Re: fsl framebuffer image ?

[David Hill <David.Hill@Oracle.com>]

Thanks Otavio,
   I see now that I picked the wrong machine type for the SDP in this build, which now make clear to me why I had a failure building u-boot. Unfortunately I don't need to do a lot of this so it is easy to stumble on which board is which.

    My need is for fsl-image-fb (or something close to it). Any recent kernel will do as long as I can get the accelerated framebuffer rendering stuff with a handful of other useful items like sshd.

We have several different boards in my group, Freescale and Boundry and maybe even a Wandboard, so I would really prefer not to use the meta-fsl-bsp-release if there is an easier, mainline way that I can understand. (And I guess follow directions).

Any suggestions as to how I should proceed with to get accelerated fb support with fsl-community-bsp other than the earlier suggestion of  qt4e-demo-image?

I really wish that fsl-image-x11 just contained the two needed GL libraries with different postfixes like it used to. (libEGL-fb.so) I don't care about the image size because I am not distributing it.

thanks,
     Dave


On 1/31/14, Jan 31, 11:11 AM, Otavio Salvador wrote:
> Hello David,
>
> On Thu, Jan 30, 2014 at 7:55 PM, David Hill <David.Hill@oracle.com> wrote:
>> On 1/14/14, Jan 14, 9:25 PM, Lauren Post wrote:
>>> You can use the one in our meta-fsl-bsp-release layer.  There is one being
>>> reviewed based on the one Freescale released in the meta-fsl-bsp-release
>>> layer.  Our current 3.10.17-1.0.0 beta has support for all the graphical
>>> backends including the related image recipes for each backend.
>>>
>>> Get meta-fsl-release-layer from git.freescale.com.
>>
>>
>> Hi Lauren,
>>     could I trouble you for a quick question ? I am getting a build failure
>> and have not a clue how to proceed.
>>
>> meta-fsl-bsp-release & git checkout origin/dora_3.10.17-1.0.0_beta
>>
>> MACHINE=imx6qsabrelite
>> bitbake fsl-iamge-fb
> ...
>
> Personally I don't use the meta-fsl-bsp-release layer as it's not a
> community layer, and we cannot contribute back patches and fixes to
> it.
>
> The  release layer is the official way Freescale is using to release
> its new source code on top of meta-fsl-arm. The supported board list
> is limited and is usually available in its release notes. But I don't
> believe sabrelite is supported, as it's not a board from Freescale.
>
> I recommend you to use the fsl-community-bsp as is as sabrelite is
> properly supported in there by Boundary Devices. You can see a blog
> post[1] about how to build an image for Nitrogen6x (which works for
> sabrelite board too). Just change "dylan" to "dora", the latest stable
> release.
>
> If you need kernel 3.10.17 you can have an early snapshot on
> master-next, although it's a work in progress, so far.
>
> 1. http://www.ossystems.com.br/blog/2013/04/15/yocto-with-boundary-devices-nitrogen6x-5-steps-only.html
>
> Regards,
>


-- 
David Hill <David.Hill@Oracle.com>
Java Embedded Development

Any society that would give up a little liberty to gain a little security will deserve neither and lose both.
-- Benjamin Franklin