From: Andrew Cooper <andrew.cooper3@citrix.com>
To: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>,
jbeulich@suse.com, suravee.suthikulpanit@amd.com,
xen-devel@lists.xen.org, keir@xen.org
Subject: Re: [PATCH] x86/AMD: Apply workaround for AMD F16h Erratum792
Date: Wed, 5 Feb 2014 20:54:42 +0000 [thread overview]
Message-ID: <52F2A512.30304@citrix.com> (raw)
In-Reply-To: <1391633972-4433-1-git-send-email-Aravind.Gopalakrishnan@amd.com>
On 05/02/2014 20:59, Aravind Gopalakrishnan wrote:
> Workaround for the Erratum will be in BIOSes spun only after
> Jan 2014 onwards. But initial production parts shipped in 2013
> itself. Since there is a coverage hole, we should carry this fix
> in software in case BIOS does not do the right thing or someone
> is using old BIOS.
>
> Refer to Revision Guide for AMD F16h models 00h-0fh, document 51810
> Rev. 3.04, November2013 for details on the Erratum.
>
> Tested the patch on Fam16h server platform and it works fine.
>
> Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
> Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
>
> ---
> xen/arch/x86/cpu/amd.c | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/xen/arch/x86/cpu/amd.c b/xen/arch/x86/cpu/amd.c
> index 3307141..f2780c4 100644
> --- a/xen/arch/x86/cpu/amd.c
> +++ b/xen/arch/x86/cpu/amd.c
> @@ -369,6 +369,7 @@ static void __devinit init_amd(struct cpuinfo_x86 *c)
> u32 l, h;
>
> unsigned long long value;
> + u32 pci_val;
Please move this to the scope created by the lower hunk.
>
> /* Disable TLB flush filter by setting HWCR.FFDIS on K8
> * bit 6 of msr C001_0015
> @@ -477,6 +478,35 @@ static void __devinit init_amd(struct cpuinfo_x86 *c)
> " all your (PV) guest kernels. ***\n");
>
> if (c->x86 == 0x16 && c->x86_model <= 0xf) {
> + /*
> + * Apply workaround for erratum 792
> + * Description:
> + * Processor does not ensure DRAM scrub read/write sequence
> + * is atomic wrt accesses to CC6 save state area. Therefore
> + * if a concurrent scrub read/write access is to same address
> + * the entry may appear as if it is not written. This quirk
> + * applies to Fam16h models 00h-0Fh
> + *
> + * See "Revision Guide" for AMD F16h models 00h-0fh,
> + * document 51810 rev. 3.04, Nov 2013
> + *
> + * Equivalent Linux patch link:
> + * http://marc.info/?l=linux-kernel&m=139066012217149&w=2
> + */
> + if (smp_processor_id() == 0) {
> + pci_val = pci_conf_read32(0, 0, 0x18, 0x3, 0x58);
> + if (pci_val & 0x1f) {
> + pci_val &= ~(0x1f);
0x1f is by default an int, so you use a u suffix to make it u32 to use
as a mask. Brackets are not really needed.
> + pci_conf_write32(0, 0, 0x18, 0x3, 0x58, pci_val);
> + }
> +
> + pci_val = pci_conf_read32(0, 0, 0x18, 0x3, 0x5c);
> + if (pci_val & 0x1) {
> + pci_val &= ~(0x1);
> + pci_conf_write32(0, 0, 0x18, 0x3, 0x5c, pci_val);
> + }
> + }
> +
Indentation needs some work. This file derives from Linux so uses tabs
(at 8 spaces wide), rather than the Xen style of 4 spaces.
~Andrew
> rdmsrl(MSR_AMD64_LS_CFG, value);
> if (!(value & (1 << 15))) {
> static bool_t warned;
next prev parent reply other threads:[~2014-02-05 20:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-05 20:59 [PATCH] x86/AMD: Apply workaround for AMD F16h Erratum792 Aravind Gopalakrishnan
2014-02-05 20:54 ` Andrew Cooper [this message]
2014-02-05 21:22 ` Aravind Gopalakrishnan
2014-02-06 10:15 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52F2A512.30304@citrix.com \
--to=andrew.cooper3@citrix.com \
--cc=Aravind.Gopalakrishnan@amd.com \
--cc=jbeulich@suse.com \
--cc=keir@xen.org \
--cc=suravee.suthikulpanit@amd.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.