Why are imprecise external aborts masked on recent kernel while booting ?

[fabrice.gasnier@st.com (Fabrice Gasnier)]

Hi,

I had no success with msr instruction to set CPSR.A bit.

I re-checked on a 3.4 kernel, msr instruction present in former 
"kernel_thread_helper()" routine was not responsible for clearing CPSR.A 
bit.
'A' bit was cleared because SPSR was altered before executing following 
instruction in arch/arm/kernel/entry-header.S :
movs    pc, lr                @ return & move spsr_svc into cpsr

Sorry for the confusion in my first email: that movs instruction was 
responsible for clearing 'A' bit on 3.4 kernel. But on recent kernel, 
"restore_user_regs" macro seems no longer called for a kernel thread.

So, I tried the 'cps'instruction that does it! I re-worked slightly your 
previous patch.
I also noticed that secondary needs to be set separately.

Please, could you comment on the following patch ? (I can resend 
correctly formated patch if you wish) :

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index dc894ab..e22b109 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -378,6 +378,9 @@ asmlinkage void secondary_start_kernel(void)
         local_irq_enable();
         local_fiq_enable();

+       /* Enable imprecise aborts */
+       asm volatile("cpsie     a");
+
         /*
          * OK, it's off to the idle thread for us
          */
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 4636d56..a9567bb 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -900,6 +900,10 @@ void __init early_trap_init(void *vectors_base)

         flush_icache_range(vectors, vectors + PAGE_SIZE * 2);
         modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
+
+       /* Enable imprecise aborts */
+       asm volatile("cpsie     a");
+
  #else /* ifndef CONFIG_CPU_V7M */
         /*
          * on V7-M there is no need to copy the vector table to a dedicated

Thanks,
BR,
Fabrice

On 02/03/2014 10:12 AM, Fabrice Gasnier wrote:
> Hi Russell,
>
> Thank you for your help.
> I just tried following patch on both 3.10 and above vanilla 3.13.1.
> Unfortunately, these instructions have no effect on the arm cpsr.
> I dumped regs right after msr instruction have been executed. It 
> remains untouched :
>
> Here is assembly from gdb:
>
>    0xc064a400 <+128>:    mov    r3, #256    ; 0x100
>    0xc064a404 <+132>:    mrs    r2, CPSR
>    0xc064a408 <+136>:    bic    r2, r2, r3
>    0xc064a40c <+140>:    msr    CPSR_c, r2
>
> CPSR.A bit is still set after these instructions : 0x600001d3
> Although, I see it has been cleared in r2: 0x600000d3
>
> Please advise.
> Thanks,
> BR,
> Fabrice
> On 01/31/2014 06:08 PM, Russell King - ARM Linux wrote:
>>> Is it possible to unmask imprecise data aborts earlier in the boot
>>> >process (e.g. before PCIe bus enumeration, when drivers are being 
>>> probed)
>>> >?
>> How about this patch?
>>
>> diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
>> index 172ee18ff124..b0ff06f49cd0 100644
>> --- a/arch/arm/kernel/traps.c
>> +++ b/arch/arm/kernel/traps.c
>> @@ -900,6 +900,15 @@ void __init early_trap_init(void *vectors_base)
>>         flush_icache_range(vectors, vectors + PAGE_SIZE * 2);
>>       modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
>> +
>> +    /* Enable imprecise aborts */
>> +    asm volatile(
>> +        "mrs    %0, cpsr\n"
>> +    "    bic    %0, %0, %1\n"
>> +    "    msr    cpsr_c, %0"
>> +        : "=&r" (i)
>> +        : "r" (PSR_A_BIT));
>> +
>>   #else /* ifndef CONFIG_CPU_V7M */
>>       /*
>>        * on V7-M there is no need to copy the vector table to a 
>> dedicated
>