From: Aaron Lu <aaron.lu@intel.com>
To: Takashi Iwai <tiwai@suse.de>,
Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-acpi@vger.kernel.org,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Len Brown <lenb@kernel.org>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] Revert "ACPI / video: Add HP EliteBook Revolve 810 to the blacklist"
Date: Fri, 14 Feb 2014 22:50:44 +0800 [thread overview]
Message-ID: <52FE2D44.10006@intel.com> (raw)
In-Reply-To: <s5hy51dzr9f.wl%tiwai@suse.de>
On 02/14/2014 10:46 PM, Takashi Iwai wrote:
> At Fri, 14 Feb 2014 16:45:24 +0200,
> Mika Westerberg wrote:
>>
>> On Fri, Feb 14, 2014 at 03:16:58PM +0100, Takashi Iwai wrote:
>>> At Fri, 14 Feb 2014 16:16:52 +0200,
>>> Mika Westerberg wrote:
>>>>
>>>> On Fri, Feb 14, 2014 at 03:01:21PM +0100, Takashi Iwai wrote:
>>>>> At Fri, 14 Feb 2014 16:03:16 +0200,
>>>>> Mika Westerberg wrote:
>>>>>>
>>>>>> On Fri, Feb 14, 2014 at 02:37:00PM +0100, Takashi Iwai wrote:
>>>>>>> At Fri, 14 Feb 2014 14:34:07 +0200,
>>>>>>> Mika Westerberg wrote:
>>>>>>>>
>>>>>>>> This reverts commit e18ac62fa4b3f16234bab0d5a6627c57dbae9e7e.
>>>>>>>>
>>>>>>>> The referenced commit added HP EliteBook Revolve 810 to the ACPI video
>>>>>>>> detected blacklist so that only the native Intel backlight interface was
>>>>>>>> exported.
>>>>>>>>
>>>>>>>> However, this turned to be wrong solution after all. The ACPI video
>>>>>>>> interface works and as long as we only use that there are no problems. So
>>>>>>>> we can revert this commit and stick to use the backlight interface provided
>>>>>>>> by the ACPI video driver.
>>>>>>>>
>>>>>>>> (Using Intel native interface will not work after resume since the ACPI
>>>>>>>> video driver will restore it's state which takes control over the native
>>>>>>>> one. That's a separate thing and should be addressed in the ACPI video
>>>>>>>> driver, I suppose.)
>>>>>>>>
>>>>>>>> References: https://bugzilla.kernel.org/show_bug.cgi?id=70231
>>>>>>>> Cc: Aaron Lu <aaron.lu@intel.com>
>>>>>>>> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
>>>>>>>> ---
>>>>>>>> Rafael,
>>>>>>>>
>>>>>>>> This turned out to be misunderstanding from my side. I should have
>>>>>>>> investigated this further before submitting the original patch. Sorry about
>>>>>>>> that.
>>>>>>>>
>>>>>>>> Aaron,
>>>>>>>>
>>>>>>>> Thanks for the investigation and pointing me to the right direction (e.g to
>>>>>>>> use acpi_video0 over the native one).
>>>>>>>
>>>>>>> Could you check whether the ACPI video still really works even if you
>>>>>>> remove the recent acpi_osi blacklist entry below? It might be that
>>>>>>> BIOS changed its mind to behave more kindly as if handling for Win7.
>>>>>>>
>>>>>>>
>>>>>>> Takashi
>>>>>>>
>>>>>>> ---
>>>>>>> diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
>>>>>>> index 10e4964d051a..64d14406465d 100644
>>>>>>> --- a/drivers/acpi/blacklist.c
>>>>>>> +++ b/drivers/acpi/blacklist.c
>>>>>>> @@ -322,6 +322,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
>>>>>>> DMI_MATCH(DMI_PRODUCT_VERSION, "2349D15"),
>>>>>>> },
>>>>>>> },
>>>>>>> +#if 0
>>>>>>> {
>>>>>>> .callback = dmi_disable_osi_win8,
>>>>>>> .ident = "HP ProBook 2013 models",
>>>>>>> @@ -372,6 +373,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
>>>>>>> DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook 8780w"),
>>>>>>> },
>>>>>>> },
>>>>>>> +#endif
>>>>>>>
>>>>>>> /*
>>>>>>> * BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
>>>>>>
>>>>>> After this patch is applied, the ACPI backlight doesn't work anymore. The
>>>>>> brightness stays the same, no matter what I do.
>>>>>
>>>>> So, you need the video blacklist when acpi_osi blacklist doesn't
>>>>> exist, right?
>>>>
>>>> In my case I don't actually need video blacklist if I use only ACPI video
>>>> for backlight control. Then it works fine.
>>>
>>> Hmm, after removing acpi_osi blacklist above, you loose the ACPI video
>>> backlight doesn't work, no? If so, you need the video blacklist.
>>> Am I missing anything obvious...?
>>
>> Yes, the machine needs to be in acpi_osi blacklist then the ACPI video
>> works fine.
>
> The acpi_osi blacklist is just a workaround, and if we have better
> solutions, it should be removed. That's why I'm asking it.
>
> So, after removing acpi_osi blacklist, and keeping your video
> blacklist patch, the backlight works? If yes, as mentioned, we should
> think of rather extending this video blacklist to more EliteBook G1
> and ProBook G1 machines, and remove acpi_osi blacklist instead.
Agree.
>
> Now hp-wireless is there, so the rfkill part should work without
> acpi_osi blacklist, too.
Suppose we have some work around of making backlight work for
them in Win8 mode, it seems the acpi_osi blacklist is ready to
be removed now?
next prev parent reply other threads:[~2014-02-14 14:50 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-14 12:34 [PATCH] Revert "ACPI / video: Add HP EliteBook Revolve 810 to the blacklist" Mika Westerberg
2014-02-14 13:37 ` Takashi Iwai
2014-02-14 14:03 ` Mika Westerberg
2014-02-14 14:01 ` Takashi Iwai
2014-02-14 14:16 ` Mika Westerberg
2014-02-14 14:16 ` Takashi Iwai
2014-02-14 14:45 ` Mika Westerberg
2014-02-14 14:46 ` Takashi Iwai
2014-02-14 14:50 ` Aaron Lu [this message]
2014-02-14 14:54 ` Takashi Iwai
2014-02-14 15:26 ` Mika Westerberg
2014-02-14 22:21 ` Rafael J. Wysocki
2014-02-17 5:52 ` Aaron Lu
2014-02-17 9:56 ` Takashi Iwai
2014-02-17 13:07 ` Aaron Lu
2014-02-17 9:57 ` Mika Westerberg
2014-02-14 14:47 ` Aaron Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52FE2D44.10006@intel.com \
--to=aaron.lu@intel.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=rjw@rjwysocki.net \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.