Re: [PATCH] spi: fsl-spi: Convert to let spi core validate xfer->bits_per_word

[Andreas Larsson <andreas-FkzTOoA/JUlBDgjK7y7TUQ@public.gmane.org>]

Hi!

This patch probably also needs to make sure that bits_per_word can not 
be greater than mpc8xxx_spi->max_bits_per_word.

On 2014-02-12 15:07, Axel Lin wrote:
> Set bits_per_word_mask so spi core will reject transfers that attempt to use
> an unsupported bits_per_word value.
>
> Signed-off-by: Axel Lin <axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org>
> ---
>   drivers/spi/spi-fsl-spi.c | 8 ++------
>   1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
> index 4dcb292..28064ad 100644
> --- a/drivers/spi/spi-fsl-spi.c
> +++ b/drivers/spi/spi-fsl-spi.c
> @@ -239,12 +239,6 @@ static int fsl_spi_setup_transfer(struct spi_device *spi,
>   	if (!bits_per_word)
>   		bits_per_word = spi->bits_per_word;
>
> -	/* Make sure its a bit width we support [4..16, 32] */
> -	if ((bits_per_word < 4)
> -	    || ((bits_per_word > 16) && (bits_per_word != 32))
> -	    || (bits_per_word > mpc8xxx_spi->max_bits_per_word))

This max_bits_per_word check here...

> -		return -EINVAL;
> -
>   	if (!hz)
>   		hz = spi->max_speed_hz;
>
> @@ -631,6 +625,8 @@ static struct spi_master * fsl_spi_probe(struct device *dev,
>
>   	master->setup = fsl_spi_setup;
>   	master->cleanup = fsl_spi_cleanup;
> +	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16) |
> +				     SPI_BPW_MASK(32);

...has no corresponding logic down here.

>
>   	mpc8xxx_spi = spi_master_get_devdata(master);
>   	mpc8xxx_spi->spi_do_one_msg = fsl_spi_do_one_msg;
>


Best regards,
Andreas Larsson
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html