Re: BeagleBone Black - linux-ti-staging and kernel modesetting

[Jonathan Liu <net147@gmail.com>]

Hi Denys,

On 30/01/2014 8:46 AM, Denys Dmytriyenko wrote:
> Jonathan,
>
> Here's the reply from our DRM guy:
>
>> It should work, it looks to me like it is failing to probe for the tda998x
>> which is why the DRM driver is reporting no connectors/encoders.  They will
>> also need to make some changes to the DTS to get the thing to probe.  This
>> document has the necessary DT entries - refer to the DRM section - (it
>> wasn't there for the last 3.12 release so not an RTFM message).
>> http://processors.wiki.ti.com/index.php/Linux_Core_LCD_Controller_User_Guide#AM335x_LCDC_Display_Driver_.28fbdev.29
>>
>> Darren
On the wiki page, should "pinctrl-0 = <&nxp_hdmi_pin_mux>;" be 
"pinctrl-0 = <&nxp_hdmi_bonelt_pins>;" as indicated by
https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/tree/Documentation/devicetree/bindings/drm/tilcdc/slave.txt?id=refs/tags/v3.12.8
?

Regards,
Jonathan

>>
>>> Date: Thu, 30 Jan 2014 00:08:56 +1100
>>> From: Jonathan Liu <net147@gmail.com>
>>> To: meta-ti@yoctoproject.org
>>> Subject: [meta-ti] BeagleBone Black - linux-ti-staging and kernel modesetting
>>>
>>> Hi,
>>>
>>> I am using Yocto dora release with latest meta-ti git compiling for
>>> BeagleBone Black using systemd.
>>> For systemd to boot I had created linux-ti-staging_3.12.bbappend with
>>> do_configure_append() that
>>> appends the following options to kernel config:
>>> CONFIG_CGROUPS=y
>>> CONFIG_FHANDLE=y
>>>
>>> More kernel options to enable additional support for systemd can be
>>> found at: http://cgit.freedesktop.org/systemd/systemd/tree/README
>>>
>>> I have also added the following for graphics support:
>>> CONFIG_DRM=y
>>> CONFIG_DRM_KMS_HELPER=y
>>> CONFIG_DRM_GEM_CMA_HELPER=y
>>> CONFIG_DRM_KMS_CMA_HELPER=y
>>> CONFIG_DRM_I2C_NXP_TDA998X=y
>>> CONFIG_DRM_TILCDC=y
>>>
>>> The kernel mode switching (using xf86-video-modesetting) with HDMI
>>> output however is not working.
>>>
>>> The kernel log shows:
>>> tilcdc 4830e000.lcdc: no encoders/connectors found
>>> tilcdc 4830e000.lcdc: failed to initialize mode setting
>>>
>>> The expected result (from Arch Linux ARM) is:
>>> tilcdc 4830e000.fb: found TDA19988
>>> tilcdc 4830e000.fb: fb0:  frame buffer device
>>> tilcdc 4830e000.fb: registered panic notifier
>>> [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
>>>
>>> /sys/class/drm/card0/card0-HDMI-A-1 doesn't exist also.
>>> What am I missing to get KMS working with meta-ti linux-ti-staging for
>>> the BeagleBone Black?
>>>
>>> Regards,
>>> Jonathan
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti