All of lore.kernel.org
 help / color / mirror / Atom feed
From: GEORGE <geoubuntu@gmail.com>
To: linux-media@vger.kernel.org
Subject: Re: [PATCH] bttv: Add support for Kworld V-Stream Xpert TV PVR878
Date: Fri, 07 Feb 2014 20:29:53 +0200	[thread overview]
Message-ID: <52F52621.2010602@gmail.com> (raw)
In-Reply-To: <52F51E41.7000000@gmail.com>


On 07.02.2014 19:56, GEORGE wrote:
> From 27c5541a93bee007d41a70b393c97ea19c62ace2 Mon Sep 17 00:00:00 2001
> From: POJAR GEORGE <geoubuntu@gmail.com>
> Date: Fri, 7 Feb 2014 19:34:41 +0200
> Subject: [PATCH] bttv: Add support for Kworld V-Stream Xpert TV PVR878
>
> Signed-off-by: POJAR GEORGE <geoubuntu@gmail.com>
> ---
>  Documentation/video4linux/CARDLIST.bttv |  1 +
>  drivers/media/video/bt8xx/bttv-cards.c  | 16 ++++++++++++++++
>  drivers/media/video/bt8xx/bttv-input.c  |  1 +
>  drivers/media/video/bt8xx/bttv.h        |  1 +
>  4 files changed, 19 insertions(+)
>
> diff --git a/Documentation/video4linux/CARDLIST.bttv 
> b/Documentation/video4linux/CARDLIST.bttv
> index 4739d56..0103fe4 100644
> --- a/Documentation/video4linux/CARDLIST.bttv
> +++ b/Documentation/video4linux/CARDLIST.bttv
> @@ -158,3 +158,4 @@
>  157 -> Geovision GV-800(S) (master) [800a:763d]
>  158 -> Geovision GV-800(S) (slave) [800b:763d,800c:763d,800d:763d]
>  159 -> ProVideo PV183 
> [1830:1540,1831:1540,1832:1540,1833:1540,1834:1540,1835:1540,1836:1540,1837:1540]
> +160 -> Kworld V-Stream Xpert TV PVR878
> diff --git a/drivers/media/video/bt8xx/bttv-cards.c 
> b/drivers/media/video/bt8xx/bttv-cards.c
> index 49efcf6..7e02b8e 100644
> --- a/drivers/media/video/bt8xx/bttv-cards.c
> +++ b/drivers/media/video/bt8xx/bttv-cards.c
> @@ -2916,6 +2916,22 @@ struct tvcard bttv_tvcards[] = {
>          .tuner_type     = TUNER_ABSENT,
>          .tuner_addr    = ADDR_UNSET,
>      },
> +    [BTTV_BOARD_KWORLD_VSTREAM_XPERT] = {
> +        /* POJAR GEORGE <geoubuntu@gmail.com> */
> +        .name           = "Kworld V-Stream Xpert TV PVR878",
> +        .video_inputs   = 3,
> +        /* .audio_inputs= 1, */
> +        .svhs           = 2,
> +        .gpiomask       = 0x001c0007,
> +        .muxsel         = MUXSEL(2, 3, 1, 1),
> +        .gpiomux        = { 0, 1, 2, 2 },
> +        .gpiomute     = 3,
> +        .pll            = PLL_28,
> +        .tuner_type     = TUNER_TENA_9533_DI,
> +        .tuner_addr    = ADDR_UNSET,
> +        .has_remote     = 1,
> +        .has_radio      = 1,
> +    },
>  };
>
>  static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
> diff --git a/drivers/media/video/bt8xx/bttv-input.c 
> b/drivers/media/video/bt8xx/bttv-input.c
> index 6bf05a7..3af1e23 100644
> --- a/drivers/media/video/bt8xx/bttv-input.c
> +++ b/drivers/media/video/bt8xx/bttv-input.c
> @@ -391,6 +391,7 @@ int bttv_input_init(struct bttv *btv)
>      case BTTV_BOARD_ASKEY_CPH03X:
>      case BTTV_BOARD_CONCEPTRONIC_CTVFMI2:
>      case BTTV_BOARD_CONTVFMI:
> +    case BTTV_BOARD_KWORLD_VSTREAM_XPERT:
>          ir_codes         = RC_MAP_PIXELVIEW;
>          ir->mask_keycode = 0x001F00;
>          ir->mask_keyup   = 0x006000;
> diff --git a/drivers/media/video/bt8xx/bttv.h 
> b/drivers/media/video/bt8xx/bttv.h
> index 6fd2a8e..dd926d8 100644
> --- a/drivers/media/video/bt8xx/bttv.h
> +++ b/drivers/media/video/bt8xx/bttv.h
> @@ -184,6 +184,7 @@
>  #define BTTV_BOARD_GEOVISION_GV800S       0x9d
>  #define BTTV_BOARD_GEOVISION_GV800S_SL       0x9e
>  #define BTTV_BOARD_PV183                   0x9f
> +#define BTTV_BOARD_KWORLD_VSTREAM_XPERT    0xa0
>
>
>  /* more card-specific defines */
> Update with INFO about this card
>
> I have a tuner Kworld Xpert TV-PVR 878 [PCI, FM radio, BG + DK, conexant
> 878a].
>
> When I try with options for card:
>
> 78 Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF   [0a01:17de],
>
> can't find any channels, radio and remote not work, so I use btspy to make
> a report:
>
>
> General information:
>
> Name:kworld 878a
> Chip: Bt878 , Rev: 0x00
> Subsystem: 0x00000000
> Vendor: Gammagraphx, Inc.
>
> Values to MUTE audio:
> Mute_GPOE : 0x1c0007
> Mute_GPDATA: 0x000001
> Has TV Tuner: Yes
> TV_Mux : 2
> TV_GPOE : 0x1c0007
> TV_GPDATA: 0x080000
> Number of Composite Ins: 1
> Composite in 1
> Composite1_Mux : 3
> Composite1_GPOE : 0x1c0007
> Composite1_GPDATA: 0x000002
> Has SVideo: Yes
> SVideo_Mux : 1
> SVideo_GPOE : 0x1c0007
> SVideo_GPDATA: 0x000002
> Has Radio: Yes
> Radio_GPOE : 0x1c0007
> Radio_GPDATA: 0x000001
>
>
> and put this configuration:
>
> options bttv card=78 tuner=38 gpiomask=0x1c0007
> audiomux=0x080000,0x000001,0x080000,0x080000,0x000001
>
> With this configuration TV, radio and remote work fine.
>
> So I make above patch to add full support for this card.
>
> from.inf file:
>
> Device ID List
>
> ID Number     Device
>
> 0x350         Bt848
> 0x351         Bt849
> 0x36E         Bt878 (Video Section)
> 0x36F         Bt879 (Video Section)
> 0x370         Bt880 (Video Section)
> 0x878         Bt878 (Audio Section)
> 0x879         Bt879 (Audio Section)
> 0x880         Bt880 (Audio Section)
>
> with EEPROM
>
> BT848.VideoDeviceDesc=BT848.PhilipsNTSC,
> PCI\VEN_109E&DEV_036E&SUBSYS_087817DE
> BT848.VideoDeviceDesc=BT848.PhilipsPAL,
> PCI\VEN_109E&DEV_036E&SUBSYS_087917DE
> BT848.VideoDeviceDesc=BT848.Philips4in1,
> PCI\VEN_109E&DEV_036E&SUBSYS_087A17DE
> BT848.VideoDeviceDesc=BT848.PhilTN5533,
> PCI\VEN_109E&DEV_036E&SUBSYS_087B17DE
> BT848.VideoDeviceDesc=BT848.PhilTN9533,
> PCI\VEN_109E&DEV_036E&SUBSYS_087C17DE
>
> without EEPROM
>
> BT848.VideoDeviceDesc=BT848.PhilipsNTSC,    PCI\VEN_109E&DEV_036E
> BT848.VideoDeviceDesc=BT848.PhilipsNTSC,
> PCI\VEN_109E&DEV_036E&SUBSYS_FFFFFFFF




      reply	other threads:[~2014-02-07 18:29 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-07 17:56 [PATCH] bttv: Add support for Kworld V-Stream Xpert TV PVR878 GEORGE
2014-02-07 18:29 ` GEORGE [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52F52621.2010602@gmail.com \
    --to=geoubuntu@gmail.com \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.