.918843] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.918938] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 0.919028] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.919091] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.919167] usb usb7: Product: UHCI Host Controller
[ 0.919226] usb usb7: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.919286] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.919521] hub 7-0:1.0: USB hub found
[ 0.919587] hub 7-0:1.0: 2 ports detected
[ 0.919789] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.919852] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.919947] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 0.920037] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.921054] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.921130] usb usb8: Product: UHCI Host Controller
[ 0.921188] usb usb8: Manufacturer: Linux 3.13.0-rc8+ uhci_hcd
[ 0.921249] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.921408] hub 8-0:1.0: USB hub found
[ 0.921471] hub 8-0:1.0: 2 ports detected
[ 0.921948] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.922014] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 9
[ 0.922106] ehci-pci 0000:00:1a.7: debug port 1
[ 0.926059] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.926065] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff000
[ 0.928509] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 0.928594] ahci 0000:01:00.0: flags: 64bit ncq fbs pio
[ 0.929285] scsi6 : ahci
[ 0.929439] scsi7 : ahci
[ 0.929589] scsi8 : ahci
[ 0.929740] scsi9 : ahci
[ 0.929894] scsi10 : ahci
[ 0.930050] scsi11 : ahci
[ 0.930203] scsi12 : ahci
[ 0.930357] scsi13 : ahci
[ 0.930442] ata7: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 75
[ 0.930520] ata8: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 75
[ 0.930596] ata9: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 75
[ 0.930673] ata10: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 75
[ 0.930749] ata11: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 75
[ 0.930826] ata12: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 75
[ 0.930903] ata13: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff400 irq 75
[ 0.930980] ata14: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff480 irq 75
[ 0.931172] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.931252] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.931545] scsi14 : ahci
[ 0.931666] scsi15 : ahci
[ 0.931753] ata15: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff100 irq 16
[ 0.931831] ata16: SATA max UDMA/133 abar m512@0xfbdff000 port 0xfbdff180 irq 16
[ 0.936417] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.936550] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.936614] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.936690] usb usb9: Product: EHCI Host Controller
[ 0.936749] usb usb9: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 0.936809] usb usb9: SerialNumber: 0000:00:1a.7
[ 0.936967] hub 9-0:1.0: USB hub found
[ 0.937032] hub 9-0:1.0: 6 ports detected
[ 0.961290] firewire_ohci 0000:07:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 0.961312] hub 3-0:1.0: USB hub found
[ 0.961318] hub 3-0:1.0: 2 ports detected
[ 0.984579] hub 4-0:1.0: USB hub found
[ 0.984644] hub 4-0:1.0: 2 ports detected
[ 1.008655] hub 5-0:1.0: USB hub found
[ 1.008719] hub 5-0:1.0: 2 ports detected
[ 1.009100] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.009164] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 10
[ 1.010960] ehci-pci 0000:00:1d.7: debug port 1
[ 1.014920] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.014926] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dfe000
[ 1.024573] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.024664] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.024731] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.024807] usb usb10: Product: EHCI Host Controller
[ 1.024866] usb usb10: Manufacturer: Linux 3.13.0-rc8+ ehci_hcd
[ 1.024927] usb usb10: SerialNumber: 0000:00:1d.7
[ 1.025223] hub 10-0:1.0: USB hub found
[ 1.025288] hub 10-0:1.0: 6 ports detected
[ 1.048618] hub 6-0:1.0: USB hub found
[ 1.048686] hub 6-0:1.0: 2 ports detected
[ 1.072616] hub 7-0:1.0: USB hub found
[ 1.072685] hub 7-0:1.0: 2 ports detected
[ 1.096632] hub 8-0:1.0: USB hub found
[ 1.096704] hub 8-0:1.0: 2 ports detected
[ 1.248708] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.248746] ata16: SATA link down (SStatus 0 SControl 300)
[ 1.248789] ata15: SATA link down (SStatus 0 SControl 300)
[ 1.248914] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.248991] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.249096] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.249169] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.249239] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.249523] ata14.00: configured for UDMA/66
[ 1.252598] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.252679] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.256664] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.404717] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.404802] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.404875] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.404948] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.405021] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.406100] ata6.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.406177] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.406251] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.406318] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.406390] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.406452] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.406519] ata5.00: ATA-8: ST31000340AS, SD15, max UDMA/133
[ 1.406581] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.409065] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33
[ 1.409132] ata2.00: applying bridge limits
[ 1.409387] ata1.00: configured for UDMA/133
[ 1.409462] ata4.00: configured for UDMA/133
[ 1.409535] ata6.00: configured for UDMA/133
[ 1.409638] ata5.00: configured for UDMA/133
[ 1.409758] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.412266] ata2.00: configured for UDMA/33
[ 1.412633] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.413843] ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.413905] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.414261] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
[ 1.415240] ata3.00: configured for UDMA/133
[ 1.415390] scsi 2:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.415417] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.415490] sd 0:0:0:0: [sda] Write Protect is off
[ 1.415491] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.415523] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.415809] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.415916] scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.415951] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.415952] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.415973] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.416245] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.416329] scsi 4:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
[ 1.416407] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.416409] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.416440] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.416646] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.416759] scsi 5:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.416799] sd 4:0:0:0: [sdd] Write Protect is off
[ 1.416800] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.416827] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.417102] sd 5:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.417272] sd 5:0:0:0: [sde] Write Protect is off
[ 1.417331] scsi 13:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
[ 1.417414] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.417415] sdc: sdc1 sdc2 sdc3
[ 1.417514] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.417676] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.418576] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.418668] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.418758] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.418846] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.418935] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 1.419028] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 1.419113] scsi 13:0:0:0: Attached scsi generic sg6 type 3
[ 1.421889] sda: sda1 sda2 sda3
[ 1.422019] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.422099] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.422249] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.422280] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.429983] sdb: sdb1 sdb2 sdb3
[ 1.430782] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.431761] sdd: sdd1 sdd2 sdd3
[ 1.432367] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 1.442578] sde: sde1 sde2 sde3
[ 1.443252] sd 5:0:0:0: [sde] Attached SCSI disk
[ 1.460705] firewire_core 0000:07:02.0: created device fw0: GUID 001fc600001acd8c, S400
[ 1.740715] tsc: Refined TSC clocksource calibration: 2806.361 MHz
[ 1.743010] random: nonblocking pool is initialized
[ 1.836374] md: md127 stopped.
[ 1.836717] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[ 1.840810] md: bind
[ 1.841257] md: bind
[ 1.841670] md: bind
[ 1.841899] md: bind
[ 1.846963] md: bind
[ 1.848319] md: raid10 personality registered for level 10
[ 1.848729] md/raid10:md127: active with 4 out of 4 devices
[ 1.848930] created bitmap (466 pages) for device md127
[ 1.862800] md127: bitmap initialized from disk: read 30 pages, set 0 of 953616 bits
[ 1.891778] md127: detected capacity change from 0 to 1999877701632
[ 1.891864] RAID10 conf printout:
[ 1.891867] --- wd:4 rd:4
[ 1.891869] disk 0, wo:0, o:1, dev:sda3
[ 1.891875] disk 1, wo:0, o:1, dev:sdc3
[ 1.891876] disk 2, wo:0, o:1, dev:sdb3
[ 1.891877] disk 3, wo:0, o:1, dev:sdd3
[ 1.893251] md127: unknown partition table
[ 1.928165] device-mapper: uevent: version 1.0.3
[ 1.928285] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
[ 1.970135] bio: create slab at 1
[ 2.014894] usb 8-1: New USB device found, idVendor=046d, idProduct=c01e
[ 2.014963] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.015030] usb 8-1: Product: USB-PS/2 Optical Mouse
[ 2.015088] usb 8-1: Manufacturer: Logitech
[ 2.020000] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.035997] usbcore: registered new interface driver usbhid
[ 2.036059] usbhid: USB HID core driver
[ 2.039750] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
[ 2.039966] hid-generic 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 2.069935] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.256949] usb 8-2: new low-speed USB device number 3 using uhci_hcd
[ 2.567106] usb 8-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.567175] usb 8-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.567242] usb 8-2: Product: Back-UPS RS 1500 FW:8.g9 .D USB FW:g9
[ 2.567304] usb 8-2: Manufacturer: American Power Conversion
[ 2.567364] usb 8-2: SerialNumber: JB0539032829
[ 2.741406] Switched to clocksource tsc
[ 3.639622] hid-generic 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:1d.2-2/input0
[ 12.992509] systemd-udevd[605]: starting version 204
[ 13.526865] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 13.527040] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.527122] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 13.527280] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.527360] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20131115/utaddress-251)
[ 13.527517] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.527597] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 13.543090] EDAC MC: Ver: 3.0.0
[ 13.550602] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 13.550710] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 13.550798] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 13.565571] ACPI Warning: 0x0000000000001000-0x000000000000101f SystemIO conflicts with Region \SMRG 1 (20131115/utaddress-251)
[ 13.565733] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.587366] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 13.587450] ACPI: Power Button [PWRB]
[ 13.587551] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 13.587630] ACPI: Power Button [PWRF]
[ 13.589599] [drm] Initialized drm 1.1.0 20060810
[ 13.701591] wmi: Mapper loaded
[ 13.726166] systemd-udevd[651]: renamed network interface eth0 to lan
[ 13.754012] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 13.760019] ATK0110 ATK0110:00: Overriding interface detection
[ 13.820541] iTCO_vendor_support: vendor-support=0
[ 13.845409] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 13.847237] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 13.847381] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 13.860321] nouveau: unknown parameter 'perflvl_wr' ignored
[ 13.860587] MXM: GUID detected in BIOS
[ 13.860876] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0c1000a1
[ 13.860938] nouveau [ DEVICE][0000:03:00.0] Chipset: GF108 (NVC1)
[ 13.860999] nouveau [ DEVICE][0000:03:00.0] Family : NVC0
[ 13.861940] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
[ 13.927768] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
[ 13.927832] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
[ 13.927989] nouveau [ VBIOS][0000:03:00.0] BIT signature found
[ 13.928050] nouveau [ VBIOS][0000:03:00.0] version 70.08.4d.00.00
[ 13.928328] nouveau 0000:03:00.0: irq 76 for MSI/MSI-X
[ 13.928335] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
[ 13.930142] nouveau W[ PFB][0000:03:00.0][0x00000000][ffff88061e631800] reclocking of this ram type unsupported
[ 13.930260] nouveau [ PFB][0000:03:00.0] RAM type: DDR3
[ 13.930349] nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB
[ 13.930443] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
[ 13.960704] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
[ 13.960802] nouveau [ PTHERM][0000:03:00.0] fan management: automatic
[ 13.960896] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
[ 13.961013] nouveau [ CLK][0000:03:00.0] 03: core 50 MHz memory 135 MHz
[ 13.961105] nouveau [ CLK][0000:03:00.0] 07: core 405 MHz memory 324 MHz
[ 13.961216] nouveau [ CLK][0000:03:00.0] 0f: core 810 MHz memory 900 MHz
[ 13.961474] nouveau [ CLK][0000:03:00.0] --: core 405 MHz memory 324 MHz
[ 13.965856] md: bind
[ 13.971577] [TTM] Zone kernel: Available graphics memory: 12368142 kiB
[ 13.971671] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 13.971762] [TTM] Initializing pool allocator
[ 13.971854] [TTM] Initializing DMA pool allocator
[ 13.971953] nouveau [ DRM] VRAM: 512 MiB
[ 13.972043] nouveau [ DRM] GART: 1048576 MiB
[ 13.972132] nouveau [ DRM] TMDS table version 2.0
[ 13.972221] nouveau [ DRM] DCB version 4.0
[ 13.972308] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 13.972398] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 13.972488] nouveau [ DRM] DCB outp 02: 08011392 00020020
[ 13.972582] nouveau [ DRM] DCB outp 03: 04022310 00000000
[ 13.972674] nouveau [ DRM] DCB conn 00: 00001030
[ 13.972826] nouveau [ DRM] DCB conn 01: 00002161
[ 13.972977] nouveau [ DRM] DCB conn 02: 00000200
[ 13.974024] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.974114] [drm] No driver support for vblank timestamp query.
[ 13.988791] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 14.024814] md: bind
[ 14.046952] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 14.073508] snd_hda_intel 0000:00:1b.0: irq 77 for MSI/MSI-X
[ 14.079696] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88061d8c2800
[ 14.079890] fbcon: nouveaufb (fb0) is primary device
[ 14.098104] md: bind
[ 14.127062] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.127111] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.127151] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 14.127190] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 14.127231] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 14.127270] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.127309] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 14.127349] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 14.150927] md: bind
[ 14.157534] Console: switching to colour frame buffer device 128x48
[ 14.158695] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
[ 14.158708] nouveau 0000:03:00.0: registered panic notifier
[ 14.158722] [drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
[ 14.158875] hda_intel: Disabling MSI
[ 14.158905] hda-intel 0000:03:00.1: Handle VGA-switcheroo audio client
[ 14.190837] md: bind
[ 14.215740] md: raid1 personality registered for level 1
[ 14.216101] md/raid1:md0: active with 5 out of 5 mirrors
[ 14.218657] created bitmap (16 pages) for device md0
[ 14.219260] md0: bitmap initialized from disk: read 2 pages, set 0 of 32096 bits
[ 14.231555] md0: detected capacity change from 0 to 131465216
[ 14.231664] RAID1 conf printout:
[ 14.231668] --- wd:5 rd:5
[ 14.231671] disk 0, wo:0, o:1, dev:sda1
[ 14.231673] disk 1, wo:0, o:1, dev:sdc1
[ 14.231675] disk 2, wo:0, o:1, dev:sdb1
[ 14.231677] disk 3, wo:0, o:1, dev:sdd1
[ 14.231679] disk 4, wo:0, o:1, dev:sde1
[ 14.234020] md0: unknown partition table
[ 14.965054] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
[ 14.965520] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
[ 14.965964] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14
[ 14.966411] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input13
[ 15.496666] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 15.905182] RAID10 conf printout:
[ 15.905188] --- wd:4 rd:4
[ 15.905193] disk 0, wo:0, o:1, dev:sda3
[ 15.905196] disk 1, wo:0, o:1, dev:sdc3
[ 15.905199] disk 2, wo:0, o:1, dev:sdb3
[ 15.905202] disk 3, wo:0, o:1, dev:sdd3
[ 16.033206] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,errors=remount-ro
[ 16.465027] loop: module loaded
[ 17.806651] Adding 5857276k swap on /dev/mapper/Zia-swap_crypt. Priority:-1 extents:1 across:5857276k
[ 18.813884] EXT4-fs (md0): mounting ext2 file system using the ext4 subsystem
[ 18.955306] EXT4-fs (md0): mounted filesystem without journal. Opts: (null)
[ 19.063331] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 19.072942] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: user_xattr
[ 19.140589] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 19.164405] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 19.195524] FAT-fs (sdc2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 19.208240] FAT-fs (sdc2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 19.221636] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 19.223272] FAT-fs (sdb2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 19.250690] FAT-fs (sdd2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 19.262259] FAT-fs (sdd2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 20.136642] Bridge firewalling registered
[ 20.139914] device lan entered promiscuous mode
[ 20.155416] r8169 0000:07:01.0 lan: link down
[ 20.155475] r8169 0000:07:01.0 lan: link down
[ 20.156173] IPv6: ADDRCONF(NETDEV_UP): lan: link is not ready
[ 20.159615] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 22.966015] r8169 0000:07:01.0 lan: link up
[ 22.966286] IPv6: ADDRCONF(NETDEV_CHANGE): lan: link becomes ready
[ 22.969072] br0: port 1(lan) entered forwarding state
[ 22.970674] br0: port 1(lan) entered forwarding state
[ 22.972315] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 23.802549] RPC: Registered named UNIX socket transport module.
[ 23.802703] RPC: Registered udp transport module.
[ 23.802988] RPC: Registered tcp transport module.
[ 23.803432] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 23.812593] FS-Cache: Loaded
[ 23.826837] FS-Cache: Netfs 'nfs' registered for caching
[ 23.986609] Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
[ 24.972021] br0: port 1(lan) entered forwarding state
[ 191.606562] tun: Universal TUN/TAP device driver, 1.6
[ 191.606773] tun: (C) 1999-2004 Max Krasnyansky
[ 201.333408] CacheFiles: Loaded
[ 201.919717] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 201.964146] NFSD: starting 90-second grace period (net ffffffff81885e00)
[ 202.731250] lp: driver loaded but no devices found
[ 202.733483] ppdev: user-space parallel port driver
[ 205.260548] FS-Cache: Cache "mycache" added (type cachefiles)
[ 205.260554] CacheFiles: File cache on dm-0 registered
[ 209.909484] Ebtables v2.0 registered
[ 209.951359] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 209.969159] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 216.478120] postgres (6026): /proc/6026/oom_adj is deprecated, please use /proc/6026/oom_score_adj instead.
[ 223.000968] watchdog watchdog0: nowayout prevents watchdog being stopped!
[ 223.000972] watchdog watchdog0: watchdog did not stop!
[ 236.339128] type=1006 audit(1389901671.250:2): pid=5071 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
[ 431.281434] do_IRQ: 0.196 No irq handler for vector (irq -1)
next prev parent reply other threads:[~2014-01-16 20:07 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-14 17:41 PROBLEM: do_IRQ: [number] No irq handler for vector (irq -1) Anthony DeRobertis
[not found] ` <52D576E3.8050006-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-16 4:03 ` Alex Williamson
[not found] ` <1389844985.8705.45.camel-xdHQ/5r00wBBDLzU/O5InQ@public.gmane.org>
2014-01-16 12:16 ` Neil Horman
[not found] ` <20140116121617.GA9984-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
2014-01-16 17:08 ` Anthony DeRobertis
[not found] ` <52D8120D.7090606-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-16 18:21 ` Neil Horman
[not found] ` <20140116182134.GC9984-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
2014-01-16 20:07 ` Anthony DeRobertis [this message]
[not found] ` <52D83BF9.7040502-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-17 14:08 ` Neil Horman
[not found] ` <20140117140831.GA19452-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
2014-01-17 18:52 ` Anthony DeRobertis
[not found] ` <52D97BFB.1020106-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-17 20:27 ` Neil Horman
[not found] ` <20140117202712.GC19452-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
2014-01-17 22:33 ` Anthony DeRobertis
[not found] ` <52D9AFBB.5080203-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-20 12:26 ` Neil Horman
[not found] ` <20140120122630.GB22690-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
2014-01-22 16:29 ` Anthony DeRobertis
[not found] ` <52DFF1FE.2080805-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-22 18:17 ` Neil Horman
[not found] ` <20140122181707.GA14646-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
2014-01-22 19:41 ` Anthony DeRobertis
[not found] ` <52E01ED2.4080604-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-23 12:37 ` Neil Horman
[not found] ` <20140123123743.GA26800-B26myB8xz7F8NnZeBjwnZQMhkBWG/bsMQH7oEaQurus@public.gmane.org>
2014-01-23 19:24 ` Anthony DeRobertis
[not found] ` <52E16C56.9000709-VnMYzjHJ8tfR7s880joybQ@public.gmane.org>
2014-01-23 21:51 ` Neil Horman
2014-01-16 17:17 ` Anthony DeRobertis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52D83BF9.7040502@metrics.net \
--to=aderobertis-vnmyzjhj8tfr7s880joybq@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=nhorman-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.