Re: USB to Serial converter code pl2303

[Karsten Malcher <debian-QdlBTFngBEMsCylrc8G9yg@public.gmane.org>]

Am 19.02.2014 18:14, schrieb Johan Hovold:
> On Wed, Feb 19, 2014 at 06:05:54PM +0100, Karsten Malcher wrote:
>> Am 19.02.2014 18:00, schrieb Johan Hovold:
>>> I need an adapter that can handle 2400 Baud to talk to the
>>> ft639/ede639 servo controller chip or possibly a pl2303 driver
>>> that is improved.
>>> The pl2303-driver can handle 2400 baud, but not sure exactly what baud
>>> rates are available for a cloned/pirated pl2303 chip (if that is what
>>> you've got). 115200 baud should be supported, though.
>> We have tested different baud rates with the PL2303HX china clones.
>> All are working including non standard baud rates.
> Ok, good, so 2400 baud should work.

Yes - this should be no problem with every usb converter.
I have different one and all of them are usable now.

>
>> But the non standard baud rates are only available with the modified
>> driver from Frank Schäfer.
> What driver is that? The latest clone-related patch from Frank that I've
> seen stated:
>
> 	"According to Prolific, several (unauthorized) cheap and less
> 	 functional clones of the PL2303HX chip are in circulation. [1]
> 	 I've had the chance to test such a cloned device and it turned
> 	 out that it doesn't support any baud rates above 115200 baud
> 	 (original: 6 Mbaud) It also doesn't support the divisior based
> 	 baud rate encoding method, so no continuous baud rate adjustment
> 	 is possible."

That's a good question.
He send me a special debug version that gives all registers of the PL2303HX after the plugin.
I think it is better when Frank directly suffer us with his latest version.

Cheers
Karsten

>
> Thanks,
> Johan

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html