From: Ben Greear <greearb@candelatech.com>
To: ath10k <ath10k@lists.infradead.org>
Subject: ath10k crash on firmware crash.
Date: Tue, 28 Jan 2014 13:43:43 -0800 [thread overview]
Message-ID: <52E8248F.8090601@candelatech.com> (raw)
I don't think I've seen this one (or at least not recently).
...
Firmware had just crashed, then OS crashed:
ATH10K_DBG_BUFFER:
ath10k: [1] next: 0x4127f4 buf: 0x4106e4 sz: 1500 len: 0 count: 0 free: 0
ath10k: ctl_resp never came in (-110)
ath10k: failed to connect to HTC: -110
ath10k: could not init core (-110)
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffa0b355c1>] ath10k_ce_send+0x1d/0x15d [ath10k_pci]
PGD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: ath10k_pci ath10k_core ath5k ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 nf_nat_ipv4 ]
CPU: 1 PID: 36 Comm: kworker/1:1 Tainted: G WC 3.13.0-rc8-wl-ath+ #8
Hardware name: To be filled by O.E.M. To be filled by O.E.M./HURONRIVER, BIOS 4.6.5 05/02/2012
Workqueue: events ieee80211_restart_work [mac80211]
task: ffff880215b521c0 ti: ffff880215e18000 task.ti: ffff880215e18000
RIP: 0010:[<ffffffffa0b355c1>] [<ffffffffa0b355c1>] ath10k_ce_send+0x1d/0x15d [ath10k_pci]
RSP: 0018:ffff880215e19af8 EFLAGS: 00010292
RAX: ffff880215e19b10 RBX: 0000000000000000 RCX: 0000000000000018
RDX: 00000000d9ccf800 RSI: ffff8800c965ad00 RDI: 0000000000000000
RBP: ffff880215e19b58 R08: 0000000000000002 R09: 0000000000000000
R10: ffffffff812e1a23 R11: 0000000000000292 R12: 0000000000000018
R13: 0000000000000000 R14: 0000000000000002 R15: ffff88021562d700
FS: 0000000000000000(0000) GS:ffff88021fa80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000001a0d000 CR4: 00000000000407e0
Stack:
d9ccf8000d47df40 ffffffffa0b367a0 ffff880215e19b10 0000000000000010
ffff880215e19b68 ffff880215e19b28 0000000000000018 ffff8800c965ad00
0000000000000018 0000000000000000 0000000000000002 ffff88021562d700
Call Trace:
[<ffffffffa0b3251d>] ath10k_pci_hif_send_head+0xa7/0xcb [ath10k_pci]
[<ffffffffa0b16cbe>] ath10k_htc_send+0x23d/0x2d0 [ath10k_core]
[<ffffffffa0b1a169>] ath10k_wmi_cmd_send_nowait+0x5d/0x85 [ath10k_core]
[<ffffffffa0b1aaef>] ath10k_wmi_cmd_send+0x62/0x115 [ath10k_core]
[<ffffffff814e8abd>] ? __netdev_alloc_skb+0x4b/0x9b
[<ffffffffa0b1c438>] ath10k_wmi_vdev_set_param+0x91/0xa3 [ath10k_core]
[<ffffffffa0b0e0d5>] ath10k_mac_set_rts+0x3e/0x40 [ath10k_core]
[<ffffffffa0b0e1d0>] ath10k_set_frag_threshold+0x5e/0x9c [ath10k_core]
[<ffffffffa09d60eb>] ieee80211_reconfig+0x12a/0x7b3 [mac80211]
[<ffffffff815a8069>] ? mutex_unlock+0x9/0xb
[<ffffffffa09b3a40>] ieee80211_restart_work+0x5e/0x68 [mac80211]
[<ffffffff810c01d0>] process_one_work+0x1d7/0x2fc
[<ffffffff810c0166>] ? process_one_work+0x16d/0x2fc
[<ffffffff810c06c8>] worker_thread+0x12e/0x1fb
[<ffffffff810c059a>] ? rescuer_thread+0x27b/0x27b
[<ffffffff810c5aee>] kthread+0xb5/0xbd
[<ffffffff815a9220>] ? _raw_spin_unlock_irq+0x28/0x42
[<ffffffff810c5a39>] ? __kthread_parkme+0x5c/0x5c
[<ffffffff815ae04c>] ret_from_fork+0x7c/0xb0
[<ffffffff810c5a39>] ? __kthread_parkme+0x5c/0x5c
Code: df ff d0 48 83 c4 18 5b 41 5c 41 5d 5d c3 55 48 89 e5 41 57 41 56 45 89 c6 41 55 41 54 41 89 cc 53 48 89
RIP [<ffffffffa0b355c1>] ath10k_ce_send+0x1d/0x15d [ath10k_pci]
RSP <ffff880215e19af8>
CR2: 0000000000000000
---[ end trace 0ff0538694d604c2 ]---
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2014-01-28 21:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-28 21:43 Ben Greear [this message]
2014-01-29 6:26 ` [PATCH] ath10k: properly return err from start() Michal Kazior
2014-01-29 6:26 ` Michal Kazior
2014-01-30 8:10 ` Kalle Valo
2014-01-30 8:10 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52E8248F.8090601@candelatech.com \
--to=greearb@candelatech.com \
--cc=ath10k@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.