From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Fwd: [PATCH 3/3] armv8/cache: Change cache invalidate and flush function
Date: Mon, 10 Feb 2014 13:58:54 -0800 [thread overview]
Message-ID: <52F94B9E.6090403@freescale.com> (raw)
In-Reply-To: <1392069354-24578-3-git-send-email-yorksun@freescale.com>
-------- Original Message --------
Subject: [PATCH 3/3] armv8/cache: Change cache invalidate and flush function
Date: Mon, 10 Feb 2014 13:55:54 -0800
From: York Sun <yorksun@freescale.com>
To: <albert.u.boot@aribaud.net>
CC: <scottwood@freescale.com>, York Sun <yorksun@freescale.com>, David Feng
<fenghua@phytium.com.cn>
When SoC first boots up, we should invalidate the cache but not flush it.
We can use the same function for invalid and flush mostly, with a wrapper.
Invalidating large cache can ben slow on emulator, so we postpone doing
so until I-cache is enabled, and before enabling D-cache.
Signed-off-by: York Sun <yorksun@freescale.com>
CC: David Feng <fenghua@phytium.com.cn>
---
arch/arm/cpu/armv8/cache.S | 53 +++++++++++++++++++++++++++++------------
arch/arm/cpu/armv8/cache_v8.c | 2 +-
arch/arm/cpu/armv8/start.S | 2 +-
arch/arm/include/asm/system.h | 1 +
4 files changed, 41 insertions(+), 17 deletions(-)
diff --git a/arch/arm/cpu/armv8/cache.S b/arch/arm/cpu/armv8/cache.S
index 546a83e..249799c 100644
--- a/arch/arm/cpu/armv8/cache.S
+++ b/arch/arm/cpu/armv8/cache.S
@@ -19,11 +19,12 @@
* clean and invalidate one level cache.
*
* x0: cache level
- * x1~x9: clobbered
+ * x1: 0 flush & invalidate, 1 invalidate only
+ * x2~x9: clobbered
*/
ENTRY(__asm_flush_dcache_level)
- lsl x1, x0, #1
- msr csselr_el1, x1 /* select cache level */
+ lsl x12, x0, #1
+ msr csselr_el1, x12 /* select cache level */
isb /* sync change of cssidr_el1 */
mrs x6, ccsidr_el1 /* read the new cssidr_el1 */
and x2, x6, #7 /* x2 <- log2(cache line size)-4 */
@@ -35,7 +36,7 @@ ENTRY(__asm_flush_dcache_level)
clz w5, w4 /* bit position of #ways */
mov x4, #0x7fff
and x4, x4, x6, lsr #13 /* x4 <- max number of #sets */
- /* x1 <- cache level << 1 */
+ /* x12 <- cache level << 1 */
/* x2 <- line length offset */
/* x3 <- number of cache ways - 1 */
/* x4 <- number of cache sets - 1 */
@@ -45,11 +46,14 @@ loop_set:
mov x6, x3 /* x6 <- working copy of #ways */
loop_way:
lsl x7, x6, x5
- orr x9, x1, x7 /* map way and level to cisw value */
+ orr x9, x12, x7 /* map way and level to cisw value */
lsl x7, x4, x2
orr x9, x9, x7 /* map set number to cisw value */
- dc cisw, x9 /* clean & invalidate by set/way */
- subs x6, x6, #1 /* decrement the way */
+ tbz w1, #0, 1f
+ dc isw, x9
+ b 2f
+1: dc cisw, x9 /* clean & invalidate by set/way */
+2: subs x6, x6, #1 /* decrement the way */
b.ge loop_way
subs x4, x4, #1 /* decrement the set */
b.ge loop_set
@@ -58,11 +62,14 @@ loop_way:
ENDPROC(__asm_flush_dcache_level)
/*
- * void __asm_flush_dcache_all(void)
+ * void __asm_flush_dcache_all(int invalidate_only)
+ *
+ * x0: 0 flush & invalidate, 1 invalidate only
*
* clean and invalidate all data cache by SET/WAY.
*/
-ENTRY(__asm_flush_dcache_all)
+ENTRY(__asm_dcache_all)
+ mov x1, x0
dsb sy
mrs x10, clidr_el1 /* read clidr_el1 */
lsr x11, x10, #24
@@ -76,13 +83,13 @@ ENTRY(__asm_flush_dcache_all)
/* x15 <- return address */
loop_level:
- lsl x1, x0, #1
- add x1, x1, x0 /* x0 <- tripled cache level */
- lsr x1, x10, x1
- and x1, x1, #7 /* x1 <- cache type */
- cmp x1, #2
+ lsl x12, x0, #1
+ add x12, x12, x0 /* x0 <- tripled cache level */
+ lsr x12, x10, x12
+ and x12, x12, #7 /* x12 <- cache type */
+ cmp x12, #2
b.lt skip /* skip if no cache or icache */
- bl __asm_flush_dcache_level
+ bl __asm_flush_dcache_level /* x1 = 0 flush, 1 invalidate */
skip:
add x0, x0, #1 /* increment cache level */
cmp x11, x0
@@ -96,8 +103,24 @@ skip:
finished:
ret
+ENDPROC(__asm_dcache_all)
+
+ENTRY(__asm_flush_dcache_all)
+ mov x16, lr
+ mov x0, #0
+ bl __asm_dcache_all
+ mov lr, x16
+ ret
ENDPROC(__asm_flush_dcache_all)
+ENTRY(__asm_invalidate_dcache_all)
+ mov x16, lr
+ mov x0, #0xffff
+ bl __asm_dcache_all
+ mov lr, x16
+ ret
+ENDPROC(__asm_invalidate_dcache_all)
+
/*
* void __asm_flush_dcache_range(start, end)
*
diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
index 7acae1b..3ce391ea 100644
--- a/arch/arm/cpu/armv8/cache_v8.c
+++ b/arch/arm/cpu/armv8/cache_v8.c
@@ -80,7 +80,7 @@ static void mmu_setup(void)
*/
void invalidate_dcache_all(void)
{
- __asm_flush_dcache_all();
+ __asm_invalidate_dcache_all();
}
/*
diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S
index e70c51d..7b9ac21 100644
--- a/arch/arm/cpu/armv8/start.S
+++ b/arch/arm/cpu/armv8/start.S
@@ -65,9 +65,9 @@ reset:
0:
/* Cache/BPB/TLB Invalidate */
- bl __asm_flush_dcache_all /* dCache clean&invalidate */
bl __asm_invalidate_icache_all /* iCache invalidate */
bl __asm_invalidate_tlb_all /* invalidate TLBs */
+ /* d-cache invalidation is done before enabling d-cache */
/* Processor specific initialization */
bl lowlevel_init
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 4178f8c..74ee9a4 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -66,6 +66,7 @@ static inline void set_sctlr(unsigned int val)
}
void __asm_flush_dcache_all(void);
+void __asm_invalidate_dcache_all(void);
void __asm_flush_dcache_range(u64 start, u64 end);
void __asm_invalidate_tlb_all(void);
void __asm_invalidate_icache_all(void);
--
1.7.9.5
next prev parent reply other threads:[~2014-02-10 21:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1392069354-24578-1-git-send-email-yorksun@freescale.com>
2014-02-10 21:58 ` [U-Boot] Fwd: [PATCH 1/3] armv8/cache: Consolidate setting for MAIR and TCR York Sun
[not found] ` <1392069354-24578-3-git-send-email-yorksun@freescale.com>
2014-02-10 21:58 ` York Sun [this message]
[not found] ` <4997fa.12c4.144296ae1fc.Coremail.fenghua@phytium.com.cn>
2014-02-13 17:29 ` [U-Boot] [PATCH 3/3] armv8/cache: Change cache invalidate and flush function York Sun
2014-02-13 3:13 ` [U-Boot] [PATCH 1/3] armv8/cache: Consolidate setting for MAIR and TCR FengHua
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52F94B9E.6090403@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.