From: Fariya Fatima <fariya.f@redpinesignals.com>
To: linux-wireless@vger.kernel.org
Subject: [PATCH 3.14.0-rc4 v2 2/10] rsi: Adding remaining header files
Date: Tue, 25 Feb 2014 21:53:52 +0530 [thread overview]
Message-ID: <530CC398.5000302@redpinesignals.com> (raw)
From: Fariya Fatima
This patch adds the remaining header files.
Signed-off-by: Fariya Fatima <fariya.f@redpinesignals.com>
---
rsi_device_ops.h | 56 +++++++++++
rsi_mgmt.h | 257 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 313 insertions(+)
diff -rupN linux-3.14-rc4/drivers/net/wireless/rsi/rsi_device_ops.h linux-3.14-rc4_new/drivers/net/wireless/rsi/rsi_device_ops.h
--- linux-3.14-rc4/drivers/net/wireless/rsi/rsi_device_ops.h 1970-01-01 05:30:00.000000000 +0530
+++ linux-3.14-rc4_new/drivers/net/wireless/rsi/rsi_device_ops.h 2014-02-25 14:44:29.812692943 +0530
@@ -0,0 +1,56 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_DEVICE_OPS_H__
+#define __RSI_DEVICE_OPS_H__
+
+#define EVENT_WAIT_FOREVER 0
+#define TA_LOAD_ADDRESS 0x00
+#define FIRMWARE_RSI9113 "rsi_91x.fw"
+
+static inline u32 rsi_get_queueno(u8 *addr, u16 offset)
+{
+ return (le16_to_cpu(*(u16 *)&addr[offset]) & 0x7000) >> 12;
+}
+
+static inline u32 rsi_get_length(u8 *addr, u16 offset)
+{
+ return (le16_to_cpu(*(u16 *)&addr[offset])) & 0x0fff;
+}
+
+static inline u8 rsi_get_extended_desc(u8 *addr, u16 offset)
+{
+ return (le16_to_cpu(*(u8 *)&addr[offset + 4])) & 0x00ff;
+}
+
+static inline u8 rsi_get_rssi(u8 *addr)
+{
+ return *(u8 *)(addr + FRAME_DESC_SZ);
+}
+
+static inline u8 rsi_get_channel(u8 *addr)
+{
+ return *(char *)(addr + 15);
+}
+
+void rsi_mac80211_detach(struct rsi_hw *hw);
+u16 rsi_get_connected_channel(struct rsi_hw *adapter);
+void rsi_set_event(struct rsi_event *event);
+struct rsi_hw *rsi_init_os_intf_ops(enum rsi_91x_intf intf);
+int rsi_init_thread_ops(struct rsi_common *common, enum rsi_91x_intf intf);
+void rsi_deinit_os_intf_ops(struct rsi_hw *adapter);
+int rsi_read_pkt(struct rsi_common *common, u32 rcv_pkt_len);
+#endif
diff -rupN linux-3.14-rc4/drivers/net/wireless/rsi/rsi_mgmt.h linux-3.14-rc4_new/drivers/net/wireless/rsi/rsi_mgmt.h
--- linux-3.14-rc4/drivers/net/wireless/rsi/rsi_mgmt.h 1970-01-01 05:30:00.000000000 +0530
+++ linux-3.14-rc4_new/drivers/net/wireless/rsi/rsi_mgmt.h 2014-02-25 14:44:29.812692943 +0530
@@ -0,0 +1,257 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_MGMT_H__
+#define __RSI_MGMT_H__
+
+#include <linux/sort.h>
+#include "rsi_boot_params.h"
+
+#define MAX_MGMT_PKT_SIZE 512
+#define RSI_NEEDED_HEADROOM 80
+#define RSI_RCV_BUFFER_LEN 2000
+
+#define RSI_11B_MODE 0
+#define RSI_11G_MODE BIT(7)
+#define RETRY_COUNT 8
+#define RETRY_LONG 4
+#define RETRY_SHORT 7
+#define WMM_SHORT_SLOT_TIME 9
+#define SIFS_DURATION 16
+
+#define KEY_TYPE_CLEAR 0
+#define RSI_PAIRWISE_KEY 1
+#define RSI_GROUP_KEY 2
+
+/* EPPROM_READ_ADDRESS */
+#define WLAN_MAC_EEPROM_ADDR 40
+#define WLAN_MAC_MAGIC_WORD_LEN 0x01
+#define WLAN_HOST_MODE_LEN 0x04
+#define WLAN_FW_VERSION_LEN 0x08
+#define MAGIC_WORD 0x5A
+
+/* Receive Frame Types */
+#define TA_CONFIRM_TYPE 0x01
+#define RX_DOT11_MGMT 0x02
+#define TX_STATUS_IND 0x04
+#define PROBEREQ_CONFIRM 2
+#define CARD_READY_IND 0x00
+
+#define RSI_DELETE_PEER 0x0
+#define RSI_ADD_PEER 0x1
+#define START_AMPDU_AGGR 0x1
+#define STOP_AMPDU_AGGR 0x0
+#define INTERNAL_MGMT_PKT 0x99
+
+#define PUT_BBP_RESET 0
+#define BBP_REG_WRITE 0
+#define RF_RESET_ENABLE BIT(3)
+#define RATE_INFO_ENABLE BIT(0)
+#define RSI_BROADCAST_PKT BIT(9)
+
+#define UPPER_20_ENABLE (0x2 << 12)
+#define LOWER_20_ENABLE (0x4 << 12)
+#define FULL40M_ENABLE 0x6
+
+#define RSI_LMAC_CLOCK_80MHZ 0x1
+#define RSI_ENABLE_40MHZ (0x1 << 3)
+
+#define RX_BA_INDICATION 1
+#define RSI_TBL_SZ 40
+#define MAX_RETRIES 8
+
+#define STD_RATE_MCS7 0x07
+#define STD_RATE_MCS6 0x06
+#define STD_RATE_MCS5 0x05
+#define STD_RATE_MCS4 0x04
+#define STD_RATE_MCS3 0x03
+#define STD_RATE_MCS2 0x02
+#define STD_RATE_MCS1 0x01
+#define STD_RATE_MCS0 0x00
+#define STD_RATE_54 0x6c
+#define STD_RATE_48 0x60
+#define STD_RATE_36 0x48
+#define STD_RATE_24 0x30
+#define STD_RATE_18 0x24
+#define STD_RATE_12 0x18
+#define STD_RATE_11 0x16
+#define STD_RATE_09 0x12
+#define STD_RATE_06 0x0C
+#define STD_RATE_5_5 0x0B
+#define STD_RATE_02 0x04
+#define STD_RATE_01 0x02
+
+#define RSI_RF_TYPE 1
+#define RSI_RATE_00 0x00
+#define RSI_RATE_1 0x0
+#define RSI_RATE_2 0x2
+#define RSI_RATE_5_5 0x4
+#define RSI_RATE_11 0x6
+#define RSI_RATE_6 0x8b
+#define RSI_RATE_9 0x8f
+#define RSI_RATE_12 0x8a
+#define RSI_RATE_18 0x8e
+#define RSI_RATE_24 0x89
+#define RSI_RATE_36 0x8d
+#define RSI_RATE_48 0x88
+#define RSI_RATE_54 0x8c
+#define RSI_RATE_MCS0 0x100
+#define RSI_RATE_MCS1 0x101
+#define RSI_RATE_MCS2 0x102
+#define RSI_RATE_MCS3 0x103
+#define RSI_RATE_MCS4 0x104
+#define RSI_RATE_MCS5 0x105
+#define RSI_RATE_MCS6 0x106
+#define RSI_RATE_MCS7 0x107
+#define RSI_RATE_MCS7_SG 0x307
+
+#define BW_20MHZ 0
+#define BW_40MHZ 1
+
+#define RX 0
+#define TX 1
+
+#define RSI_MODE_STA 1
+
+extern struct ieee80211_rate rsi_rates[12];
+extern const u16 rsi_mcsrates[8];
+
+enum sta_notify_events {
+ STA_CONNECTED = 0,
+ STA_DISCONNECTED,
+ STA_TX_ADDBA_DONE,
+ STA_TX_DELBA,
+ STA_RX_ADDBA_DONE,
+ STA_RX_DELBA
+};
+
+/* Send Frames Types */
+enum cmd_frame_type {
+ TX_DOT11_MGMT,
+ RESET_MAC_REQ,
+ RADIO_CAPABILITIES,
+ BB_PROG_VALUES_REQUEST,
+ RF_PROG_VALUES_REQUEST,
+ WAKEUP_SLEEP_REQUEST,
+ SCAN_REQUEST,
+ TSF_UPDATE,
+ PEER_NOTIFY,
+ BLOCK_UNBLOCK,
+ SET_KEY_REQ,
+ AUTO_RATE_IND,
+ BOOTUP_PARAMS_REQUEST,
+ VAP_CAPABILITIES,
+ EEPROM_READ_TYPE ,
+ EEPROM_WRITE,
+ GPIO_PIN_CONFIG ,
+ SET_RX_FILTER,
+ AMPDU_IND,
+ STATS_REQUEST_FRAME,
+ BB_BUF_PROG_VALUES_REQ,
+ BBP_PROG_IN_TA,
+ BG_SCAN_PARAMS,
+ BG_SCAN_PROBE_REQ,
+ CW_MODE_REQ,
+ PER_CMD_PKT
+};
+
+struct rsi_mac_frame {
+ __le16 desc_word[8];
+} __packed;
+
+struct rsi_boot_params {
+ __le16 desc_word[8];
+ struct bootup_params bootup_params;
+} __packed;
+
+struct rsi_peer_notify {
+ __le16 desc_word[8];
+ u8 mac_addr[6];
+ __le16 command;
+ __le16 mpdu_density;
+ __le16 reserved;
+ __le32 sta_flags;
+} __packed;
+
+struct rsi_vap_caps {
+ __le16 desc_word[8];
+ u8 mac_addr[6];
+ __le16 keep_alive_period;
+ u8 bssid[6];
+ __le16 reserved;
+ __le32 flags;
+ __le16 frag_threshold;
+ __le16 rts_threshold;
+ __le32 default_mgmt_rate;
+ __le32 default_ctrl_rate;
+ __le32 default_data_rate;
+ __le16 beacon_interval;
+ __le16 dtim_period;
+} __packed;
+
+struct rsi_set_key {
+ __le16 desc_word[8];
+ u8 key[4][32];
+ u8 tx_mic_key[8];
+ u8 rx_mic_key[8];
+} __packed;
+
+struct rsi_auto_rate {
+ __le16 desc_word[8];
+ __le16 failure_limit;
+ __le16 initial_boundary;
+ __le16 max_threshold_limt;
+ __le16 num_supported_rates;
+ __le16 aarf_rssi;
+ __le16 moderate_rate_inx;
+ __le16 collision_tolerance;
+ __le16 supported_rates[40];
+} __packed;
+
+struct qos_params {
+ __le16 cont_win_min_q;
+ __le16 cont_win_max_q;
+ __le16 aifsn_val_q;
+ __le16 txop_q;
+} __packed;
+
+struct rsi_radio_caps {
+ __le16 desc_word[8];
+ struct qos_params qos_params[MAX_HW_QUEUES];
+ u8 num_11n_rates;
+ u8 num_11ac_rates;
+ __le16 gcpd_per_rate[20];
+} __packed;
+
+int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg);
+int rsi_set_vap_capabilities(struct rsi_common *common, u32 opmode);
+int rsi_send_ampdu_indication_frame(struct rsi_common *common, u16 tid,
+ u16 ssn, u8 buf_size, u8 event);
+int rsi_hal_load_key(struct rsi_common *common, u8 *data, u16 key_len,
+ u8 key_type, u8 key_id, u32 cipher);
+int rsi_set_channel(struct rsi_common *common, u16 chno);
+void rsi_inform_bss_status(struct rsi_common *common, u8 status,
+ const u8 *bssid, u8 qos_enable, u16 aid);
+void rsi_indicate_pkt_to_os(struct rsi_common *common, struct sk_buff *skb);
+int rsi_mac80211_attach(struct rsi_common *common);
+void rsi_indicate_tx_status(struct rsi_hw *common, struct sk_buff *skb,
+ int status);
+bool rsi_is_cipher_wep(struct rsi_common *common);
+void rsi_core_qos_processor(struct rsi_common *common);
+int rsi_core_xmit(struct rsi_common *common, struct sk_buff *skb);
+int rsi_send_mgmt_pkt(struct rsi_common *common, struct sk_buff *skb);
+int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb);
+#endif
reply other threads:[~2014-02-25 16:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=530CC398.5000302@redpinesignals.com \
--to=fariya.f@redpinesignals.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.