From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dave Land Subject: Re: [C8000] serial console drops input Date: Sat, 25 Jan 2014 18:01:29 -0700 Message-ID: <52E45E69.5000900@landcomp.net> References: <20140125054144.4ccfde5e@marga.jer-c2.orkz.net> <1417398.fmUESL4Ngr@eto> <7905648.nun1s37FKj@eto> <20140125181348.67a2bf8f@marga.jer-c2.orkz.net> <20140126010218.33334dbd@marga.jer-c2.orkz.net> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Cc: John David Anglin , Rolf Eike Beer To: Jeroen Roovers , linux-parisc@vger.kernel.org Return-path: In-Reply-To: <20140126010218.33334dbd@marga.jer-c2.orkz.net> List-ID: List-Id: linux-parisc.vger.kernel.org On 1/25/14 5:02 PM, Jeroen Roovers wrote: > On Sat, 25 Jan 2014 15:13:47 -0500 > John David Anglin wrote: > >> Helge has made some changes to palo but I believe that we are on the >> PDC boot >> console (ttyB0) until switch over here: > > This. > >> How long is your cable? There's no shield connection on DB9 >> connector. You just >> need to cross transmit and receive data. Signal ground is straight >> through. >> >> Dave L is correct about USB keyboard and mouse confusing serial >> console support. > > Yes, but _all_ of that is entirely immaterial as the same hardware > worked fine for more than one and a half years, _until_ the changes to > palo/PDC console support were introduced. Ahh, I missed that part... :-P I think I set mine up after this was introduced. Dave L. > > I could easily revert the IPL to the former working version (1.18) and > see if that fixes the issue during boot. I'll report back with some > results. > -- > To unsubscribe from this list: send the line "unsubscribe linux-parisc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- Dave Land Land Computer Service xmechanic@landcomp.net ICQ: 676030523