[PATCH v8 0/4] ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU

[f.fainelli@gmail.com (Florian Fainelli)]

Hi Christian,

Le 03/02/2014 15:01, Hauke Mehrtens a ?crit :
> This adds initial support for Broadcom network SoC from the BCM5301X
> and BCM470X line.
>
> I do not have any documentation, only the vendor source code published
> by Asus and Netgear to conform with the GPL, it would be nice to get
> some documentation for this Soc like this
> https://www.broadcom.com/collateral/pg/440X-PG02-R.pdf
> for the Broadcom BCM440X Ethernet controller.
>
> With some additional patches I got Ethernet working with ~250 MBit/s.
>
> A bootlog can be found here:
> http://hauke-m.de/files/openwrt/devices/R6250/openwrt-boot-2014-01-05.txt
>
> This is based on 3.14-rc1.
>
> Christian Daudt could you please take these patches.

Christian, have you been able to get a look at those patches? How do you 
want to proceed for patches affecting bcm5301x in the future? Except for 
a few cases (Kconfig, Makefile), support for bcm5301x is orthogonal to 
the other bcm-mobile SoCs, should that be taken care of by the arm-soc 
maintainers directly?

Thanks!

>
> Changes since v7:
>   * reorder debug options
>   * rebase on 3.14-rc1
>
> Changes since v6:
>   * rebase on arm-soc.git branch next/soc
>   * use ranges in dts files for SoC blocks
>
> Changes since v5:
>   * restructured the dts files, own file for the SoC family, the SoC and
>     the device
>
> Changes since v4:
>   * removed bcm5301x_timer_init(), this function is not needed
>   * removed GENERIC_TIME this is dead
>   * made fault handler check for code and just catch the first fault.
>
> Changes since v3:
>   * rebase on Linus 3.13-rc7
>   * split the workaround into an own patch
>   * add L2 cache controller to Device tree
>   * rename config option
>   * add local-timer and SCU entry to device tree
>
> Changes since v2:
>   * use vendor prefix brcm
>   * move code to arch/arm/mach-bcm/
>   * cleanup arch/arm/mach-bcm/bcm5301x.c
>   * rename to bcm5301x
>   * split into more patches
>
> Changes since v1:
>   * add file Documentation/devicetree/bindings/arm/bcm4708.txt
>   * rename bcm5301x to bcm4708 in dts files
>   * use preprocessor includes in dts file
>   * add CONFIG_ARCH_BCM53XX to multi_v7_defconfig
>   * remove init_machine callback
>   * rename vendor prefix from brcm to bcm
>   * split into two patches
>
> Hauke Mehrtens (4):
>    ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM
>      CPU
>    ARM: BCM5301X: add early debugging support
>    ARM: BCM5301X: add dts files for BCM4708 SoC
>    ARM: BCM5301X: workaround suppress fault
>
>   Documentation/devicetree/bindings/arm/bcm4708.txt |    8 ++
>   MAINTAINERS                                       |    8 ++
>   arch/arm/Kconfig.debug                            |    7 ++
>   arch/arm/boot/dts/Makefile                        |    1 +
>   arch/arm/boot/dts/bcm4708-netgear-r6250.dts       |   35 ++++++++
>   arch/arm/boot/dts/bcm4708.dtsi                    |   34 ++++++++
>   arch/arm/boot/dts/bcm5301x.dtsi                   |   95 +++++++++++++++++++++
>   arch/arm/configs/multi_v7_defconfig               |    1 +
>   arch/arm/mach-bcm/Kconfig                         |   26 ++++++
>   arch/arm/mach-bcm/Makefile                        |    1 +
>   arch/arm/mach-bcm/bcm_5301x.c                     |   61 +++++++++++++
>   11 files changed, 277 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/arm/bcm4708.txt
>   create mode 100644 arch/arm/boot/dts/bcm4708-netgear-r6250.dts
>   create mode 100644 arch/arm/boot/dts/bcm4708.dtsi
>   create mode 100644 arch/arm/boot/dts/bcm5301x.dtsi
>   create mode 100644 arch/arm/mach-bcm/bcm_5301x.c
>