diff for duplicates of <5304E56E.9030704@overkiz.com> diff --git a/a/1.txt b/N1/1.txt index 661d71e..a87d3ee 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -110,7 +110,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + #size-cells = <1>; >>> + ranges; >>> + ->>> + tcb0: timer at fffa0000 { +>>> + tcb0: timer@fffa0000 { >>> + compatible = "atmel,at91rm9200-tcb"; >>> + reg = <0xfffa0000 0x100>; >>> + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0 @@ -118,7 +118,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + 18 IRQ_TYPE_LEVEL_HIGH 0>; >>> + }; >>> + ->>> + mmc0: mmc at fffa4000 { +>>> + mmc0: mmc@fffa4000 { >>> + compatible = "atmel,hsmci"; >>> + reg = <0xfffa4000 0x600>; >>> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; @@ -128,7 +128,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + status = "disabled"; >>> + }; >>> + ->>> + i2c0: i2c at fffa8000 { +>>> + i2c0: i2c@fffa8000 { >>> + compatible = "atmel,at91sam9260-i2c"; >>> + reg = <0xfffa8000 0x100>; >>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; @@ -137,7 +137,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + status = "disabled"; >>> + }; >>> + ->>> + i2c1: i2c at fffac000 { +>>> + i2c1: i2c@fffac000 { >>> + compatible = "atmel,at91sam9260-i2c"; >>> + reg = <0xfffac000 0x100>; >>> + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; @@ -146,7 +146,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + status = "disabled"; >>> + }; >>> + ->>> + usart0: serial at fffb0000 { +>>> + usart0: serial@fffb0000 { >>> + compatible = "atmel,at91sam9260-usart"; >>> + reg = <0xfffb0000 0x200>; >>> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; @@ -157,7 +157,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + status = "disabled"; >>> + }; >>> + ->>> + usart1: serial at fffb4000 { +>>> + usart1: serial@fffb4000 { >>> + compatible = "atmel,at91sam9260-usart"; >>> + reg = <0xfffb4000 0x200>; >>> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; @@ -168,7 +168,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + status = "disabled"; >>> + }; >>> + ->>> + usart2: serial at fffb8000 { +>>> + usart2: serial@fffb8000 { >>> + compatible = "atmel,at91sam9260-usart"; >>> + reg = <0xfffb8000 0x200>; >>> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; @@ -179,7 +179,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + status = "disabled"; >>> + }; >>> + ->>> + usart3: serial at fffbc000 { +>>> + usart3: serial@fffbc000 { >>> + compatible = "atmel,at91sam9260-usart"; >>> + reg = <0xfffbc000 0x200>; >>> + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; @@ -190,7 +190,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + status = "disabled"; >>> + }; >>> + ->>> + ssc0: ssc at fffc0000 { +>>> + ssc0: ssc@fffc0000 { >>> + compatible = "atmel,at91rm9200-ssc"; >>> + reg = <0xfffc0000 0x4000>; >>> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; @@ -200,7 +200,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + status = "disabled"; >>> + }; >>> + ->>> + ssc1: ssc at fffc4000 { +>>> + ssc1: ssc@fffc4000 { >>> + compatible = "atmel,at91rm9200-ssc"; >>> + reg = <0xfffc4000 0x4000>; >>> + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; @@ -210,7 +210,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + status = "disabled"; >>> + }; >>> + ->>> + spi0: spi at fffcc000 { +>>> + spi0: spi@fffcc000 { >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + compatible = "atmel,at91rm9200-spi"; @@ -221,7 +221,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + status = "disabled"; >>> + }; >>> + ->>> + adc0: adc at fffd0000 { +>>> + adc0: adc@fffd0000 { >>> + compatible = "atmel,at91sam9260-adc"; >>> + reg = <0xfffd0000 0x100>; >>> + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; @@ -238,40 +238,40 @@ at91sam9rl DT support, the board will boot as expected. >>> + atmel,adc-res-names = "lowres", "highres"; >>> + atmel,adc-use-res = "highres"; >>> + ->>> + trigger at 0 { +>>> + trigger@0 { >>> + trigger-name = "timer-counter-0"; >>> + trigger-value = <0x1>; >>> + }; ->>> + trigger at 1 { +>>> + trigger@1 { >>> + trigger-name = "timer-counter-1"; >>> + trigger-value = <0x3>; >>> + }; >>> + ->>> + trigger at 2 { +>>> + trigger@2 { >>> + trigger-name = "timer-counter-2"; >>> + trigger-value = <0x5>; >>> + }; >>> + ->>> + trigger at 3 { +>>> + trigger@3 { >>> + trigger-name = "external"; >>> + trigger-value = <0x13>; >>> + trigger-external; >>> + }; >>> + }; >>> + ->>> + usb0: gadget at fffd4000 { +>>> + usb0: gadget@fffd4000 { >>> + compatible = "atmel,at91rm9200-udc"; >>> + reg = <0xfffd4000 0x4000>; >>> + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; >>> + status = "disabled"; >>> + }; >>> + ->>> + ramc0: ramc at ffffea00 { +>>> + ramc0: ramc@ffffea00 { >>> + compatible = "atmel,at91sam9260-sdramc"; >>> + reg = <0xffffea00 0x200>; >>> + }; >>> + ->>> + aic: interrupt-controller at fffff000 { +>>> + aic: interrupt-controller@fffff000 { >>> + #interrupt-cells = <3>; >>> + compatible = "atmel,at91rm9200-aic"; >>> + interrupt-controller; @@ -279,7 +279,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + atmel,external-irqs = <31>; >>> + }; >>> + ->>> + dbgu: serial at fffff200 { +>>> + dbgu: serial@fffff200 { >>> + compatible = "atmel,at91sam9260-usart"; >>> + reg = <0xfffff200 0x200>; >>> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; @@ -288,7 +288,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + status = "disabled"; >>> + }; >>> + ->>> + pinctrl at fffff400 { +>>> + pinctrl@fffff400 { >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + compatible = "atmel,at91rm9200-pinctrl", @@ -634,7 +634,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + }; >>> + }; >>> + ->>> + pioA: gpio at fffff400 { +>>> + pioA: gpio@fffff400 { >>> + compatible = >>> "atmel,at91rm9200-gpio"; >>> + reg = <0xfffff400 0x200>; @@ -646,7 +646,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + #interrupt-cells = <2>; >>> + }; >>> + ->>> + pioB: gpio at fffff600 { +>>> + pioB: gpio@fffff600 { >>> + compatible = >>> "atmel,at91rm9200-gpio"; >>> + reg = <0xfffff600 0x200>; @@ -658,7 +658,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + #interrupt-cells = <2>; >>> + }; >>> + ->>> + pioC: gpio at fffff800 { +>>> + pioC: gpio@fffff800 { >>> + compatible = >>> "atmel,at91rm9200-gpio"; >>> + reg = <0xfffff800 0x200>; @@ -670,7 +670,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + #interrupt-cells = <2>; >>> + }; >>> + ->>> + pioD: gpio at fffffa00 { +>>> + pioD: gpio@fffffa00 { >>> + compatible = >>> "atmel,at91rm9200-gpio"; >>> + reg = <0xfffffa00 0x200>; @@ -683,28 +683,28 @@ at91sam9rl DT support, the board will boot as expected. >>> + }; >>> + }; >>> + ->>> + pmc: pmc at fffffc00 { +>>> + pmc: pmc@fffffc00 { >>> + compatible = "atmel,at91rm9200-pmc"; >>> + reg = <0xfffffc00 0x100>; >>> + }; >>> + ->>> + rstc at fffffd00 { +>>> + rstc@fffffd00 { >>> + compatible = "atmel,at91sam9260-rstc"; >>> + reg = <0xfffffd00 0x10>; >>> + }; >>> + ->>> + shdwc at fffffd10 { +>>> + shdwc@fffffd10 { >>> + compatible = "atmel,at91sam9260-shdwc"; >>> + reg = <0xfffffd10 0x10>; >>> + }; >>> + ->>> + pit: timer at fffffd30 { +>>> + pit: timer@fffffd30 { >>> + compatible = "atmel,at91sam9260-pit"; >>> + reg = <0xfffffd30 0xf>; >>> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; >>> + }; >>> + ->>> + watchdog at fffffd40 { +>>> + watchdog@fffffd40 { >>> + compatible = "atmel,at91sam9260-wdt"; >>> + reg = <0xfffffd40 0x10>; >>> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; @@ -712,7 +712,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + }; >>> + }; >>> + ->>> + nand0: nand at 40000000 { +>>> + nand0: nand@40000000 { >>> + compatible = "atmel,at91rm9200-nand"; >>> + #address-cells = <1>; >>> + #size-cells = <1>; @@ -731,7 +731,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + }; >>> + }; >>> + ->>> + i2c at 0 { +>>> + i2c@0 { >>> + compatible = "i2c-gpio"; >>> + gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */ >>> + &pioA 24 GPIO_ACTIVE_HIGH /* scl */ @@ -746,7 +746,7 @@ at91sam9rl DT support, the board will boot as expected. >>> + status = "disabled"; >>> + }; >>> + ->>> + i2c at 1 { +>>> + i2c@1 { >>> + compatible = "i2c-gpio"; >>> + gpios = <&pioD 10 GPIO_ACTIVE_HIGH /* sda */ >>> + &pioD 11 GPIO_ACTIVE_HIGH /* scl */ @@ -798,5 +798,5 @@ at91sam9rl DT support, the board will boot as expected. >> >> _______________________________________________ >> linux-arm-kernel mailing list ->> linux-arm-kernel at lists.infradead.org +>> linux-arm-kernel@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel diff --git a/a/content_digest b/N1/content_digest index 173e9c8..7ade0f2 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -2,10 +2,17 @@ "ref\01392823951-26053-2-git-send-email-alexandre.belloni@free-electrons.com\0" "ref\05304D540.50100@overkiz.com\0" "ref\0CACh+v5NpKUJ6gB7J+Z95-_5GRZy8hoFjSY-_vaFKJB4i=GjesA@mail.gmail.com\0" - "From\0b.brezillon@overkiz.com (Boris BREZILLON)\0" - "Subject\0[PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support\0" + "From\0Boris BREZILLON <b.brezillon@overkiz.com>\0" + "Subject\0Re: [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support\0" "Date\0Wed, 19 Feb 2014 18:10:06 +0100\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Jean-Jacques Hiblot <jjhiblot@gmail.com>\0" + "Cc\0Alexandre Belloni <alexandre.belloni@free-electrons.com>" + Nicolas Ferre <nicolas.ferre@atmel.com> + Gregory Clement <gregory.clement@free-electrons.com> + Maxime Ripard <maxime.ripard@free-electrons.com> + Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> + Linux Kernel Mailing List <linux-kernel@vger.kernel.org> + " linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org>\0" "\00:1\0" "b\0" "On 19/02/2014 17:19, Jean-Jacques Hiblot wrote:\n" @@ -120,7 +127,7 @@ ">>> + #size-cells = <1>;\n" ">>> + ranges;\n" ">>> +\n" - ">>> + tcb0: timer at fffa0000 {\n" + ">>> + tcb0: timer@fffa0000 {\n" ">>> + compatible = \"atmel,at91rm9200-tcb\";\n" ">>> + reg = <0xfffa0000 0x100>;\n" ">>> + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0\n" @@ -128,7 +135,7 @@ ">>> + 18 IRQ_TYPE_LEVEL_HIGH 0>;\n" ">>> + };\n" ">>> +\n" - ">>> + mmc0: mmc at fffa4000 {\n" + ">>> + mmc0: mmc@fffa4000 {\n" ">>> + compatible = \"atmel,hsmci\";\n" ">>> + reg = <0xfffa4000 0x600>;\n" ">>> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;\n" @@ -138,7 +145,7 @@ ">>> + status = \"disabled\";\n" ">>> + };\n" ">>> +\n" - ">>> + i2c0: i2c at fffa8000 {\n" + ">>> + i2c0: i2c@fffa8000 {\n" ">>> + compatible = \"atmel,at91sam9260-i2c\";\n" ">>> + reg = <0xfffa8000 0x100>;\n" ">>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;\n" @@ -147,7 +154,7 @@ ">>> + status = \"disabled\";\n" ">>> + };\n" ">>> +\n" - ">>> + i2c1: i2c at fffac000 {\n" + ">>> + i2c1: i2c@fffac000 {\n" ">>> + compatible = \"atmel,at91sam9260-i2c\";\n" ">>> + reg = <0xfffac000 0x100>;\n" ">>> + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;\n" @@ -156,7 +163,7 @@ ">>> + status = \"disabled\";\n" ">>> + };\n" ">>> +\n" - ">>> + usart0: serial at fffb0000 {\n" + ">>> + usart0: serial@fffb0000 {\n" ">>> + compatible = \"atmel,at91sam9260-usart\";\n" ">>> + reg = <0xfffb0000 0x200>;\n" ">>> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;\n" @@ -167,7 +174,7 @@ ">>> + status = \"disabled\";\n" ">>> + };\n" ">>> +\n" - ">>> + usart1: serial at fffb4000 {\n" + ">>> + usart1: serial@fffb4000 {\n" ">>> + compatible = \"atmel,at91sam9260-usart\";\n" ">>> + reg = <0xfffb4000 0x200>;\n" ">>> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;\n" @@ -178,7 +185,7 @@ ">>> + status = \"disabled\";\n" ">>> + };\n" ">>> +\n" - ">>> + usart2: serial at fffb8000 {\n" + ">>> + usart2: serial@fffb8000 {\n" ">>> + compatible = \"atmel,at91sam9260-usart\";\n" ">>> + reg = <0xfffb8000 0x200>;\n" ">>> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;\n" @@ -189,7 +196,7 @@ ">>> + status = \"disabled\";\n" ">>> + };\n" ">>> +\n" - ">>> + usart3: serial at fffbc000 {\n" + ">>> + usart3: serial@fffbc000 {\n" ">>> + compatible = \"atmel,at91sam9260-usart\";\n" ">>> + reg = <0xfffbc000 0x200>;\n" ">>> + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;\n" @@ -200,7 +207,7 @@ ">>> + status = \"disabled\";\n" ">>> + };\n" ">>> +\n" - ">>> + ssc0: ssc at fffc0000 {\n" + ">>> + ssc0: ssc@fffc0000 {\n" ">>> + compatible = \"atmel,at91rm9200-ssc\";\n" ">>> + reg = <0xfffc0000 0x4000>;\n" ">>> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;\n" @@ -210,7 +217,7 @@ ">>> + status = \"disabled\";\n" ">>> + };\n" ">>> +\n" - ">>> + ssc1: ssc at fffc4000 {\n" + ">>> + ssc1: ssc@fffc4000 {\n" ">>> + compatible = \"atmel,at91rm9200-ssc\";\n" ">>> + reg = <0xfffc4000 0x4000>;\n" ">>> + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;\n" @@ -220,7 +227,7 @@ ">>> + status = \"disabled\";\n" ">>> + };\n" ">>> +\n" - ">>> + spi0: spi at fffcc000 {\n" + ">>> + spi0: spi@fffcc000 {\n" ">>> + #address-cells = <1>;\n" ">>> + #size-cells = <0>;\n" ">>> + compatible = \"atmel,at91rm9200-spi\";\n" @@ -231,7 +238,7 @@ ">>> + status = \"disabled\";\n" ">>> + };\n" ">>> +\n" - ">>> + adc0: adc at fffd0000 {\n" + ">>> + adc0: adc@fffd0000 {\n" ">>> + compatible = \"atmel,at91sam9260-adc\";\n" ">>> + reg = <0xfffd0000 0x100>;\n" ">>> + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;\n" @@ -248,40 +255,40 @@ ">>> + atmel,adc-res-names = \"lowres\", \"highres\";\n" ">>> + atmel,adc-use-res = \"highres\";\n" ">>> +\n" - ">>> + trigger at 0 {\n" + ">>> + trigger@0 {\n" ">>> + trigger-name = \"timer-counter-0\";\n" ">>> + trigger-value = <0x1>;\n" ">>> + };\n" - ">>> + trigger at 1 {\n" + ">>> + trigger@1 {\n" ">>> + trigger-name = \"timer-counter-1\";\n" ">>> + trigger-value = <0x3>;\n" ">>> + };\n" ">>> +\n" - ">>> + trigger at 2 {\n" + ">>> + trigger@2 {\n" ">>> + trigger-name = \"timer-counter-2\";\n" ">>> + trigger-value = <0x5>;\n" ">>> + };\n" ">>> +\n" - ">>> + trigger at 3 {\n" + ">>> + trigger@3 {\n" ">>> + trigger-name = \"external\";\n" ">>> + trigger-value = <0x13>;\n" ">>> + trigger-external;\n" ">>> + };\n" ">>> + };\n" ">>> +\n" - ">>> + usb0: gadget at fffd4000 {\n" + ">>> + usb0: gadget@fffd4000 {\n" ">>> + compatible = \"atmel,at91rm9200-udc\";\n" ">>> + reg = <0xfffd4000 0x4000>;\n" ">>> + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;\n" ">>> + status = \"disabled\";\n" ">>> + };\n" ">>> +\n" - ">>> + ramc0: ramc at ffffea00 {\n" + ">>> + ramc0: ramc@ffffea00 {\n" ">>> + compatible = \"atmel,at91sam9260-sdramc\";\n" ">>> + reg = <0xffffea00 0x200>;\n" ">>> + };\n" ">>> +\n" - ">>> + aic: interrupt-controller at fffff000 {\n" + ">>> + aic: interrupt-controller@fffff000 {\n" ">>> + #interrupt-cells = <3>;\n" ">>> + compatible = \"atmel,at91rm9200-aic\";\n" ">>> + interrupt-controller;\n" @@ -289,7 +296,7 @@ ">>> + atmel,external-irqs = <31>;\n" ">>> + };\n" ">>> +\n" - ">>> + dbgu: serial at fffff200 {\n" + ">>> + dbgu: serial@fffff200 {\n" ">>> + compatible = \"atmel,at91sam9260-usart\";\n" ">>> + reg = <0xfffff200 0x200>;\n" ">>> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;\n" @@ -298,7 +305,7 @@ ">>> + status = \"disabled\";\n" ">>> + };\n" ">>> +\n" - ">>> + pinctrl at fffff400 {\n" + ">>> + pinctrl@fffff400 {\n" ">>> + #address-cells = <1>;\n" ">>> + #size-cells = <1>;\n" ">>> + compatible = \"atmel,at91rm9200-pinctrl\",\n" @@ -644,7 +651,7 @@ ">>> + };\n" ">>> + };\n" ">>> +\n" - ">>> + pioA: gpio at fffff400 {\n" + ">>> + pioA: gpio@fffff400 {\n" ">>> + compatible =\n" ">>> \"atmel,at91rm9200-gpio\";\n" ">>> + reg = <0xfffff400 0x200>;\n" @@ -656,7 +663,7 @@ ">>> + #interrupt-cells = <2>;\n" ">>> + };\n" ">>> +\n" - ">>> + pioB: gpio at fffff600 {\n" + ">>> + pioB: gpio@fffff600 {\n" ">>> + compatible =\n" ">>> \"atmel,at91rm9200-gpio\";\n" ">>> + reg = <0xfffff600 0x200>;\n" @@ -668,7 +675,7 @@ ">>> + #interrupt-cells = <2>;\n" ">>> + };\n" ">>> +\n" - ">>> + pioC: gpio at fffff800 {\n" + ">>> + pioC: gpio@fffff800 {\n" ">>> + compatible =\n" ">>> \"atmel,at91rm9200-gpio\";\n" ">>> + reg = <0xfffff800 0x200>;\n" @@ -680,7 +687,7 @@ ">>> + #interrupt-cells = <2>;\n" ">>> + };\n" ">>> +\n" - ">>> + pioD: gpio at fffffa00 {\n" + ">>> + pioD: gpio@fffffa00 {\n" ">>> + compatible =\n" ">>> \"atmel,at91rm9200-gpio\";\n" ">>> + reg = <0xfffffa00 0x200>;\n" @@ -693,28 +700,28 @@ ">>> + };\n" ">>> + };\n" ">>> +\n" - ">>> + pmc: pmc at fffffc00 {\n" + ">>> + pmc: pmc@fffffc00 {\n" ">>> + compatible = \"atmel,at91rm9200-pmc\";\n" ">>> + reg = <0xfffffc00 0x100>;\n" ">>> + };\n" ">>> +\n" - ">>> + rstc at fffffd00 {\n" + ">>> + rstc@fffffd00 {\n" ">>> + compatible = \"atmel,at91sam9260-rstc\";\n" ">>> + reg = <0xfffffd00 0x10>;\n" ">>> + };\n" ">>> +\n" - ">>> + shdwc at fffffd10 {\n" + ">>> + shdwc@fffffd10 {\n" ">>> + compatible = \"atmel,at91sam9260-shdwc\";\n" ">>> + reg = <0xfffffd10 0x10>;\n" ">>> + };\n" ">>> +\n" - ">>> + pit: timer at fffffd30 {\n" + ">>> + pit: timer@fffffd30 {\n" ">>> + compatible = \"atmel,at91sam9260-pit\";\n" ">>> + reg = <0xfffffd30 0xf>;\n" ">>> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;\n" ">>> + };\n" ">>> +\n" - ">>> + watchdog at fffffd40 {\n" + ">>> + watchdog@fffffd40 {\n" ">>> + compatible = \"atmel,at91sam9260-wdt\";\n" ">>> + reg = <0xfffffd40 0x10>;\n" ">>> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;\n" @@ -722,7 +729,7 @@ ">>> + };\n" ">>> + };\n" ">>> +\n" - ">>> + nand0: nand at 40000000 {\n" + ">>> + nand0: nand@40000000 {\n" ">>> + compatible = \"atmel,at91rm9200-nand\";\n" ">>> + #address-cells = <1>;\n" ">>> + #size-cells = <1>;\n" @@ -741,7 +748,7 @@ ">>> + };\n" ">>> + };\n" ">>> +\n" - ">>> + i2c at 0 {\n" + ">>> + i2c@0 {\n" ">>> + compatible = \"i2c-gpio\";\n" ">>> + gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */\n" ">>> + &pioA 24 GPIO_ACTIVE_HIGH /* scl */\n" @@ -756,7 +763,7 @@ ">>> + status = \"disabled\";\n" ">>> + };\n" ">>> +\n" - ">>> + i2c at 1 {\n" + ">>> + i2c@1 {\n" ">>> + compatible = \"i2c-gpio\";\n" ">>> + gpios = <&pioD 10 GPIO_ACTIVE_HIGH /* sda */\n" ">>> + &pioD 11 GPIO_ACTIVE_HIGH /* scl */\n" @@ -808,7 +815,7 @@ ">>\n" ">> _______________________________________________\n" ">> linux-arm-kernel mailing list\n" - ">> linux-arm-kernel at lists.infradead.org\n" + ">> linux-arm-kernel@lists.infradead.org\n" >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -06d445def93cdfe9f4f411f564216a6ee826937e1b228fefff8ca0770a9cf6b4 +9570fee5cfa6efdc26f5f64062bb8c15f119463a09b58a74b5d238578a0d4181
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.