All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Oliver Hartkopp <socketcan@hartkopp.net>,
	"linux-can@vger.kernel.org" <linux-can@vger.kernel.org>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Subject: Re: [PATCH can-next] Add CAN FD driver infrastructure
Date: Thu, 06 Feb 2014 12:41:16 +0100	[thread overview]
Message-ID: <52F374DC.3000105@pengutronix.de> (raw)
In-Reply-To: <52F291D8.90008@hartkopp.net>

[-- Attachment #1: Type: text/plain, Size: 12730 bytes --]

On 02/05/2014 08:32 PM, Oliver Hartkopp wrote:
> This is a combined patch to create the CAN FD driver infrastructure.
> 
> - add a separate configuration for data bittiming (incl. netlink)
> - the bitrate information is only provided when the bittiming const exist
> - add the helper to create canfd frame skbs
> - do not overwrite the skb->protocol in can_put_echo_skb()

Can you split up the patch into the above mentioned aspects? More
comments inline.

Marc
> 
> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
>
> ---
> 
> diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
> index fc59bc6..485b266 100644
> --- a/drivers/net/can/dev.c
> +++ b/drivers/net/can/dev.c
> @@ -99,10 +99,10 @@ static int can_update_spt(const struct can_bittiming_const *btc,
>  	return 1000 * (tseg + 1 - *tseg2) / (tseg + 1);
>  }
>  
> -static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt)
> +static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
> +			      const struct can_bittiming_const *btc)
>  {
>  	struct can_priv *priv = netdev_priv(dev);
> -	const struct can_bittiming_const *btc = priv->bittiming_const;
>  	long rate, best_rate = 0;
>  	long best_error = 1000000000, error = 0;
>  	int best_tseg = 0, best_brp = 0, brp = 0;
> @@ -110,7 +110,7 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt)
>  	int spt_error = 1000, spt = 0, sampl_pt;
>  	u64 v64;
>  
> -	if (!priv->bittiming_const)
> +	if (!btc)
>  		return -ENOTSUPP;
>  
>  	/* Use CIA recommended sample points */
> @@ -204,7 +204,8 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt)
>  	return 0;
>  }
>  #else /* !CONFIG_CAN_CALC_BITTIMING */
> -static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt)
> +static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
> +			      const struct can_bittiming_const *btc)
>  {
>  	netdev_err(dev, "bit-timing calculation not available\n");
>  	return -EINVAL;
> @@ -217,14 +218,14 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt)
>   * prescaler value brp. You can find more information in the header
>   * file linux/can/netlink.h.
>   */
> -static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt)
> +static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt,
> +			       const struct can_bittiming_const *btc)
>  {
>  	struct can_priv *priv = netdev_priv(dev);
> -	const struct can_bittiming_const *btc = priv->bittiming_const;
>  	int tseg1, alltseg;
>  	u64 brp64;
>  
> -	if (!priv->bittiming_const)
> +	if (!btc)
>  		return -ENOTSUPP;
>  
>  	tseg1 = bt->prop_seg + bt->phase_seg1;
> @@ -254,21 +255,21 @@ static int can_fixup_bittiming(struct net_device *dev, struct can_bittiming *bt)
>  	return 0;
>  }
>  
> -static int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt)
> +static int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt,
> +			     const struct can_bittiming_const *btc)
>  {
> -	struct can_priv *priv = netdev_priv(dev);
>  	int err;
>  
>  	/* Check if the CAN device has bit-timing parameters */
> -	if (priv->bittiming_const) {
> +	if (btc) {
>  
>  		/* Non-expert mode? Check if the bitrate has been pre-defined */
>  		if (!bt->tq)
>  			/* Determine bit-timing parameters */
> -			err = can_calc_bittiming(dev, bt);
> +			err = can_calc_bittiming(dev, bt, btc);
>  		else
>  			/* Check bit-timing params and calculate proper brp */
> -			err = can_fixup_bittiming(dev, bt);
> +			err = can_fixup_bittiming(dev, bt, btc);
>  		if (err)
>  			return err;
>  	}
> @@ -317,7 +318,9 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
>  	BUG_ON(idx >= priv->echo_skb_max);
>  
>  	/* check flag whether this packet has to be looped back */
> -	if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK) {
> +	if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK ||
> +	    (skb->protocol != htons(ETH_P_CAN) &&
> +	     skb->protocol != htons(ETH_P_CANFD))) {
>  		kfree_skb(skb);
>  		return;
>  	}
> @@ -329,7 +332,6 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
>  			return;
>  
>  		/* make settings for echo to reduce code in irq context */
> -		skb->protocol = htons(ETH_P_CAN);
>  		skb->pkt_type = PACKET_BROADCAST;
>  		skb->ip_summed = CHECKSUM_UNNECESSARY;
>  		skb->dev = dev;
> @@ -512,6 +514,30 @@ struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf)
>  }
>  EXPORT_SYMBOL_GPL(alloc_can_skb);
>  
> +struct sk_buff *alloc_canfd_skb(struct net_device *dev,
> +				struct canfd_frame **cfd)

Stephane already posted a patch to add this function. I've already
queued it. Please base you patch on linux-can-next/testing

> +{
> +	struct sk_buff *skb;
> +
> +	skb = netdev_alloc_skb(dev, sizeof(struct can_skb_priv) +
> +			       sizeof(struct canfd_frame));
> +	if (unlikely(!skb))
> +		return NULL;
> +
> +	skb->protocol = htons(ETH_P_CANFD);
> +	skb->pkt_type = PACKET_BROADCAST;
> +	skb->ip_summed = CHECKSUM_UNNECESSARY;
> +
> +	can_skb_reserve(skb);
> +	can_skb_prv(skb)->ifindex = dev->ifindex;
> +
> +	*cfd = (struct canfd_frame *)skb_put(skb, sizeof(struct canfd_frame));
> +	memset(*cfd, 0, sizeof(struct canfd_frame));
> +
> +	return skb;
> +}
> +EXPORT_SYMBOL_GPL(alloc_canfd_skb);
> +
>  struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf)
>  {
>  	struct sk_buff *skb;
> @@ -624,6 +650,10 @@ static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = {
>  				= { .len = sizeof(struct can_bittiming_const) },
>  	[IFLA_CAN_CLOCK]	= { .len = sizeof(struct can_clock) },
>  	[IFLA_CAN_BERR_COUNTER]	= { .len = sizeof(struct can_berr_counter) },
> +	[IFLA_CAN_DATA_BITTIMING]
> +				= { .len = sizeof(struct can_bittiming) },
> +	[IFLA_CAN_DATA_BITTIMING_CONST]
> +				= { .len = sizeof(struct can_bittiming_const) },
>  };
>  
>  static int can_changelink(struct net_device *dev,
> @@ -644,7 +674,7 @@ static int can_changelink(struct net_device *dev,
>  		memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
>  		if ((!bt.bitrate && !bt.tq) || (bt.bitrate && bt.tq))
>  			return -EINVAL;
> -		err = can_get_bittiming(dev, &bt);
> +		err = can_get_bittiming(dev, &bt, priv->bittiming_const);
>  		if (err)
>  			return err;
>  		memcpy(&priv->bittiming, &bt, sizeof(bt));
> @@ -657,6 +687,29 @@ static int can_changelink(struct net_device *dev,
>  		}
>  	}
>  
> +	if (data[IFLA_CAN_DATA_BITTIMING]) {
> +		struct can_bittiming bt;
> +
> +		/* Do not allow changing bittiming while running */
> +		if (dev->flags & IFF_UP)
> +			return -EBUSY;
> +		memcpy(&bt, nla_data(data[IFLA_CAN_DATA_BITTIMING]),
> +		       sizeof(bt));
> +		if ((!bt.bitrate && !bt.tq) || (bt.bitrate && bt.tq))
> +			return -EINVAL;
> +		err = can_get_bittiming(dev, &bt, priv->data_bittiming_const);
> +		if (err)
> +			return err;
> +		memcpy(&priv->data_bittiming, &bt, sizeof(bt));
> +
> +		if (priv->do_set_data_bittiming) {
> +			/* Finally, set the bit-timing registers */
> +			err = priv->do_set_data_bittiming(dev);
> +			if (err)
> +				return err;
> +		}
> +	}
> +
>  	if (data[IFLA_CAN_CTRLMODE]) {
>  		struct can_ctrlmode *cm;
>  
> @@ -694,16 +747,23 @@ static size_t can_get_size(const struct net_device *dev)
>  	struct can_priv *priv = netdev_priv(dev);
>  	size_t size = 0;
>  
> -	size += nla_total_size(sizeof(struct can_bittiming));	/* IFLA_CAN_BITTIMING */
> -	if (priv->bittiming_const)				/* IFLA_CAN_BITTIMING_CONST */
> +	if (priv->bittiming_const) {	/* IFLA_CAN_BITTIMING[_CONST] */
> +		size += nla_total_size(sizeof(struct can_bittiming));
>  		size += nla_total_size(sizeof(struct can_bittiming_const));
> +	}
> +
>  	size += nla_total_size(sizeof(struct can_clock));	/* IFLA_CAN_CLOCK */
>  	size += nla_total_size(sizeof(u32));			/* IFLA_CAN_STATE */
>  	size += nla_total_size(sizeof(struct can_ctrlmode));	/* IFLA_CAN_CTRLMODE */
>  	size += nla_total_size(sizeof(u32));			/* IFLA_CAN_RESTART_MS */
> +
>  	if (priv->do_get_berr_counter)				/* IFLA_CAN_BERR_COUNTER */
>  		size += nla_total_size(sizeof(struct can_berr_counter));
>  
> +	if (priv->data_bittiming_const)	{/* IFLA_CAN_DATA_BITTIMING[_CONST] */
> +		size += nla_total_size(sizeof(struct can_bittiming));
> +		size += nla_total_size(sizeof(struct can_bittiming_const));
> +	}
>  	return size;
>  }
>  
> @@ -716,19 +776,33 @@ static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
>  
>  	if (priv->do_get_state)
>  		priv->do_get_state(dev, &state);
> -	if (nla_put(skb, IFLA_CAN_BITTIMING,
> -		    sizeof(priv->bittiming), &priv->bittiming) ||
> +
> +	if ((priv->bittiming_const &&
> +	     nla_put(skb, IFLA_CAN_BITTIMING,
> +		     sizeof(priv->bittiming), &priv->bittiming)) ||
> +
>  	    (priv->bittiming_const &&
>  	     nla_put(skb, IFLA_CAN_BITTIMING_CONST,
>  		     sizeof(*priv->bittiming_const), priv->bittiming_const)) ||
> +
>  	    nla_put(skb, IFLA_CAN_CLOCK, sizeof(cm), &priv->clock) ||
>  	    nla_put_u32(skb, IFLA_CAN_STATE, state) ||
>  	    nla_put(skb, IFLA_CAN_CTRLMODE, sizeof(cm), &cm) ||
>  	    nla_put_u32(skb, IFLA_CAN_RESTART_MS, priv->restart_ms) ||
> +
>  	    (priv->do_get_berr_counter &&
>  	     !priv->do_get_berr_counter(dev, &bec) &&
> -	     nla_put(skb, IFLA_CAN_BERR_COUNTER, sizeof(bec), &bec)))
> +	     nla_put(skb, IFLA_CAN_BERR_COUNTER, sizeof(bec), &bec)) ||
> +
> +	    (priv->data_bittiming_const &&
> +	     nla_put(skb, IFLA_CAN_DATA_BITTIMING,
> +		     sizeof(priv->data_bittiming), &priv->data_bittiming)) ||
> +
> +	    (priv->data_bittiming_const &&
> +	     nla_put(skb, IFLA_CAN_DATA_BITTIMING_CONST,
> +		     sizeof(*priv->data_bittiming_const), priv->data_bittiming_const)))
>  		return -EMSGSIZE;
> +
>  	return 0;
>  }
>  
> diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
> index fb0ab65..8adaee9 100644
> --- a/include/linux/can/dev.h
> +++ b/include/linux/can/dev.h
> @@ -33,8 +33,9 @@ enum can_mode {
>  struct can_priv {
>  	struct can_device_stats can_stats;
>  
> -	struct can_bittiming bittiming;
> -	const struct can_bittiming_const *bittiming_const;
> +	struct can_bittiming bittiming, data_bittiming;
> +	const struct can_bittiming_const *bittiming_const,
> +		*data_bittiming_const;
>  	struct can_clock clock;
>  
>  	enum can_state state;
> @@ -45,6 +46,7 @@ struct can_priv {
>  	struct timer_list restart_timer;
>  
>  	int (*do_set_bittiming)(struct net_device *dev);
> +	int (*do_set_data_bittiming)(struct net_device *dev);
>  	int (*do_set_mode)(struct net_device *dev, enum can_mode mode);
>  	int (*do_get_state)(const struct net_device *dev,
>  			    enum can_state *state);
> @@ -124,6 +126,8 @@ unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx);
>  void can_free_echo_skb(struct net_device *dev, unsigned int idx);
>  
>  struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf);
> +struct sk_buff *alloc_canfd_skb(struct net_device *dev,
> +				struct canfd_frame **cfd);
>  struct sk_buff *alloc_can_err_skb(struct net_device *dev,
>  				  struct can_frame **cf);
>  
> diff --git a/include/uapi/linux/can/netlink.h b/include/uapi/linux/can/netlink.h
> index df944ed..7e2e186 100644
> --- a/include/uapi/linux/can/netlink.h
> +++ b/include/uapi/linux/can/netlink.h
> @@ -96,6 +96,7 @@ struct can_ctrlmode {
>  #define CAN_CTRLMODE_3_SAMPLES		0x04	/* Triple sampling mode */
>  #define CAN_CTRLMODE_ONE_SHOT		0x08	/* One-Shot mode */
>  #define CAN_CTRLMODE_BERR_REPORTING	0x10	/* Bus-error reporting */
> +#define CAN_CTRLMODE_FD			0x20	/* CAN FD mode */
>  
>  /*
>   * CAN device statistics
> @@ -122,6 +123,8 @@ enum {
>  	IFLA_CAN_RESTART_MS,
>  	IFLA_CAN_RESTART,
>  	IFLA_CAN_BERR_COUNTER,
> +	IFLA_CAN_DATA_BITTIMING,
> +	IFLA_CAN_DATA_BITTIMING_CONST,
>  	__IFLA_CAN_MAX
>  };
>  
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-can" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 242 bytes --]

  reply	other threads:[~2014-02-06 11:41 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-05 19:32 [PATCH can-next] Add CAN FD driver infrastructure Oliver Hartkopp
2014-02-06 11:41 ` Marc Kleine-Budde [this message]
2014-02-06 19:02   ` Oliver Hartkopp
2014-02-06 20:39     ` Marc Kleine-Budde
2014-02-12 11:15     ` Marc Kleine-Budde
2014-02-12 19:33       ` Oliver Hartkopp
2014-02-13 11:55         ` Marc Kleine-Budde
2014-02-14 20:58           ` Oliver Hartkopp

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52F374DC.3000105@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=linux-can@vger.kernel.org \
    --cc=s.grosjean@peak-system.com \
    --cc=socketcan@hartkopp.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.