[PATCH 1/4] ARM: Kirkwood: Add audio node to kirkwood.dtsi

[sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)]

Hello.

On 23-02-2014 21:19, Andrew Lunn wrote:

> The binding has existed for a while, so add the missing node so it can
> be used by devices.

> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> ---
>   arch/arm/boot/dts/kirkwood.dtsi | 9 +++++++++
>   1 file changed, 9 insertions(+)

> diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
> index 7b921b30cfcb..841ca3affbf5 100644
> --- a/arch/arm/boot/dts/kirkwood.dtsi
> +++ b/arch/arm/boot/dts/kirkwood.dtsi
> @@ -310,5 +310,14 @@
>   			#phy-cells = <0>;
>   			status = "ok";
>   		};
> +
> +                audio0: audio-controller at a0000 {
> +			compatible = "marvell,kirkwood-audio";
> +                        reg = <0xa0000 0x2210>;
> +                        interrupts = <24>;
> +                        clocks = <&gate_clk 9>;
> +                        clock-names = "internal";
> +                        status = "disabled";
> +                };

     Could you uniformly indent the node with tabs (like at least the one 
above it)?

WBR, Sergei