Hey John,

Wow, that is really surprisin= g. =A0I will give that build a try tonight and see my results.

Do I exclude git by writing the line "DISTRO_FEATURES_rem= ove =3D "git"" in my local.conf?

If this solves it, you will be my hero.

<= /div>

Thanks!

Jay

<= br>

On Tue, Jan 21, 2014 at 4:57 PM, John Weber <= span dir=3D"ltr"><rjohnweber@gmail.com> wrote:

=20 =20 =20
Hi Jay,

On 1/19/14 3:21 PM, Jay Cady wrote:

Hi,

I'm trying to integrate Qt5 with Yocto on the Wandboard Dual (i.MX6). =A0I've been following these two tutorials:

http://wiki.wandboard.org/index= .php/Getting_started_with_Yocto_on_Wandboard

http://wiki.wandboard.org/index.p= hp/Building_Qt5_using_yocto_on_Wandboard

The problem occurs when I am ready to bitbake the meta-qt5 recipe into the core-image-minimal. =A0I add the recommended features to the local.conf and remove the x11 and wayland components in order to get the eglfs drivers. =A0Then I bitbake core-image-minimal, the bitbake succeeds fine. =A0I then run a dd command to write the core-image-minimal-wandboard-dual.sdcard to my sdcard.

I was curious so I tried replicating those steps and was able to get it to fail on my Wandboard Dual immediately.

There are a LOT of packages added to the image, so I figured that one of them was somehow causing the problem.=A0 I started binary searching.=A0 After 9 iterations of including/excluding packages from the build, I found that GIT of all things was causing the kernel panic.=A0 If you exclude git, then you get a successful boot.

That is just weird.=A0 I don't have the time to figure out w= hy this is, but I hope that this helps you.

John
Finally, upon inserting the sdcard into my wandboard, I boot it up and view the output through serial. =A0The boot fails with a "Kernel panic - not syncing: No init found.".

Here is the log of the first boot: http://pastebin.com/gr8LpMRU

And here is the log of when the board is reset:=A0http://pastebin.com/eauuw3Q2=

Does anyone have any idea why this is happening and how I can fix it?

Thank you!
_______________________________________________
meta-freescale mailing list
meta-f=
reescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale
_______________________________________________
meta-freescale mailing list
meta-freescale@yoctoproj= ect.org
https://lists.yoctoproject.org/listinfo/meta-freescale

--089e01681a0e9df1bc04f0823964-- From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-ea0-f174.google.com (mail-ea0-f174.google.com [209.85.215.174]) by yocto-www.yoctoproject.org (Postfix) with ESMTP id 0D4D7E00819 for ; Wed, 22 Jan 2014 07:37:36 -0800 (PST) Received: by mail-ea0-f174.google.com with SMTP id b10so4720220eae.33 for ; Wed, 22 Jan 2014 07:37:34 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:in-reply-to:references:from:date:message-id:subject:to :content-type; bh=i0beWGgIgWJHPD4LM07sBzdD+Lk8CRJpXntQbd1e5FE=; b=Mbhq2qpJ+hGnX7jDf941EuwH+GoeAT53RoRKPPolm3LL6cvOMmlkj7qczUqVFBszWt 01+d0iz8y9yfcbo5bLu0D6oxMQD3XJgu8c4DkI7y/EqR0E8R+OBOTAi/WV3jDDVjmHym Bw+wfMZdqXddFeScxWMHwh9Z8Jj8/X7XbsQQjTZyvunVVTeDvmd2QRDaxT6Q97JnoyVy eTtAknF6l9y7RdbAaeiOZmcJ/eorMABiTiTBURdbxlwCEMBFFq91TD8W5RWXHw0x6aTg M/u4yF0/UhrO070dfnZQ3hrNOSo9v4eKZxT5G11/EgWxG8eGCmhISFFGxkvcCTDGOXw8 pFgg== X-Received: by 10.15.109.196 with SMTP id cf44mr2156540eeb.12.1390405054533; Wed, 22 Jan 2014 07:37:34 -0800 (PST) MIME-Version: 1.0 Received: by 10.15.48.198 with HTTP; Wed, 22 Jan 2014 07:37:14 -0800 (PST) In-Reply-To: References: <52DEED5C.6070401@gmail.com> From: Jay Cady Date: Wed, 22 Jan 2014 10:37:14 -0500 Message-ID: To: meta-freescale@yoctoproject.org Subject: Re: Yocto Qt5 Integration for Wandboard - Kernel Panic X-BeenThere: meta-freescale@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Usage and development list for the meta-fsl-* layers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 22 Jan 2014 15:37:39 -0000 Content-Type: multipart/alternative; boundary=089e016814cc5e95b204f090e7c5 --089e016814cc5e95b204f090e7c5 Content-Type: text/plain; charset=ISO-8859-1 All, John's solution worked marvelously. The wiki page has been updated for anyone else in my situation. If anyone encounters the same error, simply don't include git in the install_appends. Thanks John! On Tue, Jan 21, 2014 at 5:06 PM, Jay Cady wrote: > Hey John, > > Wow, that is really surprising. I will give that build a try tonight and > see my results. > > Do I exclude git by writing the line "DISTRO_FEATURES_remove = "git"" in > my local.conf? > > If this solves it, you will be my hero. > > Thanks! > Jay > > > On Tue, Jan 21, 2014 at 4:57 PM, John Weber wrote: > >> Hi Jay, >> >> >> On 1/19/14 3:21 PM, Jay Cady wrote: >> >> Hi, >> >> I'm trying to integrate Qt5 with Yocto on the Wandboard Dual (i.MX6). >> I've been following these two tutorials: >> >> >> http://wiki.wandboard.org/index.php/Getting_started_with_Yocto_on_Wandboard >> >> >> http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard >> >> The problem occurs when I am ready to bitbake the meta-qt5 recipe into >> the core-image-minimal. I add the recommended features to the local.conf >> and remove the x11 and wayland components in order to get the eglfs >> drivers. Then I bitbake core-image-minimal, the bitbake succeeds fine. I >> then run a dd command to write the core-image-minimal-wandboard-dual.sdcard >> to my sdcard. >> >> I was curious so I tried replicating those steps and was able to get it >> to fail on my Wandboard Dual immediately. >> >> There are a LOT of packages added to the image, so I figured that one of >> them was somehow causing the problem. I started binary searching. After 9 >> iterations of including/excluding packages from the build, I found that GIT >> of all things was causing the kernel panic. If you exclude git, then you >> get a successful boot. >> >> That is just *weird*. I don't have the time to figure out why this is, >> but I hope that this helps you. >> >> John >> >> >> Finally, upon inserting the sdcard into my wandboard, I boot it up and >> view the output through serial. The boot fails with a "Kernel panic - not >> syncing: No init found.". >> >> Here is the log of the first boot: http://pastebin.com/gr8LpMRU >> And here is the log of when the board is reset: >> http://pastebin.com/eauuw3Q2 >> >> Does anyone have any idea why this is happening and how I can fix it? >> >> Thank you! >> >> >> _______________________________________________ >> meta-freescale mailing listmeta-freescale@yoctoproject.orghttps://lists.yoctoproject.org/listinfo/meta-freescale >> >> >> >> _______________________________________________ >> meta-freescale mailing list >> meta-freescale@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/meta-freescale >> >> > --089e016814cc5e95b204f090e7c5 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable

All,

John's solution worked marvelo= usly.

The wiki page has been updated for anyone el= se in my situation. =A0If anyone encounters the same error, simply don'= t include git in the install_appends.

Thanks John!

On Tue, Jan 21, 2014 at 5:06 PM, Jay Cady <= jcady92@gmail.com> wrote:

Hey John,

Wow, that is really surprising. =A0I will give that build a try tonight a= nd see my results.

Do I exclude git by writing the line "DISTRO_FEATU= RES_remove =3D "git"" in my local.conf?

If this solves it, you will be my hero.

<= /div>
Thanks!
= Jay
On Tue, Jan 21, 2014 at 4:57 PM, John We= ber <rjohnweber@gmail.com> wrote:
=20 =20 =20
Hi Jay,

On 1/19/14 3:21 PM, Jay Cady wrote:

Hi,

I'm trying to integrate Qt5 with Yocto on the Wandboard Dual (i.MX6). =A0I've been following these two tutorials:

http://wiki.wandboard.org/index= .php/Getting_started_with_Yocto_on_Wandboard

http://wiki.wandboard.org/index.p= hp/Building_Qt5_using_yocto_on_Wandboard

The problem occurs when I am ready to bitbake the meta-qt5 recipe into the core-image-minimal. =A0I add the recommended features to the local.conf and remove the x11 and wayland components in order to get the eglfs drivers. =A0Then I bitbake core-image-minimal, the bitbake succeeds fine. =A0I then run a dd command to write the core-image-minimal-wandboard-dual.sdcard to my sdcard.

I was curious so I tried replicating those steps and was able to get it to fail on my Wandboard Dual immediately.

There are a LOT of packages added to the image, so I figured that one of them was somehow causing the problem.=A0 I started binary searching.=A0 After 9 iterations of including/excluding packages from the build, I found that GIT of all things was causing the kernel panic.=A0 If you exclude git, then you get a successful boot.

That is just weird.=A0 I don't have the time to figure out w= hy this is, but I hope that this helps you.

John
Finally, upon inserting the sdcard into my wandboard, I boot it up and view the output through serial. =A0The boot fails with a "Kernel panic - not syncing: No init found.".

Here is the log of the first boot: http://pastebin.com/gr8LpMRU

And here is the log of when the board is reset:=A0http://pastebin.com/eauuw3Q2=

Does anyone have any idea why this is happening and how I can fix it?

Thank you!
_______________________________________________
meta-freescale mailing list
meta-f=
reescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale
_______________________________________________
meta-freescale mailing list
meta-f= reescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale

--089e016814cc5e95b204f090e7c5-- From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-ob0-f177.google.com (mail-ob0-f177.google.com [209.85.214.177]) by yocto-www.yoctoproject.org (Postfix) with ESMTP id EDA75E00819 for ; Wed, 22 Jan 2014 07:39:16 -0800 (PST) Received: by mail-ob0-f177.google.com with SMTP id wp18so586939obc.22 for ; Wed, 22 Jan 2014 07:39:16 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:sender:in-reply-to:references:date:message-id:subject :from:to:cc:content-type; bh=fItwYhwz6ePS3MKMQKHLspf3ZEY66UuiYKoulifPXuc=; b=YWMdacLGV4kvEhJl25JWIntDUFT7grzftAur6e8BRmd37/I3VFG6p/GwJDxhRTx9e7 xVsUM9CTWkRAZNVarXkKMosLVkx5p7p1DJgYl4PoMYRwL8/Z9WLWIEgwPz2Z1+xf5sm4 lFr5Z+tCi/PxLIwJhYjDEhdqNcZjaf17v3pA+RF24F+Xx8cAuFMJG63nTBkX7apD4cfo gL6pBdwmqtnV8Nc6pajxiA3D8W7NlZqvuR+dFcyNIjlXkRGcCUy9lZnHlVFVxxKPbaTh ocgAnHjG7HLI/BvzVhixtgCgNOanbjaY7rlIfBHBazZKlFEag/0jMAtjLs3gZvOOLmFt WzjA== MIME-Version: 1.0 X-Received: by 10.60.63.102 with SMTP id f6mr976667oes.76.1390405155902; Wed, 22 Jan 2014 07:39:15 -0800 (PST) Sender: otavio.salvador@gmail.com Received: by 10.182.232.166 with HTTP; Wed, 22 Jan 2014 07:39:15 -0800 (PST) In-Reply-To: References: <52DEED5C.6070401@gmail.com>

Date: Wed, 22 Jan 2014 13:39:15 -0200 X-Google-Sender-Auth: y8XLIOWGxqUkDqWqeV6lEt0wFFk Message-ID: From: Otavio Salvador To: Jay Cady Cc: "meta-freescale@yoctoproject.org" Subject: Re: Yocto Qt5 Integration for Wandboard - Kernel Panic X-BeenThere: meta-freescale@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Usage and development list for the meta-fsl-* layers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 22 Jan 2014 15:39:17 -0000 Content-Type: text/plain; charset=ISO-8859-1 On Wed, Jan 22, 2014 at 1:37 PM, Jay Cady wrote: > All, > > John's solution worked marvelously. > > The wiki page has been updated for anyone else in my situation. If anyone > encounters the same error, simply don't include git in the install_appends. Oh man, I'd like to understand WHY! -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750