[PATCH 1/2] at91: gpio: use gpiolib API to mark a GPIO used as an IRQ

[gregory.clement@free-electrons.com (Gregory CLEMENT)]

Hi Jean-Jacques,

On 22/01/2014 13:39, Jean-Jacques Hiblot wrote:
> When an IRQ is started on a GPIO line, mark this GPIO as IRQ in
> the gpiolib so we can keep track of the usage centrally.
> 
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
> ---
>  arch/arm/mach-at91/gpio.c | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
> index a5afcf7..6176b4b 100644
> --- a/arch/arm/mach-at91/gpio.c
> +++ b/arch/arm/mach-at91/gpio.c
> @@ -577,8 +577,32 @@ static int alt_gpio_irq_type(struct irq_data *d, unsigned type)
>  	return 0;
>  }
>  
> +static unsigned int gpio_irq_startup(struct irq_data *d)
> +{
> +	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
> +	unsigned	pin = d->hwirq;
> +	int ret;
> +
> +	ret = gpio_lock_as_irq(&at91_gpio->chip, pin);
> +	if (ret) {
> +		dev_err(at91_gpio->chip.dev, "unable to lock pind %lu IRQ\n",
> +			d->hwirq);
> +		return ret;
> +	}
> +	return 0;
> +}

Nitpick: a blank line should be nice here between the 2 functions

> +static void gpio_irq_shutdown(struct irq_data *d)
> +{
> +	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
> +	unsigned	pin = d->hwirq;
> +
> +	gpio_unlock_as_irq(&at91_gpio->chip, pin);
> +}
> +
>  static struct irq_chip gpio_irqchip = {
>  	.name		= "GPIO",
> +	.irq_shutdown	= gpio_irq_shutdown,
> +	.irq_startup	= gpio_irq_startup,
>  	.irq_disable	= gpio_irq_mask,
>  	.irq_mask	= gpio_irq_mask,
>  	.irq_unmask	= gpio_irq_unmask,
> 

Thanks,

Gregory


-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com