From: Jaehoon Chung <jh80.chung@samsung.com>
To: "linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>
Cc: 'Chris Ball' <cjb@laptop.org>, Olof Johansson <olof@lixom.net>,
Seungwon Jeon <tgih.jun@samsung.com>
Subject: [PATCH v2 2/8] mmc: dw_mmc: use the mmc_of_parse() instead of local parser
Date: Tue, 28 Jan 2014 17:24:53 +0900 [thread overview]
Message-ID: <52E76955.2030701@samsung.com> (raw)
mmc_of_parse() have been already parsed the general capability.
Didn't need to use the local parser.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
---
Changelog V2:
- None
drivers/mmc/core/host.c | 4 ++--
drivers/mmc/host/dw_mmc.c | 49 +--------------------------------------------
2 files changed, 3 insertions(+), 50 deletions(-)
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 5a82e81..4b81c93 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -429,9 +429,9 @@ int mmc_of_parse(struct mmc_host *host)
host->pm_caps |= MMC_PM_KEEP_POWER;
if (of_find_property(np, "enable-sdio-wakeup", &len))
host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
- if (of_find_property(np, "mmc-hs200-1_8v", NULL))
+ if (of_find_property(np, "mmc-hs200-1_8v", &len))
host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
- if (of_find_property(np, "mmc-hs200-1_2v", NULL))
+ if (of_find_property(np, "mmc-hs200-1_2v", &len))
host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
return 0;
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 55cd110..8193e21 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2046,21 +2046,6 @@ static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
return quirks;
}
-/* find out bus-width for a given slot */
-static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot)
-{
- struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
- u32 bus_wd = 1;
-
- if (!np)
- return 1;
-
- if (of_property_read_u32(np, "bus-width", &bus_wd))
- dev_err(dev, "bus-width property not found, assuming width"
- " as 1\n");
- return bus_wd;
-}
-
/* find the write protect gpio for a given slot; or -1 if none specified */
static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot)
{
@@ -2108,10 +2093,6 @@ static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
{
return 0;
}
-static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot)
-{
- return 1;
-}
static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
{
return NULL;
@@ -2134,7 +2115,6 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
const struct dw_mci_drv_data *drv_data = host->drv_data;
int ctrl_id, ret;
u32 freq[2];
- u8 bus_width;
mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
if (!mmc)
@@ -2189,19 +2169,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
if (host->pdata->caps2)
mmc->caps2 = host->pdata->caps2;
- if (host->pdata->get_bus_wd)
- bus_width = host->pdata->get_bus_wd(slot->id);
- else if (host->dev->of_node)
- bus_width = dw_mci_of_get_bus_wd(host->dev, slot->id);
- else
- bus_width = 1;
-
- switch (bus_width) {
- case 8:
- mmc->caps |= MMC_CAP_8_BIT_DATA;
- case 4:
- mmc->caps |= MMC_CAP_4_BIT_DATA;
- }
+ mmc_of_parse(mmc);
if (host->pdata->blk_settings) {
mmc->max_segs = host->pdata->blk_settings->max_segs;
@@ -2399,24 +2367,9 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
return ERR_PTR(ret);
}
- if (of_find_property(np, "keep-power-in-suspend", NULL))
- pdata->pm_caps |= MMC_PM_KEEP_POWER;
-
- if (of_find_property(np, "enable-sdio-wakeup", NULL))
- pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
-
if (of_find_property(np, "supports-highspeed", NULL))
pdata->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
- if (of_find_property(np, "caps2-mmc-hs200-1_8v", NULL))
- pdata->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
-
- if (of_find_property(np, "caps2-mmc-hs200-1_2v", NULL))
- pdata->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
-
- if (of_get_property(np, "cd-inverted", NULL))
- pdata->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
-
return pdata;
}
--
1.7.9.5
next reply other threads:[~2014-01-28 8:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-28 8:24 Jaehoon Chung [this message]
2014-01-28 12:53 ` [PATCH v2 2/8] mmc: dw_mmc: use the mmc_of_parse() instead of local parser Seungwon Jeon
2014-01-28 23:47 ` Jaehoon Chung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52E76955.2030701@samsung.com \
--to=jh80.chung@samsung.com \
--cc=cjb@laptop.org \
--cc=linux-mmc@vger.kernel.org \
--cc=olof@lixom.net \
--cc=tgih.jun@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.