From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.candelatech.com ([208.74.158.172] helo=ns3.lanforge.com) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WI5G7-0006bY-Ta for ath10k@lists.infradead.org; Mon, 24 Feb 2014 23:48:28 +0000 Message-ID: <530BDA2A.1040301@candelatech.com> Date: Mon, 24 Feb 2014 15:47:54 -0800 From: Ben Greear MIME-Version: 1.0 Subject: Re: Anyone have luck with WLE900VX? References: <5307F7D3.1030703@candelatech.com> <5308F894.7030608@candelatech.com> In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: Adrian Chadd Cc: Yeoh Chun-Yeow , ath10k On 02/22/2014 11:24 AM, Adrian Chadd wrote: > Check the firmware source; the MAC is read out of caldata and I > believe the default is (random three digits) + 12:34:56 > > So maybe the board didn't reset fully and the OTP or EEPROM didn't > load? You should be able to read the OTP data via the memory mapped > registers exposed to the host, as long as you know how to read OTP. > :-P Looks like my problem is just old firmware that does not have the EEPROM reference tables needed by the WLE900VX. But, if I hack on the OTP logic and make it use a reference table for the reference design the NIC claims (XB140), then the NIC does show up as 3x3, and gets proper MAC, etc. This is a nasty hack, but maybe it will hold me over until I can get access to a more proper solution. Thanks, Ben -- Ben Greear Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k