[PATCH v3 2/8] clk: sunxi: update clock-output-names dt binding documentation

[emilio@elopez.com.ar (Emilio López)]

Hi,

El 09/01/14 05:52, Chen-Yu Tsai escribi?:
> clock-output-names is now required for most of sunxi clock nodes, to
> provide the name of the corresponding clock. Add the new requirements,
> exceptions, as well as examples.
>
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>   Documentation/devicetree/bindings/clock/sunxi.txt | 36 +++++++++++++++++++----
>   1 file changed, 31 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> index 0c127cd..8a9147d 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> @@ -44,10 +44,18 @@ Required properties for all clocks:
>   	multiplexed clocks, the list order must match the hardware
>   	programming order.
>   - #clock-cells : from common clock binding; shall be set to 0 except for
> -	"allwinner,*-gates-clk" where it shall be set to 1
> +	"allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk" and
> +	"allwinner,sun4i-pll6-clk" where it shall be set to 1
>
> -Additionally, "allwinner,*-gates-clk" clocks require:
> -- clock-output-names : the corresponding gate names that the clock controls
> +Additionally, most clocks require "clock-output-names":
> +- "allwinner,*-gates-clk" : the corresponding gate names that the clock controls
> +- "allwinner,sun4i-pll5-clk" : "pll5_ddr", "pll5_mbus"
> +- "allwinner,sun4i-pll6-clk" : "pll6_sata", "pll6_other"
> +- "allwinner,sun4i-cpu-clk", "allwinner,sun4i-axi-clk",
> +  "allwinner,sun4i-ahb-clk", "allwinner,sun4i-ahb-clk",
> +  "allwinner,sun4i-apb1-mux-clk", "allwinner,sun4i-apb1-clk"
> +  do not need "clock-output-names"
> +- all others clocks : the corresponding module name of that clock

As we discussed on IRC, I wonder if such verbosity is actually needed. 
Maybe we should dictate that all clocks must list their corresponding 
outputs on clock-output-names (with it being the module name if it only 
has one output).

Cheers,

Emilio