From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mathias Gerber Date: Wed, 22 Jan 2014 19:32:31 +0000 Subject: Re: [lm-sensors] Asus H87-PRO /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Message-Id: <52E01CCF.7010705@tuxedo.ath.cx> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello Guenter On 22.01.2014 19:34, Guenter Roeck wrote: >>> Interesting. Obviously that doesn't help ;-). What is returned >>> back if you read pwm2 after setting it to 0 ? >> 0 (zero). Maybe some sort of protection? > No idea. Might be the fan itself doing it. Unlikely. The same fan model is installed on my other main-board (Gigabyte with it8728) and its possible there to bring down the fan to 0 rpm with pwm set to 0. > What happens if you set it to 1 ? Set to [0-4] => fan spins up to maximum rpm (~2250rpm) Set to > 5 => fan spins at desired rpm (~600rpm upward) > Excellent. Note there is one problem in the driver - any changed > pwm settings will revert to the default after a suspend/resume > cycle. That requires a major change to the driver to fix, so it > will take a while. Until then, you'll have to re-apply the changed > configuration after suspend/resume. No problem for me. This box runs all the time with no suspend mode anyway :-) - -- kind regards Mathias -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlLgHM8ACgkQnfTEjDUZ2fPDWwCgmX5ztf4MPGbchLRGlZL56q17 6xUAn3ZZnpOJOpbB8hAGi4PQZdX3Py3y =EYT1 -----END PGP SIGNATURE----- _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors