* [U-Boot] [PATCH 2/4] blackfin: add spi and i2c specific get clock functions
2014-01-28 5:53 [U-Boot] [PATCH 1/4] blackfin: the sclk MHz in i2c driver should be divided by 1000 other than 1024 Sonic Zhang
@ 2014-01-28 5:53 ` Sonic Zhang
2014-01-30 5:27 ` Heiko Schocher
2014-01-28 5:53 ` [U-Boot] [PATCH 3/4] blackfin: rename bfin-twi_i2c driver to adi_i2c Sonic Zhang
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Sonic Zhang @ 2014-01-28 5:53 UTC (permalink / raw)
To: u-boot
From: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
---
arch/blackfin/include/asm/blackfin_local.h | 7 -------
arch/blackfin/include/asm/clock.h | 11 +++++++++++
drivers/i2c/bfin-twi_i2c.c | 3 ++-
drivers/spi/bfin_spi.c | 7 ++++---
drivers/spi/bfin_spi6xx.c | 7 ++++---
5 files changed, 21 insertions(+), 14 deletions(-)
diff --git a/arch/blackfin/include/asm/blackfin_local.h b/arch/blackfin/include/asm/blackfin_local.h
index 4d6eeab..868c82e 100644
--- a/arch/blackfin/include/asm/blackfin_local.h
+++ b/arch/blackfin/include/asm/blackfin_local.h
@@ -42,13 +42,6 @@
# include <linux/types.h>
-extern u_long get_vco(void);
-extern u_long get_cclk(void);
-extern u_long get_sclk(void);
-extern u_long get_sclk0(void);
-extern u_long get_sclk1(void);
-extern u_long get_dclk(void);
-
# define bfin_revid() (bfin_read_CHIPID() >> 28)
extern int bfin_os_log_check(void);
diff --git a/arch/blackfin/include/asm/clock.h b/arch/blackfin/include/asm/clock.h
index fc84fe4..59d3faa 100644
--- a/arch/blackfin/include/asm/clock.h
+++ b/arch/blackfin/include/asm/clock.h
@@ -68,10 +68,21 @@ static inline uint32_t early_get_uart_clk(void)
return uclk;
}
+extern u_long get_vco(void);
+extern u_long get_cclk(void);
+extern u_long get_sclk(void);
+
#ifdef CGU_DIV
+extern u_long get_sclk0(void);
+extern u_long get_sclk1(void);
+extern u_long get_dclk(void);
# define get_uart_clk get_sclk0
+# define get_i2c_clk get_sclk0
+# define get_spi_clk get_sclk0
#else
# define get_uart_clk get_sclk
+# define get_i2c_clk get_sclk
+# define get_spi_clk get_sclk
#endif
#endif
diff --git a/drivers/i2c/bfin-twi_i2c.c b/drivers/i2c/bfin-twi_i2c.c
index 5c37280..cfab064 100644
--- a/drivers/i2c/bfin-twi_i2c.c
+++ b/drivers/i2c/bfin-twi_i2c.c
@@ -10,6 +10,7 @@
#include <i2c.h>
#include <asm/blackfin.h>
+#include <asm/clock.h>
#include <asm/mach-common/bits/twi.h>
/* Every register is 32bit aligned, but only 16bits in size */
@@ -274,7 +275,7 @@ unsigned int i2c_get_bus_speed(void)
*/
void i2c_init(int speed, int slaveaddr)
{
- uint8_t prescale = ((get_sclk() / 1000 / 1000 + 5) / 10) & 0x7F;
+ uint8_t prescale = ((get_i2c_clk() / 1000 / 1000 + 5) / 10) & 0x7F;
/* Set TWI internal clock as 10MHz */
twi->control = prescale;
diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c
index aa89d89..71a31d0 100644
--- a/drivers/spi/bfin_spi.c
+++ b/drivers/spi/bfin_spi.c
@@ -13,6 +13,7 @@
#include <spi.h>
#include <asm/blackfin.h>
+#include <asm/clock.h>
#include <asm/gpio.h>
#include <asm/portmux.h>
#include <asm/mach-common/bits/spi.h>
@@ -140,12 +141,12 @@ static const unsigned short cs_pins[][7] = {
void spi_set_speed(struct spi_slave *slave, uint hz)
{
struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
- ulong sclk;
+ ulong clk;
u32 baud;
- sclk = get_sclk();
+ clk = get_spi_clk();
/* baud should be rounded up */
- baud = DIV_ROUND_UP(sclk, 2 * hz);
+ baud = DIV_ROUND_UP(clk, 2 * hz);
if (baud < 2)
baud = 2;
else if (baud > (u16)-1)
diff --git a/drivers/spi/bfin_spi6xx.c b/drivers/spi/bfin_spi6xx.c
index 07b833d..eba01d1 100644
--- a/drivers/spi/bfin_spi6xx.c
+++ b/drivers/spi/bfin_spi6xx.c
@@ -22,6 +22,7 @@
#include <spi.h>
#include <asm/blackfin.h>
+#include <asm/clock.h>
#include <asm/gpio.h>
#include <asm/portmux.h>
#include <asm/mach-common/bits/spi6xx.h>
@@ -135,11 +136,11 @@ static const unsigned short cs_pins[][7] = {
void spi_set_speed(struct spi_slave *slave, uint hz)
{
struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
- ulong sclk;
+ ulong clk;
u32 clock;
- sclk = get_sclk1();
- clock = sclk / hz;
+ clk = get_spi_clk();
+ clock = clk / hz;
if (clock)
clock--;
bss->clock = clock;
--
1.8.2.3
^ permalink raw reply related [flat|nested] 8+ messages in thread* [U-Boot] [PATCH 3/4] blackfin: rename bfin-twi_i2c driver to adi_i2c
2014-01-28 5:53 [U-Boot] [PATCH 1/4] blackfin: the sclk MHz in i2c driver should be divided by 1000 other than 1024 Sonic Zhang
2014-01-28 5:53 ` [U-Boot] [PATCH 2/4] blackfin: add spi and i2c specific get clock functions Sonic Zhang
@ 2014-01-28 5:53 ` Sonic Zhang
2014-01-30 5:28 ` Heiko Schocher
2014-01-28 5:53 ` [U-Boot] [PATCH 4/4] blackfin: make i2c driver blackfin independant Sonic Zhang
2014-01-30 5:27 ` [U-Boot] [PATCH 1/4] blackfin: the sclk MHz in i2c driver should be divided by 1000 other than 1024 Heiko Schocher
3 siblings, 1 reply; 8+ messages in thread
From: Sonic Zhang @ 2014-01-28 5:53 UTC (permalink / raw)
To: u-boot
From: Sonic Zhang <sonic.zhang@analog.com>
The ADI twi peripheral is not binding to Blackfin processor only.
Change to a generic name.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
---
arch/blackfin/include/asm/twi.h | 15 +++++++++++++++
drivers/i2c/Makefile | 2 +-
drivers/i2c/{bfin-twi_i2c.c => adi_i2c.c} | 3 +--
include/configs/bct-brettl2.h | 2 +-
include/configs/bf518f-ezbrd.h | 2 +-
include/configs/bf526-ezbrd.h | 2 +-
include/configs/bf527-ad7160-eval.h | 2 +-
include/configs/bf527-ezkit.h | 2 +-
include/configs/bf527-sdp.h | 2 +-
include/configs/bf537-minotaur.h | 2 +-
include/configs/bf537-pnav.h | 2 +-
include/configs/bf537-srv1.h | 2 +-
include/configs/bf537-stamp.h | 2 +-
include/configs/bf538f-ezkit.h | 2 +-
include/configs/bf548-ezkit.h | 2 +-
include/configs/bf609-ezkit.h | 2 +-
include/configs/br4.h | 2 +-
include/configs/cm-bf527.h | 2 +-
include/configs/cm-bf537e.h | 2 +-
include/configs/cm-bf537u.h | 2 +-
include/configs/cm-bf548.h | 2 +-
include/configs/pr1.h | 2 +-
include/configs/tcm-bf518.h | 2 +-
include/configs/tcm-bf537.h | 2 +-
24 files changed, 38 insertions(+), 24 deletions(-)
create mode 100644 arch/blackfin/include/asm/twi.h
rename drivers/i2c/{bfin-twi_i2c.c => adi_i2c.c} (99%)
diff --git a/arch/blackfin/include/asm/twi.h b/arch/blackfin/include/asm/twi.h
new file mode 100644
index 0000000..922cdbd
--- /dev/null
+++ b/arch/blackfin/include/asm/twi.h
@@ -0,0 +1,15 @@
+/*
+ * i2c.c - driver for Blackfin on-chip TWI/I2C
+ *
+ * Copyright (c) 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ARCH_TWI_H
+#define __ARCH_TWI_H
+
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/twi.h>
+
+#endif
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index fa3a875..4bf4d2e 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -5,7 +5,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o
+obj-$(CONFIG_ADI_I2C) += adi_i2c.o
obj-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o
obj-$(CONFIG_DW_I2C) += designware_i2c.o
obj-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
diff --git a/drivers/i2c/bfin-twi_i2c.c b/drivers/i2c/adi_i2c.c
similarity index 99%
rename from drivers/i2c/bfin-twi_i2c.c
rename to drivers/i2c/adi_i2c.c
index cfab064..743aa25 100644
--- a/drivers/i2c/bfin-twi_i2c.c
+++ b/drivers/i2c/adi_i2c.c
@@ -9,9 +9,8 @@
#include <common.h>
#include <i2c.h>
-#include <asm/blackfin.h>
#include <asm/clock.h>
-#include <asm/mach-common/bits/twi.h>
+#include <asm/twi.h>
/* Every register is 32bit aligned, but only 16bits in size */
#define ureg(name) u16 name; u16 __pad_##name;
diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h
index 5b09b45..93a713b 100644
--- a/include/configs/bct-brettl2.h
+++ b/include/configs/bct-brettl2.h
@@ -121,7 +121,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h
index a97972b..4b94ba5 100644
--- a/include/configs/bf518f-ezbrd.h
+++ b/include/configs/bf518f-ezbrd.h
@@ -134,7 +134,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h
index 0031093..54f26f4 100644
--- a/include/configs/bf526-ezbrd.h
+++ b/include/configs/bf526-ezbrd.h
@@ -131,7 +131,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h
index fa05103..ca6b0d5 100644
--- a/include/configs/bf527-ad7160-eval.h
+++ b/include/configs/bf527-ad7160-eval.h
@@ -119,7 +119,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h
index db1b613..7ec5b02 100644
--- a/include/configs/bf527-ezkit.h
+++ b/include/configs/bf527-ezkit.h
@@ -134,7 +134,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
diff --git a/include/configs/bf527-sdp.h b/include/configs/bf527-sdp.h
index c0e8b5a..96629d4 100644
--- a/include/configs/bf527-sdp.h
+++ b/include/configs/bf527-sdp.h
@@ -103,7 +103,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h
index 156eeab..2b2f79c 100644
--- a/include/configs/bf537-minotaur.h
+++ b/include/configs/bf537-minotaur.h
@@ -120,7 +120,7 @@
/*
* I2C settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
#define CONFIG_SYS_I2C_SPEED 50000
#define CONFIG_SYS_I2C_SLAVE 0
diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h
index 3aa3d50..c81572c 100644
--- a/include/configs/bf537-pnav.h
+++ b/include/configs/bf537-pnav.h
@@ -142,7 +142,7 @@
/*
* I2C settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h
index e12d761..08bc030 100644
--- a/include/configs/bf537-srv1.h
+++ b/include/configs/bf537-srv1.h
@@ -120,7 +120,7 @@
/*
* I2C settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
#define CONFIG_SYS_I2C_SPEED 50000
#define CONFIG_SYS_I2C_SLAVE 0
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 02945be..f32359a 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -128,7 +128,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h
index ffb0caf..e0bcd40 100644
--- a/include/configs/bf538f-ezkit.h
+++ b/include/configs/bf538f-ezkit.h
@@ -125,7 +125,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h
index da5f029..c54d2fa 100644
--- a/include/configs/bf548-ezkit.h
+++ b/include/configs/bf548-ezkit.h
@@ -134,7 +134,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h
index 1a43e1b..6156ddb 100644
--- a/include/configs/bf609-ezkit.h
+++ b/include/configs/bf609-ezkit.h
@@ -80,7 +80,7 @@
#define CONFIG_MII
/* i2c Settings */
-#define CONFIG_BFIN_TWI_I2C
+#define CONFIG_ADI_I2C
#define CONFIG_HARD_I2C
/*
diff --git a/include/configs/br4.h b/include/configs/br4.h
index ef3752d..f220eb5 100644
--- a/include/configs/br4.h
+++ b/include/configs/br4.h
@@ -102,7 +102,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C
+#define CONFIG_ADI_I2C
#define CONFIG_HARD_I2C
diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h
index b15a1eb..c4f2f1f 100644
--- a/include/configs/cm-bf527.h
+++ b/include/configs/cm-bf527.h
@@ -113,7 +113,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h
index 2838012..de839c4 100644
--- a/include/configs/cm-bf537e.h
+++ b/include/configs/cm-bf537e.h
@@ -122,7 +122,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h
index da4cc67..9d65e7b 100644
--- a/include/configs/cm-bf537u.h
+++ b/include/configs/cm-bf537u.h
@@ -120,7 +120,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h
index 7f27eda..7c9d1cd 100644
--- a/include/configs/cm-bf548.h
+++ b/include/configs/cm-bf548.h
@@ -104,7 +104,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
diff --git a/include/configs/pr1.h b/include/configs/pr1.h
index 03d4269..37f3fab 100644
--- a/include/configs/pr1.h
+++ b/include/configs/pr1.h
@@ -102,7 +102,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C
+#define CONFIG_ADI_I2C
#define CONFIG_HARD_I2C
diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h
index 241f210..8d835b4 100644
--- a/include/configs/tcm-bf518.h
+++ b/include/configs/tcm-bf518.h
@@ -103,7 +103,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h
index 58bcdc8..7d1ee77 100644
--- a/include/configs/tcm-bf537.h
+++ b/include/configs/tcm-bf537.h
@@ -122,7 +122,7 @@
/*
* I2C Settings
*/
-#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_ADI_I2C 1
#define CONFIG_HARD_I2C 1
--
1.8.2.3
^ permalink raw reply related [flat|nested] 8+ messages in thread* [U-Boot] [PATCH 4/4] blackfin: make i2c driver blackfin independant
2014-01-28 5:53 [U-Boot] [PATCH 1/4] blackfin: the sclk MHz in i2c driver should be divided by 1000 other than 1024 Sonic Zhang
2014-01-28 5:53 ` [U-Boot] [PATCH 2/4] blackfin: add spi and i2c specific get clock functions Sonic Zhang
2014-01-28 5:53 ` [U-Boot] [PATCH 3/4] blackfin: rename bfin-twi_i2c driver to adi_i2c Sonic Zhang
@ 2014-01-28 5:53 ` Sonic Zhang
2014-01-30 5:28 ` Heiko Schocher
2014-01-30 5:27 ` [U-Boot] [PATCH 1/4] blackfin: the sclk MHz in i2c driver should be divided by 1000 other than 1024 Heiko Schocher
3 siblings, 1 reply; 8+ messages in thread
From: Sonic Zhang @ 2014-01-28 5:53 UTC (permalink / raw)
To: u-boot
From: Scott Jiang <scott.jiang.linux@gmail.com>
The ADI twi peripheral is not binding to Blackfin processor only.
Access i2c registers by standard io functions.
Fix coding style.
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
---
drivers/i2c/adi_i2c.c | 151 ++++++++++++++++++++++++++------------------------
1 file changed, 80 insertions(+), 71 deletions(-)
diff --git a/drivers/i2c/adi_i2c.c b/drivers/i2c/adi_i2c.c
index 743aa25..675f417 100644
--- a/drivers/i2c/adi_i2c.c
+++ b/drivers/i2c/adi_i2c.c
@@ -1,7 +1,7 @@
/*
- * i2c.c - driver for Blackfin on-chip TWI/I2C
+ * i2c.c - driver for ADI TWI/I2C
*
- * Copyright (c) 2006-2010 Analog Devices Inc.
+ * Copyright (c) 2006-2013 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
@@ -11,6 +11,7 @@
#include <asm/clock.h>
#include <asm/twi.h>
+#include <asm/io.h>
/* Every register is 32bit aligned, but only 16bits in size */
#define ureg(name) u16 name; u16 __pad_##name;
@@ -39,7 +40,7 @@ struct twi_regs {
#ifdef TWI_CLKDIV
#define TWI0_CLKDIV TWI_CLKDIV
#endif
-static volatile struct twi_regs *twi = (void *)TWI0_CLKDIV;
+static struct twi_regs *twi = (void *)TWI0_CLKDIV;
#ifdef DEBUG
# define dmemset(s, c, n) memset(s, c, n)
@@ -93,53 +94,54 @@ struct i2c_msg {
*/
static int wait_for_completion(struct i2c_msg *msg)
{
- uint16_t int_stat;
+ u16 int_stat, ctl;
ulong timebase = get_timer(0);
do {
- int_stat = twi->int_stat;
+ int_stat = readw(&twi->int_stat);
if (int_stat & XMTSERV) {
debugi("processing XMTSERV");
- twi->int_stat = XMTSERV;
- SSYNC();
+ writew(XMTSERV, &twi->int_stat);
if (msg->alen) {
- twi->xmt_data8 = *(msg->abuf++);
+ writew(*(msg->abuf++), &twi->xmt_data8);
--msg->alen;
} else if (!(msg->flags & I2C_M_COMBO) && msg->len) {
- twi->xmt_data8 = *(msg->buf++);
+ writew(*(msg->buf++), &twi->xmt_data8);
--msg->len;
} else {
- twi->master_ctl |= (msg->flags & I2C_M_COMBO) ? RSTART | MDIR : STOP;
- SSYNC();
+ ctl = readw(&twi->master_ctl);
+ if (msg->flags & I2C_M_COMBO)
+ writew(ctl | RSTART | MDIR,
+ &twi->master_ctl);
+ else
+ writew(ctl | STOP, &twi->master_ctl);
}
}
if (int_stat & RCVSERV) {
debugi("processing RCVSERV");
- twi->int_stat = RCVSERV;
- SSYNC();
+ writew(RCVSERV, &twi->int_stat);
if (msg->len) {
- *(msg->buf++) = twi->rcv_data8;
+ *(msg->buf++) = readw(&twi->rcv_data8);
--msg->len;
} else if (msg->flags & I2C_M_STOP) {
- twi->master_ctl |= STOP;
- SSYNC();
+ ctl = readw(&twi->master_ctl);
+ writew(ctl | STOP, &twi->master_ctl);
}
}
if (int_stat & MERR) {
debugi("processing MERR");
- twi->int_stat = MERR;
- SSYNC();
+ writew(MERR, &twi->int_stat);
return msg->len;
}
if (int_stat & MCOMP) {
debugi("processing MCOMP");
- twi->int_stat = MCOMP;
- SSYNC();
+ writew(MCOMP, &twi->int_stat);
if (msg->flags & I2C_M_COMBO && msg->len) {
- twi->master_ctl = (twi->master_ctl & ~RSTART) |
+ ctl = readw(&twi->master_ctl);
+ ctl = (ctl & ~RSTART) |
(min(msg->len, 0xff) << 6) | MEN | MDIR;
- SSYNC();
+ writew(ctl, &twi->master_ctl);
} else
break;
}
@@ -160,8 +162,11 @@ static int wait_for_completion(struct i2c_msg *msg)
* Here we just get the i2c stuff all prepped and ready, and then tail off
* into wait_for_completion() for all the bits to go.
*/
-static int i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer, int len, u8 flags)
+static int i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer,
+ int len, u8 flags)
{
+ int ret;
+ u16 ctl;
uchar addr_buffer[] = {
(addr >> 0),
(addr >> 8),
@@ -174,62 +179,59 @@ static int i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer, int len,
.abuf = addr_buffer,
.alen = alen,
};
- int ret;
dmemset(buffer, 0xff, len);
- debugi("chip=0x%x addr=0x%02x alen=%i buf[0]=0x%02x len=%i flags=0x%02x[%s] ",
- chip, addr, alen, buffer[0], len, flags, (flags & I2C_M_READ ? "rd" : "wr"));
+ debugi("chip=0x%x addr=0x%02x alen=%i buf[0]=0x%02x len=%i ",
+ chip, addr, alen, buffer[0], len);
+ debugi("flags=0x%02x[%s] ", flags,
+ (flags & I2C_M_READ ? "rd" : "wr"));
/* wait for things to settle */
- while (twi->master_stat & BUSBUSY)
+ while (readw(&twi->master_stat) & BUSBUSY)
if (ctrlc())
return 1;
/* Set Transmit device address */
- twi->master_addr = chip;
+ writew(chip, &twi->master_addr);
/* Clear the FIFO before starting things */
- twi->fifo_ctl = XMTFLUSH | RCVFLUSH;
- SSYNC();
- twi->fifo_ctl = 0;
- SSYNC();
+ writew(XMTFLUSH | RCVFLUSH, &twi->fifo_ctl);
+ writew(0, &twi->fifo_ctl);
/* prime the pump */
if (msg.alen) {
len = (msg.flags & I2C_M_COMBO) ? msg.alen : msg.alen + len;
debugi("first byte=0x%02x", *msg.abuf);
- twi->xmt_data8 = *(msg.abuf++);
+ writew(*(msg.abuf++), &twi->xmt_data8);
--msg.alen;
} else if (!(msg.flags & I2C_M_READ) && msg.len) {
debugi("first byte=0x%02x", *msg.buf);
- twi->xmt_data8 = *(msg.buf++);
+ writew(*(msg.buf++), &twi->xmt_data8);
--msg.len;
}
/* clear int stat */
- twi->master_stat = -1;
- twi->int_stat = -1;
- twi->int_mask = 0;
- SSYNC();
+ writew(-1, &twi->master_stat);
+ writew(-1, &twi->int_stat);
+ writew(0, &twi->int_mask);
/* Master enable */
- twi->master_ctl =
- (twi->master_ctl & FAST) |
- (min(len, 0xff) << 6) | MEN |
- ((msg.flags & I2C_M_READ) ? MDIR : 0);
- SSYNC();
- debugi("CTL=0x%04x", twi->master_ctl);
+ ctl = readw(&twi->master_ctl);
+ ctl = (ctl & FAST) | (min(len, 0xff) << 6) | MEN |
+ ((msg.flags & I2C_M_READ) ? MDIR : 0);
+ writew(ctl, &twi->master_ctl);
/* process the rest */
ret = wait_for_completion(&msg);
debugi("ret=%d", ret);
if (ret) {
- twi->master_ctl &= ~MEN;
- twi->control &= ~TWI_ENA;
- SSYNC();
- twi->control |= TWI_ENA;
- SSYNC();
+ ctl = readw(&twi->master_ctl) & ~MEN;
+ writew(ctl, &twi->master_ctl);
+ ctl = readw(&twi->control) & ~TWI_ENA;
+ writew(ctl, &twi->control);
+ ctl = readw(&twi->control) | TWI_ENA;
+ writew(ctl, &twi->control);
}
return ret;
@@ -246,10 +248,11 @@ int i2c_set_bus_speed(unsigned int speed)
/* Set TWI interface clock */
if (clkdiv < I2C_DUTY_MAX || clkdiv > I2C_DUTY_MIN)
return -1;
- twi->clkdiv = (clkdiv << 8) | (clkdiv & 0xff);
+ clkdiv = (clkdiv << 8) | (clkdiv & 0xff);
+ writew(clkdiv, &twi->clkdiv);
/* Don't turn it on */
- twi->master_ctl = (speed > 100000 ? FAST : 0);
+ writew(speed > 100000 ? FAST : 0, &twi->master_ctl);
return 0;
}
@@ -260,8 +263,9 @@ int i2c_set_bus_speed(unsigned int speed)
*/
unsigned int i2c_get_bus_speed(void)
{
+ u16 clkdiv = readw(&twi->clkdiv) & 0xff;
/* 10 MHz / (2 * CLKDIV) -> 5 MHz / CLKDIV */
- return 5000000 / (twi->clkdiv & 0xff);
+ return 5000000 / clkdiv;
}
/**
@@ -274,27 +278,22 @@ unsigned int i2c_get_bus_speed(void)
*/
void i2c_init(int speed, int slaveaddr)
{
- uint8_t prescale = ((get_i2c_clk() / 1000 / 1000 + 5) / 10) & 0x7F;
+ u16 prescale = ((get_i2c_clk() / 1000 / 1000 + 5) / 10) & 0x7F;
/* Set TWI internal clock as 10MHz */
- twi->control = prescale;
+ writew(prescale, &twi->control);
/* Set TWI interface clock as specified */
i2c_set_bus_speed(speed);
/* Enable it */
- twi->control = TWI_ENA | prescale;
- SSYNC();
+ writew(TWI_ENA | prescale, &twi->control);
- debugi("CONTROL:0x%04x CLKDIV:0x%04x", twi->control, twi->clkdiv);
+ debugi("CONTROL:0x%04x CLKDIV:0x%04x", readw(&twi->control),
+ readw(&twi->clkdiv));
#if CONFIG_SYS_I2C_SLAVE
# error I2C slave support not tested/supported
- /* If they want us as a slave, do it */
- if (slaveaddr) {
- twi->slave_addr = slaveaddr;
- twi->slave_ctl = SEN;
- }
#endif
}
@@ -320,7 +319,8 @@ int i2c_probe(uchar chip)
*/
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
- return i2c_transfer(chip, addr, alen, buffer, len, (alen ? I2C_M_COMBO : I2C_M_READ));
+ return i2c_transfer(chip, addr, alen, buffer,
+ len, (alen ? I2C_M_COMBO : I2C_M_READ));
}
/**
@@ -346,15 +346,21 @@ int i2c_set_bus_num(unsigned int bus)
{
switch (bus) {
#if CONFIG_SYS_MAX_I2C_BUS > 0
- case 0: twi = (void *)TWI0_CLKDIV; return 0;
+ case 0:
+ twi = (void *)TWI0_CLKDIV;
+ return 0;
#endif
#if CONFIG_SYS_MAX_I2C_BUS > 1
- case 1: twi = (void *)TWI1_CLKDIV; return 0;
+ case 1:
+ twi = (void *)TWI1_CLKDIV;
+ return 0;
#endif
#if CONFIG_SYS_MAX_I2C_BUS > 2
- case 2: twi = (void *)TWI2_CLKDIV; return 0;
+ case 2:
+ twi = (void *)TWI2_CLKDIV;
+ return 0;
#endif
- default: return -1;
+ default: return -1;
}
}
@@ -365,14 +371,17 @@ unsigned int i2c_get_bus_num(void)
{
switch ((unsigned long)twi) {
#if CONFIG_SYS_MAX_I2C_BUS > 0
- case TWI0_CLKDIV: return 0;
+ case TWI0_CLKDIV:
+ return 0;
#endif
#if CONFIG_SYS_MAX_I2C_BUS > 1
- case TWI1_CLKDIV: return 1;
+ case TWI1_CLKDIV:
+ return 1;
#endif
#if CONFIG_SYS_MAX_I2C_BUS > 2
- case TWI2_CLKDIV: return 2;
+ case TWI2_CLKDIV:
+ return 2;
#endif
- default: return -1;
+ default: return -1;
}
}
--
1.8.2.3
^ permalink raw reply related [flat|nested] 8+ messages in thread