From: kapetr@mizera.cz
To: Antti Palosaari <crope@iki.fi>
Cc: linux-media@vger.kernel.org
Subject: Re: video from USB DVB-T get damaged after some time
Date: Mon, 10 Feb 2014 11:05:23 +0100 [thread overview]
Message-ID: <52F8A463.10003@mizera.cz> (raw)
In-Reply-To: <52F88F25.5000906@iki.fi>
Hello,
it is this one:
http://www.buyincoins.com/item/30948.html
I shop there often - lowest prices of all China e-shops I have found.
BTW: if you want try the shop - by registry/first buy give my nick
"jipan0" as referrer. You will get 5% off :-)
--kapetr
Dne 10.2.2014 09:34, Antti Palosaari napsal(a):
> Moi!
>
> On 10.02.2014 10:21, kapetr@mizera.cz wrote:
>> Hello,
>>
>> I have test FW version 12.10.04.1
>> (FYI dmesg changes follows)
>>
>> The problem without change.
>>
>> I did want to test the DVB-T stick under Windows XP, but in VirtualBox
>> works the tuner not at all - I get just jerky sound, no video.
>> But there is older driver (12.7.6.11) - but don't thing the problem is
>> there - rather in VBOX.
>> And no free partition to test.
>
>
> OK, thank for the testing anyway.
> I have few different it9135 devices. Could you find some picture of
> yours, I would like to test myself if I had same device.
>
> regards
> Antti
>
>
>
>
>>
>> Regards.
>>
>> kapetr
>>
>>
>> ----------- old from
>> https://raw.github.com/torvalds/linux/master/Documentation/dvb/get_dvb_firmware
>>
>>
>>
>>
>> [ 21.546241] usb 1-1.3: dvb_usb_af9035: prechip_version=83
>> chip_version=02 chip_type=9135
>> [ 21.546613] usb 1-1.3: dvb_usb_v2: found a 'ITE 9135 Generic' in cold
>> state
>> [ 21.563582] usb 1-1.3: dvb_usb_v2: downloading firmware from file
>> 'dvb-usb-it9135-02.fw'
>> [ 21.594974] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>> [ 21.659449] usb 1-1.3: dvb_usb_af9035: firmware version=3.39.1.0
>> [ 21.659456] usb 1-1.3: dvb_usb_v2: found a 'ITE 9135 Generic' in warm
>> state
>> [ 21.660358] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2
>> transport stream to the software demuxer
>> [ 21.660375] DVB: registering new adapter (ITE 9135 Generic)
>> [ 21.750565] i2c i2c-16: af9033: firmware version: LINK=0.0.0.0
>> OFDM=3.9.1.0
>> [ 21.750570] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Afatech
>> AF9033 (DVB-T))...
>> [ 22.064646] i2c i2c-16: tuner_it913x: ITE Tech IT913X successfully
>> attached
>> [ 22.099994] Registered IR keymap rc-it913x-v1
>> [ 22.100068] input: ITE 9135 Generic as
>> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0/input14
>> [ 22.100103] rc0: ITE 9135 Generic as
>> /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/rc/rc0
>> [ 22.100106] usb 1-1.3: dvb_usb_v2: schedule remote query interval to
>> 500 msecs
>> [ 22.100109] usb 1-1.3: dvb_usb_v2: 'ITE 9135 Generic' successfully
>> initialized and connected
>> [ 22.100123] usbcore: registered new interface driver dvb_usb_af9035
>>
>> ---------------new from
>> http://palosaari.fi/linux/v4l-dvb/firmware/IT9135/12.10.04.1/IT9135v2_3.42.3.3_3.29.3.3/
>>
>>
>>
>> Feb 9 15:00:54 zly-hugo kernel: [12732.520617] usb 1-1.3:
>> dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
>> Feb 9 15:00:54 zly-hugo kernel: [12732.520988] usb 1-1.3: dvb_usb_v2:
>> found a 'ITE 9135 Generic' in cold state
>> Feb 9 15:00:54 zly-hugo kernel: [12732.522267] usb 1-1.3: dvb_usb_v2:
>> downloading firmware from file 'dvb-usb-it9135-02.fw'
>> Feb 9 15:00:54 zly-hugo kernel: [12732.626497] usb 1-1.3:
>> dvb_usb_af9035: firmware version=3.42.3.3
>> Feb 9 15:00:54 zly-hugo kernel: [12732.626509] usb 1-1.3: dvb_usb_v2:
>> found a 'ITE 9135 Generic' in warm state
>> Feb 9 15:00:54 zly-hugo kernel: [12732.627381] usb 1-1.3: dvb_usb_v2:
>> will pass the complete MPEG2 transport stream to the software demuxer
>> Feb 9 15:00:54 zly-hugo kernel: [12732.627405] DVB: registering new
>> adapter (ITE 9135 Generic)
>> Feb 9 15:00:54 zly-hugo kernel: [12732.631208] i2c i2c-16: af9033:
>> firmware version: LINK=0.0.0.0 OFDM=3.29.3.3
>> Feb 9 15:00:54 zly-hugo kernel: [12732.631215] usb 1-1.3: DVB:
>> registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
>> Feb 9 15:00:54 zly-hugo kernel: [12732.631328] i2c i2c-16:
>> tuner_it913x: ITE Tech IT913X successfully attached
>> --------------
>>
>>
>>
>>
>> Dne 9.2.2014 05:57, Antti Palosaari napsal(a):
>>> On 09.02.2014 02:42, Antti Palosaari wrote:
>>>> Moikka!
>>>> I am going to extract new firmware. I dumped init tables out from
>>>> Windows driver version 12.07.06.1. Is there any newer?
>>>>
>>>> regards
>>>> Antti
>>>>
>>>
>>> I extracted firmwares from Windows driver 12.10.04.1. Didn't find newer
>>> driver...
>>>
>>> http://blog.palosaari.fi/2014/02/linux-it9135-driver-firmwares.html
>>>
>>> regards
>>> Antti
>>>
>
>
next prev parent reply other threads:[~2014-02-10 10:05 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-07 16:47 video from USB DVB-T get damaged after some time kapetr
2014-02-07 23:17 ` Antti Palosaari
2014-02-08 14:43 ` kapetr
2014-02-08 15:08 ` Malcolm Priestley
2014-02-08 18:35 ` kapetr
2014-02-08 20:36 ` Malcolm Priestley
2014-02-08 21:35 ` kapetr
2014-02-09 0:42 ` Antti Palosaari
2014-02-09 4:57 ` Antti Palosaari
2014-02-10 8:21 ` kapetr
2014-02-10 8:34 ` Antti Palosaari
2014-02-10 10:05 ` kapetr [this message]
2014-02-21 13:06 ` video from USB DVB-T get damaged after some time (it9135) kapetr
2014-02-26 13:33 ` Antti Palosaari
2014-02-26 15:10 ` kapetr
2014-02-26 15:34 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52F8A463.10003@mizera.cz \
--to=kapetr@mizera.cz \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.