From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.candelatech.com ([208.74.158.172] helo=ns3.lanforge.com) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WInBO-0002Zx-Tq for ath10k@lists.infradead.org; Wed, 26 Feb 2014 22:42:31 +0000 Message-ID: <530E6DBF.4060407@candelatech.com> Date: Wed, 26 Feb 2014 14:42:07 -0800 From: Ben Greear MIME-Version: 1.0 Subject: Re: Anyone have a working hostapd conf file for AC? References: <530D128B.3030509@candelatech.com> <87sir5kc5t.fsf@kamboji.qca.qualcomm.com> <530E2873.8000506@candelatech.com> In-Reply-To: <530E2873.8000506@candelatech.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: Kalle Valo Cc: ath10k For completeness, I'm adding the config that works for me below. With this I can get around 380Mbps TCP throughput downloading, over the air, using the .467 firmware. I have not yet tried to do any significant tuning to improve this throughput. Part of my earlier problems was that I had a patch to ath10k that enabled raw rx mode, and that at least partially breaks AP mode (I think standard firmware probably cannot deal with tx mode of different type from rx mode). I just fixed my code to not enable that feature on standard firmware. interface=vap1 driver=nl80211 logger_syslog=-1 logger_syslog_level=2 logger_stdout=-1 logger_stdout_level=2 dump_file=/home/lanforge/wifi/hostapd_vap1.dump ctrl_interface=/var/run/hostapd ctrl_interface_group=0 ssid=ben-ath10k bssid=00:2e:ec:56:6c:95 country_code=US ieee80211d=0 hw_mode=a ieee80211n=1 ieee80211ac=1 beacon_int=240 dtim_period=2 max_num_sta=2007 rts_threshold=2347 fragm_threshold=2346 preamble=0 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 # Enable HT modes if you want 300Mbps+ throughput. #ht_capab=[HT20][HT40-][HT40+][GF][SHORT-GI-20][SHORT-GI-40] # [TX-STBC][RX-STBC123][MAX-AMSDU-7935][DSSS_CCK-40][PSMP][LSIG-TXOP-PROT] ht_capab=[HT20][HT40+][SHORT-GI-40][SHORT-GI-20] vht_capab=[MAX-MPDU-11454][MAX-A-MPDU-LEN-EXP0][SHORT-GI-80] wmm_enabled=1 wmm_ac_bk_cwmin=4 wmm_ac_bk_cwmax=10 wmm_ac_bk_aifs=7 wmm_ac_bk_txop_limit=0 wmm_ac_bk_acm=0 wmm_ac_be_aifs=3 wmm_ac_be_cwmin=4 wmm_ac_be_cwmax=10 wmm_ac_be_txop_limit=0 wmm_ac_be_acm=0 wmm_ac_vi_aifs=2 wmm_ac_vi_cwmin=3 wmm_ac_vi_cwmax=4 wmm_ac_vi_txop_limit=94 wmm_ac_vi_acm=0 wmm_ac_vo_aifs=2 wmm_ac_vo_cwmin=2 wmm_ac_vo_cwmax=3 wmm_ac_vo_txop_limit=47 wmm_ac_vo_acm=0 channel=36 vht_oper_centr_freq_seg0_idx=42 vht_oper_chwidth=1 ieee8021x=0 eapol_key_index_workaround=0 eap_server=0 own_ip_addr=127.0.0.1 # Error emulation settings. ignore_probe_probability=0.000000 ignore_auth_probability=0.000000 ignore_assoc_probability=0.000000 ignore_reassoc_probability=0.000000 corrupt_gtk_rekey_mic_probability=0.000000 Thanks, Ben -- Ben Greear Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k