From: Jonathan Cameron <jic23@kernel.org>
To: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Cc: Ge Gao <ggao@invensense.com>, linux-iio@vger.kernel.org
Subject: Re: [PATCH 2/3] iio: imu: inv_mpu6050: Fix typo and formatting
Date: Sat, 08 Feb 2014 12:29:32 +0000 [thread overview]
Message-ID: <52F6232C.5040508@kernel.org> (raw)
In-Reply-To: <1391596475-21986-2-git-send-email-manuel.stahl@iis.fraunhofer.de>
On 05/02/14 10:34, Manuel Stahl wrote:
> Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Applied to the togreg branch of iio.git
Thanks,
> ---
> drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 2 +-
> drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 38 +++++++++++++++---------------
> 2 files changed, 20 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> index df7f1e1..fda1ee2 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> @@ -117,7 +117,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
> return result;
>
> if (en) {
> - /* Wait for output stablize */
> + /* Wait for output stabilize */
> msleep(INV_MPU6050_TEMP_UP_TIME);
> if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
> /* switch internal clock to PLL */
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> index f383955..0ab382b 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> @@ -126,35 +126,35 @@ struct inv_mpu6050_state {
> #define INV_MPU6050_REG_SAMPLE_RATE_DIV 0x19
> #define INV_MPU6050_REG_CONFIG 0x1A
> #define INV_MPU6050_REG_GYRO_CONFIG 0x1B
> -#define INV_MPU6050_REG_ACCEL_CONFIG 0x1C
> +#define INV_MPU6050_REG_ACCEL_CONFIG 0x1C
>
> #define INV_MPU6050_REG_FIFO_EN 0x23
> -#define INV_MPU6050_BIT_ACCEL_OUT 0x08
> -#define INV_MPU6050_BITS_GYRO_OUT 0x70
> +#define INV_MPU6050_BIT_ACCEL_OUT 0x08
> +#define INV_MPU6050_BITS_GYRO_OUT 0x70
>
> #define INV_MPU6050_REG_INT_ENABLE 0x38
> -#define INV_MPU6050_BIT_DATA_RDY_EN 0x01
> -#define INV_MPU6050_BIT_DMP_INT_EN 0x02
> +#define INV_MPU6050_BIT_DATA_RDY_EN 0x01
> +#define INV_MPU6050_BIT_DMP_INT_EN 0x02
>
> #define INV_MPU6050_REG_RAW_ACCEL 0x3B
> #define INV_MPU6050_REG_TEMPERATURE 0x41
> #define INV_MPU6050_REG_RAW_GYRO 0x43
>
> #define INV_MPU6050_REG_USER_CTRL 0x6A
> -#define INV_MPU6050_BIT_FIFO_RST 0x04
> -#define INV_MPU6050_BIT_DMP_RST 0x08
> -#define INV_MPU6050_BIT_I2C_MST_EN 0x20
> -#define INV_MPU6050_BIT_FIFO_EN 0x40
> -#define INV_MPU6050_BIT_DMP_EN 0x80
> +#define INV_MPU6050_BIT_FIFO_RST 0x04
> +#define INV_MPU6050_BIT_DMP_RST 0x08
> +#define INV_MPU6050_BIT_I2C_MST_EN 0x20
> +#define INV_MPU6050_BIT_FIFO_EN 0x40
> +#define INV_MPU6050_BIT_DMP_EN 0x80
>
> #define INV_MPU6050_REG_PWR_MGMT_1 0x6B
> -#define INV_MPU6050_BIT_H_RESET 0x80
> -#define INV_MPU6050_BIT_SLEEP 0x40
> -#define INV_MPU6050_BIT_CLK_MASK 0x7
> +#define INV_MPU6050_BIT_H_RESET 0x80
> +#define INV_MPU6050_BIT_SLEEP 0x40
> +#define INV_MPU6050_BIT_CLK_MASK 0x7
>
> #define INV_MPU6050_REG_PWR_MGMT_2 0x6C
> -#define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38
> -#define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07
> +#define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38
> +#define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07
>
> #define INV_MPU6050_REG_FIFO_COUNT_H 0x72
> #define INV_MPU6050_REG_FIFO_R_W 0x74
> @@ -180,10 +180,10 @@ struct inv_mpu6050_state {
>
> /* init parameters */
> #define INV_MPU6050_INIT_FIFO_RATE 50
> -#define INV_MPU6050_TIME_STAMP_TOR 5
> -#define INV_MPU6050_MAX_FIFO_RATE 1000
> -#define INV_MPU6050_MIN_FIFO_RATE 4
> -#define INV_MPU6050_ONE_K_HZ 1000
> +#define INV_MPU6050_TIME_STAMP_TOR 5
> +#define INV_MPU6050_MAX_FIFO_RATE 1000
> +#define INV_MPU6050_MIN_FIFO_RATE 4
> +#define INV_MPU6050_ONE_K_HZ 1000
>
> /* scan element definition */
> enum inv_mpu6050_scan {
>
next prev parent reply other threads:[~2014-02-08 12:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-05 10:34 [PATCH 1/3] iio: imu: mpu6050: Move config entry into IMU menu Manuel Stahl
2014-02-05 10:34 ` [PATCH 2/3] iio: imu: inv_mpu6050: Fix typo and formatting Manuel Stahl
2014-02-08 12:29 ` Jonathan Cameron [this message]
2014-02-05 10:34 ` [PATCH 3/3] iio: imu: inv_mpu6050: Add basic support for mpu9150 Manuel Stahl
2014-02-08 12:31 ` Jonathan Cameron
2014-02-10 18:20 ` Ge Gao
2014-02-10 18:39 ` Manuel Stahl
2014-02-11 19:12 ` Ge Gao
2014-02-15 12:28 ` Jonathan Cameron
2014-02-15 13:39 ` Wolfram Sang
2014-02-18 8:34 ` Jonathan Cameron
2014-02-24 16:23 ` Lee Jones
2014-02-24 17:04 ` Wolfram Sang
2014-02-08 12:28 ` [PATCH 1/3] iio: imu: mpu6050: Move config entry into IMU menu Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52F6232C.5040508@kernel.org \
--to=jic23@kernel.org \
--cc=ggao@invensense.com \
--cc=linux-iio@vger.kernel.org \
--cc=manuel.stahl@iis.fraunhofer.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.